diff options
Diffstat (limited to 'doc/device-tree-bindings')
-rw-r--r-- | doc/device-tree-bindings/pmic/sandbox.txt | 35 | ||||
-rw-r--r-- | doc/device-tree-bindings/regulator/sandbox.txt | 45 |
2 files changed, 80 insertions, 0 deletions
diff --git a/doc/device-tree-bindings/pmic/sandbox.txt b/doc/device-tree-bindings/pmic/sandbox.txt new file mode 100644 index 00000000000..d84c97717b3 --- /dev/null +++ b/doc/device-tree-bindings/pmic/sandbox.txt @@ -0,0 +1,35 @@ +Sandbox pmic + +This device uses two drivers: +- drivers/power/pmic/sandbox.c (for parent device) +- drivers/power/regulator/sandbox.c (for child regulators) + +This file describes the binding info for the PMIC driver. + +To bind the regulators, please read the regulator binding info: +- doc/device-tree-bindings/regulator/sandbox.txt + +Required PMIC node properties: +- compatible: "sandbox,pmic" +- reg = 0x40 + +Required PMIC's "emul" subnode, with property: +- compatible: "sandbox,i2c-pmic" + +With the above properties, the pmic device can be used for read/write only. +To bind each regulator, the optional regulator subnodes should exists. + +Optional subnodes: +- ldo/buck subnodes of each device's regulator (see regulator binding info) + +Example: + +sandbox_pmic { + compatible = "sandbox,pmic"; + reg = <0x40>; + + /* Mandatory for I/O */ + emul { + compatible = "sandbox,i2c-pmic"; + }; +}; diff --git a/doc/device-tree-bindings/regulator/sandbox.txt b/doc/device-tree-bindings/regulator/sandbox.txt new file mode 100644 index 00000000000..d70494c4506 --- /dev/null +++ b/doc/device-tree-bindings/regulator/sandbox.txt @@ -0,0 +1,45 @@ +Sandbox, PMIC regulators + +This device uses two drivers: +- drivers/power/pmic/sandbox.c (as parent I/O device) +- drivers/power/regulator/sandbox.c (for child regulators) + +This file describes the binding info for the REGULATOR driver. + +First, please read the binding info for the PMIC: +- doc/device-tree-bindings/pmic/sandbox.txt + +Required subnodes: +- ldoN { }; +- buckN { }; + +The sandbox PMIC can support: ldo1, ldo2, buck1, buck2. + +For each PMIC's regulator subnode, there is one required property: +- regulator-name: used for regulator uclass platform data '.name' + +Optional: +- regulator-min-microvolt: minimum allowed Voltage to set +- regulator-max-microvolt: minimum allowed Voltage to set +- regulator-min-microamps: minimum allowed Current limit to set (LDO1/BUCK1) +- regulator-max-microamps: minimum allowed Current limit to set (LDO1/BUCK1) +- regulator-always-on: regulator should be never disabled +- regulator-boot-on: regulator should be enabled by the bootloader + +Example PMIC's regulator subnodes: + +ldo1 { + regulator-name = "VDD_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1200000>; + regulator-min-microamps = <100000>; + regulator-max-microamps = <400000>; + regulator-always-on; +}; + +buck2 { + regulator-name = "VDD_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; +}; |