diff options
Diffstat (limited to 'cpu/mpc512x/start.S')
| -rw-r--r-- | cpu/mpc512x/start.S | 711 |
1 files changed, 0 insertions, 711 deletions
diff --git a/cpu/mpc512x/start.S b/cpu/mpc512x/start.S deleted file mode 100644 index d26b61707e..0000000000 --- a/cpu/mpc512x/start.S +++ /dev/null @@ -1,711 +0,0 @@ -/* - * Copyright (C) 1998 Dan Malek <dmalek@jlc.net> - * Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se> - * Copyright (C) 2000-2009 Wolfgang Denk <wd@denx.de> - * Copyright Freescale Semiconductor, Inc. 2004, 2006. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - * Based on the MPC83xx code. - */ - -/* - * U-Boot - Startup Code for MPC512x based Embedded Boards - */ - -#include <config.h> -#include <timestamp.h> -#include <version.h> - -#define CONFIG_521X 1 /* needed for Linux kernel header files*/ - -#include <asm/immap_512x.h> -#include "asm-offsets.h" - -#include <ppc_asm.tmpl> -#include <ppc_defs.h> - -#include <asm/cache.h> -#include <asm/mmu.h> - -#ifndef CONFIG_IDENT_STRING -#define CONFIG_IDENT_STRING "MPC512X" -#endif - -/* - * Floating Point enable, Machine Check and Recoverable Interr. - */ -#undef MSR_KERNEL -#ifdef DEBUG -#define MSR_KERNEL (MSR_FP|MSR_RI) -#else -#define MSR_KERNEL (MSR_FP|MSR_ME|MSR_RI) -#endif - -/* Macros for manipulating CSx_START/STOP */ -#define START_REG(start) ((start) >> 16) -#define STOP_REG(start, size) (((start) + (size) - 1) >> 16) - -/* - * Set up GOT: Global Offset Table - * - * Use r12 to access the GOT - */ - START_GOT - GOT_ENTRY(_GOT2_TABLE_) - GOT_ENTRY(_FIXUP_TABLE_) - - GOT_ENTRY(_start) - GOT_ENTRY(_start_of_vectors) - GOT_ENTRY(_end_of_vectors) - GOT_ENTRY(transfer_to_handler) - - GOT_ENTRY(__init_end) - GOT_ENTRY(_end) - GOT_ENTRY(__bss_start) - END_GOT - -/* - * Magic number and version string - */ - .long 0x27051956 /* U-Boot Magic Number */ - .globl version_string -version_string: - .ascii U_BOOT_VERSION - .ascii " (", U_BOOT_DATE, " - ", U_BOOT_TIME, ")" - .ascii " ", CONFIG_IDENT_STRING, "\0" - -/* - * Vector Table - */ - .text - . = EXC_OFF_SYS_RESET - - .globl _start - /* Start from here after reset/power on */ -_start: - li r21, BOOTFLAG_COLD /* Normal Power-On: Boot from FLASH */ - b boot_cold - - .globl _start_of_vectors -_start_of_vectors: - -/* Machine check */ - STD_EXCEPTION(0x200, MachineCheck, MachineCheckException) - -/* Data Storage exception. */ - STD_EXCEPTION(0x300, DataStorage, UnknownException) - -/* Instruction Storage exception. */ - STD_EXCEPTION(0x400, InstStorage, UnknownException) - -/* External Interrupt exception. */ - STD_EXCEPTION(0x500, ExtInterrupt, UnknownException) - -/* Alignment exception. */ - . = 0x600 -Alignment: - EXCEPTION_PROLOG(SRR0, SRR1) - mfspr r4,DAR - stw r4,_DAR(r21) - mfspr r5,DSISR - stw r5,_DSISR(r21) - addi r3,r1,STACK_FRAME_OVERHEAD - EXC_XFER_TEMPLATE(Alignment, AlignmentException, MSR_KERNEL, COPY_EE) - -/* Program check exception */ - . = 0x700 -ProgramCheck: - EXCEPTION_PROLOG(SRR0, SRR1) - addi r3,r1,STACK_FRAME_OVERHEAD - EXC_XFER_TEMPLATE(ProgramCheck, ProgramCheckException, - MSR_KERNEL, COPY_EE) - -/* Floating Point Unit unavailable exception */ - STD_EXCEPTION(0x800, FPUnavailable, UnknownException) - -/* Decrementer */ - STD_EXCEPTION(0x900, Decrementer, timer_interrupt) - -/* Critical interrupt */ - STD_EXCEPTION(0xa00, Critical, UnknownException) - -/* System Call */ - STD_EXCEPTION(0xc00, SystemCall, UnknownException) - -/* Trace interrupt */ - STD_EXCEPTION(0xd00, Trace, UnknownException) - -/* Performance Monitor interrupt */ - STD_EXCEPTION(0xf00, PerfMon, UnknownException) - -/* Intruction Translation Miss */ - STD_EXCEPTION(0x1000, InstructionTLBMiss, UnknownException) - -/* Data Load Translation Miss */ - STD_EXCEPTION(0x1100, DataLoadTLBMiss, UnknownException) - -/* Data Store Translation Miss */ - STD_EXCEPTION(0x1200, DataStoreTLBMiss, UnknownException) - -/* Instruction Address Breakpoint */ - STD_EXCEPTION(0x1300, InstructionAddrBreakpoint, DebugException) - -/* System Management interrupt */ - STD_EXCEPTION(0x1400, SystemMgmtInterrupt, UnknownException) - - .globl _end_of_vectors -_end_of_vectors: - - . = 0x3000 -boot_cold: - /* Save msr contents */ - mfmsr r5 - - /* Set IMMR area to our preferred location */ - lis r4, CONFIG_DEFAULT_IMMR@h - lis r3, CONFIG_SYS_IMMR@h - ori r3, r3, CONFIG_SYS_IMMR@l - stw r3, IMMRBAR(r4) - mtspr MBAR, r3 /* IMMRBAR is mirrored into the MBAR SPR (311) */ - - /* Initialise the machine */ - bl cpu_early_init - - /* - * Set up Local Access Windows: - * - * 1) Boot/CS0 (boot FLASH) - * 2) On-chip SRAM (initial stack purposes) - */ - - /* Boot CS/CS0 window range */ - lis r3, CONFIG_SYS_IMMR@h - ori r3, r3, CONFIG_SYS_IMMR@l - - lis r4, START_REG(CONFIG_SYS_FLASH_BASE) - ori r4, r4, STOP_REG(CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_SIZE) - stw r4, LPCS0AW(r3) - - /* - * The SRAM window has a fixed size (256K), so only the start address - * is necessary - */ - lis r4, START_REG(CONFIG_SYS_SRAM_BASE) & 0xff00 - stw r4, SRAMBAR(r3) - - /* - * According to MPC5121e RM, configuring local access windows should - * be followed by a dummy read of the config register that was - * modified last and an isync - */ - lwz r4, SRAMBAR(r3) - isync - - /* - * Set configuration of the Boot/CS0, the SRAM window does not have a - * config register so no params can be set for it - */ - lis r3, (CONFIG_SYS_IMMR + LPC_OFFSET)@h - ori r3, r3, (CONFIG_SYS_IMMR + LPC_OFFSET)@l - - lis r4, CONFIG_SYS_CS0_CFG@h - ori r4, r4, CONFIG_SYS_CS0_CFG@l - stw r4, CS0_CONFIG(r3) - - /* Master enable all CS's */ - lis r4, CS_CTRL_ME@h - ori r4, r4, CS_CTRL_ME@l - stw r4, CS_CTRL(r3) - - lis r4, (CONFIG_SYS_MONITOR_BASE)@h - ori r4, r4, (CONFIG_SYS_MONITOR_BASE)@l - addi r5, r4, in_flash - _start + EXC_OFF_SYS_RESET - mtlr r5 - blr - -in_flash: - lis r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET)@h - ori r1, r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET)@l - - li r0, 0 /* Make room for stack frame header and */ - stwu r0, -4(r1) /* clear final stack frame so that */ - stwu r0, -4(r1) /* stack backtraces terminate cleanly */ - - /* let the C-code set up the rest */ - /* */ - /* Be careful to keep code relocatable & stack humble */ - /*------------------------------------------------------*/ - - GET_GOT /* initialize GOT access */ - - /* r3: IMMR */ - lis r3, CONFIG_SYS_IMMR@h - /* run low-level CPU init code (in Flash) */ - bl cpu_init_f - - /* r3: BOOTFLAG */ - mr r3, r21 - /* run 1st part of board init code (in Flash) */ - bl board_init_f - - /* NOTREACHED - board_init_f() does not return */ - -/* - * This code finishes saving the registers to the exception frame - * and jumps to the appropriate handler for the exception. - * Register r21 is pointer into trap frame, r1 has new stack pointer. - */ - .globl transfer_to_handler -transfer_to_handler: - stw r22,_NIP(r21) - lis r22,MSR_POW@h - andc r23,r23,r22 - stw r23,_MSR(r21) - SAVE_GPR(7, r21) - SAVE_4GPRS(8, r21) - SAVE_8GPRS(12, r21) - SAVE_8GPRS(24, r21) - mflr r23 - andi. r24,r23,0x3f00 /* get vector offset */ - stw r24,TRAP(r21) - li r22,0 - stw r22,RESULT(r21) - lwz r24,0(r23) /* virtual address of handler */ - lwz r23,4(r23) /* where to go when done */ - mtspr SRR0,r24 - mtspr SRR1,r20 - mtlr r23 - SYNC - rfi /* jump to handler, enable MMU */ - -int_return: - mfmsr r28 /* Disable interrupts */ - li r4,0 - ori r4,r4,MSR_EE - andc r28,r28,r4 - SYNC /* Some chip revs need this... */ - mtmsr r28 - SYNC - lwz r2,_CTR(r1) - lwz r0,_LINK(r1) - mtctr r2 - mtlr r0 - lwz r2,_XER(r1) - lwz r0,_CCR(r1) - mtspr XER,r2 - mtcrf 0xFF,r0 - REST_10GPRS(3, r1) - REST_10GPRS(13, r1) - REST_8GPRS(23, r1) - REST_GPR(31, r1) - lwz r2,_NIP(r1) /* Restore environment */ - lwz r0,_MSR(r1) - mtspr SRR0,r2 - mtspr SRR1,r0 - lwz r0,GPR0(r1) - lwz r2,GPR2(r1) - lwz r1,GPR1(r1) - SYNC - rfi - -/* - * This code initialises the machine, it expects original MSR contents to be in r5. - */ -cpu_early_init: - /* Initialize machine status; enable machine check interrupt */ - /*-----------------------------------------------------------*/ - - li r3, MSR_KERNEL /* Set ME and RI flags */ - rlwimi r3, r5, 0, 25, 25 /* preserve IP bit */ -#ifdef DEBUG - rlwimi r3, r5, 0, 21, 22 /* debugger might set SE, BE bits */ -#endif - mtmsr r3 - SYNC - mtspr SRR1, r3 /* Mirror current MSR state in SRR1 */ - - lis r3, CONFIG_SYS_IMMR@h - -#if defined(CONFIG_WATCHDOG) - /* Initialise the watchdog and reset it */ - /*--------------------------------------*/ - lis r4, CONFIG_SYS_WATCHDOG_VALUE - ori r4, r4, (SWCRR_SWEN | SWCRR_SWRI | SWCRR_SWPR) - stw r4, SWCRR(r3) - - /* reset */ - li r4, 0x556C - sth r4, SWSRR@l(r3) - li r4, 0x0 - ori r4, r4, 0xAA39 - sth r4, SWSRR@l(r3) -#else - /* Disable the watchdog */ - /*----------------------*/ - lwz r4, SWCRR(r3) - /* - * Check to see if it's enabled for disabling: once disabled by s/w - * it's not possible to re-enable it - */ - andi. r4, r4, 0x4 - beq 1f - xor r4, r4, r4 - stw r4, SWCRR(r3) -1: -#endif /* CONFIG_WATCHDOG */ - - /* Initialize the Hardware Implementation-dependent Registers */ - /* HID0 also contains cache control */ - /*------------------------------------------------------*/ - lis r3, CONFIG_SYS_HID0_INIT@h - ori r3, r3, CONFIG_SYS_HID0_INIT@l - SYNC - mtspr HID0, r3 - - lis r3, CONFIG_SYS_HID0_FINAL@h - ori r3, r3, CONFIG_SYS_HID0_FINAL@l - SYNC - mtspr HID0, r3 - - lis r3, CONFIG_SYS_HID2@h - ori r3, r3, CONFIG_SYS_HID2@l - SYNC - mtspr HID2, r3 - sync - blr - - -/* Cache functions. - * - * Note: requires that all cache bits in - * HID0 are in the low half word. - */ - .globl icache_enable -icache_enable: - mfspr r3, HID0 - ori r3, r3, HID0_ICE - lis r4, 0 - ori r4, r4, HID0_ILOCK - andc r3, r3, r4 - ori r4, r3, HID0_ICFI - isync - mtspr HID0, r4 /* sets enable and invalidate, clears lock */ - isync - mtspr HID0, r3 /* clears invalidate */ - blr - - .globl icache_disable -icache_disable: - mfspr r3, HID0 - lis r4, 0 - ori r4, r4, HID0_ICE|HID0_ILOCK - andc r3, r3, r4 - ori r4, r3, HID0_ICFI - isync - mtspr HID0, r4 /* sets invalidate, clears enable and lock*/ - isync - mtspr HID0, r3 /* clears invalidate */ - blr - - .globl icache_status -icache_status: - mfspr r3, HID0 - rlwinm r3, r3, (31 - HID0_ICE_SHIFT + 1), 31, 31 - blr - - .globl dcache_enable -dcache_enable: - mfspr r3, HID0 - li r5, HID0_DCFI|HID0_DLOCK - andc r3, r3, r5 - mtspr HID0, r3 /* no invalidate, unlock */ - ori r3, r3, HID0_DCE - ori r5, r3, HID0_DCFI - mtspr HID0, r5 /* enable + invalidate */ - mtspr HID0, r3 /* enable */ - sync - blr - - .globl dcache_disable -dcache_disable: - mfspr r3, HID0 - lis r4, 0 - ori r4, r4, HID0_DCE|HID0_DLOCK - andc r3, r3, r4 - ori r4, r3, HID0_DCI - sync - mtspr HID0, r4 /* sets invalidate, clears enable and lock */ - sync - mtspr HID0, r3 /* clears invalidate */ - blr - - .globl dcache_status -dcache_status: - mfspr r3, HID0 - rlwinm r3, r3, (31 - HID0_DCE_SHIFT + 1), 31, 31 - blr - - .globl get_pvr -get_pvr: - mfspr r3, PVR - blr - -/*-------------------------------------------------------------------*/ - -/* - * void relocate_code (addr_sp, gd, addr_moni) - * - * This "function" does not return, instead it continues in RAM - * after relocating the monitor code. - * - * r3 = dest - * r4 = src - * r5 = length in bytes - * r6 = cachelinesize - */ - .globl relocate_code -relocate_code: - mr r1, r3 /* Set new stack pointer */ - mr r9, r4 /* Save copy of Global Data pointer */ - mr r10, r5 /* Save copy of Destination Address */ - - GET_GOT - mr r3, r5 /* Destination Address */ - lis r4, CONFIG_SYS_MONITOR_BASE@h /* Source Address */ - ori r4, r4, CONFIG_SYS_MONITOR_BASE@l - lwz r5, GOT(__init_end) - sub r5, r5, r4 - li r6, CONFIG_SYS_CACHELINE_SIZE /* Cache Line Size */ - - /* - * Fix GOT pointer: - * - * New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE) - * + Destination Address - * - * Offset: - */ - sub r15, r10, r4 - - /* First our own GOT */ - add r12, r12, r15 - /* then the one used by the C code */ - add r30, r30, r15 - - /* - * Now relocate code - */ - cmplw cr1,r3,r4 - addi r0,r5,3 - srwi. r0,r0,2 - beq cr1,4f /* In place copy is not necessary */ - beq 7f /* Protect against 0 count */ - mtctr r0 - bge cr1,2f - la r8,-4(r4) - la r7,-4(r3) - - /* copy */ -1: lwzu r0,4(r8) - stwu r0,4(r7) - bdnz 1b - - addi r0,r5,3 - srwi. r0,r0,2 - mtctr r0 - la r8,-4(r4) - la r7,-4(r3) - - /* and compare */ -20: lwzu r20,4(r8) - lwzu r21,4(r7) - xor. r22, r20, r21 - bne 30f - bdnz 20b - b 4f - - /* compare failed */ -30: li r3, 0 - blr - -2: slwi r0,r0,2 /* re copy in reverse order ... y do we needed it? */ - add r8,r4,r0 - add r7,r3,r0 -3: lwzu r0,-4(r8) - stwu r0,-4(r7) - bdnz 3b - -/* - * Now flush the cache: note that we must start from a cache aligned - * address. Otherwise we might miss one cache line. - */ -4: cmpwi r6,0 - add r5,r3,r5 - beq 7f /* Always flush prefetch queue in any case */ - subi r0,r6,1 - andc r3,r3,r0 - mr r4,r3 -5: dcbst 0,r4 - add r4,r4,r6 - cmplw r4,r5 - blt 5b - sync /* Wait for all dcbst to complete on bus */ - mr r4,r3 -6: icbi 0,r4 - add r4,r4,r6 - cmplw r4,r5 - blt 6b -7: sync /* Wait for all icbi to complete on bus */ - isync - -/* - * We are done. Do not return, instead branch to second part of board - * initialization, now running from RAM. - */ - addi r0, r10, in_ram - _start + EXC_OFF_SYS_RESET - mtlr r0 - blr - -in_ram: - /* - * Relocation Function, r12 point to got2+0x8000 - * - * Adjust got2 pointers, no need to check for 0, this code - * already puts a few entries in the table. - */ - li r0,__got2_entries@sectoff@l - la r3,GOT(_GOT2_TABLE_) - lwz r11,GOT(_GOT2_TABLE_) - mtctr r0 - sub r11,r3,r11 - addi r3,r3,-4 -1: lwzu r0,4(r3) - cmpwi r0,0 - beq- 2f - add r0,r0,r11 - stw r0,0(r3) -2: bdnz 1b - - /* - * Now adjust the fixups and the pointers to the fixups - * in case we need to move ourselves again. - */ - li r0,__fixup_entries@sectoff@l - lwz r3,GOT(_FIXUP_TABLE_) - cmpwi r0,0 - mtctr r0 - addi r3,r3,-4 - beq 4f -3: lwzu r4,4(r3) - lwzux r0,r4,r11 - add r0,r0,r11 - stw r10,0(r3) - stw r0,0(r4) - bdnz 3b -4: -clear_bss: - /* - * Now clear BSS segment - */ - lwz r3,GOT(__bss_start) - lwz r4,GOT(_end) - - cmplw 0, r3, r4 - beq 6f - - li r0, 0 -5: - stw r0, 0(r3) - addi r3, r3, 4 - cmplw 0, r3, r4 - bne 5b -6: - mr r3, r9 /* Global Data pointer */ - mr r4, r10 /* Destination Address */ - bl board_init_r - - /* - * Copy exception vector code to low memory - * - * r3: dest_addr - * r7: source address, r8: end address, r9: target address - */ - .globl trap_init -trap_init: - mflr r4 /* save link register */ - GET_GOT - lwz r7, GOT(_start) - lwz r8, GOT(_end_of_vectors) - - li r9, 0x100 /* reset vector at 0x100 */ - - cmplw 0, r7, r8 - bgelr /* return if r7>=r8 - just in case */ -1: - lwz r0, 0(r7) - stw r0, 0(r9) - addi r7, r7, 4 - addi r9, r9, 4 - cmplw 0, r7, r8 - bne 1b - - /* - * relocate `hdlr' and `int_return' entries - */ - li r7, .L_MachineCheck - _start + EXC_OFF_SYS_RESET - li r8, Alignment - _start + EXC_OFF_SYS_RESET -2: - bl trap_reloc - addi r7, r7, 0x100 /* next exception vector */ - cmplw 0, r7, r8 - blt 2b - - li r7, .L_Alignment - _start + EXC_OFF_SYS_RESET - bl trap_reloc - - li r7, .L_ProgramCheck - _start + EXC_OFF_SYS_RESET - bl trap_reloc - - li r7, .L_FPUnavailable - _start + EXC_OFF_SYS_RESET - li r8, SystemCall - _start + EXC_OFF_SYS_RESET -3: - bl trap_reloc - addi r7, r7, 0x100 /* next exception vector */ - cmplw 0, r7, r8 - blt 3b - - li r7, .L_Trace - _start + EXC_OFF_SYS_RESET - li r8, _end_of_vectors - _start + EXC_OFF_SYS_RESET -4: - bl trap_reloc - addi r7, r7, 0x100 /* next exception vector */ - cmplw 0, r7, r8 - blt 4b - - mfmsr r3 /* now that the vectors have */ - lis r7, MSR_IP@h /* relocated into low memory */ - ori r7, r7, MSR_IP@l /* MSR[IP] can be turned off */ - andc r3, r3, r7 /* (if it was on) */ - SYNC /* Some chip revs need this... */ - mtmsr r3 - SYNC - - mtlr r4 /* restore link register */ - blr |