summaryrefslogtreecommitdiff
path: root/cpu/arm1136
diff options
context:
space:
mode:
Diffstat (limited to 'cpu/arm1136')
-rw-r--r--cpu/arm1136/cpu.c2
-rw-r--r--cpu/arm1136/mx31/interrupts.c10
-rw-r--r--cpu/arm1136/mx31/serial.c12
-rw-r--r--cpu/arm1136/omap24xx/interrupts.c18
-rw-r--r--cpu/arm1136/start.S16
5 files changed, 29 insertions, 29 deletions
diff --git a/cpu/arm1136/cpu.c b/cpu/arm1136/cpu.c
index c27f8cd58c..04861632e1 100644
--- a/cpu/arm1136/cpu.c
+++ b/cpu/arm1136/cpu.c
@@ -89,7 +89,7 @@ int cpu_init (void)
* setup up stacks if necessary
*/
#ifdef CONFIG_USE_IRQ
- IRQ_STACK_START = _armboot_start - CFG_MALLOC_LEN - CFG_GBL_DATA_SIZE - 4;
+ IRQ_STACK_START = _armboot_start - CONFIG_SYS_MALLOC_LEN - CONFIG_SYS_GBL_DATA_SIZE - 4;
FIQ_STACK_START = IRQ_STACK_START - CONFIG_STACKSIZE_IRQ;
#endif
return 0;
diff --git a/cpu/arm1136/mx31/interrupts.c b/cpu/arm1136/mx31/interrupts.c
index cd57071ec6..b36c58c6ac 100644
--- a/cpu/arm1136/mx31/interrupts.c
+++ b/cpu/arm1136/mx31/interrupts.c
@@ -38,16 +38,16 @@
#define GPTCR_CLKSOURCE_32 (4 << 6) /* Clock source */
#define GPTCR_TEN 1 /* Timer enable */
-/* "time" is measured in 1 / CFG_HZ seconds, "tick" is internal timer period */
+/* "time" is measured in 1 / CONFIG_SYS_HZ seconds, "tick" is internal timer period */
#ifdef CONFIG_MX31_TIMER_HIGH_PRECISION
/* ~0.4% error - measured with stop-watch on 100s boot-delay */
-#define TICK_TO_TIME(t) ((t) * CFG_HZ / CONFIG_MX31_CLK32)
-#define TIME_TO_TICK(t) ((unsigned long long)(t) * CONFIG_MX31_CLK32 / CFG_HZ)
+#define TICK_TO_TIME(t) ((t) * CONFIG_SYS_HZ / CONFIG_MX31_CLK32)
+#define TIME_TO_TICK(t) ((unsigned long long)(t) * CONFIG_MX31_CLK32 / CONFIG_SYS_HZ)
#define US_TO_TICK(t) (((unsigned long long)(t) * CONFIG_MX31_CLK32 + \
999999) / 1000000)
#else
/* ~2% error */
-#define TICK_PER_TIME ((CONFIG_MX31_CLK32 + CFG_HZ / 2) / CFG_HZ)
+#define TICK_PER_TIME ((CONFIG_MX31_CLK32 + CONFIG_SYS_HZ / 2) / CONFIG_SYS_HZ)
#define US_PER_TICK (1000000 / CONFIG_MX31_CLK32)
#define TICK_TO_TIME(t) ((t) / TICK_PER_TIME)
#define TIME_TO_TICK(t) ((unsigned long long)(t) * TICK_PER_TIME)
@@ -104,7 +104,7 @@ ulong get_timer_masked (void)
/*
* get_ticks() returns a long long (64 bit), it wraps in
* 2^64 / CONFIG_MX31_CLK32 = 2^64 / 2^15 = 2^49 ~ 5 * 10^14 (s) ~
- * 5 * 10^9 days... and get_ticks() * CFG_HZ wraps in
+ * 5 * 10^9 days... and get_ticks() * CONFIG_SYS_HZ wraps in
* 5 * 10^6 days - long enough.
*/
return TICK_TO_TIME(get_ticks());
diff --git a/cpu/arm1136/mx31/serial.c b/cpu/arm1136/mx31/serial.c
index f498599419..e025e941d9 100644
--- a/cpu/arm1136/mx31/serial.c
+++ b/cpu/arm1136/mx31/serial.c
@@ -25,18 +25,18 @@
#define __REG(x) (*((volatile u32 *)(x)))
-#ifdef CFG_MX31_UART1
+#ifdef CONFIG_SYS_MX31_UART1
#define UART_PHYS 0x43f90000
-#elif defined(CFG_MX31_UART2)
+#elif defined(CONFIG_SYS_MX31_UART2)
#define UART_PHYS 0x43f94000
-#elif defined(CFG_MX31_UART3)
+#elif defined(CONFIG_SYS_MX31_UART3)
#define UART_PHYS 0x5000c000
-#elif defined(CFG_MX31_UART4)
+#elif defined(CONFIG_SYS_MX31_UART4)
#define UART_PHYS 0x43fb0000
-#elif defined(CFG_MX31_UART5)
+#elif defined(CONFIG_SYS_MX31_UART5)
#define UART_PHYS 0x43fb4000
#else
-#error "define CFG_MX31_UARTx to use the mx31 UART driver"
+#error "define CONFIG_SYS_MX31_UARTx to use the mx31 UART driver"
#endif
/* Register definitions */
diff --git a/cpu/arm1136/omap24xx/interrupts.c b/cpu/arm1136/omap24xx/interrupts.c
index b9a8b93521..fb02a49be7 100644
--- a/cpu/arm1136/omap24xx/interrupts.c
+++ b/cpu/arm1136/omap24xx/interrupts.c
@@ -37,7 +37,7 @@
#define TIMER_LOAD_VAL 0
/* macro to read the 32 bit timer */
-#define READ_TIMER (*((volatile ulong *)(CFG_TIMERBASE+TCRR)))
+#define READ_TIMER (*((volatile ulong *)(CONFIG_SYS_TIMERBASE+TCRR)))
static ulong timestamp;
static ulong lastinc;
@@ -48,9 +48,9 @@ int interrupt_init (void)
int32_t val;
/* Start the counter ticking up */
- *((int32_t *) (CFG_TIMERBASE + TLDR)) = TIMER_LOAD_VAL; /* reload value on overflow*/
- val = (CFG_PVT << 2) | BIT5 | BIT1 | BIT0; /* mask to enable timer*/
- *((int32_t *) (CFG_TIMERBASE + TCLR)) = val; /* start timer */
+ *((int32_t *) (CONFIG_SYS_TIMERBASE + TLDR)) = TIMER_LOAD_VAL; /* reload value on overflow*/
+ val = (CONFIG_SYS_PVT << 2) | BIT5 | BIT1 | BIT0; /* mask to enable timer*/
+ *((int32_t *) (CONFIG_SYS_TIMERBASE + TCLR)) = val; /* start timer */
reset_timer_masked(); /* init the timestamp and lastinc value */
@@ -81,10 +81,10 @@ void udelay (unsigned long usec)
if (usec >= 1000) { /* if "big" number, spread normalization to seconds */
tmo = usec / 1000; /* start to normalize for usec to ticks per sec */
- tmo *= CFG_HZ; /* find number of "ticks" to wait to achieve target */
+ tmo *= CONFIG_SYS_HZ; /* find number of "ticks" to wait to achieve target */
tmo /= 1000; /* finish normalize. */
} else { /* else small number, don't kill it prior to HZ multiply */
- tmo = usec * CFG_HZ;
+ tmo = usec * CONFIG_SYS_HZ;
tmo /= (1000*1000);
}
@@ -125,10 +125,10 @@ void udelay_masked (unsigned long usec)
if (usec >= 1000) { /* if "big" number, spread normalization to seconds */
tmo = usec / 1000; /* start to normalize for usec to ticks per sec */
- tmo *= CFG_HZ; /* find number of "ticks" to wait to achieve target */
+ tmo *= CONFIG_SYS_HZ; /* find number of "ticks" to wait to achieve target */
tmo /= 1000; /* finish normalize. */
} else { /* else small number, don't kill it prior to HZ multiply */
- tmo = usec * CFG_HZ;
+ tmo = usec * CONFIG_SYS_HZ;
tmo /= (1000*1000);
}
endtime = get_timer_masked () + tmo;
@@ -154,6 +154,6 @@ unsigned long long get_ticks(void)
ulong get_tbclk (void)
{
ulong tbclk;
- tbclk = CFG_HZ;
+ tbclk = CONFIG_SYS_HZ;
return tbclk;
}
diff --git a/cpu/arm1136/start.S b/cpu/arm1136/start.S
index 51b664d935..e6223388d9 100644
--- a/cpu/arm1136/start.S
+++ b/cpu/arm1136/start.S
@@ -178,8 +178,8 @@ stack_setup:
#ifdef CONFIG_ONENAND_IPL
sub sp, r0, #128 /* leave 32 words for abort-stack */
#else
- sub r0, r0, #CFG_MALLOC_LEN /* malloc area */
- sub r0, r0, #CFG_GBL_DATA_SIZE /* bdinfo */
+ sub r0, r0, #CONFIG_SYS_MALLOC_LEN /* malloc area */
+ sub r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo */
#ifdef CONFIG_USE_IRQ
sub r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ)
#endif
@@ -290,8 +290,8 @@ cpu_init_crit:
stmia sp, {r0 - r12} @ Save user registers (now in svc mode) r0-r12
ldr r2, _armboot_start
- sub r2, r2, #(CFG_MALLOC_LEN)
- sub r2, r2, #(CFG_GBL_DATA_SIZE+8) @ set base 2 words into abort stack
+ sub r2, r2, #(CONFIG_SYS_MALLOC_LEN)
+ sub r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ set base 2 words into abort stack
ldmia r2, {r2 - r3} @ get values for "aborted" pc and cpsr (into parm regs)
add r0, sp, #S_FRAME_SIZE @ grab pointer to old stack
@@ -323,8 +323,8 @@ cpu_init_crit:
.macro get_bad_stack
ldr r13, _armboot_start @ setup our mode stack (enter in banked mode)
- sub r13, r13, #(CFG_MALLOC_LEN) @ move past malloc pool
- sub r13, r13, #(CFG_GBL_DATA_SIZE+8) @ move to reserved a couple spots for abort stack
+ sub r13, r13, #(CONFIG_SYS_MALLOC_LEN) @ move past malloc pool
+ sub r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ move to reserved a couple spots for abort stack
str lr, [r13] @ save caller lr in position 0 of saved stack
mrs lr, spsr @ get the spsr
@@ -341,8 +341,8 @@ cpu_init_crit:
sub r13, r13, #4 @ space on current stack for scratch reg.
str r0, [r13] @ save R0's value.
ldr r0, _armboot_start @ get data regions start
- sub r0, r0, #(CFG_MALLOC_LEN) @ move past malloc pool
- sub r0, r0, #(CFG_GBL_DATA_SIZE+8) @ move past gbl and a couple spots for abort stack
+ sub r0, r0, #(CONFIG_SYS_MALLOC_LEN) @ move past malloc pool
+ sub r0, r0, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ move past gbl and a couple spots for abort stack
str lr, [r0] @ save caller lr in position 0 of saved stack
mrs r0, spsr @ get the spsr
str lr, [r0, #4] @ save spsr in position 1 of saved stack