summaryrefslogtreecommitdiff
path: root/cpu/mpc83xx/spd_sdram.c
diff options
context:
space:
mode:
Diffstat (limited to 'cpu/mpc83xx/spd_sdram.c')
-rw-r--r--cpu/mpc83xx/spd_sdram.c61
1 files changed, 49 insertions, 12 deletions
diff --git a/cpu/mpc83xx/spd_sdram.c b/cpu/mpc83xx/spd_sdram.c
index 06a7da8f06..b4012a8ddf 100644
--- a/cpu/mpc83xx/spd_sdram.c
+++ b/cpu/mpc83xx/spd_sdram.c
@@ -1,4 +1,7 @@
/*
+ * (C) Copyright 2006
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
* Copyright 2004 Freescale Semiconductor.
* (C) Copyright 2003 Motorola Inc.
* Xianghua Xiao (X.Xiao@motorola.com)
@@ -73,7 +76,32 @@ int read_spd(uint addr)
return ((int) addr);
}
-long int spd_sdram(int(read_spd)(uint addr))
+#undef SPD_DEBUG
+#ifdef SPD_DEBUG
+static void spd_debug(spd_eeprom_t *spd)
+{
+ printf ("\nDIMM type: %-18.18s\n", spd->mpart);
+ printf ("SPD size: %d\n", spd->info_size);
+ printf ("EEPROM size: %d\n", 1 << spd->chip_size);
+ printf ("Memory type: %d\n", spd->mem_type);
+ printf ("Row addr: %d\n", spd->nrow_addr);
+ printf ("Column addr: %d\n", spd->ncol_addr);
+ printf ("# of rows: %d\n", spd->nrows);
+ printf ("Row density: %d\n", spd->row_dens);
+ printf ("# of banks: %d\n", spd->nbanks);
+ printf ("Data width: %d\n",
+ 256 * spd->dataw_msb + spd->dataw_lsb);
+ printf ("Chip width: %d\n", spd->primw);
+ printf ("Refresh rate: %02X\n", spd->refresh);
+ printf ("CAS latencies: %02X\n", spd->cas_lat);
+ printf ("Write latencies: %02X\n", spd->write_lat);
+ printf ("tRP: %d\n", spd->trp);
+ printf ("tRCD: %d\n", spd->trcd);
+ printf ("\n");
+}
+#endif /* SPD_DEBUG */
+
+long int spd_sdram()
{
volatile immap_t *immap = (immap_t *)CFG_IMMRBAR;
volatile ddr8349_t *ddr = &immap->ddr;
@@ -85,10 +113,10 @@ long int spd_sdram(int(read_spd)(uint addr))
unsigned char caslat;
unsigned int trfc, trfc_clk, trfc_low;
-#warning Current spd_sdram does not fit its usage... adjust implementation or API...
-
CFG_READ_SPD(SPD_EEPROM_ADDRESS, 0, 1, (uchar *) & spd, sizeof (spd));
-
+#ifdef SPD_DEBUG
+ spd_debug(&spd);
+#endif
if (spd.nrows > 2) {
puts("DDR:Only two chip selects are supported on ADS.\n");
return 0;
@@ -223,25 +251,31 @@ long int spd_sdram(int(read_spd)(uint addr))
* Only DDR I is supported
* DDR I and II have different mode-register-set definition
*/
-
- /* burst length is always 4 */
switch(caslat) {
case 2:
- ddr->sdram_mode = 0x52; /* 1.5 */
+ tmp = 0x50; /* 1.5 */
break;
case 3:
- ddr->sdram_mode = 0x22; /* 2.0 */
+ tmp = 0x20; /* 2.0 */
break;
case 4:
- ddr->sdram_mode = 0x62; /* 2.5 */
+ tmp = 0x60; /* 2.5 */
break;
case 5:
- ddr->sdram_mode = 0x32; /* 3.0 */
+ tmp = 0x30; /* 3.0 */
break;
default:
puts("DDR:only CAS Latency 1.5, 2.0, 2.5, 3.0 is supported.\n");
return 0;
}
+#if defined (CONFIG_DDR_32BIT)
+ /* set burst length to 8 for 32-bit data path */
+ tmp |= 0x03;
+#else
+ /* set burst length to 4 - default for 64-bit data path */
+ tmp |= 0x02;
+#endif
+ ddr->sdram_mode = tmp;
debug("DDR:sdram_mode=0x%08x\n", ddr->sdram_mode);
switch(spd.refresh) {
@@ -321,6 +355,10 @@ long int spd_sdram(int(read_spd)(uint addr))
*/
tmp = 0xc2000000;
+#if defined (CONFIG_DDR_32BIT)
+ /* in 32-Bit mode burst len is 8 beats */
+ tmp |= (SDRAM_CFG_32_BE | SDRAM_CFG_8_BE);
+#endif
/*
* sdram_cfg[3] = RD_EN - registered DIMM enable
* A value of 0x26 indicates micron registered DIMMS (micron.com)
@@ -350,8 +388,7 @@ long int spd_sdram(int(read_spd)(uint addr))
udelay(500);
debug("DDR:sdram_cfg=0x%08x\n", ddr->sdram_cfg);
-
- return memsize;/*in MBytes*/
+ return memsize; /*in MBytes*/
}
#endif /* CONFIG_SPD_EEPROM */