summaryrefslogtreecommitdiff
path: root/cpu/ixp/npe/include/IxTimeSyncAcc.h
diff options
context:
space:
mode:
Diffstat (limited to 'cpu/ixp/npe/include/IxTimeSyncAcc.h')
-rw-r--r--cpu/ixp/npe/include/IxTimeSyncAcc.h783
1 files changed, 0 insertions, 783 deletions
diff --git a/cpu/ixp/npe/include/IxTimeSyncAcc.h b/cpu/ixp/npe/include/IxTimeSyncAcc.h
deleted file mode 100644
index 25effed90b..0000000000
--- a/cpu/ixp/npe/include/IxTimeSyncAcc.h
+++ /dev/null
@@ -1,783 +0,0 @@
-/**
- * @file IxTimeSyncAcc.h
- *
- * @author Intel Corporation
- * @date 07 May 2004
- *
- * @brief Header file for IXP400 Access Layer to IEEE 1588(TM) Precision
- * Clock Synchronisation Protocol Hardware Assist
- *
- * @version 1
- *
- * @par
- * IXP400 SW Release version 2.0
- *
- * -- Copyright Notice --
- *
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- *
- * @par
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. Neither the name of the Intel Corporation nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * @par
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS''
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * @par
- * -- End of Copyright Notice --
- */
-
-/**
- * @defgroup IxTimeSyncAcc IXP400 Time Sync Access Component API
- *
- * @brief Public API for IxTimeSyncAcc
- *
- * @{
- */
-#ifndef IXTIMESYNCACC_H
-#define IXTIMESYNCACC_H
-
-#ifdef __ixp46X
-
-#include "IxOsal.h"
-
-/**
- * Section for enum
- */
-
-/**
- * @ingroup IxTimeSyncAcc
- *
- * @enum IxTimeSyncAccStatus
- *
- * @brief The status as returned from the API
- */
-typedef enum /**< IxTimeSyncAccStatus */
-{
- IX_TIMESYNCACC_SUCCESS = IX_SUCCESS, /**< Requested operation successful */
- IX_TIMESYNCACC_INVALIDPARAM, /**< An invalid parameter was passed */
- IX_TIMESYNCACC_NOTIMESTAMP, /**< While polling no time stamp available */
- IX_TIMESYNCACC_INTERRUPTMODEINUSE, /**< Polling not allowed while operating in interrupt mode */
- IX_TIMESYNCACC_FAILED /**< Internal error occurred */
-}IxTimeSyncAccStatus;
-
-/**
- * @ingroup IxTimeSyncAcc
- *
- * @enum IxTimeSyncAccAuxMode
- *
- * @brief Master or Slave Auxiliary Time Stamp (Snap Shot)
- */
-typedef enum /**< IxTimeSyncAccAuxMode */
-{
- IX_TIMESYNCACC_AUXMODE_MASTER, /**< Auxiliary Master Mode */
- IX_TIMESYNCACC_AUXMODE_SLAVE, /**< Auxiliary Slave Mode */
- IX_TIMESYNCACC_AUXMODE_INVALID /**< Invalid Auxiliary Mode */
-}IxTimeSyncAccAuxMode;
-
-/**
- * @ingroup IxTimeSyncAcc
- *
- * @enum IxTimeSyncAcc1588PTPPort
- *
- * @brief IEEE 1588 PTP Communication Port(Channel)
- */
-typedef enum /**< IxTimeSyncAcc1588PTPPort */
-{
- IX_TIMESYNCACC_NPE_A_1588PTP_PORT, /**< PTP Communication Port on NPE-A */
- IX_TIMESYNCACC_NPE_B_1588PTP_PORT, /**< PTP Communication Port on NPE-B */
- IX_TIMESYNCACC_NPE_C_1588PTP_PORT, /**< PTP Communication Port on NPE-C */
- IX_TIMESYNCACC_NPE_1588PORT_INVALID /**< Invalid PTP Communication Port */
-} IxTimeSyncAcc1588PTPPort;
-
-/**
- * @ingroup IxTimeSyncAcc
- *
- * @enum IxTimeSyncAcc1588PTPPortMode
- *
- * @brief Master or Slave mode for IEEE 1588 PTP Communication Port
- */
-typedef enum /**< IxTimeSyncAcc1588PTPPortMode */
-{
- IX_TIMESYNCACC_1588PTP_PORT_MASTER, /**< PTP Communication Port in Master Mode */
- IX_TIMESYNCACC_1588PTP_PORT_SLAVE, /**< PTP Communication Port in Slave Mode */
- IX_TIMESYNCACC_1588PTP_PORT_ANYMODE, /**< PTP Communication Port in ANY Mode
- allows time stamping of all messages
- including non-1588 PTP */
- IX_TIMESYNCACC_1588PTP_PORT_MODE_INVALID /**< Invalid PTP Port Mode */
-}IxTimeSyncAcc1588PTPPortMode;
-
-/**
- * @ingroup IxTimeSyncAcc
- *
- * @enum IxTimeSyncAcc1588PTPMsgType
- *
- * @brief 1588 PTP Messages types that can be detected on communication port
- *
- * Note that client code can determine this based on master/slave mode in which
- * it is already operating in and this information is made available for the sake
- * of convenience only.
- */
-typedef enum /**< IxTimeSyncAcc1588PTPMsgType */
-{
- IX_TIMESYNCACC_1588PTP_MSGTYPE_SYNC, /**< PTP Sync message sent by Master or received by Slave */
- IX_TIMESYNCACC_1588PTP_MSGTYPE_DELAYREQ, /**< PTP Delay_Req message sent by Slave or received by Master */
- IX_TIMESYNCACC_1588PTP_MSGTYPE_UNKNOWN /**< Other PTP and non-PTP message sent or received by both
- Master and/or Slave */
-} IxTimeSyncAcc1588PTPMsgType;
-
-/**
- * Section for struct
- */
-
-/**
- * @ingroup IxTimeSyncAcc
- *
- * @struct IxTimeSyncAccTimeValue
- *
- * @brief Struct to hold 64 bit SystemTime and TimeStamp values
- */
-typedef struct /**< IxTimeSyncAccTimeValue */
-{
- UINT32 timeValueLowWord; /**< Lower 32 bits of the time value */
- UINT32 timeValueHighWord; /**< Upper 32 bits of the time value */
-} IxTimeSyncAccTimeValue;
-
-/**
- * @ingroup IxTimeSyncAcc
- *
- * @struct IxTimeSyncAccUuid
- *
- * @brief Struct to hold 48 bit UUID values captured in Sync or Delay_Req messages
- */
-typedef struct /**< IxTimeSyncAccUuid */
-{
- UINT32 uuidValueLowWord; /**<The lower 32 bits of the UUID */
- UINT16 uuidValueHighHalfword; /**<The upper 16 bits of the UUID */
-} IxTimeSyncAccUuid;
-
-/**
- * @ingroup IxTimeSyncAcc
- *
- * @struct IxTimeSyncAccPtpMsgData
- *
- * @brief Struct for data from the PTP message returned when TimeStamp available
- */
-typedef struct /**< IxTimeSyncAccPtpMsgData */
-{
- IxTimeSyncAcc1588PTPMsgType ptpMsgType; /**< PTP Messages type */
- IxTimeSyncAccTimeValue ptpTimeStamp; /**< 64 bit TimeStamp value from PTP Message */
- IxTimeSyncAccUuid ptpUuid; /**< 48 bit UUID value from the PTP Message */
- UINT16 ptpSequenceNumber; /**< 16 bit Sequence Number from PTP Message */
-} IxTimeSyncAccPtpMsgData;
-
-/**
- * @ingroup IxTimeSyncAcc
- *
- * @struct IxTimeSyncAccStats
- *
- * @brief Statistics for the PTP messages
- */
-typedef struct /**< IxTimeSyncAccStats */
-{
- UINT32 rxMsgs; /**< Count of timestamps for received PTP Messages */
- UINT32 txMsgs; /**< Count of timestamps for transmitted PTP Messages */
-} IxTimeSyncAccStats;
-
-/**
- * @ingroup IxTimeSyncAcc
- *
- * @typedef IxTimeSyncAccTargetTimeCallback
- *
- * @brief Callback for use by target time stamp interrupt
- */
-typedef void (*IxTimeSyncAccTargetTimeCallback)(IxTimeSyncAccTimeValue targetTime);
-
-/**
- * @ingroup IxTimeSyncAcc
- *
- * @typedef IxTimeSyncAccAuxTimeCallback
- *
- * @brief Callback for use by auxiliary time interrupts
- */
-typedef void (*IxTimeSyncAccAuxTimeCallback)(IxTimeSyncAccAuxMode auxMode,
- IxTimeSyncAccTimeValue auxTime);
-
-/*
- * Section for prototypes interface functions
- */
-
-/**
- * @ingroup IxTimeSyncAcc
- *
- * @fn IxTimeSyncAccStatus ixTimeSyncAccPTPPortConfigSet(
- IxTimeSyncAcc1588PTPPort ptpPort,
- IxTimeSyncAcc1588PTPPortMode ptpPortMode)
- *
- * @brief Configures the IEEE 1588 message detect on particular PTP port.
- *
- * @param ptpPort [in] - PTP port to config
- * @param ptpPortMode [in]- Port to operate in Master or Slave mode
- *
- * This API will enable the time stamping on a particular PTP port.
- *
- * @li Re-entrant : No
- * @li ISR Callable : No
- *
- * @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful
- * @li IX_TIMESYNCACC_INVALIDPARAM - Invalid parameters passed
- * @li IX_TIMESYNCACC_FAILED - Internal error occurred
- */
-PUBLIC IxTimeSyncAccStatus
-ixTimeSyncAccPTPPortConfigSet(IxTimeSyncAcc1588PTPPort ptpPort,
- IxTimeSyncAcc1588PTPPortMode ptpPortMode);
-
-/**
- * @ingroup IxTimeSyncAcc
- *
- * @fn IxTimeSyncAccStatus ixTimeSyncAccPTPPortConfigGet(
- IxTimeSyncAcc1588PTPPort ptpPort,
- IxTimeSyncAcc1588PTPPortMode *ptpPortMode)
- *
- * @brief Retrieves IEEE 1588 PTP operation mode on particular PTP port.
- *
- * @param ptpPort [in] - PTP port
- * @param ptpPortMode [in]- Mode of operation of PTP port (Master or Slave)
- *
- * This API will identify the time stamping capability of a PTP port by means
- * of obtaining its mode of operation.
- *
- * @li Re-entrant : No
- * @li ISR Callable : No
- *
- * @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful
- * @li IX_TIMESYNCACC_INVALIDPARAM - Invalid parameters passed
- * @li IX_TIMESYNCACC_FAILED - Internal error occurred
- */
-PUBLIC IxTimeSyncAccStatus
-ixTimeSyncAccPTPPortConfigGet(IxTimeSyncAcc1588PTPPort ptpPort,
- IxTimeSyncAcc1588PTPPortMode *ptpPortMode);
-
-/**
- * @ingroup IxTimeSyncAcc
- *
- * @fn IxTimeSyncAccStatus ixTimeSyncAccPTPRxPoll(
- IxTimeSyncAcc1588PTPPort ptpPort,
- IxTimeSyncAccPtpMsgData *ptpMsgData)
- *
- * @brief Polls the IEEE 1588 message/time stamp detect status on a particular
- * PTP Port on the Receive side.
- *
- * @param ptpPort [in] - PTP port to poll
- * @param ptpMsgData [out] - Current TimeStamp and other Data
- *
- * This API will poll for the availability of a time stamp on the received Sync
- * (Slave) or Delay_Req (Master) messages.
- * The client application will provide the buffer.
- *
- * @li Re-entrant : No
- * @li ISR Callable : No
- *
- * @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful
- * @li IX_TIMESYNCACC_INVALIDPARAM - Invalid parameters passed
- * @li IX_TIMESYNCACC_NOTIMESTAMP - No time stamp available
- * @li IX_TIMESYNCACC_FAILED - Internal error occurred
- */
-PUBLIC IxTimeSyncAccStatus
-ixTimeSyncAccPTPRxPoll(IxTimeSyncAcc1588PTPPort ptpPort,
- IxTimeSyncAccPtpMsgData *ptpMsgData);
-
-/**
- * @ingroup IxTimeSyncAcc
- *
- * @fn IxTimeSyncAccStatus ixTimeSyncAccPTPTxPoll(
- IxTimeSyncAcc1588PTPPort ptpPort,
- IxTimeSyncAccPtpMsgData *ptpMsgData)
- *
- *
- * @brief Polls the IEEE 1588 message/time stamp detect status on a particular
- * PTP Port on the Transmit side.
- *
- * @param ptpPort [in] - PTP port to poll
- * @param ptpMsgData [out] - Current TimeStamp and other Data
- *
- * This API will poll for the availability of a time stamp on the transmitted
- * Sync (Master) or Delay_Req (Slave) messages.
- * The client application will provide the buffer.
- *
- * @li Re-entrant : No
- * @li ISR Callable : No
- *
- * @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful
- * @li IX_TIMESYNCACC_INVALIDPARAM - Invalid parameters passed
- * @li IX_TIMESYNCACC_NOTIMESTAMP - No time stamp available
- * @li IX_TIMESYNCACC_FAILED - Internal error occurred
- */
-PUBLIC IxTimeSyncAccStatus
-ixTimeSyncAccPTPTxPoll(IxTimeSyncAcc1588PTPPort ptpPort,
- IxTimeSyncAccPtpMsgData *ptpMsgData);
-
-/**
- * @ingroup IxTimeSyncAcc
- *
- * @fn IxTimeSyncAccStatus ixTimeSyncAccSystemTimeSet(
- IxTimeSyncAccTimeValue systemTime)
- *
- * @brief Sets the System Time in the IEEE 1588 hardware assist block
- *
- * @param systemTime [in] - Value to set System Time
- *
- * This API will set the SystemTime to given value.
- *
- * @li Re-entrant : yes
- * @li ISR Callable : no
- *
- * @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful
- * @li IX_TIMESYNCACC_FAILED - Internal error occurred
- */
-PUBLIC IxTimeSyncAccStatus
-ixTimeSyncAccSystemTimeSet(IxTimeSyncAccTimeValue systemTime);
-
-/**
- * @ingroup IxTimeSyncAcc
- *
- * @fn IxTimeSyncAccStatus ixTimeSyncAccSystemTimeGet(
- IxTimeSyncAccTimeValue *systemTime)
- *
- * @brief Gets the System Time from the IEEE 1588 hardware assist block
- *
- * @param systemTime [out] - Copy the current System Time into the client
- * application provided buffer
- *
- * This API will get the SystemTime from IEEE1588 block and return to client
- *
- * @li Re-entrant : no
- * @li ISR Callable : no
- *
- * @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful
- * @li IX_TIMESYNCACC_INVALIDPARAM - Invalid parameters passed
- * @li IX_TIMESYNCACC_FAILED - Internal error occurred
- */
-PUBLIC IxTimeSyncAccStatus
-ixTimeSyncAccSystemTimeGet(IxTimeSyncAccTimeValue *systemTime);
-
-/**
- * @ingroup IxTimeSyncAcc
- *
- * @fn IxTimeSyncAccStatus ixTimeSyncAccTickRateSet(
- UINT32 tickRate)
- *
- * @brief Sets the Tick Rate (Frequency Scaling Value) in the IEEE 1588
- * hardware assist block
- *
- * @param tickRate [in] - Value to set Tick Rate
- *
- * This API will set the Tick Rate (Frequency Scaling Value) in the IEEE
- * 1588 block to the given value. The Accumulator register (not client
- * visible) is incremented by this TickRate value every clock cycle. When
- * the Accumulator overflows, the SystemTime is incremented by one. This
- * TickValue can therefore be used to adjust the system timer.
- *
- * @li Re-entrant : yes
- * @li ISR Callable : no
- *
- * @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful
- * @li IX_TIMESYNCACC_FAILED - Internal error occurred
- */
-PUBLIC IxTimeSyncAccStatus
-ixTimeSyncAccTickRateSet(UINT32 tickRate);
-
-/**
- * @ingroup IxTimeSyncAcc
- *
- * @fn IxTimeSyncAccStatus ixTimeSyncAccTickRateGet(
- UINT32 *tickRate)
- *
- * @brief Gets the Tick Rate (Frequency Scaling Value) from the IEEE 1588
- * hardware assist block
- *
- * @param tickRate [out] - Current Tick Rate value in the IEEE 1588 block
- *
- * This API will get the TickRate on IEE15588 block. Refer to @ref
- * ixTimeSyncAccTickRateSet for notes on usage of this value.
- *
- * @li Reentrant : yes
- * @li ISR Callable : no
- *
- * @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful
- * @li IX_TIMESYNCACC_INVALIDPARAM - Invalid parameters passed
- * @li IX_TIMESYNCACC_FAILED - Internal error occurred
- */
-PUBLIC IxTimeSyncAccStatus
-ixTimeSyncAccTickRateGet(UINT32 *tickRate);
-
-/**
- * @ingroup IxTimeSyncAcc
- *
- * @fn IxTimeSyncAccStatus ixTimeSyncAccTargetTimeInterruptEnable(
- IxTimeSyncAccTargetTimeCallback targetTimeCallback)
- *
- * @brief Enables the interrupt to verify the condition where the System Time
- * greater or equal to the Target Time in the IEEE 1588 hardware assist block.
- * If the condition is true an interrupt will be sent to XScale.
- *
- * @param targetTimeCallback [in] - Callback to be invoked when interrupt fires
- *
- * This API will enable the Target Time reached/hit condition interrupt.
- *
- * NOTE: The client application needs to ensure that the APIs
- * @ref ixTimeSyncAccTargetTimeInterruptEnable, @ref ixTimeSyncAccTargetTimeSet and
- * @ref ixTimeSyncAccTargetTimeInterruptDisable are accessed in mutual exclusive
- * manner with respect to each other.
- *
- * @li Re-entrant : no
- * @li ISR Callable : yes
- *
- * @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful
- * @li IX_TIMESYNCACC_INVALIDPARAM - Null parameter passed for callback
- * @li IX_TIMESYNCACC_FAILED - Internal error occurred
- */
-PUBLIC IxTimeSyncAccStatus
-ixTimeSyncAccTargetTimeInterruptEnable(IxTimeSyncAccTargetTimeCallback targetTimeCallback);
-
-/**
- * @ingroup IxTimeSyncAcc
- *
- * @fn IxTimeSyncAccStatus ixTimeSyncAccTargetTimeInterruptDisable(
- void)
- *
- * @brief Disables the interrupt for the condition explained in the function
- * description of @ref ixTimeSyncAccTargetTimeInterruptEnable.
- *
- * This API will disable the Target Time interrupt.
- *
- * NOTE: The client application needs to ensure that the APIs
- * @ref ixTimeSyncAccTargetTimeInterruptEnable, @ref ixTimeSyncAccTargetTimeSet and
- * @ref ixTimeSyncAccTargetTimeInterruptDisable are accessed in mutual exclusive
- * manner with respect to each other.
- *
- * @li Re-entrant : no
- * @li ISR Callable : yes
- *
- * @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful
- * @li IX_TIMESYNCACC_FAILED - Internal error occurred
- */
-PUBLIC IxTimeSyncAccStatus
-ixTimeSyncAccTargetTimeInterruptDisable(void);
-
-/**
- * @ingroup IxTimeSyncAcc
- *
- * @fn IxTimeSyncAccStatus ixTimeSyncAccTargetTimePoll(
- BOOL *ttmPollFlag,
- IxTimeSyncAccTimeValue *targetTime)
- *
- * @brief Poll to verify the condition where the System Time greater or equal to
- * the Target Time in the IEEE 1588 hardware assist block. If the condition is
- * true an event flag is set in the hardware.
- *
- * @param ttmPollFlag [out] - TRUE if the target time reached/hit condition event set
- * FALSE if the target time reached/hit condition event is
- not set
- * @param targetTime [out] - Capture current targetTime into client provided buffer
- *
- * Poll the target time reached/hit condition status. Return true and the current
- * target time value, if the condition is true else return false.
- *
- * NOTE: The client application will need to clear the event flag that will be set
- * as long as the condition that the System Time greater or equal to the Target Time is
- * valid, in one of the following ways:
- * 1) Invoke the API to change the target time
- * 2) Change the system timer value
- *
- * @li Re-entrant : yes
- * @li ISR Callable : no
- *
- * @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful
- * @li IX_TIMESYNCACC_INVALIDPARAM - Null parameter passed
- * @li IX_TIMESYNCACC_FAILED - Internal error occurred
- * @li IX_TIMESYNCACC_INTERRUPTMODEINUSE - Interrupt mode in use
- */
-PUBLIC IxTimeSyncAccStatus
-ixTimeSyncAccTargetTimePoll(BOOL *ttmPollFlag,
- IxTimeSyncAccTimeValue *targetTime);
-
-/**
- * @ingroup IxTimeSyncAcc
- *
- * @fn IxTimeSyncAccStatus ixTimeSyncAccTargetTimeSet(
- IxTimeSyncAccTimeValue targetTime)
- *
- * @brief Sets the Target Time in the IEEE 1588 hardware assist block
- *
- * @param targetTime [in] - Value to set Target Time
- *
- * This API will set the Target Time to a given value.
- *
- * NOTE: The client application needs to ensure that the APIs
- * @ref ixTimeSyncAccTargetTimeInterruptEnable, @ref ixTimeSyncAccTargetTimeSet and
- * @ref ixTimeSyncAccTargetTimeInterruptDisable are accessed in mutual exclusive
- * manner with respect to each other.
- *
- * @li Reentrant : no
- * @li ISR Callable : yes
- *
- * @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful
- * @li IX_TIMESYNCACC_FAILED - Internal error occurred
- */
-PUBLIC IxTimeSyncAccStatus
-ixTimeSyncAccTargetTimeSet(IxTimeSyncAccTimeValue targetTime);
-
-/**
- * @ingroup IxTimeSyncAcc
- *
- * @fn IxTimeSyncAccStatus ixTimeSyncAccTargetTimeGet(
- IxTimeSyncAccTimeValue *targetTime)
- *
- * @brief Gets the Target Time in the IEEE 1588 hardware assist block
- *
- * @param targetTime [out] - Copy current time to client provided buffer
- *
- * This API will get the Target Time from IEEE 1588 block and return to the
- * client application
- *
- * @li Re-entrant : yes
- * @li ISR Callable : no
- *
- * @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful
- * @li IX_TIMESYNCACC_INVALIDPARAM - Null parameter passed
- * @li IX_TIMESYNCACC_FAILED - Internal error occurred
- */
-PUBLIC IxTimeSyncAccStatus
-ixTimeSyncAccTargetTimeGet(IxTimeSyncAccTimeValue *targetTime);
-
-/**
- * @ingroup IxTimeSyncAcc
- *
- * @fn IxTimeSyncAccStatus ixTimeSyncAccAuxTimeInterruptEnable(
- IxTimeSyncAccAuxMode auxMode,
- IxTimeSyncAccAuxTimeCallback auxTimeCallback)
- *
- * @brief Enables the interrupt notification for the given mode of Auxiliary Time
- * Stamp in the IEEE 1588 hardware assist block
- *
- * @param auxMode [in] - Auxiliary time stamp register (slave or master) to use
- * @param auxTimeCallback [in] - Callback to be invoked when interrupt fires
- *
- * This API will enable the Auxiliary Master/Slave Time stamp Interrupt.
- *
- * <pre>
- * NOTE: 1) An individual callback is to be registered for each Slave and Master
- * Auxiliary Time Stamp registers. Thus to register for both Master and Slave time
- * stamp interrupts either the same callback or two separate callbacks the API has
- * to be invoked twice.
- * 2) On the IXDP465 Development Platform, the Auxiliary Timestamp signal for
- * slave mode is tied to GPIO 8 pin. This signal is software routed by default to
- * PCI for backwards compatibility with the IXDP425 Development Platform. This
- * routing must be disabled for the auxiliary slave time stamp register to work
- * properly. The following commands may be used to accomplish this. However, refer
- * to the IXDP465 Development Platform Users Guide or the BSP/LSP documentation for
- * more specific information.
- *
- * For Linux (at the Redboot prompt i.e., before loading zImage):
- * mfill -b 0x54100000 -1 -l 1 -p 8
- * mfill -b 0x54100001 -1 -l 1 -p 0x7f
- * For vxWorks, at the prompt:
- * intDisable(25)
- * ixdp400FpgaIODetach(8)
- * </pre>
- *
- * @li Re-entrant : no
- * @li ISR Callable : no
- *
- * @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful
- * @li IX_TIMESYNCACC_INVALIDPARAM - Null parameter passed for callback or
- invalid auxiliary snapshot mode
- * @li IX_TIMESYNCACC_FAILED - Internal error occurred
- */
-PUBLIC IxTimeSyncAccStatus
-ixTimeSyncAccAuxTimeInterruptEnable(IxTimeSyncAccAuxMode auxMode,
- IxTimeSyncAccAuxTimeCallback auxTimeCallback);
-
-/**
- * @ingroup IxTimeSyncAcc
- *
- * @fn IxTimeSyncAccStatus ixTimeSyncAccAuxTimeInterruptDisable(
- IxTimeSyncAccAuxMode auxMode)
- *
- * @brief Disables the interrupt for the indicated mode of Auxiliary Time Stamp
- * in the IEEE 1588 hardware assist block
- *
- * @param auxMode [in] - Auxiliary time stamp mode (slave or master) using which
- * the interrupt will be disabled.
- *
- * This API will disable the Auxiliary Time Stamp Interrupt (Master or Slave)
- *
- * @li Re-entrant : yes
- * @li ISR Callable : no
- *
- * @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful
- * @li IX_TIMESYNCACC_INVALIDPARAM - Invalid parameters passed
- * @li IX_TIMESYNCACC_FAILED - Internal error occurred
- */
-PUBLIC IxTimeSyncAccStatus
-ixTimeSyncAccAuxTimeInterruptDisable(IxTimeSyncAccAuxMode auxMode);
-
-/**
- * @ingroup IxTimeSyncAcc
- *
- * @fn IxTimeSyncAccStatus ixTimeSyncAccAuxTimePoll(
- IxTimeSyncAccAuxMode auxMode,
- BOOL *auxPollFlag,
- IxTimeSyncAccTimeValue *auxTime)
- *
- * @brief Poll for the Auxiliary Time Stamp captured for the mode indicated
- * (Master or Slave)
- *
- * @param auxMode [in] - Auxiliary Snapshot Register (Slave or Master) to be checked
- * @param auxPollFlag [out] - TRUE if the time stamp captured in auxiliary
- snapshot register
- * FALSE if the time stamp not captured in
- auxiliary snapshot register
- * @param auxTime [out] - Copy the current Auxiliary Snapshot Register value into the
- * client provided buffer
- *
- * Polls for the Time stamp in the appropriate Auxiliary Snapshot Registers based
- * on the mode specified. Return true and the contents of the Auxiliary snapshot,
- * if it is available else return false.
- *
- * Please refer to the note #2 of the API @ref ixTimeSyncAccAuxTimeInterruptEnable
- * for more information for Auxiliary Slave mode.
- *
- * @li Re-entrant : yes
- * @li ISR Callable : no
- *
- * @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful
- * @li IX_TIMESYNCACC_INVALIDPARAM - Null parameter passed for auxPollFlag,
- callback or invalid auxiliary snapshot mode
- * @li IX_TIMESYNCACC_FAILED - Internal error occurred
- * @li IX_TIMESYNCACC_INTERRUPTMODEINUSE - Interrupt mode in use
- */
-PUBLIC IxTimeSyncAccStatus
-ixTimeSyncAccAuxTimePoll(IxTimeSyncAccAuxMode auxMode,
- BOOL *auxPollFlag,
- IxTimeSyncAccTimeValue *auxTime);
-
-/**
- * @ingroup IxTimeSyncAcc
- *
- * @fn IxTimeSyncAccStatus ixTimeSyncAccReset(void)
- *
- * @brief Resets the IEEE 1588 hardware assist block
- *
- * Sets the reset bit in the IEEE1588 silicon which fully resets the silicon block
- *
- * @li Reentrant : yes
- * @li ISR Callable : no
- *
- * @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful
- * @li IX_TIMESYNCACC_FAILED - Internal error occurred
- */
-PUBLIC IxTimeSyncAccStatus
-ixTimeSyncAccReset(void);
-
-/**
- * @ingroup IxTimeSyncAcc
- *
- * @fn IxTimeSyncAccStatus ixTimeSyncAccStatsGet(IxTimeSyncAccStats
- *timeSyncStats)
- *
- * @brief Returns the IxTimeSyncAcc Statistics in the client supplied buffer
- *
- * @param timeSyncStats [out] - TimeSync statistics counter values
- *
- * This API will return the statistics of the received or transmitted messages.
- *
- * NOTE: 1) These counters are updated only when the client polls for the time
- * stamps or interrupt are enabled. This is because the IxTimeSyncAcc module
- * does not either transmit or receive messages and does only run the code
- * when explicit requests received by client application.
- *
- * 2) These statistics reflect the number of valid PTP messages exchanged
- * in Master and Slave modes but includes all the messages (including valid
- * non-PTP messages) while operating in the Any mode.
- *
- * @li Reentrant : no
- * @li ISR Callable : no
- *
- * @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful
- * @li IX_TIMESYNCACC_INVALIDPARAM - NULL parameter passed
- * @li IX_TIMESYNCACC_FAILED - Internal error occurred
- */
-PUBLIC IxTimeSyncAccStatus
-ixTimeSyncAccStatsGet(IxTimeSyncAccStats *timeSyncStats);
-
-/**
- * @ingroup IxTimeSyncAcc
- *
- * @fn void ixTimeSyncAccStatsReset(void)
- *
- * @brief Reset Time Sync statistics
- *
- * This API will reset the statistics counters of the TimeSync access layer.
- *
- * @li Reentrant : yes
- * @li ISR Callable: no
- *
- * @return @li None
- */
-PUBLIC void
-ixTimeSyncAccStatsReset(void);
-
-/**
- * @ingroup IxTimeSyncAcc
- *
- * @fn IxTimeSyncAccStatus ixTimeSyncAccShow(void)
- *
- * @brief Displays the Time Sync current status
- *
- * This API will display status on the current configuration of the IEEE
- * 1588 hardware assist block, contents of the various time stamp registers,
- * outstanding interrupts and/or events.
- *
- * Note that this is intended for debug only, and in contrast to the other
- * functions, it does not clear the any of the status bits associated with
- * active timestamps and so is passive in its nature.
- *
- * @li Reentrant : yes
- * @li ISR Callable : no
- *
- * @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful
- * @li IX_TIMESYNCACC_FAILED - Internal error occurred
- */
-PUBLIC IxTimeSyncAccStatus
-ixTimeSyncAccShow(void);
-
-#endif /* __ixp46X */
-#endif /* IXTIMESYNCACC_H */
-
-/**
- * @} defgroup IxTimeSyncAcc
- */
-