diff options
Diffstat (limited to 'cpu/leon3/usb_uhci.c')
| -rw-r--r-- | cpu/leon3/usb_uhci.c | 1313 |
1 files changed, 0 insertions, 1313 deletions
diff --git a/cpu/leon3/usb_uhci.c b/cpu/leon3/usb_uhci.c deleted file mode 100644 index 8f99e1db194..00000000000 --- a/cpu/leon3/usb_uhci.c +++ /dev/null @@ -1,1313 +0,0 @@ -/* - * Part of this code has been derived from linux: - * Universal Host Controller Interface driver for USB (take II). - * - * (c) 1999-2001 Georg Acher, acher@in.tum.de (executive slave) (base guitar) - * Deti Fliegl, deti@fliegl.de (executive slave) (lead voice) - * Thomas Sailer, sailer@ife.ee.ethz.ch (chief consultant) (cheer leader) - * Roman Weissgaerber, weissg@vienna.at (virt root hub) (studio porter) - * (c) 2000 Yggdrasil Computing, Inc. (port of new PCI interface support - * from usb-ohci.c by Adam Richter, adam@yggdrasil.com). - * (C) 2000 David Brownell, david-b@pacbell.net (usb-ohci.c) - * - * HW-initalization based on material of - * - * (C) Copyright 1999 Linus Torvalds - * (C) Copyright 1999 Johannes Erdfelt - * (C) Copyright 1999 Randy Dunlap - * (C) Copyright 1999 Gregory P. Smith - * - * - * Adapted for U-Boot: - * (C) Copyright 2001 Denis Peter, MPL AG Switzerland - * (C) Copyright 2008, Daniel Hellström, daniel@gaisler.com - * Added AMBA Plug&Play detection of GRUSB, modified interrupt handler. - * Added cache flushes where needed. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - * - */ - -/********************************************************************** - * How it works: - * ------------- - * The framelist / Transfer descriptor / Queue Heads are similar like - * in the linux usb_uhci.c. - * - * During initialization, the following skeleton is allocated in init_skel: - * - * framespecific | common chain - * - * framelist[] - * [ 0 ]-----> TD ---------\ - * [ 1 ]-----> TD ----------> TD ------> QH -------> QH -------> QH ---> NULL - * ... TD ---------/ - * [1023]-----> TD --------/ - * - * ^^ ^^ ^^ ^^ ^^ - * 7 TDs for 1 TD for Start of Start of End Chain - * INT (2-128ms) 1ms-INT CTRL Chain BULK Chain - * - * - * Since this is a bootloader, the isochronous transfer descriptor have been removed. - * - * Interrupt Transfers. - * -------------------- - * For Interupt transfers USB_MAX_TEMP_INT_TD Transfer descriptor are available. They - * will be inserted after the appropriate (depending the interval setting) skeleton TD. - * If an interrupt has been detected the dev->irqhandler is called. The status and number - * of transfered bytes is stored in dev->irq_status resp. dev->irq_act_len. If the - * dev->irqhandler returns 0, the interrupt TD is removed and disabled. If an 1 is returned, - * the interrupt TD will be reactivated. - * - * Control Transfers - * ----------------- - * Control Transfers are issued by filling the tmp_td with the appropriate data and connect - * them to the qh_cntrl queue header. Before other control/bulk transfers can be issued, - * the programm has to wait for completion. This does not allows asynchronous data transfer. - * - * Bulk Transfers - * -------------- - * Bulk Transfers are issued by filling the tmp_td with the appropriate data and connect - * them to the qh_bulk queue header. Before other control/bulk transfers can be issued, - * the programm has to wait for completion. This does not allows asynchronous data transfer. - * - * - */ - -#include <common.h> -#include <ambapp.h> -#include <asm/leon.h> -#include <asm/leon3.h> -#include <asm/processor.h> - -#ifdef CONFIG_USB_UHCI - -#include <usb.h> -#include "usb_uhci.h" - -#define USB_MAX_TEMP_TD 128 /* number of temporary TDs for bulk and control transfers */ -#define USB_MAX_TEMP_INT_TD 32 /* number of temporary TDs for Interrupt transfers */ - -extern int leon3_snooping_avail; -/* -#define out16r(address,data) (*(unsigned short *)(address) = \ - (unsigned short)( \ - (((unsigned short)(data)&0xff)<<8) | \ - (((unsigned short)(data)&0xff00)>>8) \ - )) - */ -#define out16r(address,data) _out16r((unsigned int)(address), (unsigned short)(data)) -void _out16r(unsigned int address, unsigned short data) -{ - unsigned short val = (unsigned short)((((unsigned short)(data) & 0xff) - << 8) | (((unsigned short)(data) - & 0xff00) >> 8)); -#ifdef UHCI_DEBUG_REGS - printf("out16r(0x%lx,0x%04x = 0x%04x)\n", address, val, data); -#endif - *(unsigned short *)(address) = val; -} - -#define out32r(address,data) _out32r((unsigned int)(address), (unsigned int)(data)) -void _out32r(unsigned int address, unsigned int data) -{ - unsigned int val = (unsigned int)((((unsigned int)(data) & 0x000000ff) - << 24) | (((unsigned int)(data) & - 0x0000ff00) << 8) | - (((unsigned int)(data) & 0x00ff0000) - >> 8) | (((unsigned int)(data) & - 0xff000000) >> 24)); -#ifdef UHCI_DEBUG_REGS - printf("out32r(0x%lx,0x%lx = 0x%lx)\n", address, val, data); -#endif - *(unsigned int *)address = val; -} - -#define in16r(address) _in16r((unsigned int)(address)) -unsigned short _in16r(unsigned int address) -{ - unsigned short val = sparc_load_reg_cachemiss_word(address); - val = ((val << 8) & 0xff00) | ((val >> 8) & 0xff); -#ifdef UHCI_DEBUG_REGS - printf("in16r(0x%lx): 0x%04x\n", address, val); -#endif - return val; -} - -#define in32r(address) _in32r((unsigned int)(address)) -unsigned int _in32r(unsigned int address) -{ - unsigned int val = sparc_load_reg_cachemiss(address); - val = - ((val << 24) & 0xff000000) | ((val << 8) & 0xff0000) | ((val >> 8) & - 0xff00) | - ((val >> 24) & 0xff); -#ifdef UHCI_DEBUG_REGS - printf("in32r(0x%lx): 0x%08x\n", address, val); -#endif - return val; -} - -#define READ32(address) sparc_load_reg_cachemiss((unsigned int)(address)) - -/*#define USB_UHCI_DEBUG*/ -#undef USB_UHCI_DEBUG - -void usb_show_td(int max); -#ifdef USB_UHCI_DEBUG -void grusb_show_regs(void); -#define USB_UHCI_PRINTF(fmt,args...) printf (fmt ,##args) -#else -#define USB_UHCI_PRINTF(fmt,args...) -#endif - -static int grusb_irq = -1; /* irq vector, if -1 uhci is stopped / reseted */ -unsigned int usb_base_addr; /* base address */ - -static uhci_td_t td_int[8] __attribute__ ((aligned(16))); /* Interrupt Transfer descriptors */ -static uhci_qh_t qh_cntrl __attribute__ ((aligned(16))); /* control Queue Head */ -static uhci_qh_t qh_bulk __attribute__ ((aligned(16))); /* bulk Queue Head */ -static uhci_qh_t qh_end __attribute__ ((aligned(16))); /* end Queue Head */ -static uhci_td_t td_last __attribute__ ((aligned(16))); /* last TD (linked with end chain) */ - -/* temporary tds */ -static uhci_td_t tmp_td[USB_MAX_TEMP_TD] __attribute__ ((aligned(16))); /* temporary bulk/control td's */ -static uhci_td_t tmp_int_td[USB_MAX_TEMP_INT_TD] __attribute__ ((aligned(16))); /* temporary interrupt td's */ - -static unsigned long framelist[1024] __attribute__ ((aligned(0x1000))); /* frame list */ - -static struct virt_root_hub rh; /* struct for root hub */ - -/********************************************************************** - * some forward decleration - */ -int uhci_submit_rh_msg(struct usb_device *dev, unsigned long pipe, - void *buffer, int transfer_len, - struct devrequest *setup); - -/* fill a td with the approproiate data. Link, status, info and buffer - * are used by the USB controller itselfes, dev is used to identify the - * "connected" device - */ -void usb_fill_td(uhci_td_t * td, unsigned long link, unsigned long status, - unsigned long info, unsigned long buffer, unsigned long dev) -{ - td->link = swap_32(link); - td->status = swap_32(status); - if ((info & UHCI_PID) == 0) - info |= USB_PID_OUT; - td->info = swap_32(info); - td->buffer = swap_32(buffer); - td->dev_ptr = dev; -} - -/* fill a qh with the approproiate data. Head and element are used by the USB controller - * itselfes. As soon as a valid dev_ptr is filled, a td chain is connected to the qh. - * Please note, that after completion of the td chain, the entry element is removed / - * marked invalid by the USB controller. - */ -void usb_fill_qh(uhci_qh_t * qh, unsigned long head, unsigned long element) -{ - qh->head = swap_32(head); - qh->element = swap_32(element); - qh->dev_ptr = 0L; -} - -/* get the status of a td->status - */ -unsigned long usb_uhci_td_stat(unsigned long status) -{ - unsigned long result = 0; - result |= (status & TD_CTRL_NAK) ? USB_ST_NAK_REC : 0; - result |= (status & TD_CTRL_STALLED) ? USB_ST_STALLED : 0; - result |= (status & TD_CTRL_DBUFERR) ? USB_ST_BUF_ERR : 0; - result |= (status & TD_CTRL_BABBLE) ? USB_ST_BABBLE_DET : 0; - result |= (status & TD_CTRL_CRCTIMEO) ? USB_ST_CRC_ERR : 0; - result |= (status & TD_CTRL_BITSTUFF) ? USB_ST_BIT_ERR : 0; - result |= (status & TD_CTRL_ACTIVE) ? USB_ST_NOT_PROC : 0; - return result; -} - -/* get the status and the transfered len of a td chain. - * called from the completion handler - */ -int usb_get_td_status(uhci_td_t * td, struct usb_device *dev) -{ - unsigned long temp, info; - unsigned long stat; - uhci_td_t *mytd = td; - - if (dev->devnum == rh.devnum) - return 0; - dev->act_len = 0; - stat = 0; - do { - temp = swap_32((unsigned long)READ32(&mytd->status)); - stat = usb_uhci_td_stat(temp); - info = swap_32((unsigned long)READ32(&mytd->info)); - if (((info & 0xff) != USB_PID_SETUP) && (((info >> 21) & 0x7ff) != 0x7ff) && (temp & 0x7FF) != 0x7ff) { /* if not setup and not null data pack */ - dev->act_len += (temp & 0x7FF) + 1; /* the transfered len is act_len + 1 */ - } - if (stat) { /* status no ok */ - dev->status = stat; - return -1; - } - temp = swap_32((unsigned long)READ32(&mytd->link)); - mytd = (uhci_td_t *) (temp & 0xfffffff0); - } while ((temp & 0x1) == 0); /* process all TDs */ - dev->status = stat; - return 0; /* Ok */ -} - -/*------------------------------------------------------------------- - * LOW LEVEL STUFF - * assembles QHs und TDs for control, bulk and iso - *-------------------------------------------------------------------*/ -int dummy(void) -{ - USB_UHCI_PRINTF("DUMMY\n"); - return 0; -} - -/* Submits a control message. That is a Setup, Data and Status transfer. - * Routine does not wait for completion. - */ -int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer, - int transfer_len, struct devrequest *setup) -{ - unsigned long destination, status; - int maxsze = usb_maxpacket(dev, pipe); - unsigned long dataptr; - int len; - int pktsze; - int i = 0; - - if (!maxsze) { - USB_UHCI_PRINTF - ("uhci_submit_control_urb: pipesize for pipe %lx is zero\n", - pipe); - return -1; - } - if (((pipe >> 8) & 0x7f) == rh.devnum) { - /* this is the root hub -> redirect it */ - return uhci_submit_rh_msg(dev, pipe, buffer, transfer_len, - setup); - } - USB_UHCI_PRINTF("uhci_submit_control start len %x, maxsize %x\n", - transfer_len, maxsze); - /* The "pipe" thing contains the destination in bits 8--18 */ - destination = (pipe & PIPE_DEVEP_MASK) | USB_PID_SETUP; /* Setup stage */ - /* 3 errors */ - status = (pipe & TD_CTRL_LS) | TD_CTRL_ACTIVE | (3 << 27); - /* (urb->transfer_flags & USB_DISABLE_SPD ? 0 : TD_CTRL_SPD); */ - /* Build the TD for the control request, try forever, 8 bytes of data */ - usb_fill_td(&tmp_td[i], UHCI_PTR_TERM, status, destination | (7 << 21), - (unsigned long)setup, (unsigned long)dev); -#ifdef DEBUG_EXTRA - { - char *sp = (char *)setup; - printf("SETUP to pipe %lx: %x %x %x %x %x %x %x %x\n", pipe, - sp[0], sp[1], sp[2], sp[3], sp[4], sp[5], sp[6], sp[7]); - } -#endif - dataptr = (unsigned long)buffer; - len = transfer_len; - - /* If direction is "send", change the frame from SETUP (0x2D) - to OUT (0xE1). Else change it from SETUP to IN (0x69). */ - destination = - (pipe & PIPE_DEVEP_MASK) | ((pipe & USB_DIR_IN) == - 0 ? USB_PID_OUT : USB_PID_IN); - while (len > 0) { - /* data stage */ - pktsze = len; - i++; - if (pktsze > maxsze) - pktsze = maxsze; - destination ^= 1 << TD_TOKEN_TOGGLE; /* toggle DATA0/1 */ - usb_fill_td(&tmp_td[i], UHCI_PTR_TERM, status, destination | ((pktsze - 1) << 21), dataptr, (unsigned long)dev); /* Status, pktsze bytes of data */ - tmp_td[i - 1].link = swap_32((unsigned long)&tmp_td[i]); - - dataptr += pktsze; - len -= pktsze; - } - - /* Build the final TD for control status */ - /* It's only IN if the pipe is out AND we aren't expecting data */ - - destination &= ~UHCI_PID; - if (((pipe & USB_DIR_IN) == 0) || (transfer_len == 0)) - destination |= USB_PID_IN; - else - destination |= USB_PID_OUT; - destination |= 1 << TD_TOKEN_TOGGLE; /* End in Data1 */ - i++; - status &= ~TD_CTRL_SPD; - /* no limit on errors on final packet , 0 bytes of data */ - usb_fill_td(&tmp_td[i], UHCI_PTR_TERM, status | TD_CTRL_IOC, - destination | (UHCI_NULL_DATA_SIZE << 21), 0, - (unsigned long)dev); - tmp_td[i - 1].link = swap_32((unsigned long)&tmp_td[i]); /* queue status td */ - /* usb_show_td(i+1); */ - USB_UHCI_PRINTF("uhci_submit_control end (%d tmp_tds used)\n", i); - /* first mark the control QH element terminated */ - qh_cntrl.element = 0xffffffffL; - /* set qh active */ - qh_cntrl.dev_ptr = (unsigned long)dev; - /* fill in tmp_td_chain */ - dummy(); - qh_cntrl.element = swap_32((unsigned long)&tmp_td[0]); - return 0; -} - -/*------------------------------------------------------------------- - * Prepare TDs for bulk transfers. - */ -int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer, - int transfer_len) -{ - unsigned long destination, status, info; - unsigned long dataptr; - int maxsze = usb_maxpacket(dev, pipe); - int len; - int i = 0; - - if (transfer_len < 0) { - printf("Negative transfer length in submit_bulk\n"); - return -1; - } - if (!maxsze) - return -1; - /* The "pipe" thing contains the destination in bits 8--18. */ - destination = (pipe & PIPE_DEVEP_MASK) | usb_packetid(pipe); - /* 3 errors */ - status = (pipe & TD_CTRL_LS) | TD_CTRL_ACTIVE | (3 << 27); - /* ((urb->transfer_flags & USB_DISABLE_SPD) ? 0 : TD_CTRL_SPD) | (3 << 27); */ - /* Build the TDs for the bulk request */ - len = transfer_len; - dataptr = (unsigned long)buffer; - do { - int pktsze = len; - if (pktsze > maxsze) - pktsze = maxsze; - /* pktsze bytes of data */ - info = - destination | (((pktsze - 1) & UHCI_NULL_DATA_SIZE) << 21) | - (usb_gettoggle - (dev, usb_pipeendpoint(pipe), - usb_pipeout(pipe)) << TD_TOKEN_TOGGLE); - - if ((len - pktsze) == 0) - status |= TD_CTRL_IOC; /* last one generates INT */ - - usb_fill_td(&tmp_td[i], UHCI_PTR_TERM, status, info, dataptr, (unsigned long)dev); /* Status, pktsze bytes of data */ - if (i > 0) - tmp_td[i - 1].link = swap_32((unsigned long)&tmp_td[i]); - i++; - dataptr += pktsze; - len -= pktsze; - usb_dotoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe)); - } while (len > 0); - /* first mark the bulk QH element terminated */ - qh_bulk.element = 0xffffffffL; - /* set qh active */ - qh_bulk.dev_ptr = (unsigned long)dev; - /* fill in tmp_td_chain */ - qh_bulk.element = swap_32((unsigned long)&tmp_td[0]); - return 0; -} - -/* search a free interrupt td - */ -uhci_td_t *uhci_alloc_int_td(void) -{ - int i; - for (i = 0; i < USB_MAX_TEMP_INT_TD; i++) { - if (tmp_int_td[i].dev_ptr == 0) /* no device assigned -> free TD */ - return &tmp_int_td[i]; - } - return NULL; -} - -/*------------------------------------------------------------------- - * submits USB interrupt (ie. polling ;-) - */ -int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer, - int transfer_len, int interval) -{ - int nint, n; - unsigned long status, destination; - unsigned long info, tmp; - uhci_td_t *mytd; - if (interval < 0 || interval >= 256) - return -1; - - if (interval == 0) - nint = 0; - else { - for (nint = 0, n = 1; nint <= 8; nint++, n += n) { /* round interval down to 2^n */ - if (interval < n) { - interval = n / 2; - break; - } - } - nint--; - } - - USB_UHCI_PRINTF("Rounded interval to %i, chain %i\n", interval, nint); - mytd = uhci_alloc_int_td(); - if (mytd == NULL) { - printf("No free INT TDs found\n"); - return -1; - } - status = (pipe & TD_CTRL_LS) | TD_CTRL_ACTIVE | TD_CTRL_IOC | (3 << 27); -/* (urb->transfer_flags & USB_DISABLE_SPD ? 0 : TD_CTRL_SPD) | (3 << 27); -*/ - - destination = - (pipe & PIPE_DEVEP_MASK) | usb_packetid(pipe) | - (((transfer_len - 1) & 0x7ff) << 21); - - info = - destination | - (usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe)) << - TD_TOKEN_TOGGLE); - tmp = swap_32(td_int[nint].link); - usb_fill_td(mytd, tmp, status, info, (unsigned long)buffer, - (unsigned long)dev); - /* Link it */ - tmp = swap_32((unsigned long)mytd); - td_int[nint].link = tmp; - - usb_dotoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe)); - - return 0; -} - -/********************************************************************** - * Low Level functions - */ - -void reset_hc(void) -{ - - /* Global reset for 100ms */ - out16r(usb_base_addr + USBPORTSC1, 0x0204); - out16r(usb_base_addr + USBPORTSC2, 0x0204); - out16r(usb_base_addr + USBCMD, USBCMD_GRESET | USBCMD_RS); - /* Turn off all interrupts */ - out16r(usb_base_addr + USBINTR, 0); - wait_ms(50); - out16r(usb_base_addr + USBCMD, 0); - wait_ms(10); -} - -void start_hc(void) -{ - int timeout = 1000; - - while (in16r(usb_base_addr + USBCMD) & USBCMD_HCRESET) { - if (!--timeout) { - printf("USBCMD_HCRESET timed out!\n"); - break; - } - } - /* Turn on all interrupts */ - out16r(usb_base_addr + USBINTR, - USBINTR_TIMEOUT | USBINTR_RESUME | USBINTR_IOC | USBINTR_SP); - /* Start at frame 0 */ - out16r(usb_base_addr + USBFRNUM, 0); - /* set Framebuffer base address */ - out32r(usb_base_addr + USBFLBASEADD, (unsigned long)&framelist); - /* Run and mark it configured with a 64-byte max packet */ - out16r(usb_base_addr + USBCMD, USBCMD_RS | USBCMD_CF | USBCMD_MAXP); -} - -/* Initialize the skeleton - */ -void usb_init_skel(void) -{ - unsigned long temp; - int n; - - for (n = 0; n < USB_MAX_TEMP_INT_TD; n++) - tmp_int_td[n].dev_ptr = 0L; /* no devices connected */ - /* last td */ - usb_fill_td(&td_last, UHCI_PTR_TERM, TD_CTRL_IOC, USB_PID_OUT, 0, 0L); - /* usb_fill_td(&td_last,UHCI_PTR_TERM,0,0,0); */ - /* End Queue Header */ - usb_fill_qh(&qh_end, UHCI_PTR_TERM, (unsigned long)&td_last); - /* Bulk Queue Header */ - temp = (unsigned long)&qh_end; - usb_fill_qh(&qh_bulk, temp | UHCI_PTR_QH, UHCI_PTR_TERM); - /* Control Queue Header */ - temp = (unsigned long)&qh_bulk; - usb_fill_qh(&qh_cntrl, temp | UHCI_PTR_QH, UHCI_PTR_TERM); - /* 1ms Interrupt td */ - temp = (unsigned long)&qh_cntrl; - usb_fill_td(&td_int[0], temp | UHCI_PTR_QH, 0, USB_PID_OUT, 0, 0L); - temp = (unsigned long)&td_int[0]; - for (n = 1; n < 8; n++) - usb_fill_td(&td_int[n], temp, 0, USB_PID_OUT, 0, 0L); - for (n = 0; n < 1024; n++) { - /* link all framelist pointers to one of the interrupts */ - int m, o; - if ((n & 127) == 127) - framelist[n] = swap_32((unsigned long)&td_int[0]); - else - for (o = 1, m = 2; m <= 128; o++, m += m) - if ((n & (m - 1)) == ((m - 1) / 2)) - framelist[n] = - swap_32((unsigned long)&td_int[o]); - - } -} - -/* check the common skeleton for completed transfers, and update the status - * of the "connected" device. Called from the IRQ routine. - */ -void usb_check_skel(void) -{ - struct usb_device *dev; - /* start with the control qh */ - if (qh_cntrl.dev_ptr != 0) { /* it's a device assigned check if this caused IRQ */ - dev = (struct usb_device *)qh_cntrl.dev_ptr; - /* Flush cache now that hardware updated DATA and TDs/QHs */ - if (!leon3_snooping_avail) - sparc_dcache_flush_all(); - usb_get_td_status(&tmp_td[0], dev); /* update status */ - if (!(dev->status & USB_ST_NOT_PROC)) { /* is not active anymore, disconnect devices */ - qh_cntrl.dev_ptr = 0; - } - } - /* now process the bulk */ - if (qh_bulk.dev_ptr != 0) { /* it's a device assigned check if this caused IRQ */ - dev = (struct usb_device *)qh_bulk.dev_ptr; - /* Flush cache now that hardware updated DATA and TDs/QHs */ - if (!leon3_snooping_avail) - sparc_dcache_flush_all(); - usb_get_td_status(&tmp_td[0], dev); /* update status */ - if (!(dev->status & USB_ST_NOT_PROC)) { /* is not active anymore, disconnect devices */ - qh_bulk.dev_ptr = 0; - } - } -} - -/* check the interrupt chain, ubdate the status of the appropriate device, - * call the appropriate irqhandler and reactivate the TD if the irqhandler - * returns with 1 - */ -void usb_check_int_chain(void) -{ - int i, res; - unsigned long link, status; - struct usb_device *dev; - uhci_td_t *td, *prevtd; - - for (i = 0; i < 8; i++) { - prevtd = &td_int[i]; /* the first previous td is the skeleton td */ - link = swap_32(READ32(&td_int[i].link)) & 0xfffffff0; /* next in chain */ - td = (uhci_td_t *) link; /* assign it */ - /* all interrupt TDs are finally linked to the td_int[0]. - * so we process all until we find the td_int[0]. - * if int0 chain points to a QH, we're also done - */ - while (((i > 0) && (link != (unsigned long)&td_int[0])) || - ((i == 0) - && !(swap_32(READ32(&td->link)) & UHCI_PTR_QH))) { - /* check if a device is assigned with this td */ - status = swap_32(READ32(&td->status)); - if ((td->dev_ptr != 0L) && !(status & TD_CTRL_ACTIVE)) { - /* td is not active and a device is assigned -> call irqhandler */ - dev = (struct usb_device *)td->dev_ptr; - dev->irq_act_len = ((status & 0x7FF) == 0x7FF) ? 0 : (status & 0x7FF) + 1; /* transfered length */ - dev->irq_status = usb_uhci_td_stat(status); /* get status */ - res = dev->irq_handle(dev); /* call irqhandler */ - if (res == 1) { - /* reactivate */ - status |= TD_CTRL_ACTIVE; - td->status = swap_32(status); - prevtd = td; /* previous td = this td */ - } else { - prevtd->link = READ32(&td->link); /* link previous td directly to the nex td -> unlinked */ - /* remove device pointer */ - td->dev_ptr = 0L; - } - } /* if we call the irq handler */ - link = swap_32(READ32(&td->link)) & 0xfffffff0; /* next in chain */ - td = (uhci_td_t *) link; /* assign it */ - } /* process all td in this int chain */ - } /* next interrupt chain */ -} - -/* usb interrupt service routine. - */ -void handle_usb_interrupt(void) -{ - unsigned short status; - static int error = 0; - - /* - * Read the interrupt status, and write it back to clear the - * interrupt cause - */ - - status = in16r(usb_base_addr + USBSTS); - - if (!status) /* shared interrupt, not mine */ - return; - if (status != 1) { - /* remove host controller halted state */ - if ((status & (USBSTS_HCPE | USBSTS_HCH)) == - (USBSTS_HCPE | USBSTS_HCH)) { - /* Stop due to bug in driver, or hardware */ - out16r(usb_base_addr + USBSTS, status); - out16r(usb_base_addr + USBCMD, - USBCMD_HCRESET | USBCMD_GRESET); - printf - ("GRUSB: HW detected error(s) in USB Descriptors (STS: 0x%x)\n", - status); - usb_show_td(8); - return; - } else if ((status & 0x20) - && ((in16r(usb_base_addr + USBCMD) & USBCMD_RS) == - 0)) { - if (error < 10) { - out16r(usb_base_addr + USBCMD, - USBCMD_RS | in16r(usb_base_addr + - USBCMD)); - error++; - } - } else - error = 0; - } - usb_check_int_chain(); /* call interrupt handlers for int tds */ - usb_check_skel(); /* call completion handler for common transfer routines */ - out16r(usb_base_addr + USBSTS, status); -} - -/* init uhci - */ -int usb_lowlevel_init(void) -{ - unsigned char temp; - ambapp_ahbdev ahbdev; - - /* Find GRUSB core using AMBA Plug&Play information */ - if (ambapp_ahbslv_first(VENDOR_GAISLER, GAISLER_UHCI, &ahbdev) != 1) { - printf("USB UHCI: Failed to find GRUSB controller\n"); - return -1; - } - usb_base_addr = ahbdev.address[0]; - grusb_irq = ahbdev.irq; - /* - usb_base_addr = 0xfffa0000; - grusb_irq = 10; - */ -#ifdef USB_UHCI_DEBUG - grusb_show_regs(); -#endif - memset(td_int, 0, sizeof(td_int)); - memset(tmp_td, 0, sizeof(tmp_td)); - memset(tmp_int_td, 0, sizeof(tmp_int_td)); - memset(&qh_cntrl, 0, sizeof(qh_cntrl)); - memset(&qh_end, 0, sizeof(qh_end)); - memset(&td_last, 0, sizeof(td_last)); - - irq_free_handler(grusb_irq); - USB_UHCI_PRINTF("GRUSB: at 0x%lx irq %d\n", usb_base_addr, grusb_irq); - rh.devnum = 0; - usb_init_skel(); - reset_hc(); - start_hc(); - irq_install_handler(grusb_irq, - (interrupt_handler_t *) handle_usb_interrupt, NULL); - return 0; -} - -/* stop uhci - */ -int usb_lowlevel_stop(void) -{ - if (grusb_irq == -1) - return 1; - irq_free_handler(grusb_irq); - reset_hc(); - grusb_irq = -1; - return 0; -} - -/******************************************************************************************* - * Virtual Root Hub - * Since the uhci does not have a real HUB, we simulate one ;-) - */ -#undef USB_RH_DEBUG - -#ifdef USB_RH_DEBUG -#define USB_RH_PRINTF(fmt,args...) printf (fmt ,##args) -static void usb_display_wValue(unsigned short wValue, unsigned short wIndex); -static void usb_display_Req(unsigned short req); -#else -#define USB_RH_PRINTF(fmt,args...) -static void usb_display_wValue(unsigned short wValue, unsigned short wIndex) -{ -} -static void usb_display_Req(unsigned short req) -{ -} -#endif - -static unsigned char root_hub_dev_des[] = { - 0x12, /* __u8 bLength; */ - 0x01, /* __u8 bDescriptorType; Device */ - 0x00, /* __u16 bcdUSB; v1.0 */ - 0x01, - 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */ - 0x00, /* __u8 bDeviceSubClass; */ - 0x00, /* __u8 bDeviceProtocol; */ - 0x08, /* __u8 bMaxPacketSize0; 8 Bytes */ - 0x00, /* __u16 idVendor; */ - 0x00, - 0x00, /* __u16 idProduct; */ - 0x00, - 0x00, /* __u16 bcdDevice; */ - 0x00, - 0x01, /* __u8 iManufacturer; */ - 0x00, /* __u8 iProduct; */ - 0x00, /* __u8 iSerialNumber; */ - 0x01 /* __u8 bNumConfigurations; */ -}; - -/* Configuration descriptor */ -static unsigned char root_hub_config_des[] = { - 0x09, /* __u8 bLength; */ - 0x02, /* __u8 bDescriptorType; Configuration */ - 0x19, /* __u16 wTotalLength; */ - 0x00, - 0x01, /* __u8 bNumInterfaces; */ - 0x01, /* __u8 bConfigurationValue; */ - 0x00, /* __u8 iConfiguration; */ - 0x40, /* __u8 bmAttributes; - Bit 7: Bus-powered, 6: Self-powered, 5 Remote-wakwup, 4..0: resvd */ - 0x00, /* __u8 MaxPower; */ - - /* interface */ - 0x09, /* __u8 if_bLength; */ - 0x04, /* __u8 if_bDescriptorType; Interface */ - 0x00, /* __u8 if_bInterfaceNumber; */ - 0x00, /* __u8 if_bAlternateSetting; */ - 0x01, /* __u8 if_bNumEndpoints; */ - 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */ - 0x00, /* __u8 if_bInterfaceSubClass; */ - 0x00, /* __u8 if_bInterfaceProtocol; */ - 0x00, /* __u8 if_iInterface; */ - - /* endpoint */ - 0x07, /* __u8 ep_bLength; */ - 0x05, /* __u8 ep_bDescriptorType; Endpoint */ - 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */ - 0x03, /* __u8 ep_bmAttributes; Interrupt */ - 0x08, /* __u16 ep_wMaxPacketSize; 8 Bytes */ - 0x00, - 0xff /* __u8 ep_bInterval; 255 ms */ -}; - -static unsigned char root_hub_hub_des[] = { - 0x09, /* __u8 bLength; */ - 0x29, /* __u8 bDescriptorType; Hub-descriptor */ - 0x02, /* __u8 bNbrPorts; */ - 0x00, /* __u16 wHubCharacteristics; */ - 0x00, - 0x01, /* __u8 bPwrOn2pwrGood; 2ms */ - 0x00, /* __u8 bHubContrCurrent; 0 mA */ - 0x00, /* __u8 DeviceRemovable; *** 7 Ports max *** */ - 0xff /* __u8 PortPwrCtrlMask; *** 7 ports max *** */ -}; - -static unsigned char root_hub_str_index0[] = { - 0x04, /* __u8 bLength; */ - 0x03, /* __u8 bDescriptorType; String-descriptor */ - 0x09, /* __u8 lang ID */ - 0x04, /* __u8 lang ID */ -}; - -static unsigned char root_hub_str_index1[] = { - 28, /* __u8 bLength; */ - 0x03, /* __u8 bDescriptorType; String-descriptor */ - 'U', /* __u8 Unicode */ - 0, /* __u8 Unicode */ - 'H', /* __u8 Unicode */ - 0, /* __u8 Unicode */ - 'C', /* __u8 Unicode */ - 0, /* __u8 Unicode */ - 'I', /* __u8 Unicode */ - 0, /* __u8 Unicode */ - ' ', /* __u8 Unicode */ - 0, /* __u8 Unicode */ - 'R', /* __u8 Unicode */ - 0, /* __u8 Unicode */ - 'o', /* __u8 Unicode */ - 0, /* __u8 Unicode */ - 'o', /* __u8 Unicode */ - 0, /* __u8 Unicode */ - 't', /* __u8 Unicode */ - 0, /* __u8 Unicode */ - ' ', /* __u8 Unicode */ - 0, /* __u8 Unicode */ - 'H', /* __u8 Unicode */ - 0, /* __u8 Unicode */ - 'u', /* __u8 Unicode */ - 0, /* __u8 Unicode */ - 'b', /* __u8 Unicode */ - 0, /* __u8 Unicode */ -}; - -/* - * Root Hub Control Pipe (interrupt Pipes are not supported) - */ - -int uhci_submit_rh_msg(struct usb_device *dev, unsigned long pipe, void *buffer, - int transfer_len, struct devrequest *cmd) -{ - void *data = buffer; - int leni = transfer_len; - int len = 0; - int status = 0; - int stat = 0; - int i; - - unsigned short cstatus; - - unsigned short bmRType_bReq; - unsigned short wValue; - unsigned short wIndex; - unsigned short wLength; - - if (usb_pipeint(pipe)) { - printf("Root-Hub submit IRQ: NOT implemented\n"); - return 0; - } - bmRType_bReq = cmd->requesttype | cmd->request << 8; - wValue = swap_16(cmd->value); - wIndex = swap_16(cmd->index); - wLength = swap_16(cmd->length); - usb_display_Req(bmRType_bReq); - for (i = 0; i < 8; i++) - rh.c_p_r[i] = 0; - USB_RH_PRINTF("Root-Hub: adr: %2x cmd(%1x): %02x%02x %04x %04x %04x\n", - dev->devnum, 8, cmd->requesttype, cmd->request, wValue, - wIndex, wLength); - - switch (bmRType_bReq) { - /* Request Destination: - without flags: Device, - RH_INTERFACE: interface, - RH_ENDPOINT: endpoint, - RH_CLASS means HUB here, - RH_OTHER | RH_CLASS almost ever means HUB_PORT here - */ - - case RH_GET_STATUS: - *(unsigned short *)data = swap_16(1); - len = 2; - break; - case RH_GET_STATUS | RH_INTERFACE: - *(unsigned short *)data = swap_16(0); - len = 2; - break; - case RH_GET_STATUS | RH_ENDPOINT: - *(unsigned short *)data = swap_16(0); - len = 2; - break; - case RH_GET_STATUS | RH_CLASS: - *(unsigned long *)data = swap_32(0); - len = 4; - break; /* hub power ** */ - case RH_GET_STATUS | RH_OTHER | RH_CLASS: - - status = in16r(usb_base_addr + USBPORTSC1 + 2 * (wIndex - 1)); - cstatus = ((status & USBPORTSC_CSC) >> (1 - 0)) | - ((status & USBPORTSC_PEC) >> (3 - 1)) | - (rh.c_p_r[wIndex - 1] << (0 + 4)); - status = (status & USBPORTSC_CCS) | ((status & USBPORTSC_PE) >> (2 - 1)) | ((status & USBPORTSC_SUSP) >> (12 - 2)) | ((status & USBPORTSC_PR) >> (9 - 4)) | (1 << 8) | /* power on ** */ - ((status & USBPORTSC_LSDA) << (-8 + 9)); - - *(unsigned short *)data = swap_16(status); - *(unsigned short *)(data + 2) = swap_16(cstatus); - len = 4; - break; - case RH_CLEAR_FEATURE | RH_ENDPOINT: - switch (wValue) { - case (RH_ENDPOINT_STALL): - len = 0; - break; - } - break; - - case RH_CLEAR_FEATURE | RH_CLASS: - switch (wValue) { - case (RH_C_HUB_OVER_CURRENT): - len = 0; /* hub power over current ** */ - break; - } - break; - - case RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS: - usb_display_wValue(wValue, wIndex); - switch (wValue) { - case (RH_PORT_ENABLE): - status = - in16r(usb_base_addr + USBPORTSC1 + - 2 * (wIndex - 1)); - status = (status & 0xfff5) & ~USBPORTSC_PE; - out16r(usb_base_addr + USBPORTSC1 + 2 * (wIndex - 1), - status); - len = 0; - break; - case (RH_PORT_SUSPEND): - status = - in16r(usb_base_addr + USBPORTSC1 + - 2 * (wIndex - 1)); - status = (status & 0xfff5) & ~USBPORTSC_SUSP; - out16r(usb_base_addr + USBPORTSC1 + 2 * (wIndex - 1), - status); - len = 0; - break; - case (RH_PORT_POWER): - len = 0; /* port power ** */ - break; - case (RH_C_PORT_CONNECTION): - status = - in16r(usb_base_addr + USBPORTSC1 + - 2 * (wIndex - 1)); - status = (status & 0xfff5) | USBPORTSC_CSC; - out16r(usb_base_addr + USBPORTSC1 + 2 * (wIndex - 1), - status); - len = 0; - break; - case (RH_C_PORT_ENABLE): - status = - in16r(usb_base_addr + USBPORTSC1 + - 2 * (wIndex - 1)); - status = (status & 0xfff5) | USBPORTSC_PEC; - out16r(usb_base_addr + USBPORTSC1 + 2 * (wIndex - 1), - status); - len = 0; - break; - case (RH_C_PORT_SUSPEND): -/*** WR_RH_PORTSTAT(RH_PS_PSSC); */ - len = 0; - break; - case (RH_C_PORT_OVER_CURRENT): - len = 0; - break; - case (RH_C_PORT_RESET): - rh.c_p_r[wIndex - 1] = 0; - len = 0; - break; - } - break; - case RH_SET_FEATURE | RH_OTHER | RH_CLASS: - usb_display_wValue(wValue, wIndex); - switch (wValue) { - case (RH_PORT_SUSPEND): - status = - in16r(usb_base_addr + USBPORTSC1 + - 2 * (wIndex - 1)); - status = (status & 0xfff5) | USBPORTSC_SUSP; - out16r(usb_base_addr + USBPORTSC1 + 2 * (wIndex - 1), - status); - len = 0; - break; - case (RH_PORT_RESET): - status = - in16r(usb_base_addr + USBPORTSC1 + - 2 * (wIndex - 1)); - status = (status & 0xfff5) | USBPORTSC_PR; - out16r(usb_base_addr + USBPORTSC1 + 2 * (wIndex - 1), - status); - wait_ms(10); - status = (status & 0xfff5) & ~USBPORTSC_PR; - out16r(usb_base_addr + USBPORTSC1 + 2 * (wIndex - 1), - status); - udelay(10); - status = (status & 0xfff5) | USBPORTSC_PE; - out16r(usb_base_addr + USBPORTSC1 + 2 * (wIndex - 1), - status); - wait_ms(10); - status = (status & 0xfff5) | 0xa; - out16r(usb_base_addr + USBPORTSC1 + 2 * (wIndex - 1), - status); - len = 0; - break; - case (RH_PORT_POWER): - len = 0; /* port power ** */ - break; - case (RH_PORT_ENABLE): - status = - in16r(usb_base_addr + USBPORTSC1 + - 2 * (wIndex - 1)); - status = (status & 0xfff5) | USBPORTSC_PE; - out16r(usb_base_addr + USBPORTSC1 + 2 * (wIndex - 1), - status); - len = 0; - break; - } - break; - - case RH_SET_ADDRESS: - rh.devnum = wValue; - len = 0; - break; - case RH_GET_DESCRIPTOR: - switch ((wValue & 0xff00) >> 8) { - case (0x01): /* device descriptor */ - i = sizeof(root_hub_config_des); - status = i > wLength ? wLength : i; - len = leni > status ? status : leni; - memcpy(data, root_hub_dev_des, len); - break; - case (0x02): /* configuration descriptor */ - i = sizeof(root_hub_config_des); - status = i > wLength ? wLength : i; - len = leni > status ? status : leni; - memcpy(data, root_hub_config_des, len); - break; - case (0x03): /*string descriptors */ - if (wValue == 0x0300) { - i = sizeof(root_hub_str_index0); - status = i > wLength ? wLength : i; - len = leni > status ? status : leni; - memcpy(data, root_hub_str_index0, len); - break; - } - if (wValue == 0x0301) { - i = sizeof(root_hub_str_index1); - status = i > wLength ? wLength : i; - len = leni > status ? status : leni; - memcpy(data, root_hub_str_index1, len); - break; - } - stat = USB_ST_STALLED; - } - break; - - case RH_GET_DESCRIPTOR | RH_CLASS: - root_hub_hub_des[2] = 2; - i = sizeof(root_hub_hub_des); - status = i > wLength ? wLength : i; - len = leni > status ? status : leni; - memcpy(data, root_hub_hub_des, len); - break; - case RH_GET_CONFIGURATION: - *(unsigned char *)data = 0x01; - len = 1; - break; - case RH_SET_CONFIGURATION: - len = 0; - break; - default: - stat = USB_ST_STALLED; - } - USB_RH_PRINTF("Root-Hub stat %lx port1: %x port2: %x\n\n", stat, - in16r(usb_base_addr + USBPORTSC1), - in16r(usb_base_addr + USBPORTSC2)); - dev->act_len = len; - dev->status = stat; - return stat; - -} - -/******************************************************************************** - * Some Debug Routines - */ - -#ifdef USB_RH_DEBUG - -static void usb_display_Req(unsigned short req) -{ - USB_RH_PRINTF("- Root-Hub Request: "); - switch (req) { - case RH_GET_STATUS: - USB_RH_PRINTF("Get Status "); - break; - case RH_GET_STATUS | RH_INTERFACE: - USB_RH_PRINTF("Get Status Interface "); - break; - case RH_GET_STATUS | RH_ENDPOINT: - USB_RH_PRINTF("Get Status Endpoint "); - break; - case RH_GET_STATUS | RH_CLASS: - USB_RH_PRINTF("Get Status Class"); - break; /* hub power ** */ - case RH_GET_STATUS | RH_OTHER | RH_CLASS: - USB_RH_PRINTF("Get Status Class Others"); - break; - case RH_CLEAR_FEATURE | RH_ENDPOINT: - USB_RH_PRINTF("Clear Feature Endpoint "); - break; - case RH_CLEAR_FEATURE | RH_CLASS: - USB_RH_PRINTF("Clear Feature Class "); - break; - case RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS: - USB_RH_PRINTF("Clear Feature Other Class "); - break; - case RH_SET_FEATURE | RH_OTHER | RH_CLASS: - USB_RH_PRINTF("Set Feature Other Class "); - break; - case RH_SET_ADDRESS: - USB_RH_PRINTF("Set Address "); - break; - case RH_GET_DESCRIPTOR: - USB_RH_PRINTF("Get Descriptor "); - break; - case RH_GET_DESCRIPTOR | RH_CLASS: - USB_RH_PRINTF("Get Descriptor Class "); - break; - case RH_GET_CONFIGURATION: - USB_RH_PRINTF("Get Configuration "); - break; - case RH_SET_CONFIGURATION: - USB_RH_PRINTF("Get Configuration "); - break; - default: - USB_RH_PRINTF("****UNKNOWN**** 0x%04X ", req); - } - USB_RH_PRINTF("\n"); - -} - -static void usb_display_wValue(unsigned short wValue, unsigned short wIndex) -{ - switch (wValue) { - case (RH_PORT_ENABLE): - USB_RH_PRINTF("Root-Hub: Enable Port %d\n", wIndex); - break; - case (RH_PORT_SUSPEND): - USB_RH_PRINTF("Root-Hub: Suspend Port %d\n", wIndex); - break; - case (RH_PORT_POWER): - USB_RH_PRINTF("Root-Hub: Port Power %d\n", wIndex); - break; - case (RH_C_PORT_CONNECTION): - USB_RH_PRINTF("Root-Hub: C Port Connection Port %d\n", wIndex); - break; - case (RH_C_PORT_ENABLE): - USB_RH_PRINTF("Root-Hub: C Port Enable Port %d\n", wIndex); - break; - case (RH_C_PORT_SUSPEND): - USB_RH_PRINTF("Root-Hub: C Port Suspend Port %d\n", wIndex); - break; - case (RH_C_PORT_OVER_CURRENT): - USB_RH_PRINTF("Root-Hub: C Port Over Current Port %d\n", - wIndex); - break; - case (RH_C_PORT_RESET): - USB_RH_PRINTF("Root-Hub: C Port reset Port %d\n", wIndex); - break; - default: - USB_RH_PRINTF("Root-Hub: unknown %x %x\n", wValue, wIndex); - break; - } -} - -#endif - -/*#ifdef USB_UHCI_DEBUG*/ - -static int usb_display_td(uhci_td_t * td) -{ - unsigned long tmp; - int valid; - - printf("TD at %p:\n", td); - - tmp = swap_32(READ32(&td->link)); - printf("Link points to 0x%08lX, %s first, %s, %s\n", tmp & 0xfffffff0, - ((tmp & 0x4) == 0x4) ? "Depth" : "Breath", - ((tmp & 0x2) == 0x2) ? "QH" : "TD", - ((tmp & 0x1) == 0x1) ? "invalid" : "valid"); - valid = ((tmp & 0x1) == 0x0); - tmp = swap_32(READ32(&td->status)); - printf - (" %s %ld Errors %s %s %s \n %s %s %s %s %s %s\n Len 0x%lX\n", - (((tmp >> 29) & 0x1) == 0x1) ? "SPD Enable" : "SPD Disable", - ((tmp >> 28) & 0x3), - (((tmp >> 26) & 0x1) == 0x1) ? "Low Speed" : "Full Speed", - (((tmp >> 25) & 0x1) == 0x1) ? "ISO " : "", - (((tmp >> 24) & 0x1) == 0x1) ? "IOC " : "", - (((tmp >> 23) & 0x1) == 0x1) ? "Active " : "Inactive ", - (((tmp >> 22) & 0x1) == 0x1) ? "Stalled" : "", - (((tmp >> 21) & 0x1) == 0x1) ? "Data Buffer Error" : "", - (((tmp >> 20) & 0x1) == 0x1) ? "Babble" : "", - (((tmp >> 19) & 0x1) == 0x1) ? "NAK" : "", - (((tmp >> 18) & 0x1) == 0x1) ? "Bitstuff Error" : "", - (tmp & 0x7ff)); - tmp = swap_32(READ32(&td->info)); - printf(" MaxLen 0x%lX\n", ((tmp >> 21) & 0x7FF)); - printf(" %sEndpoint 0x%lX Dev Addr 0x%lX PID 0x%lX\n", - ((tmp >> 19) & 0x1) == 0x1 ? "TOGGLE " : "", ((tmp >> 15) & 0xF), - ((tmp >> 8) & 0x7F), tmp & 0xFF); - tmp = swap_32(READ32(&td->buffer)); - printf(" Buffer 0x%08lX\n", tmp); - printf(" DEV %08lX\n", td->dev_ptr); - return valid; -} - -void usb_show_td(int max) -{ - int i; - if (max > 0) { - for (i = 0; i < max; i++) { - usb_display_td(&tmp_td[i]); - } - } else { - i = 0; - do { - printf("tmp_td[%d]\n", i); - } while (usb_display_td(&tmp_td[i++])); - } -} - -void grusb_show_regs(void) -{ - unsigned int tmp; - - tmp = in16r(usb_base_addr + USBCMD); - printf(" USBCMD: 0x%04x\n", tmp); - tmp = in16r(usb_base_addr + USBSTS); - printf(" USBSTS: 0x%04x\n", tmp); - tmp = in16r(usb_base_addr + USBINTR); - printf(" USBINTR: 0x%04x\n", tmp); - tmp = in16r(usb_base_addr + USBFRNUM); - printf(" FRNUM: 0x%04x\n", tmp); - tmp = in32r(usb_base_addr + USBFLBASEADD); - printf(" FLBASEADD: 0x%08x\n", tmp); - tmp = in16r(usb_base_addr + USBSOF); - printf(" SOFMOD: 0x%04x\n", tmp); - tmp = in16r(usb_base_addr + USBPORTSC1); - printf(" PORTSC1: 0x%04x\n", tmp); -} - -/*#endif*/ -#endif /* CONFIG_USB_UHCI */ - -/* EOF */ |