summaryrefslogtreecommitdiff
path: root/cpu/bf561/init_sdram_bootrom_initblock.S
diff options
context:
space:
mode:
Diffstat (limited to 'cpu/bf561/init_sdram_bootrom_initblock.S')
-rw-r--r--cpu/bf561/init_sdram_bootrom_initblock.S189
1 files changed, 0 insertions, 189 deletions
diff --git a/cpu/bf561/init_sdram_bootrom_initblock.S b/cpu/bf561/init_sdram_bootrom_initblock.S
deleted file mode 100644
index 9cc5e78b04..0000000000
--- a/cpu/bf561/init_sdram_bootrom_initblock.S
+++ /dev/null
@@ -1,189 +0,0 @@
-#define ASSEMBLY
-
-#include <linux/config.h>
-#include <config.h>
-#include <asm/blackfin.h>
-#include <asm/mem_init.h>
-#include <asm/mach-common/bits/bootrom.h>
-#include <asm/mach-common/bits/ebiu.h>
-#include <asm/mach-common/bits/pll.h>
-#include <asm/mach-common/bits/uart.h>
-.global init_sdram;
-
-#if (CONFIG_CCLK_DIV == 1)
-#define CONFIG_CCLK_ACT_DIV CCLK_DIV1
-#endif
-#if (CONFIG_CCLK_DIV == 2)
-#define CONFIG_CCLK_ACT_DIV CCLK_DIV2
-#endif
-#if (CONFIG_CCLK_DIV == 4)
-#define CONFIG_CCLK_ACT_DIV CCLK_DIV4
-#endif
-#if (CONFIG_CCLK_DIV == 8)
-#define CONFIG_CCLK_ACT_DIV CCLK_DIV8
-#endif
-#ifndef CONFIG_CCLK_ACT_DIV
-#define CONFIG_CCLK_ACT_DIV CONFIG_CCLK_DIV_not_defined_properly
-#endif
-
-init_sdram:
- [--SP] = ASTAT;
- [--SP] = RETS;
- [--SP] = (R7:0);
- [--SP] = (P5:0);
-
-
- p0.h = hi(SICA_IWR0);
- p0.l = lo(SICA_IWR0);
- r0.l = 0x1;
- w[p0] = r0.l;
- SSYNC;
-
- p0.h = hi(SPI_BAUD);
- p0.l = lo(SPI_BAUD);
- r0.l = CONFIG_SPI_BAUD_INITBLOCK;
- w[p0] = r0.l;
- SSYNC;
-
- /*
- * PLL_LOCKCNT - how many SCLK Cycles to delay while PLL becomes stable
- */
- p0.h = hi(PLL_LOCKCNT);
- p0.l = lo(PLL_LOCKCNT);
- r0 = 0x300(Z);
- w[p0] = r0.l;
- ssync;
-
- /*
- * Put SDRAM in self-refresh, incase anything is running
- */
- P2.H = hi(EBIU_SDGCTL);
- P2.L = lo(EBIU_SDGCTL);
- R0 = [P2];
- BITSET (R0, 24);
- [P2] = R0;
- SSYNC;
-
- /*
- * Set PLL_CTL with the value that we calculate in R0
- * - [14:09] = MSEL[5:0] : CLKIN / VCO multiplication factors
- * - [8] = BYPASS : BYPASS the PLL, run CLKIN into CCLK/SCLK
- * - [7] = output delay (add 200ps of delay to mem signals)
- * - [6] = input delay (add 200ps of input delay to mem signals)
- * - [5] = PDWN : 1=All Clocks off
- * - [3] = STOPCK : 1=Core Clock off
- * - [1] = PLL_OFF : 1=Disable Power to PLL
- * - [0] = DF : 1=Pass CLKIN/2 to PLL / 0=Pass CLKIN to PLL
- * all other bits set to zero
- */
-
- r0 = CONFIG_VCO_MULT & 63; /* Load the VCO multiplier */
- r0 = r0 << 9; /* Shift it over, */
- r1 = CONFIG_CLKIN_HALF; /* Do we need to divide CLKIN by 2? */
- r0 = r1 | r0;
- r1 = CONFIG_PLL_BYPASS; /* Bypass the PLL? */
- r1 = r1 << 8; /* Shift it over */
- r0 = r1 | r0; /* add them all together */
-
- p0.h = hi(PLL_CTL);
- p0.l = lo(PLL_CTL); /* Load the address */
- cli r2; /* Disable interrupts */
- ssync;
- w[p0] = r0.l; /* Set the value */
- idle; /* Wait for the PLL to stablize */
- sti r2; /* Enable interrupts */
-
-check_again:
- p0.h = hi(PLL_STAT);
- p0.l = lo(PLL_STAT);
- R0 = W[P0](Z);
- CC = BITTST(R0,5);
- if ! CC jump check_again;
-
- /* Configure SCLK & CCLK Dividers */
- r0 = (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV);
- p0.h = hi(PLL_DIV);
- p0.l = lo(PLL_DIV);
- w[p0] = r0.l;
- ssync;
-
- /*
- * We now are running at speed, time to set the Async mem bank wait states
- * This will speed up execution, since we are normally running from FLASH.
- */
-
- p2.h = (EBIU_AMBCTL1 >> 16);
- p2.l = (EBIU_AMBCTL1 & 0xFFFF);
- r0.h = (AMBCTL1VAL >> 16);
- r0.l = (AMBCTL1VAL & 0xFFFF);
- [p2] = r0;
- ssync;
-
- p2.h = (EBIU_AMBCTL0 >> 16);
- p2.l = (EBIU_AMBCTL0 & 0xFFFF);
- r0.h = (AMBCTL0VAL >> 16);
- r0.l = (AMBCTL0VAL & 0xFFFF);
- [p2] = r0;
- ssync;
-
- p2.h = (EBIU_AMGCTL >> 16);
- p2.l = (EBIU_AMGCTL & 0xffff);
- r0 = AMGCTLVAL;
- w[p2] = r0;
- ssync;
-
- /*
- * Now, Initialize the SDRAM,
- * start with the SDRAM Refresh Rate Control Register
- */
- p0.l = lo(EBIU_SDRRC);
- p0.h = hi(EBIU_SDRRC);
- r0 = mem_SDRRC;
- w[p0] = r0.l;
- ssync;
-
- /*
- * SDRAM Memory Bank Control Register - bank specific parameters
- */
- p0.l = (EBIU_SDBCTL & 0xFFFF);
- p0.h = (EBIU_SDBCTL >> 16);
- r0 = mem_SDBCTL;
- w[p0] = r0.l;
- ssync;
-
- /*
- * SDRAM Global Control Register - global programmable parameters
- * Disable self-refresh
- */
- P2.H = hi(EBIU_SDGCTL);
- P2.L = lo(EBIU_SDGCTL);
- R0 = [P2];
- BITCLR (R0, 24);
-
- /*
- * Check if SDRAM is already powered up, if it is, enable self-refresh
- */
- p0.h = hi(EBIU_SDSTAT);
- p0.l = lo(EBIU_SDSTAT);
- r2.l = w[p0];
- cc = bittst(r2,3);
- if !cc jump skip;
- NOP;
- BITSET (R0, 23);
-skip:
- [P2] = R0;
- SSYNC;
-
- /* Write in the new value in the register */
- R0.L = lo(mem_SDGCTL);
- R0.H = hi(mem_SDGCTL);
- [P2] = R0;
- SSYNC;
- nop;
-
-
- (P5:0) = [SP++];
- (R7:0) = [SP++];
- RETS = [SP++];
- ASTAT = [SP++];
- RTS;