1 files changed, 63 insertions, 0 deletions
diff --git a/doc/board/amlogic/odroid-c2.rst b/doc/board/amlogic/odroid-c2.rst
new file mode 100644
index 00000000000..966c18b36eb
--- /dev/null
+++ b/doc/board/amlogic/odroid-c2.rst
@@ -0,0 +1,63 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+U-Boot for ODROID-C2
+====================
+
+ODROID-C2 is a single board computer manufactured by Hardkernel
+Co. Ltd with the following specifications:
+
+ - Amlogic S905 ARM Cortex-A53 quad-core SoC @ 2GHz
+ - ARM Mali 450 GPU
+ - 2GB DDR3 SDRAM
+ - Gigabit Ethernet
+ - HDMI 2.0 4K/60Hz display
+ - 40-pin GPIO header
+ - 4 x USB 2.0 Host, 1 x USB OTG
+ - eMMC, microSD
+ - Infrared receiver
+
+Schematics are available on the manufacturer website.
+
+U-Boot compilation
+------------------
+
+.. code-block:: bash
+
+    $ export CROSS_COMPILE=aarch64-none-elf-
+    $ make odroid-c2_defconfig
+    $ make
+
+Image creation
+--------------
+
+Amlogic doesn't provide sources for the firmware and for tools needed
+to create the bootloader image, so it is necessary to obtain them from
+the git tree published by the board vendor:
+
+.. code-block:: bash
+
+    $ DIR=odroid-c2
+    $ git clone --depth 1 \
+       https://github.com/hardkernel/u-boot.git -b odroidc2-v2015.01 \
+       $DIR
+    $ $DIR/fip/fip_create --bl30  $DIR/fip/gxb/bl30.bin \
+                       --bl301 $DIR/fip/gxb/bl301.bin \
+                       --bl31  $DIR/fip/gxb/bl31.bin \
+                       --bl33  u-boot.bin \
+                       $DIR/fip.bin
+    $ $DIR/fip/fip_create --dump $DIR/fip.bin
+    $ cat $DIR/fip/gxb/bl2.package $DIR/fip.bin > $DIR/boot_new.bin
+    $ $DIR/fip/gxb/aml_encrypt_gxb --bootsig \
+                                --input $DIR/boot_new.bin \
+                                --output $DIR/u-boot.img
+    $ dd if=$DIR/u-boot.img of=$DIR/u-boot.gxbb bs=512 skip=96
+
+and then write the image to SD with:
+
+.. code-block:: bash
+
+    $ DEV=/dev/your_sd_device
+    $ BL1=$DIR/sd_fuse/bl1.bin.hardkernel
+    $ dd if=$BL1 of=$DEV conv=fsync bs=1 count=442
+    $ dd if=$BL1 of=$DEV conv=fsync bs=512 skip=1 seek=1
+    $ dd if=$DIR/u-boot.gxbb of=$DEV conv=fsync bs=512 seek=97