summaryrefslogtreecommitdiff
path: root/doc
diff options
context:
space:
mode:
Diffstat (limited to 'doc')
-rw-r--r--doc/README.IPHASE45392
-rw-r--r--doc/README.PIP40516
-rw-r--r--doc/README.POST4
-rw-r--r--doc/README.RPXlite2
-rw-r--r--doc/README.TQM82608
-rw-r--r--doc/README.alaska822038
-rw-r--r--doc/README.bedbug16
-rw-r--r--doc/README.mpc5xx8
-rw-r--r--doc/README.mpc85xxads4
9 files changed, 49 insertions, 49 deletions
diff --git a/doc/README.IPHASE4539 b/doc/README.IPHASE4539
index b804e069a1..c5146d9b18 100644
--- a/doc/README.IPHASE4539
+++ b/doc/README.IPHASE4539
@@ -333,7 +333,7 @@ Linux:
$ make oldconfig
$ make dep
$ make uImage
- $ cp -p arch/ppc/mbxboot/uImage /tftpboot
+ $ cp -p arch/powerpc/mbxboot/uImage /tftpboot
Load uImage via tftp and boot it.
diff --git a/doc/README.PIP405 b/doc/README.PIP405
index e8a654128d..012db1c5f7 100644
--- a/doc/README.PIP405
+++ b/doc/README.PIP405
@@ -17,11 +17,11 @@ Changed files:
added console settings from environment
- common/devices.c added ISA keyboard init
- common/main.c corrected the read of bootdelay
-- arch/ppc/cpu/ppc4xx/405gp_pci.c excluded file from PIP405
-- arch/ppc/cpu/ppc4xx/i2c.c added 16bit read write I2C support
+- arch/powerpc/cpu/ppc4xx/405gp_pci.c excluded file from PIP405
+- arch/powerpc/cpu/ppc4xx/i2c.c added 16bit read write I2C support
added page write
-- arch/ppc/cpu/ppc4xx/speed.c added get_PCI_freq
-- arch/ppc/cpu/ppc4xx/start.S added CONFIG_IDENT_STRING
+- arch/powerpc/cpu/ppc4xx/speed.c added get_PCI_freq
+- arch/powerpc/cpu/ppc4xx/start.S added CONFIG_IDENT_STRING
- disk/Makefile added part_iso for CD support
- disk/part.c changed to work with block device description
added ISO CD support
@@ -275,7 +275,7 @@ Added the config variable CONFIG_IDENT_STRING which will be added to the
"U_BOOT_VERSION __TIME__ DATE___ " String, to allows to identify intermidiate
and custom versions.
Changed files:
-- arch/ppc/cpu/ppc4xx/start.s
+- arch/powerpc/cpu/ppc4xx/start.s
Firmware Image:
---------------
@@ -288,11 +288,11 @@ Changed files:
Correct PCI Frequency for PPC405:
---------------------------------
-Added function (in arch/ppc/cpu/ppc4xx/speed.c) to get the PCI frequency for PPC405 CPU.
+Added function (in arch/powerpc/cpu/ppc4xx/speed.c) to get the PCI frequency for PPC405 CPU.
The PCI Frequency will now be set correct in the board description in common/board.c.
(was set to the busfreq before).
Changed files:
-- arch/ppc/cpu/ppc4xx/speed.c
+- arch/powerpc/cpu/ppc4xx/speed.c
- common/board.c
I2C Stuff:
@@ -301,7 +301,7 @@ Added defined(CONFIG_PIP405) at several points in common/cmd_i2c.c.
Added 16bit read/write support for I2C (PPC405), and page write to
I2C EEPROM if defined CONFIG_SYS_EEPROM_PAGE_WRITE_ENABLE.
Changed files:
-- arch/ppc/cpu/ppc4xx/i2c.c
+- arch/powerpc/cpu/ppc4xx/i2c.c
- common/cmd_i2c.c
Environment / Console:
diff --git a/doc/README.POST b/doc/README.POST
index 0d5e20e977..eeb218d39c 100644
--- a/doc/README.POST
+++ b/doc/README.POST
@@ -713,7 +713,7 @@ use external loopback for testing. That will need appropriate
reconfiguration of the physical interface chip.
The test routines for the SCC ethernet tests will be located in
-arch/ppc/cpu/mpc8xx/scc.c.
+arch/powerpc/cpu/mpc8xx/scc.c.
2.2.3.2. UART tests (SMC/SCC)
@@ -725,7 +725,7 @@ will be transmitted. These tests may be enhanced to make to perform
test will be executed manually.
The test routine for the SMC/SCC UART tests will be located in
-arch/ppc/cpu/mpc8xx/serial.c.
+arch/powerpc/cpu/mpc8xx/serial.c.
2.2.3.3. USB test
diff --git a/doc/README.RPXlite b/doc/README.RPXlite
index 0aa4d11303..3ca671126d 100644
--- a/doc/README.RPXlite
+++ b/doc/README.RPXlite
@@ -116,7 +116,7 @@
board/RPXLITE/RPXLITE.c /* DRAM-related routines */
board/RPXLITE/flash.c /* flash-related routines */
board/RPXLITE/config.mk /* set text base address */
- arch/ppc/cpu/mpc8xx/serial.c /* board specific register setting */
+ arch/powerpc/cpu/mpc8xx/serial.c /* board specific register setting */
include/config_RPXLITE.h /* board specific registers */
See 'reg_config.txt' for register values in detail.
diff --git a/doc/README.TQM8260 b/doc/README.TQM8260
index e64e64a3e2..93b55068f5 100644
--- a/doc/README.TQM8260
+++ b/doc/README.TQM8260
@@ -14,10 +14,10 @@ The following common files have been modified by this project:
MAKEALL - TQM8260 entry added
Makefile - TQM8260_config entry added
-arch/ppc/cpu/mpc8260/Makefile - soft_i2c.o module added
-arch/ppc/cpu/mpc8260/ether_scc.c - TQM8260-specific definitions added, an obvious
+arch/powerpc/cpu/mpc8260/Makefile - soft_i2c.o module added
+arch/powerpc/cpu/mpc8260/ether_scc.c - TQM8260-specific definitions added, an obvious
bug fixed (fcr -> scr)
-arch/ppc/cpu/mpc8260/ether_fcc.c - TQM8260-specific definitions added
+arch/powerpc/cpu/mpc8260/ether_fcc.c - TQM8260-specific definitions added
include/flash.h - added definitions for the AM29LV640D Flash chip
@@ -33,7 +33,7 @@ board/tqm8260/config.mk - config file
board/tqm8260/flash.c - flash driver (for AM29LV640D)
board/tqm8260/ppcboot.lds - linker script
board/tqm8260/tqm8260.c - ioport and memory initialization
-arch/ppc/cpu/mpc8260/soft_i2c.c - software i2c EEPROM driver
+arch/powerpc/cpu/mpc8260/soft_i2c.c - software i2c EEPROM driver
include/config_TQM8260.h - main configuration file
diff --git a/doc/README.alaska8220 b/doc/README.alaska8220
index 9249cfb31e..334507397d 100644
--- a/doc/README.alaska8220
+++ b/doc/README.alaska8220
@@ -22,7 +22,7 @@ Changed files:
- include/asm-ppc/global_data.h added global variables - inp_clk, pci_clk,
vco_clk, pev_clk, flb_clk, and bExtUart
-- arch/ppc/lib/board.c added CONFIG_MPC8220 support
+- arch/powerpc/lib/board.c added CONFIG_MPC8220 support
- net/eth.c added FEC support for MPC8220
@@ -37,24 +37,24 @@ Added files:
- board/alaska/config.mk config make
- board/alaska/u-boot.lds Linker description
-- arch/ppc/cpu/mpc8220/dma.h multi-channel dma header file
-- arch/ppc/cpu/mpc8220/dramSetup.h dram setup header file
-- arch/ppc/cpu/mpc8220/fec.h MPC8220 FEC header file
-- arch/ppc/cpu/mpc8220/cpu.c cpu specific code
-- arch/ppc/cpu/mpc8220/cpu_init.c Flexbus ChipSelect and Mux pins setup
-- arch/ppc/cpu/mpc8220/dramSetup.c MPC8220 DDR SDRAM setup
-- arch/ppc/cpu/mpc8220/fec.c MPC8220 FEC driver
-- arch/ppc/cpu/mpc8220/i2c.c MPC8220 I2C driver
-- arch/ppc/cpu/mpc8220/interrupts.c interrupt support (not enable)
-- arch/ppc/cpu/mpc8220/loadtask.c load dma
-- arch/ppc/cpu/mpc8220/speed.c system, pci, flexbus, pev, and cpu clock
-- arch/ppc/cpu/mpc8220/traps.c exception
-- arch/ppc/cpu/mpc8220/uart.c MPC8220 UART driver
-- arch/ppc/cpu/mpc8220/Makefile Makefile
-- arch/ppc/cpu/mpc8220/config.mk config make
-- arch/ppc/cpu/mpc8220/fec_dma_task.S MPC8220 FEC multi-channel dma program
-- arch/ppc/cpu/mpc8220/io.S io functions
-- arch/ppc/cpu/mpc8220/start.S start up
+- arch/powerpc/cpu/mpc8220/dma.h multi-channel dma header file
+- arch/powerpc/cpu/mpc8220/dramSetup.h dram setup header file
+- arch/powerpc/cpu/mpc8220/fec.h MPC8220 FEC header file
+- arch/powerpc/cpu/mpc8220/cpu.c cpu specific code
+- arch/powerpc/cpu/mpc8220/cpu_init.c Flexbus ChipSelect and Mux pins setup
+- arch/powerpc/cpu/mpc8220/dramSetup.c MPC8220 DDR SDRAM setup
+- arch/powerpc/cpu/mpc8220/fec.c MPC8220 FEC driver
+- arch/powerpc/cpu/mpc8220/i2c.c MPC8220 I2C driver
+- arch/powerpc/cpu/mpc8220/interrupts.c interrupt support (not enable)
+- arch/powerpc/cpu/mpc8220/loadtask.c load dma
+- arch/powerpc/cpu/mpc8220/speed.c system, pci, flexbus, pev, and cpu clock
+- arch/powerpc/cpu/mpc8220/traps.c exception
+- arch/powerpc/cpu/mpc8220/uart.c MPC8220 UART driver
+- arch/powerpc/cpu/mpc8220/Makefile Makefile
+- arch/powerpc/cpu/mpc8220/config.mk config make
+- arch/powerpc/cpu/mpc8220/fec_dma_task.S MPC8220 FEC multi-channel dma program
+- arch/powerpc/cpu/mpc8220/io.S io functions
+- arch/powerpc/cpu/mpc8220/start.S start up
- include/mpc8220.h
diff --git a/doc/README.bedbug b/doc/README.bedbug
index 4c1e6c4d5b..35e9d2706a 100644
--- a/doc/README.bedbug
+++ b/doc/README.bedbug
@@ -18,15 +18,15 @@ can be easily implemented.
./common/board.c
Added call to initialize debugger on startup.
-./arch/ppc/cpu/ppc4xx/Makefile
+./arch/powerpc/cpu/ppc4xx/Makefile
Added bedbug_405.c to the Makefile.
-./arch/ppc/cpu/ppc4xx/start.S
+./arch/powerpc/cpu/ppc4xx/start.S
Added code to handle the debug exception (0x2000) on the 405.
Also added code to handle critical exceptions since the debug
is treated as critical on the 405.
-./arch/ppc/cpu/ppc4xx/traps.c
+./arch/powerpc/cpu/ppc4xx/traps.c
Added more detailed output for the program exception to tell
if it is an illegal instruction, privileged instruction or
a trap. Also added debug trap handler.
@@ -51,7 +51,7 @@ can be easily implemented.
hardware breakpoints and stepping through code. These
routines are common to all PowerPC processors.
-./arch/ppc/cpu/ppc4xx/bedbug_405.c
+./arch/powerpc/cpu/ppc4xx/bedbug_405.c
AMCC PPC405 specific debugger routines.
@@ -63,16 +63,16 @@ Changes:
common/cmd_bedbug.c
Added call to initialize 860 debugger.
- arch/ppc/cpu/mpc8xx/Makefile
+ arch/powerpc/cpu/mpc8xx/Makefile
Added new file "bedbug_860.c" to the makefile
- arch/ppc/cpu/mpc8xx/start.S
+ arch/powerpc/cpu/mpc8xx/start.S
Added handler for InstructionBreakpoint (0xfd00)
- arch/ppc/cpu/mpc8xx/traps.c
+ arch/powerpc/cpu/mpc8xx/traps.c
Added new routine DebugException()
New Files:
- arch/ppc/cpu/mpc8xx/bedbug_860.c
+ arch/powerpc/cpu/mpc8xx/bedbug_860.c
CPU-specific routines for 860 debug registers.
diff --git a/doc/README.mpc5xx b/doc/README.mpc5xx
index 26fb0c27dc..df51b5cf5c 100644
--- a/doc/README.mpc5xx
+++ b/doc/README.mpc5xx
@@ -25,7 +25,7 @@ Added or Changed Files:
u-boot-0.2.0/common/cmd_boot.c
u-boot-0.2.0/common/cmd_reginfo.c
u-boot-0.2.0/common/environment.c
-u-boot-0.2.0/arch/ppc/cpu/mpc5xx/*
+u-boot-0.2.0/arch/powerpc/cpu/mpc5xx/*
u-boot-0.2.0/include/cmd_reginfo.h
u-boot-0.2.0/include/common.h
u-boot-0.2.0/include/ppc_asm.tmpl
@@ -34,9 +34,9 @@ u-boot-0.2.0/include/mpc5xx.h
u-boot-0.2.0/include/status_led.h
u-boot-0.2.0/include/asm-ppc/u-boot.h
u-boot-0.2.0/include/asm-ppc/5xx_immap.h
-u-boot-0.2.0/arch/ppc/lib/board.c
-u-boot-0.2.0/arch/ppc/lib/cache.c
-u-boot-0.2.0/arch/ppc/lib/time.c
+u-boot-0.2.0/arch/powerpc/lib/board.c
+u-boot-0.2.0/arch/powerpc/lib/cache.c
+u-boot-0.2.0/arch/powerpc/lib/time.c
u-boot-0.2.0/Makefile
u-boot-0.2.0/CREDITS
u-boot-0.2.0/doc/README.mpc5xx
diff --git a/doc/README.mpc85xxads b/doc/README.mpc85xxads
index ae8202bdd1..046f981cf0 100644
--- a/doc/README.mpc85xxads
+++ b/doc/README.mpc85xxads
@@ -124,8 +124,8 @@ Updated 13-July-2004 Jon Loeliger
kernel's ppcboot.h is consistent with U-Boot's u-boot.h. You can use two
default configuration files as your starting points to configure the
kernel:
- arch/ppc/configs/mpc8540_ads_defconfig
- arch/ppc/configs/mpc8560_ads_defconfig
+ arch/powerpc/configs/mpc8540_ads_defconfig
+ arch/powerpc/configs/mpc8560_ads_defconfig
3. DEFINITIONS AND COMPILATION