diff options
Diffstat (limited to 'cpu/blackfin/cpu.c')
| -rw-r--r-- | cpu/blackfin/cpu.c | 141 |
1 files changed, 141 insertions, 0 deletions
diff --git a/cpu/blackfin/cpu.c b/cpu/blackfin/cpu.c new file mode 100644 index 00000000000..53de5aba67d --- /dev/null +++ b/cpu/blackfin/cpu.c @@ -0,0 +1,141 @@ +/* + * U-boot - cpu.c CPU specific functions + * + * Copyright (c) 2005-2008 Analog Devices Inc. + * + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Licensed under the GPL-2 or later. + */ + +#include <common.h> +#include <command.h> +#include <asm/blackfin.h> +#include <asm/cplb.h> +#include <asm/mach-common/bits/core.h> +#include <asm/mach-common/bits/mpu.h> +#include <asm/mach-common/bits/trace.h> + +#include "cpu.h" +#include "serial.h" + +void icache_enable(void) +{ + bfin_write_IMEM_CONTROL(bfin_read_IMEM_CONTROL() | (IMC | ENICPLB)); + SSYNC(); +} + +void icache_disable(void) +{ + bfin_write_IMEM_CONTROL(bfin_read_IMEM_CONTROL() & ~(IMC | ENICPLB)); + SSYNC(); +} + +int icache_status(void) +{ + return bfin_read_IMEM_CONTROL() & ENICPLB; +} + +void dcache_enable(void) +{ + bfin_write_DMEM_CONTROL(bfin_read_DMEM_CONTROL() | (ACACHE_BCACHE | ENDCPLB | PORT_PREF0)); + SSYNC(); +} + +void dcache_disable(void) +{ + bfin_write_DMEM_CONTROL(bfin_read_DMEM_CONTROL() & ~(ACACHE_BCACHE | ENDCPLB | PORT_PREF0)); + SSYNC(); +} + +int dcache_status(void) +{ + return bfin_read_DMEM_CONTROL() & ENDCPLB; +} + +__attribute__ ((__noreturn__)) +void cpu_init_f(ulong bootflag, ulong loaded_from_ldr) +{ + /* Build a NOP slide over the LDR jump block. Whee! */ + serial_early_puts("NOP Slide\n"); + char nops[0xC]; + memset(nops, 0x00, sizeof(nops)); + extern char _stext_l1; + memcpy(&_stext_l1 - sizeof(nops), nops, sizeof(nops)); + + if (!loaded_from_ldr) { + /* Relocate sections into L1 if the LDR didn't do it -- don't + * check length because the linker script does the size + * checking at build time. + */ + serial_early_puts("L1 Relocate\n"); + extern char _stext_l1, _etext_l1, _stext_l1_lma; + memcpy(&_stext_l1, &_stext_l1_lma, (&_etext_l1 - &_stext_l1)); + extern char _sdata_l1, _edata_l1, _sdata_l1_lma; + memcpy(&_sdata_l1, &_sdata_l1_lma, (&_edata_l1 - &_sdata_l1)); + } +#if defined(__ADSPBF537__) || defined(__ADSPBF536__) || defined(__ADSPBF534__) + /* The BF537 bootrom will reset the EBIU_AMGCTL register on us + * after it has finished loading the LDR. So configure it again. + */ + else + bfin_write_EBIU_AMGCTL(CONFIG_EBIU_AMGCTL_VAL); +#endif + +#ifdef CONFIG_DEBUG_DUMP + /* Turn on hardware trace buffer */ + bfin_write_TBUFCTL(TBUFPWR | TBUFEN); +#endif + +#ifndef CONFIG_PANIC_HANG + /* Reset upon a double exception rather than just hanging. + * Do not do bfin_read on SWRST as that will reset status bits. + */ + bfin_write_SWRST(DOUBLE_FAULT); +#endif + + serial_early_puts("Board init flash\n"); + board_init_f(bootflag); +} + +int exception_init(void) +{ + bfin_write_EVT3(trap); + return 0; +} + +int irq_init(void) +{ +#ifdef SIC_IMASK0 + bfin_write_SIC_IMASK0(0); + bfin_write_SIC_IMASK1(0); +# ifdef SIC_IMASK2 + bfin_write_SIC_IMASK2(0); +# endif +#elif defined(SICA_IMASK0) + bfin_write_SICA_IMASK0(0); + bfin_write_SICA_IMASK1(0); +#else + bfin_write_SIC_IMASK(0); +#endif + bfin_write_EVT2(evt_default); /* NMI */ + bfin_write_EVT5(evt_default); /* hardware error */ + bfin_write_EVT6(evt_default); /* core timer */ + bfin_write_EVT7(evt_default); + bfin_write_EVT8(evt_default); + bfin_write_EVT9(evt_default); + bfin_write_EVT10(evt_default); + bfin_write_EVT11(evt_default); + bfin_write_EVT12(evt_default); + bfin_write_EVT13(evt_default); + bfin_write_EVT14(evt_default); + bfin_write_EVT15(evt_default); + bfin_write_ILAT(0); + CSYNC(); + /* enable all interrupts except for core timer */ + irq_flags = 0xffffffbf; + local_irq_enable(); + CSYNC(); + return 0; +} |