diff options
Diffstat (limited to 'doc/README.marubun-pcmcia')
| -rw-r--r-- | doc/README.marubun-pcmcia | 65 |
1 files changed, 0 insertions, 65 deletions
diff --git a/doc/README.marubun-pcmcia b/doc/README.marubun-pcmcia deleted file mode 100644 index 0a363b2ada..0000000000 --- a/doc/README.marubun-pcmcia +++ /dev/null @@ -1,65 +0,0 @@ - -U-Boot MARUBUN MR-SHPC-01 PCMCIA controller driver - Last update 21/11/2007 by Nobuhiro Iwamatsu - -======================================================================================== - -0. What's this? - This driver supports MARUBUN MR-SHPC-01. - url: http://www.marubun.co.jp/product/semicon/devices/qgc18e0000002n2z.html - (Sorry Japanese only.) - - This chip is used with SuperH well, and adopted by the - reference board. - ex. * MS7750SE01 - * MS7722SE01 - * other - - This chip doesn't support CardBus. - -1. base source code - The code is based on sources from the Linux kernel - ( arch/sh/kernel/cf-enabler.c ). - -2. How to use - The options you have to specify in the config file are (with the - value for my board as an example): - - * CONFIG_MARUBUN_PCCARD - If you want to use this device driver, should define CONFIG_MARUBUN_PCCARD. - ex. #define CONFIG_MARUBUN_PCCARD - - * CONFIG_PCMCIA_SLOT_A - Most devices have only one slot. You should define CONFIG_PCMCIA_SLOT_A . - ex. #define CONFIG_PCMCIA_SLOT_A 1 - - * CONFIG_SYS_MARUBUN_MRSHPC - This is MR-SHPC-01 PCMCIA controller base address. - You should do the setting matched to your environment. - ex. #define CONFIG_SYS_MARUBUN_MRSHPC 0xb03fffe0 - ( for MS7722SE01 environment ) - - * CONFIG_SYS_MARUBUN_MW1 - This is MR-SHPC-01 memory window base address. - You should do the setting matched to your environment. - ex. #define CONFIG_SYS_MARUBUN_MW1 0xb0400000 - ( for MS7722SE01 environment ) - - * CONFIG_SYS_MARUBUN_MW1 - This is MR-SHPC-01 attribute window base address. - You should do the setting matched to your environment. - ex. #define CONFIG_SYS_MARUBUN_MW2 0xb0500000 - ( for MS7722SE01 environment ) - - * CONFIG_SYS_MARUBUN_MW1 - This is MR-SHPC-01 I/O window base address. - You should do the setting matched to your environment. - ex. #define CONFIG_SYS_MARUBUN_IO 0xb0600000 - ( for MS7722SE01 environment ) - -3. Other - * Check Compact Flash only. - * Maybe, NE2000 compatible NIC is sure to move. - -Copyright (c) 2007 - Nobuhiro Iwamatsu <iwamatsu@nigaur.org> |