diff options
Diffstat (limited to 'doc')
| -rw-r--r-- | doc/device-tree-bindings/phy/phy-mtk-tphy.txt | 78 |
1 files changed, 68 insertions, 10 deletions
diff --git a/doc/device-tree-bindings/phy/phy-mtk-tphy.txt b/doc/device-tree-bindings/phy/phy-mtk-tphy.txt index 037c5a4be5..8cd23d8c0b 100644 --- a/doc/device-tree-bindings/phy/phy-mtk-tphy.txt +++ b/doc/device-tree-bindings/phy/phy-mtk-tphy.txt @@ -7,10 +7,17 @@ controllers on MediaTek SoCs, such as, USB2.0, USB3.0, PCIe, and SATA. Required properties (controller (parent) node): - compatible : should be one of "mediatek,generic-tphy-v1" - - clocks : (deprecated, use port's clocks instead) a list of phandle + - clock-specifier pairs, one for each entry in clock-names - - clock-names : (deprecated, use port's one instead) must contain - "u3phya_ref": for reference clock of usb3.0 analog phy. + "mediatek,generic-tphy-v2" + +- #address-cells: the number of cells used to represent physical + base addresses. +- #size-cells: the number of cells used to represent the size of an address. +- ranges: the address mapping relationship to the parent, defined with + - empty value: if optional 'reg' is used. + - non-empty value: if optional 'reg' is not used. should set + the child's base address to 0, the physical address + within parent's address space, and the length of + the address map. Required nodes : a sub-node is required for each port the controller provides. Address range information including the usual @@ -27,12 +34,6 @@ Optional properties (controller (parent) node): Required properties (port (child) node): - reg : address and length of the register set for the port. -- clocks : a list of phandle + clock-specifier pairs, one for each - entry in clock-names -- clock-names : must contain - "ref": 48M reference clock for HighSpeed analog phy; and 26M - reference clock for SuperSpeed analog phy, sometimes is - 24M, 25M or 27M, depended on platform. - #phy-cells : should be 1 (See second example) cell after port phandle is phy type from: - PHY_TYPE_USB2 @@ -40,6 +41,17 @@ Required properties (port (child) node): - PHY_TYPE_PCIE - PHY_TYPE_SATA +Optional properties (port (child) node): +- clocks : a list of phandle + clock-specifier pairs, one for each + entry in clock-names +- clock-names : may contain + "ref": 48M reference clock for HighSpeed (digital) phy; and 26M + reference clock for SuperSpeed (digital) phy, sometimes is + 24M, 25M or 27M, depended on platform. + "da_ref": the reference clock of analog phy, used if the clocks + of analog and digital phys are separated, otherwise uses + "ref" clock only if needed. + Example: u3phy2: usb-phy@1a244000 { @@ -84,3 +96,49 @@ usb30: usb@11270000 { phy-names = "usb2-0", "usb3-0"; ... }; + +Layout differences of banks between TPHY V1 and V2 +------------------------------------------------------------- +IP V1: +port offset bank +shared 0x0000 SPLLC + 0x0100 FMREG +u2 port0 0x0800 U2PHY_COM +u3 port0 0x0900 U3PHYD + 0x0a00 U3PHYD_BANK2 + 0x0b00 U3PHYA + 0x0c00 U3PHYA_DA +u2 port1 0x1000 U2PHY_COM +u3 port1 0x1100 U3PHYD + 0x1200 U3PHYD_BANK2 + 0x1300 U3PHYA + 0x1400 U3PHYA_DA +u2 port2 0x1800 U2PHY_COM + ... + +IP V2: +port offset bank +u2 port0 0x0000 MISC + 0x0100 FMREG + 0x0300 U2PHY_COM +u3 port0 0x0700 SPLLC + 0x0800 CHIP + 0x0900 U3PHYD + 0x0a00 U3PHYD_BANK2 + 0x0b00 U3PHYA + 0x0c00 U3PHYA_DA +u2 port1 0x1000 MISC + 0x1100 FMREG + 0x1300 U2PHY_COM +u3 port1 0x1700 SPLLC + 0x1800 CHIP + 0x1900 U3PHYD + 0x1a00 U3PHYD_BANK2 + 0x1b00 U3PHYA + 0x1c00 U3PHYA_DA +u2 port2 0x2000 MISC + ... + + SPLLC shared by u3 ports and FMREG shared by u2 ports on +TPHY V1 are put back into each port; a new bank MISC for +u2 ports and CHIP for u3 ports are added on TPHY V2. |