summaryrefslogtreecommitdiff
path: root/cpu/mpc8260/pci.c
diff options
context:
space:
mode:
Diffstat (limited to 'cpu/mpc8260/pci.c')
-rw-r--r--cpu/mpc8260/pci.c244
1 files changed, 244 insertions, 0 deletions
diff --git a/cpu/mpc8260/pci.c b/cpu/mpc8260/pci.c
new file mode 100644
index 00000000000..f9f1e27d109
--- /dev/null
+++ b/cpu/mpc8260/pci.c
@@ -0,0 +1,244 @@
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#ifdef CONFIG_PCI
+
+#include <pci.h>
+#include <asm/m8260_pci.h>
+
+/*
+ * Local->PCI map (from CPU) controlled by
+ * MPC826x master window
+ *
+ * 0x80000000 - 0xBFFFFFFF Total CPU2PCI space PCIBR0
+ *
+ * 0x80000000 - 0x8FFFFFFF PCI Mem with prefetch (Outbound ATU #1)
+ * 0x90000000 - 0x9FFFFFFF PCI Mem w/o prefetch (Outbound ATU #2)
+ * 0xA0000000 - 0xAFFFFFFF 32-bit PCI IO (Outbound ATU #3)
+ *
+ * PCI->Local map (from PCI)
+ * MPC826x slave window controlled by
+ *
+ * 0x00000000 - 0x07FFFFFF MPC826x local memory (Inbound ATU #1)
+ */
+
+/*
+ * Slave window that allows PCI masters to access MPC826x local memory.
+ * This window is set up using the first set of Inbound ATU registers
+ */
+
+#define PCI_SLV_MEM_LOCAL CFG_SDRAM_BASE /* Local base */
+#define PCI_SLV_MEM_BUS 0x00000000 /* PCI base */
+#define PICMR0_MASK_ATTRIB (PICMR_MASK_512MB | PICMR_ENABLE | \
+ PICMR_PREFETCH_EN)
+
+/*
+ * This is the window that allows the CPU to access PCI address space.
+ * It will be setup with the SIU PCIBR0 register. All three PCI master
+ * windows, which allow the CPU to access PCI prefetch, non prefetch,
+ * and IO space (see below), must all fit within this window.
+ */
+
+#define PCI_MSTR_LOCAL 0x80000000 /* Local base */
+#define PCIMSK0_MASK PCIMSK_1GB /* Size of window */
+
+/*
+ * Master window that allows the CPU to access PCI Memory (prefetch).
+ * This window will be setup with the first set of Outbound ATU registers
+ * in the bridge.
+ */
+
+#define PCI_MSTR_MEM_LOCAL 0x80000000 /* Local base */
+#define PCI_MSTR_MEM_BUS 0x80000000 /* PCI base */
+#define CPU_PCI_MEM_START PCI_MSTR_MEM_LOCAL
+#define PCI_MSTR_MEM_SIZE 0x10000000 /* 256MB */
+#define POCMR0_MASK_ATTRIB (POCMR_MASK_256MB | POCMR_ENABLE | POCMR_PREFETCH_EN)
+
+/*
+ * Master window that allows the CPU to access PCI Memory (non-prefetch).
+ * This window will be setup with the second set of Outbound ATU registers
+ * in the bridge.
+ */
+
+#define PCI_MSTR_MEMIO_LOCAL 0x90000000 /* Local base */
+#define PCI_MSTR_MEMIO_BUS 0x90000000 /* PCI base */
+#define CPU_PCI_MEMIO_START PCI_MSTR_MEMIO_LOCAL
+#define PCI_MSTR_MEMIO_SIZE 0x10000000 /* 256MB */
+#define POCMR1_MASK_ATTRIB (POCMR_MASK_256MB | POCMR_ENABLE)
+
+/*
+ * Master window that allows the CPU to access PCI IO space.
+ * This window will be setup with the third set of Outbound ATU registers
+ * in the bridge.
+ */
+
+#define PCI_MSTR_IO_LOCAL 0xA0000000 /* Local base */
+#define PCI_MSTR_IO_BUS 0xA0000000 /* PCI base */
+#define CPU_PCI_IO_START PCI_MSTR_IO_LOCAL
+#define PCI_MSTR_IO_SIZE 0x10000000 /* 256MB */
+#define POCMR2_MASK_ATTRIB (POCMR_MASK_256MB | POCMR_ENABLE | POCMR_PCI_IO)
+
+/* PCI bus configuration registers.
+ */
+
+#define PCI_CLASS_BRIDGE_CTLR 0x06
+
+
+static inline void pci_outl(u32 addr, u32 data)
+{
+ *(volatile u32 *) addr = cpu_to_le32(data);
+}
+
+void pci_mpc8250_init(struct pci_controller *hose)
+{
+ u16 tempShort;
+ u32 immr_addr = CFG_IMMR;
+ volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ pci_dev_t host_devno = PCI_BDF(0, 0, 0);
+
+ pci_setup_indirect(hose, CFG_IMMR + PCI_CFG_ADDR_REG,
+ CFG_IMMR + PCI_CFG_DATA_REG);
+
+ /*
+ * Setting required to enable IRQ1-IRQ7 (SIUMCR [DPPC]),
+ * and local bus for PCI (SIUMCR [LBPC]).
+ */
+ immap->im_siu_conf.sc_siumcr = 0x00640000;
+
+ /* Make PCI lowest priority */
+ /* Each 4 bits is a device bus request and the MS 4bits
+ is highest priority */
+ /* Bus 4bit value
+ --- ----------
+ CPM high 0b0000
+ CPM middle 0b0001
+ CPM low 0b0010
+ PCI reguest 0b0011
+ Reserved 0b0100
+ Reserved 0b0101
+ Internal Core 0b0110
+ External Master 1 0b0111
+ External Master 2 0b1000
+ External Master 3 0b1001
+ The rest are reserved */
+ immap->im_siu_conf.sc_ppc_alrh = 0x61207893;
+
+ /* Park bus on core while modifying PCI Bus accesses */
+ immap->im_siu_conf.sc_ppc_acr = 0x6;
+
+ /*
+ * Set up master window that allows the CPU to access PCI space. This
+ * window is set up using the first SIU PCIBR registers.
+ */
+ *(volatile unsigned long*)(immr_addr + M8265_PCIMSK0) = PCIMSK0_MASK;
+ *(volatile unsigned long*)(immr_addr + M8265_PCIBR0) =
+ PCI_MSTR_LOCAL | PCIBR_ENABLE;
+
+ /* Release PCI RST (by default the PCI RST signal is held low) */
+ pci_outl (immr_addr | PCI_GCR_REG, PCIGCR_PCI_BUS_EN);
+
+ /* give it some time */
+ udelay(1000);
+
+ /*
+ * Set up master window that allows the CPU to access PCI Memory (prefetch)
+ * space. This window is set up using the first set of Outbound ATU registers.
+ */
+ pci_outl (immr_addr | POTAR_REG0, PCI_MSTR_MEM_BUS >> 12); /* PCI base */
+ pci_outl (immr_addr | POBAR_REG0, PCI_MSTR_MEM_LOCAL >> 12); /* Local base */
+ pci_outl (immr_addr | POCMR_REG0, POCMR0_MASK_ATTRIB); /* Size & attribute */
+
+ /*
+ * Set up master window that allows the CPU to access PCI Memory (non-prefetch)
+ * space. This window is set up using the second set of Outbound ATU registers.
+ */
+ pci_outl (immr_addr | POTAR_REG1, PCI_MSTR_MEMIO_BUS >> 12); /* PCI base */
+ pci_outl (immr_addr | POBAR_REG1, PCI_MSTR_MEMIO_LOCAL >> 12); /* Local base */
+ pci_outl (immr_addr | POCMR_REG1, POCMR1_MASK_ATTRIB); /* Size & attribute */
+
+ /*
+ * Set up master window that allows the CPU to access PCI IO space. This window
+ * is set up using the third set of Outbound ATU registers.
+ */
+ pci_outl (immr_addr | POTAR_REG2, PCI_MSTR_IO_BUS >> 12); /* PCI base */
+ pci_outl (immr_addr | POBAR_REG2, PCI_MSTR_IO_LOCAL >> 12); /* Local base */
+ pci_outl (immr_addr | POCMR_REG2, POCMR2_MASK_ATTRIB); /* Size & attribute */
+
+ /*
+ * Set up slave window that allows PCI masters to access MPC826x local memory.
+ * This window is set up using the first set of Inbound ATU registers
+ */
+ pci_outl (immr_addr | PITAR_REG0, PCI_SLV_MEM_LOCAL >> 12); /* Local base */
+ pci_outl (immr_addr | PIBAR_REG0, PCI_SLV_MEM_BUS >> 12); /* PCI base */
+ pci_outl (immr_addr | PICMR_REG0, PICMR0_MASK_ATTRIB); /* Size & attribute */
+
+ /* See above for description - puts PCI request as highest priority */
+ immap->im_siu_conf.sc_ppc_alrh = 0x03124567;
+
+ /* Park the bus on the PCI */
+ immap->im_siu_conf.sc_ppc_acr = PPC_ACR_BUS_PARK_PCI;
+
+ /* Host mode - specify the bridge as a host-PCI bridge */
+
+ pci_hose_write_config_byte(hose, host_devno, PCI_CLASS_CODE,
+ PCI_CLASS_BRIDGE_CTLR);
+
+ /* Enable the host bridge to be a master on the PCI bus, and to act as a PCI memory target */
+ pci_hose_read_config_word(hose, host_devno, PCI_COMMAND, &tempShort);
+ pci_hose_write_config_word(hose, host_devno, PCI_COMMAND,
+ tempShort | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
+
+ hose->first_busno = 0;
+ hose->last_busno = 0xff;
+
+ /* System memory space */
+ pci_set_region(hose->regions + 0,
+ CFG_SDRAM_BASE,
+ CFG_SDRAM_BASE,
+ 0x4000000,
+ PCI_REGION_MEM | PCI_REGION_MEMORY);
+
+ /* PCI memory space */
+ pci_set_region(hose->regions + 1,
+ PCI_MSTR_MEM_BUS,
+ PCI_MSTR_MEM_LOCAL,
+ PCI_MSTR_MEM_SIZE,
+ PCI_REGION_MEM);
+
+ /* PCI I/O space */
+ pci_set_region(hose->regions + 2,
+ PCI_MSTR_IO_BUS,
+ PCI_MSTR_IO_LOCAL,
+ PCI_MSTR_IO_SIZE,
+ PCI_REGION_IO);
+
+ hose->region_count = 3;
+
+ pci_register_hose(hose);
+
+ hose->last_busno = pci_hose_scan(hose);
+}
+
+#endif /* CONFIG_PCI */