diff options
Diffstat (limited to 'doc/board/amlogic/p201.rst')
| -rw-r--r-- | doc/board/amlogic/p201.rst | 102 |
1 files changed, 102 insertions, 0 deletions
diff --git a/doc/board/amlogic/p201.rst b/doc/board/amlogic/p201.rst new file mode 100644 index 0000000000..06da933a2a --- /dev/null +++ b/doc/board/amlogic/p201.rst @@ -0,0 +1,102 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +U-Boot for Amlogic P201 +======================= + +P201 is a reference board manufactured by Amlogic with the following +specifications: + + - Amlogic S905 ARM Cortex-A53 quad-core SoC @ 1.5GHz + - ARM Mali 450 GPU + - 2GB DDR3 SDRAM + - 10/100 Ethernet + - HDMI 2.0 4K/60Hz display + - 2 x USB 2.0 Host + - eMMC, microSD + - Infrared receiver + - SDIO WiFi Module + - CVBS+Stereo Audio Jack + +Schematics are available from Amlogic on demand. + +U-Boot compilation +------------------ + +.. code-block:: bash + + $ export CROSS_COMPILE=aarch64-none-elf- + $ make p201_defconfig + $ make + +Image creation +-------------- + +Amlogic doesn't provide sources for the firmware and for tools needed +to create the bootloader image, so it is necessary to obtain them from +the git tree published by the board vendor: + +.. code-block:: bash + + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + $ tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + $ tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + $ export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH + $ git clone https://github.com/BayLibre/u-boot.git -b n-amlogic-openlinux-20170606 amlogic-u-boot + $ cd amlogic-u-boot + $ make gxb_p201_v1_defconfig + $ make + $ export FIPDIR=$PWD/fip + +Go back to mainline U-boot source tree then : + +.. code-block:: bash + + $ mkdir fip + + $ cp $FIPDIR/gxl/bl2.bin fip/ + $ cp $FIPDIR/gxl/acs.bin fip/ + $ cp $FIPDIR/gxl/bl21.bin fip/ + $ cp $FIPDIR/gxl/bl30.bin fip/ + $ cp $FIPDIR/gxl/bl301.bin fip/ + $ cp $FIPDIR/gxl/bl31.img fip/ + $ cp u-boot.bin fip/bl33.bin + + $ $FIPDIR/blx_fix.sh \ + fip/bl30.bin \ + fip/zero_tmp \ + fip/bl30_zero.bin \ + fip/bl301.bin \ + fip/bl301_zero.bin \ + fip/bl30_new.bin \ + bl30 + + $ $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 + + $ $FIPDIR/blx_fix.sh \ + fip/bl2_acs.bin \ + fip/zero_tmp \ + fip/bl2_zero.bin \ + fip/bl21.bin \ + fip/bl21_zero.bin \ + fip/bl2_new.bin \ + bl2 + + $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin + $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img + $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin + $ $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig + $ $FIPDIR/gxl/aml_encrypt_gxl --bootmk \ + --output fip/u-boot.bin \ + --bl2 fip/bl2.n.bin.sig \ + --bl30 fip/bl30_new.bin.enc \ + --bl31 fip/bl31.img.enc \ + --bl33 fip/bl33.bin.enc + +and then write the image to SD with: + +.. code-block:: bash + + $ DEV=/dev/your_sd_device + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 |