summaryrefslogtreecommitdiff
path: root/cpu/arm_cortexa8/omap3/sys_info.c
diff options
context:
space:
mode:
Diffstat (limited to 'cpu/arm_cortexa8/omap3/sys_info.c')
-rw-r--r--cpu/arm_cortexa8/omap3/sys_info.c299
1 files changed, 0 insertions, 299 deletions
diff --git a/cpu/arm_cortexa8/omap3/sys_info.c b/cpu/arm_cortexa8/omap3/sys_info.c
deleted file mode 100644
index 08fb32eaae..0000000000
--- a/cpu/arm_cortexa8/omap3/sys_info.c
+++ /dev/null
@@ -1,299 +0,0 @@
-/*
- * (C) Copyright 2008
- * Texas Instruments, <www.ti.com>
- *
- * Author :
- * Manikandan Pillai <mani.pillai@ti.com>
- *
- * Derived from Beagle Board and 3430 SDP code by
- * Richard Woodruff <r-woodruff2@ti.com>
- * Syed Mohammed Khasim <khasim@ti.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/mem.h> /* get mem tables */
-#include <asm/arch/sys_proto.h>
-#include <i2c.h>
-
-extern omap3_sysinfo sysinfo;
-static struct sdrc *sdrc_base = (struct sdrc *)OMAP34XX_SDRC_BASE;
-static struct ctrl *ctrl_base = (struct ctrl *)OMAP34XX_CTRL_BASE;
-static char *rev_s[CPU_3XX_MAX_REV] = {
- "1.0",
- "2.0",
- "2.1",
- "3.0",
- "3.1"};
-
-/*****************************************************************
- * dieid_num_r(void) - read and set die ID
- *****************************************************************/
-void dieid_num_r(void)
-{
- struct ctrl_id *id_base = (struct ctrl_id *)OMAP34XX_ID_L4_IO_BASE;
- char *uid_s, die_id[34];
- u32 id[4];
-
- memset(die_id, 0, sizeof(die_id));
-
- uid_s = getenv("dieid#");
-
- if (uid_s == NULL) {
- id[3] = readl(&id_base->die_id_0);
- id[2] = readl(&id_base->die_id_1);
- id[1] = readl(&id_base->die_id_2);
- id[0] = readl(&id_base->die_id_3);
- sprintf(die_id, "%08x%08x%08x%08x", id[0], id[1], id[2], id[3]);
- setenv("dieid#", die_id);
- uid_s = die_id;
- }
-
- printf("Die ID #%s\n", uid_s);
-}
-
-/******************************************
- * get_cpu_type(void) - extract cpu info
- ******************************************/
-u32 get_cpu_type(void)
-{
- return readl(&ctrl_base->ctrl_omap_stat);
-}
-
-/******************************************
- * get_cpu_rev(void) - extract version info
- ******************************************/
-u32 get_cpu_rev(void)
-{
- u32 cpuid = 0;
- struct ctrl_id *id_base;
-
- /*
- * On ES1.0 the IDCODE register is not exposed on L4
- * so using CPU ID to differentiate between ES1.0 and > ES1.0.
- */
- __asm__ __volatile__("mrc p15, 0, %0, c0, c0, 0":"=r"(cpuid));
- if ((cpuid & 0xf) == 0x0)
- return CPU_3XX_ES10;
- else {
- /* Decode the IDs on > ES1.0 */
- id_base = (struct ctrl_id *) OMAP34XX_ID_L4_IO_BASE;
-
- cpuid = (readl(&id_base->idcode) >> CPU_3XX_ID_SHIFT) & 0xf;
-
- /* Some early ES2.0 seem to report ID 0, fix this */
- if(cpuid == 0)
- cpuid = CPU_3XX_ES20;
-
- return cpuid;
- }
-}
-
-/****************************************************
- * is_mem_sdr() - return 1 if mem type in use is SDR
- ****************************************************/
-u32 is_mem_sdr(void)
-{
- if (readl(&sdrc_base->cs[CS0].mr) == SDRC_MR_0_SDR)
- return 1;
- return 0;
-}
-
-/***********************************************************************
- * get_cs0_size() - get size of chip select 0/1
- ************************************************************************/
-u32 get_sdr_cs_size(u32 cs)
-{
- u32 size;
-
- /* get ram size field */
- size = readl(&sdrc_base->cs[cs].mcfg) >> 8;
- size &= 0x3FF; /* remove unwanted bits */
- size <<= 21; /* multiply by 2 MiB to find size in MB */
- return size;
-}
-
-/***********************************************************************
- * get_sdr_cs_offset() - get offset of cs from cs0 start
- ************************************************************************/
-u32 get_sdr_cs_offset(u32 cs)
-{
- u32 offset;
-
- if (!cs)
- return 0;
-
- offset = readl(&sdrc_base->cs_cfg);
- offset = (offset & 15) << 27 | (offset & 0x30) >> 17;
-
- return offset;
-}
-
-/***************************************************************************
- * get_gpmc0_base() - Return current address hardware will be
- * fetching from. The below effectively gives what is correct, its a bit
- * mis-leading compared to the TRM. For the most general case the mask
- * needs to be also taken into account this does work in practice.
- * - for u-boot we currently map:
- * -- 0 to nothing,
- * -- 4 to flash
- * -- 8 to enent
- * -- c to wifi
- ****************************************************************************/
-u32 get_gpmc0_base(void)
-{
- u32 b;
-
- b = readl(&gpmc_cfg->cs[0].config7);
- b &= 0x1F; /* keep base [5:0] */
- b = b << 24; /* ret 0x0b000000 */
- return b;
-}
-
-/*******************************************************************
- * get_gpmc0_width() - See if bus is in x8 or x16 (mainly for nand)
- *******************************************************************/
-u32 get_gpmc0_width(void)
-{
- return WIDTH_16BIT;
-}
-
-/*************************************************************************
- * get_board_rev() - setup to pass kernel board revision information
- * returns:(bit[0-3] sub version, higher bit[7-4] is higher version)
- *************************************************************************/
-u32 get_board_rev(void)
-{
- return 0x20;
-}
-
-/********************************************************
- * get_base(); get upper addr of current execution
- *******************************************************/
-u32 get_base(void)
-{
- u32 val;
-
- __asm__ __volatile__("mov %0, pc \n":"=r"(val)::"memory");
- val &= 0xF0000000;
- val >>= 28;
- return val;
-}
-
-/********************************************************
- * is_running_in_flash() - tell if currently running in
- * FLASH.
- *******************************************************/
-u32 is_running_in_flash(void)
-{
- if (get_base() < 4)
- return 1; /* in FLASH */
-
- return 0; /* running in SRAM or SDRAM */
-}
-
-/********************************************************
- * is_running_in_sram() - tell if currently running in
- * SRAM.
- *******************************************************/
-u32 is_running_in_sram(void)
-{
- if (get_base() == 4)
- return 1; /* in SRAM */
-
- return 0; /* running in FLASH or SDRAM */
-}
-
-/********************************************************
- * is_running_in_sdram() - tell if currently running in
- * SDRAM.
- *******************************************************/
-u32 is_running_in_sdram(void)
-{
- if (get_base() > 4)
- return 1; /* in SDRAM */
-
- return 0; /* running in SRAM or FLASH */
-}
-
-/***************************************************************
- * get_boot_type() - Is this an XIP type device or a stream one
- * bits 4-0 specify type. Bit 5 says mem/perif
- ***************************************************************/
-u32 get_boot_type(void)
-{
- return (readl(&ctrl_base->status) & SYSBOOT_MASK);
-}
-
-/*************************************************************
- * get_device_type(): tell if GP/HS/EMU/TST
- *************************************************************/
-u32 get_device_type(void)
-{
- return ((readl(&ctrl_base->status) & (DEVICE_MASK)) >> 8);
-}
-
-#ifdef CONFIG_DISPLAY_CPUINFO
-/**
- * Print CPU information
- */
-int print_cpuinfo (void)
-{
- char *cpu_s, *sec_s;
-
- switch (get_cpu_type()) {
- case OMAP3503:
- cpu_s = "3503";
- break;
- case OMAP3515:
- cpu_s = "3515";
- break;
- case OMAP3525:
- cpu_s = "3525";
- break;
- case OMAP3530:
- cpu_s = "3530";
- break;
- default:
- cpu_s = "35XX";
- break;
- }
-
- switch (get_device_type()) {
- case TST_DEVICE:
- sec_s = "TST";
- break;
- case EMU_DEVICE:
- sec_s = "EMU";
- break;
- case HS_DEVICE:
- sec_s = "HS";
- break;
- case GP_DEVICE:
- sec_s = "GP";
- break;
- default:
- sec_s = "?";
- }
-
- printf("OMAP%s-%s ES%s, CPU-OPP2 L3-165MHz\n",
- cpu_s, sec_s, rev_s[get_cpu_rev()]);
-
- return 0;
-}
-#endif /* CONFIG_DISPLAY_CPUINFO */
generated by cgit v1.2.3 (git 2.0.4) at 2024-07-07 05:31:13 +0000