summaryrefslogtreecommitdiff
path: root/cpu/arm_cortexa8/omap3/mem.c
diff options
context:
space:
mode:
Diffstat (limited to 'cpu/arm_cortexa8/omap3/mem.c')
-rw-r--r--cpu/arm_cortexa8/omap3/mem.c281
1 files changed, 0 insertions, 281 deletions
diff --git a/cpu/arm_cortexa8/omap3/mem.c b/cpu/arm_cortexa8/omap3/mem.c
deleted file mode 100644
index dfb7e4c2ad..0000000000
--- a/cpu/arm_cortexa8/omap3/mem.c
+++ /dev/null
@@ -1,281 +0,0 @@
-/*
- * (C) Copyright 2008
- * Texas Instruments, <www.ti.com>
- *
- * Author :
- * Manikandan Pillai <mani.pillai@ti.com>
- *
- * Initial Code from:
- * Richard Woodruff <r-woodruff2@ti.com>
- * Syed Mohammed Khasim <khasim@ti.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/mem.h>
-#include <asm/arch/sys_proto.h>
-#include <command.h>
-
-/*
- * Only One NAND allowed on board at a time.
- * The GPMC CS Base for the same
- */
-unsigned int boot_flash_base;
-unsigned int boot_flash_off;
-unsigned int boot_flash_sec;
-unsigned int boot_flash_type;
-volatile unsigned int boot_flash_env_addr;
-
-struct gpmc *gpmc_cfg;
-
-#if defined(CONFIG_CMD_NAND)
-static const u32 gpmc_m_nand[GPMC_MAX_REG] = {
- M_NAND_GPMC_CONFIG1,
- M_NAND_GPMC_CONFIG2,
- M_NAND_GPMC_CONFIG3,
- M_NAND_GPMC_CONFIG4,
- M_NAND_GPMC_CONFIG5,
- M_NAND_GPMC_CONFIG6, 0
-};
-
-#if defined(CONFIG_ENV_IS_IN_NAND)
-#define GPMC_CS 0
-#else
-#define GPMC_CS 1
-#endif
-
-#endif
-
-#if defined(CONFIG_CMD_ONENAND)
-static const u32 gpmc_onenand[GPMC_MAX_REG] = {
- ONENAND_GPMC_CONFIG1,
- ONENAND_GPMC_CONFIG2,
- ONENAND_GPMC_CONFIG3,
- ONENAND_GPMC_CONFIG4,
- ONENAND_GPMC_CONFIG5,
- ONENAND_GPMC_CONFIG6, 0
-};
-
-#if defined(CONFIG_ENV_IS_IN_ONENAND)
-#define GPMC_CS 0
-#else
-#define GPMC_CS 1
-#endif
-
-#endif
-
-static struct sdrc *sdrc_base = (struct sdrc *)OMAP34XX_SDRC_BASE;
-
-/**************************************************************************
- * make_cs1_contiguous() - for es2 and above remap cs1 behind cs0 to allow
- * command line mem=xyz use all memory with out discontinuous support
- * compiled in. Could do it at the ATAG, but there really is two banks...
- * Called as part of 2nd phase DDR init.
- **************************************************************************/
-void make_cs1_contiguous(void)
-{
- u32 size, a_add_low, a_add_high;
-
- size = get_sdr_cs_size(CS0);
- size >>= 25; /* divide by 32 MiB to find size to offset CS1 */
- a_add_high = (size & 3) << 8; /* set up low field */
- a_add_low = (size & 0x3C) >> 2; /* set up high field */
- writel((a_add_high | a_add_low), &sdrc_base->cs_cfg);
-
-}
-
-/********************************************************
- * mem_ok() - test used to see if timings are correct
- * for a part. Helps in guessing which part
- * we are currently using.
- *******************************************************/
-u32 mem_ok(u32 cs)
-{
- u32 val1, val2, addr;
- u32 pattern = 0x12345678;
-
- addr = OMAP34XX_SDRC_CS0 + get_sdr_cs_offset(cs);
-
- writel(0x0, addr + 0x400); /* clear pos A */
- writel(pattern, addr); /* pattern to pos B */
- writel(0x0, addr + 4); /* remove pattern off the bus */
- val1 = readl(addr + 0x400); /* get pos A value */
- val2 = readl(addr); /* get val2 */
-
- if ((val1 != 0) || (val2 != pattern)) /* see if pos A val changed */
- return 0;
- else
- return 1;
-}
-
-/********************************************************
- * sdrc_init() - init the sdrc chip selects CS0 and CS1
- * - early init routines, called from flash or
- * SRAM.
- *******************************************************/
-void sdrc_init(void)
-{
- /* only init up first bank here */
- do_sdrc_init(CS0, EARLY_INIT);
-}
-
-/*************************************************************************
- * do_sdrc_init(): initialize the SDRAM for use.
- * -code sets up SDRAM basic SDRC timings for CS0
- * -optimal settings can be placed here, or redone after i2c
- * inspection of board info
- *
- * - code called once in C-Stack only context for CS0 and a possible 2nd
- * time depending on memory configuration from stack+global context
- **************************************************************************/
-
-void do_sdrc_init(u32 cs, u32 early)
-{
- struct sdrc_actim *sdrc_actim_base;
-
- if(cs)
- sdrc_actim_base = (struct sdrc_actim *)SDRC_ACTIM_CTRL1_BASE;
- else
- sdrc_actim_base = (struct sdrc_actim *)SDRC_ACTIM_CTRL0_BASE;
-
- if (early) {
- /* reset sdrc controller */
- writel(SOFTRESET, &sdrc_base->sysconfig);
- wait_on_value(RESETDONE, RESETDONE, &sdrc_base->status,
- 12000000);
- writel(0, &sdrc_base->sysconfig);
-
- /* setup sdrc to ball mux */
- writel(SDRC_SHARING, &sdrc_base->sharing);
-
- /* Disable Power Down of CKE cuz of 1 CKE on combo part */
- writel(WAKEUPPROC | PWDNEN | SRFRONRESET | PAGEPOLICY_HIGH,
- &sdrc_base->power);
-
- writel(ENADLL | DLLPHASE_90, &sdrc_base->dlla_ctrl);
- sdelay(0x20000);
- }
-
- writel(RASWIDTH_13BITS | CASWIDTH_10BITS | ADDRMUXLEGACY |
- RAMSIZE_128 | BANKALLOCATION | B32NOT16 | B32NOT16 |
- DEEPPD | DDR_SDRAM, &sdrc_base->cs[cs].mcfg);
- writel(ARCV | ARE_ARCV_1, &sdrc_base->cs[cs].rfr_ctrl);
- writel(V_ACTIMA_165, &sdrc_actim_base->ctrla);
- writel(V_ACTIMB_165, &sdrc_actim_base->ctrlb);
-
- writel(CMD_NOP, &sdrc_base ->cs[cs].manual);
- writel(CMD_PRECHARGE, &sdrc_base->cs[cs].manual);
- writel(CMD_AUTOREFRESH, &sdrc_base->cs[cs].manual);
- writel(CMD_AUTOREFRESH, &sdrc_base->cs[cs].manual);
-
- /*
- * CAS latency 3, Write Burst = Read Burst, Serial Mode,
- * Burst length = 4
- */
- writel(CASL3 | BURSTLENGTH4, &sdrc_base->cs[cs].mr);
-
- if (!mem_ok(cs))
- writel(0, &sdrc_base->cs[cs].mcfg);
-}
-
-void enable_gpmc_cs_config(const u32 *gpmc_config, struct gpmc_cs *cs, u32 base,
- u32 size)
-{
- writel(0, &cs->config7);
- sdelay(1000);
- /* Delay for settling */
- writel(gpmc_config[0], &cs->config1);
- writel(gpmc_config[1], &cs->config2);
- writel(gpmc_config[2], &cs->config3);
- writel(gpmc_config[3], &cs->config4);
- writel(gpmc_config[4], &cs->config5);
- writel(gpmc_config[5], &cs->config6);
- /* Enable the config */
- writel((((size & 0xF) << 8) | ((base >> 24) & 0x3F) |
- (1 << 6)), &cs->config7);
- sdelay(2000);
-}
-
-/*****************************************************
- * gpmc_init(): init gpmc bus
- * Init GPMC for x16, MuxMode (SDRAM in x32).
- * This code can only be executed from SRAM or SDRAM.
- *****************************************************/
-void gpmc_init(void)
-{
- /* putting a blanket check on GPMC based on ZeBu for now */
- gpmc_cfg = (struct gpmc *)GPMC_BASE;
-#if defined(CONFIG_CMD_NAND) || defined(CONFIG_CMD_ONENAND)
- const u32 *gpmc_config = NULL;
- u32 base = 0;
- u32 size = 0;
-#if defined(CONFIG_ENV_IS_IN_NAND) || defined(CONFIG_ENV_IS_IN_ONENAND)
- u32 f_off = CONFIG_SYS_MONITOR_LEN;
- u32 f_sec = 0;
-#endif
-#endif
- u32 config = 0;
-
- /* global settings */
- writel(0, &gpmc_cfg->irqenable); /* isr's sources masked */
- writel(0, &gpmc_cfg->timeout_control);/* timeout disable */
-
- config = readl(&gpmc_cfg->config);
- config &= (~0xf00);
- writel(config, &gpmc_cfg->config);
-
- /*
- * Disable the GPMC0 config set by ROM code
- * It conflicts with our MPDB (both at 0x08000000)
- */
- writel(0, &gpmc_cfg->cs[0].config7);
- sdelay(1000);
-
-#if defined(CONFIG_CMD_NAND) /* CS 0 */
- gpmc_config = gpmc_m_nand;
-
- base = PISMO1_NAND_BASE;
- size = PISMO1_NAND_SIZE;
- enable_gpmc_cs_config(gpmc_config, &gpmc_cfg->cs[0], base, size);
-#if defined(CONFIG_ENV_IS_IN_NAND)
- f_off = SMNAND_ENV_OFFSET;
- f_sec = (128 << 10); /* 128 KiB */
- /* env setup */
- boot_flash_base = base;
- boot_flash_off = f_off;
- boot_flash_sec = f_sec;
- boot_flash_env_addr = f_off;
-#endif
-#endif
-
-#if defined(CONFIG_CMD_ONENAND)
- gpmc_config = gpmc_onenand;
- base = PISMO1_ONEN_BASE;
- size = PISMO1_ONEN_SIZE;
- enable_gpmc_cs_config(gpmc_config, &gpmc_cfg->cs[0], base, size);
-#if defined(CONFIG_ENV_IS_IN_ONENAND)
- f_off = ONENAND_ENV_OFFSET;
- f_sec = (128 << 10); /* 128 KiB */
- /* env setup */
- boot_flash_base = base;
- boot_flash_off = f_off;
- boot_flash_sec = f_sec;
- boot_flash_env_addr = f_off;
-#endif
-#endif
-}
generated by cgit v1.2.3 (git 2.0.4) at 2024-07-07 05:37:15 +0000