summaryrefslogtreecommitdiff
path: root/common
diff options
context:
space:
mode:
Diffstat (limited to 'common')
-rw-r--r--common/cmd_ambapp.c7
-rw-r--r--common/cmd_bdinfo.c2
-rw-r--r--common/cmd_bedbug.c16
-rw-r--r--common/cmd_bmp.c2
-rw-r--r--common/cmd_boot.c4
-rw-r--r--common/cmd_bootldr.c3
-rw-r--r--common/cmd_bootm.c10
-rw-r--r--common/cmd_cache.c4
-rw-r--r--common/cmd_cplbinfo.c4
-rw-r--r--common/cmd_dataflash_mmc_mux.c2
-rw-r--r--common/cmd_date.c2
-rw-r--r--common/cmd_dcr.c8
-rw-r--r--common/cmd_df.c2
-rw-r--r--common/cmd_diag.c2
-rw-r--r--common/cmd_display.c2
-rw-r--r--common/cmd_doc.c4
-rw-r--r--common/cmd_dtt.c4
-rw-r--r--common/cmd_eeprom.c4
-rw-r--r--common/cmd_elf.c4
-rw-r--r--common/cmd_ext2.c4
-rw-r--r--common/cmd_fat.c6
-rw-r--r--common/cmd_fdc.c2
-rw-r--r--common/cmd_fdos.c4
-rw-r--r--common/cmd_fdt.c2
-rw-r--r--common/cmd_flash.c6
-rw-r--r--common/cmd_fpga.c5
-rw-r--r--common/cmd_i2c.c5
-rw-r--r--common/cmd_ide.c4
-rw-r--r--common/cmd_immap.c33
-rw-r--r--common/cmd_irq.c3
-rw-r--r--common/cmd_itest.c2
-rw-r--r--common/cmd_jffs2.c7
-rw-r--r--common/cmd_license.c5
-rw-r--r--common/cmd_load.c16
-rw-r--r--common/cmd_log.c2
-rw-r--r--common/cmd_mac.c18
-rw-r--r--common/cmd_mem.c37
-rw-r--r--common/cmd_mfsl.c7
-rw-r--r--common/cmd_mgdisk.c2
-rw-r--r--common/cmd_mii.c2
-rw-r--r--common/cmd_misc.c4
-rw-r--r--common/cmd_mmc.c11
-rw-r--r--common/cmd_mp.c7
-rw-r--r--common/cmd_mtdparts.c4
-rw-r--r--common/cmd_nand.c45
-rw-r--r--common/cmd_net.c12
-rw-r--r--common/cmd_nvedit.c10
-rw-r--r--common/cmd_onenand.c2
-rw-r--r--common/cmd_otp.c3
-rw-r--r--common/cmd_pci.c2
-rw-r--r--common/cmd_pcmcia.c4
-rw-r--r--common/cmd_portio.c4
-rw-r--r--common/cmd_reginfo.c1
-rw-r--r--common/cmd_reiser.c4
-rw-r--r--common/cmd_sata.c3
-rw-r--r--common/cmd_scsi.c4
-rw-r--r--common/cmd_setexpr.c2
-rw-r--r--common/cmd_sf.c3
-rw-r--r--common/cmd_source.c7
-rw-r--r--common/cmd_spi.c2
-rw-r--r--common/cmd_strings.c3
-rw-r--r--common/cmd_ubi.c2
-rw-r--r--common/cmd_ubifs.c17
-rw-r--r--common/cmd_universe.c2
-rw-r--r--common/cmd_usb.c6
-rw-r--r--common/cmd_vfd.c2
-rw-r--r--common/cmd_ximg.c11
-rw-r--r--common/cmd_yaffs2.c24
-rw-r--r--common/command.c15
-rw-r--r--common/hush.c2
-rw-r--r--common/lcd.c2
71 files changed, 237 insertions, 241 deletions
diff --git a/common/cmd_ambapp.c b/common/cmd_ambapp.c
index 06531f12b32..bb20ab5149d 100644
--- a/common/cmd_ambapp.c
+++ b/common/cmd_ambapp.c
@@ -273,6 +273,7 @@ int ambapp_init_reloc(void)
}
U_BOOT_CMD(ambapp, 1, 1, do_ambapp_print,
- "list AMBA Plug&Play information",
- "ambapp\n"
- " - lists AMBA (AHB & APB) Plug&Play devices present on the system\n");
+ "list AMBA Plug&Play information",
+ "ambapp\n"
+ " - lists AMBA (AHB & APB) Plug&Play devices present on the system"
+);
diff --git a/common/cmd_bdinfo.c b/common/cmd_bdinfo.c
index b230924ee7d..11c154731e3 100644
--- a/common/cmd_bdinfo.c
+++ b/common/cmd_bdinfo.c
@@ -384,5 +384,5 @@ static void print_str(const char *name, const char *str)
U_BOOT_CMD(
bdinfo, 1, 1, do_bdinfo,
"print Board Info structure",
- NULL
+ ""
);
diff --git a/common/cmd_bedbug.c b/common/cmd_bedbug.c
index cd9e720fc62..8be1c25fd7a 100644
--- a/common/cmd_bedbug.c
+++ b/common/cmd_bedbug.c
@@ -108,7 +108,7 @@ int do_bedbug_dis (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD (ds, 3, 1, do_bedbug_dis,
"disassemble memory",
- "ds <address> [# instructions]\n");
+ "ds <address> [# instructions]");
/* ======================================================================
* Entry point from the interpreter to the assembler. Assembles
@@ -160,7 +160,7 @@ int do_bedbug_asm (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
} /* do_bedbug_asm */
U_BOOT_CMD (as, 2, 0, do_bedbug_asm,
- "assemble memory", "as <address>\n");
+ "assemble memory", "as <address>");
/* ======================================================================
* Used to set a break point from the interpreter. Simply calls into the
@@ -181,7 +181,7 @@ U_BOOT_CMD (break, 3, 0, do_bedbug_break,
" - Set or clear a breakpoint\n"
"break <address> - Break at an address\n"
"break off <bp#> - Disable breakpoint.\n"
- "break show - List breakpoints.\n");
+ "break show - List breakpoints.");
/* ======================================================================
* Called from the debug interrupt routine. Simply calls the CPU-specific
@@ -278,7 +278,7 @@ int do_bedbug_continue (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD (continue, 1, 0, do_bedbug_continue,
"continue from a breakpoint",
- " - continue from a breakpoint.\n");
+ "");
/* ======================================================================
* Interpreter command to continue to the next instruction, stepping into
@@ -309,7 +309,7 @@ int do_bedbug_step (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD (step, 1, 1, do_bedbug_step,
"single step execution.",
- " - single step execution.\n");
+ "");
/* ======================================================================
* Interpreter command to continue to the next instruction, stepping over
@@ -340,7 +340,7 @@ int do_bedbug_next (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD (next, 1, 1, do_bedbug_next,
"single step execution, stepping over subroutines.",
- " - single step execution, stepping over subroutines.\n");
+ "");
/* ======================================================================
* Interpreter command to print the current stack. This assumes an EABI
@@ -385,7 +385,7 @@ int do_bedbug_stack (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD (where, 1, 1, do_bedbug_stack,
"Print the running stack.",
- " - Print the running stack.\n");
+ "");
/* ======================================================================
* Interpreter command to dump the registers. Calls the CPU-specific
@@ -405,7 +405,7 @@ int do_bedbug_rdump (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
} /* do_bedbug_rdump */
U_BOOT_CMD (rdump, 1, 1, do_bedbug_rdump,
- "Show registers.", " - Show registers.\n");
+ "Show registers.", "");
/* ====================================================================== */
diff --git a/common/cmd_bmp.c b/common/cmd_bmp.c
index abbb0704fbe..fc8462ead19 100644
--- a/common/cmd_bmp.c
+++ b/common/cmd_bmp.c
@@ -141,7 +141,7 @@ U_BOOT_CMD(
bmp, 5, 1, do_bmp,
"manipulate BMP image data",
"info <imageAddr> - display image info\n"
- "bmp display <imageAddr> [x y] - display image at x,y\n"
+ "bmp display <imageAddr> [x y] - display image at x,y"
);
/*
diff --git a/common/cmd_boot.c b/common/cmd_boot.c
index efc1a0262f0..bfc1db21d23 100644
--- a/common/cmd_boot.c
+++ b/common/cmd_boot.c
@@ -66,7 +66,7 @@ U_BOOT_CMD(
go, CONFIG_SYS_MAXARGS, 1, do_go,
"start application at address 'addr'",
"addr [arg ...]\n - start application at address 'addr'\n"
- " passing 'arg' as arguments\n"
+ " passing 'arg' as arguments"
);
extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
@@ -74,5 +74,5 @@ extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
U_BOOT_CMD(
reset, 1, 0, do_reset,
"Perform RESET of the CPU",
- NULL
+ ""
);
diff --git a/common/cmd_bootldr.c b/common/cmd_bootldr.c
index 48d113f1f12..b2a8b0e190b 100644
--- a/common/cmd_bootldr.c
+++ b/common/cmd_bootldr.c
@@ -170,4 +170,5 @@ int do_bootldr(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(bootldr, 2, 0, do_bootldr,
"boot ldr image from memory",
"[addr]\n"
- " - boot ldr image stored in memory\n");
+ ""
+);
diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c
index bd1813ad422..367d5a7a94c 100644
--- a/common/cmd_bootm.c
+++ b/common/cmd_bootm.c
@@ -948,7 +948,7 @@ U_BOOT_CMD(
"\tbdt - OS specific bd_t processing\n"
"\tcmdline - OS specific command line processing/setup\n"
"\tprep - OS specific prep before relocation or go\n"
- "\tgo - start OS\n"
+ "\tgo - start OS"
);
/*******************************************************************/
@@ -973,14 +973,14 @@ int do_bootd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
boot, 1, 1, do_bootd,
"boot default, i.e., run 'bootcmd'",
- NULL
+ ""
);
/* keep old command name "bootd" for backward compatibility */
U_BOOT_CMD(
bootd, 1, 1, do_bootd,
"boot default, i.e., run 'bootcmd'",
- NULL
+ ""
);
#endif
@@ -1068,7 +1068,7 @@ U_BOOT_CMD(
"addr [addr ...]\n"
" - print header information for application image starting at\n"
" address 'addr' in memory; this includes verification of the\n"
- " image contents (magic number, header and payload checksums)\n"
+ " image contents (magic number, header and payload checksums)"
);
#endif
@@ -1135,7 +1135,7 @@ U_BOOT_CMD(
"list all images found in flash",
"\n"
" - Prints information about all images found at sector\n"
- " boundaries in flash.\n"
+ " boundaries in flash."
);
#endif
diff --git a/common/cmd_cache.c b/common/cmd_cache.c
index c0f2cbaf674..0dfa3363bdd 100644
--- a/common/cmd_cache.c
+++ b/common/cmd_cache.c
@@ -99,14 +99,14 @@ U_BOOT_CMD(
icache, 2, 1, do_icache,
"enable or disable instruction cache",
"[on, off]\n"
- " - enable or disable instruction cache\n"
+ " - enable or disable instruction cache"
);
U_BOOT_CMD(
dcache, 2, 1, do_dcache,
"enable or disable data cache",
"[on, off]\n"
- " - enable or disable data (writethrough) cache\n"
+ " - enable or disable data (writethrough) cache"
);
#endif
diff --git a/common/cmd_cplbinfo.c b/common/cmd_cplbinfo.c
index 56e70d6155a..1a044d29018 100644
--- a/common/cmd_cplbinfo.c
+++ b/common/cmd_cplbinfo.c
@@ -55,5 +55,5 @@ int do_cplbinfo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(cplbinfo, 1, 0, do_cplbinfo,
"display current CPLB tables",
- "\n"
- " - display current CPLB tables\n");
+ ""
+);
diff --git a/common/cmd_dataflash_mmc_mux.c b/common/cmd_dataflash_mmc_mux.c
index 4b2cf1c2c2d..97e303e9431 100644
--- a/common/cmd_dataflash_mmc_mux.c
+++ b/common/cmd_dataflash_mmc_mux.c
@@ -61,5 +61,5 @@ U_BOOT_CMD(
dataflash_mmc_mux, 2, 1, do_dataflash_mmc_mux,
"dataflash_mmc_mux\t- enable or disable MMC or SPI\n",
"[mmc, spi]\n"
- " - enable or disable MMC or SPI\n"
+ " - enable or disable MMC or SPI"
);
diff --git a/common/cmd_date.c b/common/cmd_date.c
index 3d78be2696d..b69e9350858 100644
--- a/common/cmd_date.c
+++ b/common/cmd_date.c
@@ -218,5 +218,5 @@ U_BOOT_CMD(
"[MMDDhhmm[[CC]YY][.ss]]\ndate reset\n"
" - without arguments: print date & time\n"
" - with numeric argument: set the system date & time\n"
- " - with 'reset' argument: reset the RTC\n"
+ " - with 'reset' argument: reset the RTC"
);
diff --git a/common/cmd_dcr.c b/common/cmd_dcr.c
index 7aed06c1170..4f23b8d5911 100644
--- a/common/cmd_dcr.c
+++ b/common/cmd_dcr.c
@@ -224,22 +224,22 @@ int do_setidcr (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
getdcr, 2, 1, do_getdcr,
"Get an AMCC PPC 4xx DCR's value",
- "dcrn - return a DCR's value.\n"
+ "dcrn - return a DCR's value."
);
U_BOOT_CMD(
setdcr, 2, 1, do_setdcr,
"Set an AMCC PPC 4xx DCR's value",
- "dcrn - set a DCR's value.\n"
+ "dcrn - set a DCR's value."
);
U_BOOT_CMD(
getidcr, 3, 1, do_getidcr,
"Get a register value via indirect DCR addressing",
- "adr_dcrn[.dat_dcrn] offset - write offset to adr_dcrn, read value from dat_dcrn.\n"
+ "adr_dcrn[.dat_dcrn] offset - write offset to adr_dcrn, read value from dat_dcrn."
);
U_BOOT_CMD(
setidcr, 4, 1, do_setidcr,
"Set a register value via indirect DCR addressing",
- "adr_dcrn[.dat_dcrn] offset value - write offset to adr_dcrn, write value to dat_dcrn.\n"
+ "adr_dcrn[.dat_dcrn] offset value - write offset to adr_dcrn, write value to dat_dcrn."
);
diff --git a/common/cmd_df.c b/common/cmd_df.c
index d64f9009d73..7f957fed472 100644
--- a/common/cmd_df.c
+++ b/common/cmd_df.c
@@ -34,4 +34,4 @@ usage:
U_BOOT_CMD(
sf, 2, 1, do_serial_flash,
"Serial flash sub-system",
- "probe [bus:]cs - init flash device on given SPI bus and CS\n")
+ "probe [bus:]cs - init flash device on given SPI bus and CS")
diff --git a/common/cmd_diag.c b/common/cmd_diag.c
index c2a617547f1..0436c492f48 100644
--- a/common/cmd_diag.c
+++ b/common/cmd_diag.c
@@ -72,5 +72,5 @@ U_BOOT_CMD(
" - print information about specified tests\n"
"diag run - run all available tests\n"
"diag run [test1 [test2]]\n"
- " - run specified tests\n"
+ " - run specified tests"
);
diff --git a/common/cmd_display.c b/common/cmd_display.c
index 4102424d148..34223952ee6 100644
--- a/common/cmd_display.c
+++ b/common/cmd_display.c
@@ -74,5 +74,5 @@ U_BOOT_CMD(
"display string on dot matrix display",
"[<string>]\n"
" - with <string> argument: display <string> on dot matrix display\n"
- " - without arguments: clear dot matrix display\n"
+ " - without arguments: clear dot matrix display"
);
diff --git a/common/cmd_doc.c b/common/cmd_doc.c
index 3385c6736fb..5cc90f064d9 100644
--- a/common/cmd_doc.c
+++ b/common/cmd_doc.c
@@ -202,7 +202,7 @@ U_BOOT_CMD(
"doc write addr off size - read/write `size'"
" bytes starting at offset `off'\n"
" to/from memory address `addr'\n"
- "doc erase off size - erase `size' bytes of DOC from offset `off'\n"
+ "doc erase off size - erase `size' bytes of DOC from offset `off'"
);
int do_docboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
@@ -342,7 +342,7 @@ int do_docboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
docboot, 4, 1, do_docboot,
"boot from DOC device",
- "loadAddr dev\n"
+ "loadAddr dev"
);
int doc_rw (struct DiskOnChip* this, int cmd,
diff --git a/common/cmd_dtt.c b/common/cmd_dtt.c
index 7783c880ba4..3cfd36ef738 100644
--- a/common/cmd_dtt.c
+++ b/common/cmd_dtt.c
@@ -55,6 +55,6 @@ int do_dtt (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
dtt, 1, 1, do_dtt,
- "Digital Thermometer and Thermostat",
- " - Read temperature from digital thermometer and thermostat.\n"
+ "Read temperature from Digital Thermometer and Thermostat",
+ ""
);
diff --git a/common/cmd_eeprom.c b/common/cmd_eeprom.c
index f749087ebc7..102efaf5b66 100644
--- a/common/cmd_eeprom.c
+++ b/common/cmd_eeprom.c
@@ -424,7 +424,7 @@ U_BOOT_CMD(
"EEPROM sub-system",
"read devaddr addr off cnt\n"
"eeprom write devaddr addr off cnt\n"
- " - read/write `cnt' bytes from `devaddr` EEPROM at offset `off'\n"
+ " - read/write `cnt' bytes from `devaddr` EEPROM at offset `off'"
);
#else /* One EEPROM */
U_BOOT_CMD(
@@ -432,7 +432,7 @@ U_BOOT_CMD(
"EEPROM sub-system",
"read addr off cnt\n"
"eeprom write addr off cnt\n"
- " - read/write `cnt' bytes at EEPROM offset `off'\n"
+ " - read/write `cnt' bytes at EEPROM offset `off'"
);
#endif /* CONFIG_SYS_I2C_MULTI_EEPROMS */
diff --git a/common/cmd_elf.c b/common/cmd_elf.c
index 83e758999a6..abec7ddc9a5 100644
--- a/common/cmd_elf.c
+++ b/common/cmd_elf.c
@@ -313,11 +313,11 @@ unsigned long load_elf_image (unsigned long addr)
U_BOOT_CMD(
bootelf, 2, 0, do_bootelf,
"Boot from an ELF image in memory",
- " [address] - load address of ELF image.\n"
+ " [address] - load address of ELF image."
);
U_BOOT_CMD(
bootvx, 2, 0, do_bootvx,
"Boot vxWorks from an ELF image",
- " [address] - load address of vxWorks ELF image.\n"
+ " [address] - load address of vxWorks ELF image."
);
diff --git a/common/cmd_ext2.c b/common/cmd_ext2.c
index 923b355673d..6ee60c66f21 100644
--- a/common/cmd_ext2.c
+++ b/common/cmd_ext2.c
@@ -118,7 +118,7 @@ U_BOOT_CMD(
ext2ls, 4, 1, do_ext2ls,
"list files in a directory (default /)",
"<interface> <dev[:part]> [directory]\n"
- " - list files from 'dev' on 'interface' in a 'directory'\n"
+ " - list files from 'dev' on 'interface' in a 'directory'"
);
/******************************************************************************
@@ -256,5 +256,5 @@ U_BOOT_CMD(
"load binary file from a Ext2 filesystem",
"<interface> <dev[:part]> [addr] [filename] [bytes]\n"
" - load binary file 'filename' from 'dev' on 'interface'\n"
- " to address 'addr' from ext2 filesystem\n"
+ " to address 'addr' from ext2 filesystem"
);
diff --git a/common/cmd_fat.c b/common/cmd_fat.c
index 4a26b8072ec..f3089a296e0 100644
--- a/common/cmd_fat.c
+++ b/common/cmd_fat.c
@@ -91,7 +91,7 @@ U_BOOT_CMD(
"load binary file from a dos filesystem",
"<interface> <dev[:part]> <addr> <filename> [bytes]\n"
" - load binary file 'filename' from 'dev' on 'interface'\n"
- " to address 'addr' from dos filesystem\n"
+ " to address 'addr' from dos filesystem"
);
int do_fat_ls (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
@@ -138,7 +138,7 @@ U_BOOT_CMD(
fatls, 4, 1, do_fat_ls,
"list files in a directory (default /)",
"<interface> <dev[:part]> [directory]\n"
- " - list files from 'dev' on 'interface' in a 'directory'\n"
+ " - list files from 'dev' on 'interface' in a 'directory'"
);
int do_fat_fsinfo (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
@@ -176,7 +176,7 @@ U_BOOT_CMD(
fatinfo, 3, 1, do_fat_fsinfo,
"print information about filesystem",
"<interface> <dev[:part]>\n"
- " - print information about filesystem from 'dev' on 'interface'\n"
+ " - print information about filesystem from 'dev' on 'interface'"
);
#ifdef NOT_IMPLEMENTED_YET
diff --git a/common/cmd_fdc.c b/common/cmd_fdc.c
index c043b976500..8e18c71bf40 100644
--- a/common/cmd_fdc.c
+++ b/common/cmd_fdc.c
@@ -903,6 +903,6 @@ int do_fdcboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
fdcboot, 3, 1, do_fdcboot,
"boot from floppy device",
- "loadAddr drive\n"
+ "loadAddr drive"
);
#endif
diff --git a/common/cmd_fdos.c b/common/cmd_fdos.c
index bcf98d9e4b9..3cc658624d6 100644
--- a/common/cmd_fdos.c
+++ b/common/cmd_fdos.c
@@ -143,11 +143,11 @@ int do_fdosls(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
fdosboot, 3, 0, do_fdosboot,
"boot from a dos floppy file",
- "[loadAddr] [filename]\n"
+ "[loadAddr] [filename]"
);
U_BOOT_CMD(
fdosls, 2, 0, do_fdosls,
"list files in a directory",
- "[directory]\n"
+ "[directory]"
);
diff --git a/common/cmd_fdt.c b/common/cmd_fdt.c
index 0947b72d20c..86837723b55 100644
--- a/common/cmd_fdt.c
+++ b/common/cmd_fdt.c
@@ -840,5 +840,5 @@ U_BOOT_CMD(
"fdt chosen [<start> <end>] - Add/update the /chosen branch in the tree\n"
" <start>/<end> - initrd start/end addr\n"
"NOTE: Dereference aliases by omiting the leading '/', "
- "e.g. fdt print ethernet0.\n"
+ "e.g. fdt print ethernet0."
);
diff --git a/common/cmd_flash.c b/common/cmd_flash.c
index f1f3517b12f..9f27ab0dd94 100644
--- a/common/cmd_flash.c
+++ b/common/cmd_flash.c
@@ -712,7 +712,7 @@ U_BOOT_CMD(
flinfo, 2, 1, do_flinfo,
"print FLASH memory information",
"\n - print information for all FLASH memory banks\n"
- "flinfo N\n - print information for FLASH memory bank # N\n"
+ "flinfo N\n - print information for FLASH memory bank # N"
);
U_BOOT_CMD(
@@ -726,7 +726,7 @@ U_BOOT_CMD(
"erase N:SF[-SL]\n - erase sectors SF-SL in FLASH bank # N\n"
"erase bank N\n - erase FLASH bank # N\n"
TMP_ERASE
- "erase all\n - erase all FLASH banks\n"
+ "erase all\n - erase all FLASH banks"
);
U_BOOT_CMD(
@@ -751,7 +751,7 @@ U_BOOT_CMD(
" - make sectors SF-SL writable in FLASH bank # N\n"
"protect off bank N\n - make FLASH bank # N writable\n"
TMP_PROT_OFF
- "protect off all\n - make all FLASH banks writable\n"
+ "protect off all\n - make all FLASH banks writable"
);
#undef TMP_ERASE
diff --git a/common/cmd_fpga.c b/common/cmd_fpga.c
index 362bffdcd57..2e017b84d89 100644
--- a/common/cmd_fpga.c
+++ b/common/cmd_fpga.c
@@ -357,9 +357,10 @@ U_BOOT_CMD (fpga, 6, 1, do_fpga,
"\tload\tLoad device from memory buffer\n"
"\tloadb\tLoad device from bitstream buffer (Xilinx devices only)\n"
"\tloadmk\tLoad device generated with mkimage\n"
- "\tdump\tLoad device to memory buffer\n"
+ "\tdump\tLoad device to memory buffer"
#if defined(CONFIG_FIT)
+ "\n"
"\tFor loadmk operating on FIT format uImage address must include\n"
- "\tsubimage unit name in the form of addr:<subimg_uname>\n"
+ "\tsubimage unit name in the form of addr:<subimg_uname>"
#endif
);
diff --git a/common/cmd_i2c.c b/common/cmd_i2c.c
index b922b966afa..ae26845161e 100644
--- a/common/cmd_i2c.c
+++ b/common/cmd_i2c.c
@@ -1315,9 +1315,10 @@ U_BOOT_CMD(
"i2c crc32 chip address[.0, .1, .2] count - compute CRC32 checksum\n"
"i2c probe - show devices on the I2C bus\n"
"i2c reset - re-init the I2C Controller\n"
- "i2c loop chip address[.0, .1, .2] [# of objects] - looping read of device\n"
+ "i2c loop chip address[.0, .1, .2] [# of objects] - looping read of device"
#if defined(CONFIG_CMD_SDRAM)
- "i2c sdram chip - print SDRAM configuration information\n"
+ "\n"
+ "i2c sdram chip - print SDRAM configuration information"
#endif
);
diff --git a/common/cmd_ide.c b/common/cmd_ide.c
index d86bf370302..feda773beef 100644
--- a/common/cmd_ide.c
+++ b/common/cmd_ide.c
@@ -2108,11 +2108,11 @@ U_BOOT_CMD(
"ide read addr blk# cnt\n"
"ide write addr blk# cnt - read/write `cnt'"
" blocks starting at block `blk#'\n"
- " to/from memory address `addr'\n"
+ " to/from memory address `addr'"
);
U_BOOT_CMD(
diskboot, 3, 1, do_diskboot,
"boot from IDE device",
- "loadAddr dev:part\n"
+ "loadAddr dev:part"
);
diff --git a/common/cmd_immap.c b/common/cmd_immap.c
index c8367f0fb37..37e60582f60 100644
--- a/common/cmd_immap.c
+++ b/common/cmd_immap.c
@@ -615,39 +615,39 @@ do_mccinfo (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
siuinfo, 1, 1, do_siuinfo,
"print System Interface Unit (SIU) registers",
- NULL
+ ""
);
U_BOOT_CMD(
memcinfo, 1, 1, do_memcinfo,
"print Memory Controller registers",
- NULL
+ ""
);
U_BOOT_CMD(
sitinfo, 1, 1, do_sitinfo,
"print System Integration Timers (SIT) registers",
- NULL
+ ""
);
#ifdef CONFIG_8260
U_BOOT_CMD(
icinfo, 1, 1, do_icinfo,
"print Interrupt Controller registers",
- NULL
+ ""
);
#endif
U_BOOT_CMD(
carinfo, 1, 1, do_carinfo,
"print Clocks and Reset registers",
- NULL
+ ""
);
U_BOOT_CMD(
iopinfo, 1, 1, do_iopinfo,
"print I/O Port registers",
- NULL
+ ""
);
U_BOOT_CMD(
@@ -659,62 +659,61 @@ U_BOOT_CMD(
U_BOOT_CMD(
dmainfo, 1, 1, do_dmainfo,
"print SDMA/IDMA registers",
- NULL
+ ""
);
U_BOOT_CMD(
fccinfo, 1, 1, do_fccinfo,
"print FCC registers",
- NULL
+ ""
);
U_BOOT_CMD(
brginfo, 1, 1, do_brginfo,
"print Baud Rate Generator (BRG) registers",
- NULL
+ ""
);
U_BOOT_CMD(
i2cinfo, 1, 1, do_i2cinfo,
"print I2C registers",
- NULL
+ ""
);
U_BOOT_CMD(
sccinfo, 1, 1, do_sccinfo,
"print SCC registers",
- NULL
+ ""
);
U_BOOT_CMD(
smcinfo, 1, 1, do_smcinfo,
"print SMC registers",
- NULL
+ ""
);
U_BOOT_CMD(
spiinfo, 1, 1, do_spiinfo,
"print Serial Peripheral Interface (SPI) registers",
- NULL
+ ""
);
U_BOOT_CMD(
muxinfo, 1, 1, do_muxinfo,
"print CPM Multiplexing registers",
- NULL
+ ""
);
U_BOOT_CMD(
siinfo, 1, 1, do_siinfo,
"print Serial Interface (SI) registers",
- NULL
+ ""
);
U_BOOT_CMD(
mccinfo, 1, 1, do_mccinfo,
"print MCC registers",
- NULL
+ ""
);
-
#endif
diff --git a/common/cmd_irq.c b/common/cmd_irq.c
index a21aedea40c..4604a5a31ef 100644
--- a/common/cmd_irq.c
+++ b/common/cmd_irq.c
@@ -45,6 +45,5 @@ int do_interrupts(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
interrupts, 5, 0, do_interrupts,
"enable or disable interrupts",
- "[on, off]\n"
- " - enable or disable interrupts\n"
+ "[on, off]"
);
diff --git a/common/cmd_itest.c b/common/cmd_itest.c
index 309b08bb03a..5b301bf5a52 100644
--- a/common/cmd_itest.c
+++ b/common/cmd_itest.c
@@ -191,5 +191,5 @@ int do_itest ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[] )
U_BOOT_CMD(
itest, 4, 0, do_itest,
"return true/false on integer compare",
- "[.b, .w, .l, .s] [*]value1 <op> [*]value2\n"
+ "[.b, .w, .l, .s] [*]value1 <op> [*]value2"
);
diff --git a/common/cmd_jffs2.c b/common/cmd_jffs2.c
index 3bb6c3cb158..4db4a83aa82 100644
--- a/common/cmd_jffs2.c
+++ b/common/cmd_jffs2.c
@@ -636,18 +636,17 @@ U_BOOT_CMD(
"load binary file from a filesystem image",
"[ off ] [ filename ]\n"
" - load binary file from flash bank\n"
- " with offset 'off'\n"
+ " with offset 'off'"
);
U_BOOT_CMD(
ls, 2, 1, do_jffs2_ls,
"list files in a directory (default /)",
- "[ directory ]\n"
- " - list files in a directory.\n"
+ "[ directory ]"
);
U_BOOT_CMD(
fsinfo, 1, 1, do_jffs2_fsinfo,
"print information about filesystems",
- " - print information about filesystems\n"
+ ""
);
/***************************************************/
diff --git a/common/cmd_license.c b/common/cmd_license.c
index c3c34967db0..141215b3a58 100644
--- a/common/cmd_license.c
+++ b/common/cmd_license.c
@@ -53,7 +53,8 @@ int do_license(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
}
U_BOOT_CMD(license, 1, 1, do_license,
- "print GPL license text",
- NULL);
+ "print GPL license text",
+ ""
+);
#endif /* CONFIG_CMD_LICENSE */
diff --git a/common/cmd_load.c b/common/cmd_load.c
index 2b5a66dd6fb..73fbf743c9b 100644
--- a/common/cmd_load.c
+++ b/common/cmd_load.c
@@ -1049,7 +1049,7 @@ U_BOOT_CMD(
"load S-Record file over serial line",
"[ off ] [ baud ]\n"
" - load S-Record file over serial line"
- " with offset 'off' and baudrate 'baud'\n"
+ " with offset 'off' and baudrate 'baud'"
);
#else /* ! CONFIG_SYS_LOADS_BAUD_CHANGE */
@@ -1057,7 +1057,7 @@ U_BOOT_CMD(
loads, 2, 0, do_load_serial,
"load S-Record file over serial line",
"[ off ]\n"
- " - load S-Record file over serial line with offset 'off'\n"
+ " - load S-Record file over serial line with offset 'off'"
);
#endif /* CONFIG_SYS_LOADS_BAUD_CHANGE */
@@ -1073,14 +1073,14 @@ U_BOOT_CMD(
"save S-Record file over serial line",
"[ off ] [size] [ baud ]\n"
" - save S-Record file over serial line"
- " with offset 'off', size 'size' and baudrate 'baud'\n"
+ " with offset 'off', size 'size' and baudrate 'baud'"
);
#else /* ! CONFIG_SYS_LOADS_BAUD_CHANGE */
U_BOOT_CMD(
saves, 3, 0, do_save_serial,
"save S-Record file over serial line",
"[ off ] [size]\n"
- " - save S-Record file over serial line with offset 'off' and size 'size'\n"
+ " - save S-Record file over serial line with offset 'off' and size 'size'"
);
#endif /* CONFIG_SYS_LOADS_BAUD_CHANGE */
#endif
@@ -1093,7 +1093,7 @@ U_BOOT_CMD(
"load binary file over serial line (kermit mode)",
"[ off ] [ baud ]\n"
" - load binary file over serial line"
- " with offset 'off' and baudrate 'baud'\n"
+ " with offset 'off' and baudrate 'baud'"
);
U_BOOT_CMD(
@@ -1101,7 +1101,7 @@ U_BOOT_CMD(
"load binary file over serial line (ymodem mode)",
"[ off ] [ baud ]\n"
" - load binary file over serial line"
- " with offset 'off' and baudrate 'baud'\n"
+ " with offset 'off' and baudrate 'baud'"
);
#endif
@@ -1130,8 +1130,8 @@ int do_hwflow (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
hwflow, 2, 0, do_hwflow,
- "turn the harwdare flow control on/off",
- "[on|off]\n - change RTS/CTS hardware flow control over serial line\n"
+ "turn RTS/CTS hardware flow control in serial line on/off",
+ "[on|off]"
);
#endif
diff --git a/common/cmd_log.c b/common/cmd_log.c
index a03835d0216..d422d9f9246 100644
--- a/common/cmd_log.c
+++ b/common/cmd_log.c
@@ -256,7 +256,7 @@ U_BOOT_CMD(
"info - show pointer details\n"
"log reset - clear contents\n"
"log show - show contents\n"
- "log append <msg> - append <msg> to the logbuffer\n"
+ "log append <msg> - append <msg> to the logbuffer"
);
static int logbuff_printk(const char *line)
diff --git a/common/cmd_mac.c b/common/cmd_mac.c
index cf601e4e602..20403da39d9 100644
--- a/common/cmd_mac.c
+++ b/common/cmd_mac.c
@@ -44,20 +44,6 @@ U_BOOT_CMD(
" - program date\n"
"mac ports\n"
" - program the number of ports\n"
- "mac 0\n"
- " - program the MAC address for port 0\n"
- "mac 1\n"
- " - program the MAC address for port 1\n"
- "mac 2\n"
- " - program the MAC address for port 2\n"
- "mac 3\n"
- " - program the MAC address for port 3\n"
- "mac 4\n"
- " - program the MAC address for port 4\n"
- "mac 5\n"
- " - program the MAC address for port 5\n"
- "mac 6\n"
- " - program the MAC address for port 6\n"
- "mac 7\n"
- " - program the MAC address for port 7\n"
+ "mac X\n"
+ " - program the MAC address for port X [X=0...7]"
);
diff --git a/common/cmd_mem.c b/common/cmd_mem.c
index 2d4fc2a419e..cdf8c798dda 100644
--- a/common/cmd_mem.c
+++ b/common/cmd_mem.c
@@ -1172,39 +1172,39 @@ int do_unzip ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
md, 3, 1, do_mem_md,
"memory display",
- "[.b, .w, .l] address [# of objects]\n - memory display\n"
+ "[.b, .w, .l] address [# of objects]"
);
U_BOOT_CMD(
mm, 2, 1, do_mem_mm,
- "memory modify (auto-incrementing)",
- "[.b, .w, .l] address\n" " - memory modify, auto increment address\n"
+ "memory modify (auto-incrementing address)",
+ "[.b, .w, .l] address"
);
U_BOOT_CMD(
nm, 2, 1, do_mem_nm,
"memory modify (constant address)",
- "[.b, .w, .l] address\n - memory modify, read and keep address\n"
+ "[.b, .w, .l] address"
);
U_BOOT_CMD(
mw, 4, 1, do_mem_mw,
"memory write (fill)",
- "[.b, .w, .l] address value [count]\n - write memory\n"
+ "[.b, .w, .l] address value [count]"
);
U_BOOT_CMD(
cp, 4, 1, do_mem_cp,
"memory copy",
- "[.b, .w, .l] source target count\n - copy memory\n"
+ "[.b, .w, .l] source target count"
);
U_BOOT_CMD(
cmp, 4, 1, do_mem_cmp,
"memory compare",
- "[.b, .w, .l] addr1 addr2 count\n - compare memory\n"
+ "[.b, .w, .l] addr1 addr2 count"
);
#ifndef CONFIG_CRC32_VERIFY
@@ -1212,7 +1212,7 @@ U_BOOT_CMD(
U_BOOT_CMD(
crc32, 4, 1, do_mem_crc,
"checksum calculation",
- "address count [addr]\n - compute CRC32 checksum [save at addr]\n"
+ "address count [addr]\n - compute CRC32 checksum [save at addr]"
);
#else /* CONFIG_CRC32_VERIFY */
@@ -1221,7 +1221,7 @@ U_BOOT_CMD(
crc32, 5, 1, do_mem_crc,
"checksum calculation",
"address count [addr]\n - compute CRC32 checksum [save at addr]\n"
- "-v address count crc\n - verify crc of memory area\n"
+ "-v address count crc\n - verify crc of memory area"
);
#endif /* CONFIG_CRC32_VERIFY */
@@ -1230,43 +1230,40 @@ U_BOOT_CMD(
base, 2, 1, do_mem_base,
"print or set address offset",
"\n - print address offset for memory commands\n"
- "base off\n - set address offset for memory commands to 'off'\n"
+ "base off\n - set address offset for memory commands to 'off'"
);
U_BOOT_CMD(
loop, 3, 1, do_mem_loop,
"infinite loop on address range",
- "[.b, .w, .l] address number_of_objects\n"
- " - loop on a set of addresses\n"
+ "[.b, .w, .l] address number_of_objects"
);
#ifdef CONFIG_LOOPW
U_BOOT_CMD(
loopw, 4, 1, do_mem_loopw,
"infinite write loop on address range",
- "[.b, .w, .l] address number_of_objects data_to_write\n"
- " - loop on a set of addresses\n"
+ "[.b, .w, .l] address number_of_objects data_to_write"
);
#endif /* CONFIG_LOOPW */
U_BOOT_CMD(
mtest, 5, 1, do_mem_mtest,
- "simple RAM test",
- "[start [end [pattern [iterations]]]]\n"
- " - simple RAM read/write test\n"
+ "simple RAM read/write test",
+ "[start [end [pattern [iterations]]]]"
);
#ifdef CONFIG_MX_CYCLIC
U_BOOT_CMD(
mdc, 4, 1, do_mem_mdc,
"memory display cyclic",
- "[.b, .w, .l] address count delay(ms)\n - memory display cyclic\n"
+ "[.b, .w, .l] address count delay(ms)"
);
U_BOOT_CMD(
mwc, 4, 1, do_mem_mwc,
"memory write cyclic",
- "[.b, .w, .l] address value delay(ms)\n - memory write cyclic\n"
+ "[.b, .w, .l] address value delay(ms)"
);
#endif /* CONFIG_MX_CYCLIC */
@@ -1274,6 +1271,6 @@ U_BOOT_CMD(
U_BOOT_CMD(
unzip, 4, 1, do_unzip,
"unzip a memory region",
- "srcaddr dstaddr [dstsize]\n"
+ "srcaddr dstaddr [dstsize]"
);
#endif /* CONFIG_CMD_UNZIP */
diff --git a/common/cmd_mfsl.c b/common/cmd_mfsl.c
index 6470baceb87..b19ad0e6381 100644
--- a/common/cmd_mfsl.c
+++ b/common/cmd_mfsl.c
@@ -394,8 +394,7 @@ U_BOOT_CMD (frd, 3, 1, do_frd,
" 0 - non blocking data read\n"
" 1 - non blocking control read\n"
" 2 - blocking data read\n"
- " 3 - blocking control read\n");
-
+ " 3 - blocking control read");
U_BOOT_CMD (fwr, 4, 1, do_fwr,
"write data to FSL",
@@ -403,11 +402,11 @@ U_BOOT_CMD (fwr, 4, 1, do_fwr,
" 0 - non blocking data write\n"
" 1 - non blocking control write\n"
" 2 - blocking data write\n"
- " 3 - blocking control write\n");
+ " 3 - blocking control write");
U_BOOT_CMD (rspr, 3, 1, do_rspr,
"read/write special purpose register",
"- reg_num [write value] read/write special purpose register\n"
" 1 - MSR - Machine status register\n"
" 3 - EAR - Exception address register\n"
- " 5 - ESR - Exception status register\n");
+ " 5 - ESR - Exception status register");
diff --git a/common/cmd_mgdisk.c b/common/cmd_mgdisk.c
index 48323d45bef..aadc3356362 100644
--- a/common/cmd_mgdisk.c
+++ b/common/cmd_mgdisk.c
@@ -70,7 +70,7 @@ U_BOOT_CMD(
" - random read : mgd read [from] [to] [size]\n"
" - random write : mgd write [from] [to] [size]\n"
" - sector read : mgd readsec [sector] [to] [counts]\n"
- " - sector write : mgd writesec [from] [sector] [counts]\n"
+ " - sector write : mgd writesec [from] [sector] [counts]"
);
#endif
diff --git a/common/cmd_mii.c b/common/cmd_mii.c
index d70031aaa5d..65e13c3eb22 100644
--- a/common/cmd_mii.c
+++ b/common/cmd_mii.c
@@ -460,5 +460,5 @@ U_BOOT_CMD(
"mii read <addr> <reg> - read MII PHY <addr> register <reg>\n"
"mii write <addr> <reg> <data> - write MII PHY <addr> register <reg>\n"
"mii dump <addr> <reg> - pretty-print <addr> <reg> (0-5 only)\n"
- "Addr and/or reg may be ranges, e.g. 2-7.\n"
+ "Addr and/or reg may be ranges, e.g. 2-7."
);
diff --git a/common/cmd_misc.c b/common/cmd_misc.c
index 024299a877e..b97537ecd00 100644
--- a/common/cmd_misc.c
+++ b/common/cmd_misc.c
@@ -56,7 +56,7 @@ int do_irqinfo (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
U_BOOT_CMD(
irqinfo, 1, 1, do_irqinfo,
"print information about IRQs",
- NULL
+ ""
);
#endif
@@ -64,5 +64,5 @@ U_BOOT_CMD(
sleep , 2, 1, do_sleep,
"delay execution for some time",
"N\n"
- " - delay execution for N seconds (N is _decimal_ !!!)\n"
+ " - delay execution for N seconds (N is _decimal_ !!!)"
);
diff --git a/common/cmd_mmc.c b/common/cmd_mmc.c
index 039fe59c754..32fe49b775e 100644
--- a/common/cmd_mmc.c
+++ b/common/cmd_mmc.c
@@ -89,7 +89,7 @@ U_BOOT_CMD(
mmc, 3, 1, do_mmc,
"MMC sub-system",
"init [dev] - init MMC sub system\n"
- "mmc device [dev] - show or set current device\n"
+ "mmc device [dev] - show or set current device"
);
#else /* !CONFIG_GENERIC_MMC */
@@ -135,9 +135,10 @@ int do_mmcinfo (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
return 0;
}
-U_BOOT_CMD(mmcinfo, 2, 0, do_mmcinfo,
- "print MMC information",
- "<dev num>\n");
+U_BOOT_CMD(mmcinfo, 2, 0, do_mmcinfo,
+ "mmcinfo <dev num>-- display MMC info\n",
+ ""
+);
int do_mmcops(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
@@ -231,5 +232,5 @@ U_BOOT_CMD(
"read <device num> addr blk# cnt\n"
"mmc write <device num> addr blk# cnt\n"
"mmc rescan <device num>\n"
- "mmc list - list available devices\n");
+ "mmc list - lists available devices");
#endif
diff --git a/common/cmd_mp.c b/common/cmd_mp.c
index a0839c2fbb4..faa87001329 100644
--- a/common/cmd_mp.c
+++ b/common/cmd_mp.c
@@ -78,7 +78,7 @@ cpu_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
" Default for r3 is <num> and r6 is 0\n" \
"\n" \
" When cpu <num> is released r4 and r5 = 0.\n" \
- " r7 will contain the size of the initial mapped area\n"
+ " r7 will contain the size of the initial mapped area"
#endif
U_BOOT_CMD(
@@ -86,8 +86,9 @@ U_BOOT_CMD(
"Multiprocessor CPU boot manipulation and release",
"<num> reset - Reset cpu <num>\n"
"cpu <num> status - Status of cpu <num>\n"
- "cpu <num> release <addr> [args] - Release cpu <num> at <addr> with [args]\n"
+ "cpu <num> release <addr> [args] - Release cpu <num> at <addr> with [args]"
#ifdef CPU_ARCH_HELP
+ "\n"
CPU_ARCH_HELP
#endif
- );
+);
diff --git a/common/cmd_mtdparts.c b/common/cmd_mtdparts.c
index 8bd1db7d276..2d1446ecb8d 100644
--- a/common/cmd_mtdparts.c
+++ b/common/cmd_mtdparts.c
@@ -1863,7 +1863,7 @@ U_BOOT_CMD(
chpart, 2, 0, do_chpart,
"change active partition",
"part-id\n"
- " - change active partition (e.g. part-id = nand0,1)\n"
+ " - change active partition (e.g. part-id = nand0,1)"
);
U_BOOT_CMD(
@@ -1898,6 +1898,6 @@ U_BOOT_CMD(
"<size> := standard linux memsize OR '-' to denote all remaining space\n"
"<offset> := partition start offset within the device\n"
"<name> := '(' NAME ')'\n"
- "<ro-flag> := when set to 'ro' makes partition read-only (not used, passed to kernel)\n"
+ "<ro-flag> := when set to 'ro' makes partition read-only (not used, passed to kernel)"
);
/***************************************************/
diff --git a/common/cmd_nand.c b/common/cmd_nand.c
index 1992531f44b..94514160b5e 100644
--- a/common/cmd_nand.c
+++ b/common/cmd_nand.c
@@ -476,25 +476,26 @@ usage:
return 1;
}
-U_BOOT_CMD(nand, 5, 1, do_nand,
- "NAND sub-system",
- "info - show available NAND devices\n"
- "nand device [dev] - show or set current device\n"
- "nand read - addr off|partition size\n"
- "nand write - addr off|partition size\n"
- " read/write 'size' bytes starting at offset 'off'\n"
- " to/from memory address 'addr', skipping bad blocks.\n"
- "nand erase [clean] [off size] - erase 'size' bytes from\n"
- " offset 'off' (entire device if not specified)\n"
- "nand bad - show bad blocks\n"
- "nand dump[.oob] off - dump page\n"
- "nand scrub - really clean NAND erasing bad blocks (UNSAFE)\n"
- "nand markbad off - mark bad block at offset (UNSAFE)\n"
- "nand biterr off - make a bit error at offset (UNSAFE)\n"
+U_BOOT_CMD(nand, CONFIG_SYS_MAXARGS, 1, do_nand,
+ "NAND sub-system",
+ "info - show available NAND devices\n"
+ "nand device [dev] - show or set current device\n"
+ "nand read - addr off|partition size\n"
+ "nand write - addr off|partition size\n"
+ " read/write 'size' bytes starting at offset 'off'\n"
+ " to/from memory address 'addr', skipping bad blocks.\n"
+ "nand erase [clean] [off size] - erase 'size' bytes from\n"
+ " offset 'off' (entire device if not specified)\n"
+ "nand bad - show bad blocks\n"
+ "nand dump[.oob] off - dump page\n"
+ "nand scrub - really clean NAND erasing bad blocks (UNSAFE)\n"
+ "nand markbad off [...] - mark bad block(s) at offset (UNSAFE)\n"
+ "nand biterr off - make a bit error at offset (UNSAFE)"
#ifdef CONFIG_CMD_NAND_LOCK_UNLOCK
- "nand lock [tight] [status]\n"
- " bring nand to lock state or display locked pages\n"
- "nand unlock [offset] [size] - unlock section\n"
+ "\n"
+ "nand lock [tight] [status]\n"
+ " bring nand to lock state or display locked pages\n"
+ "nand unlock [offset] [size] - unlock section"
#endif
);
@@ -673,8 +674,8 @@ usage:
U_BOOT_CMD(nboot, 4, 1, do_nandboot,
"boot from NAND device",
- "[partition] | [[[loadAddr] dev] offset]\n");
-
+ "[partition] | [[[loadAddr] dev] offset]"
+);
#endif
#else /* CONFIG_NAND_LEGACY */
@@ -941,7 +942,7 @@ U_BOOT_CMD(
" offset `off' (entire device if not specified)\n"
"nand bad - show bad blocks\n"
"nand read.oob addr off size - read out-of-band data\n"
- "nand write.oob addr off size - read out-of-band data\n"
+ "nand write.oob addr off size - read out-of-band data"
);
int do_nandboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
@@ -1081,7 +1082,7 @@ int do_nandboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
nboot, 4, 1, do_nandboot,
"boot from NAND device",
- "loadAddr dev\n"
+ "loadAddr dev"
);
#endif
diff --git a/common/cmd_net.c b/common/cmd_net.c
index 92bbf85d113..68183c49af9 100644
--- a/common/cmd_net.c
+++ b/common/cmd_net.c
@@ -40,7 +40,7 @@ int do_bootp (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
bootp, 3, 1, do_bootp,
"boot image via network using BOOTP/TFTP protocol",
- "[loadAddress] [[hostIPaddr:]bootfilename]\n"
+ "[loadAddress] [[hostIPaddr:]bootfilename]"
);
int do_tftpb (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
@@ -51,7 +51,7 @@ int do_tftpb (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
tftpboot, 3, 1, do_tftpb,
"boot image via network using TFTP protocol",
- "[loadAddress] [[hostIPaddr:]bootfilename]\n"
+ "[loadAddress] [[hostIPaddr:]bootfilename]"
);
int do_rarpb (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
@@ -62,7 +62,7 @@ int do_rarpb (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
rarpboot, 3, 1, do_rarpb,
"boot image via network using RARP/TFTP protocol",
- "[loadAddress] [[hostIPaddr:]bootfilename]\n"
+ "[loadAddress] [[hostIPaddr:]bootfilename]"
);
#if defined(CONFIG_CMD_DHCP)
@@ -74,7 +74,7 @@ int do_dhcp (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
dhcp, 3, 1, do_dhcp,
"boot image via network using DHCP/TFTP protocol",
- "[loadAddress] [[hostIPaddr:]bootfilename]\n"
+ "[loadAddress] [[hostIPaddr:]bootfilename]"
);
#endif
@@ -87,7 +87,7 @@ int do_nfs (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
nfs, 3, 1, do_nfs,
"boot image via network using NFS protocol",
- "[loadAddress] [[hostIPaddr:]bootfilename]\n"
+ "[loadAddress] [[hostIPaddr:]bootfilename]"
);
#endif
@@ -269,7 +269,7 @@ int do_ping (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
ping, 2, 1, do_ping,
"send ICMP ECHO_REQUEST to network host",
- "pingAddress\n"
+ "pingAddress"
);
#endif
diff --git a/common/cmd_nvedit.c b/common/cmd_nvedit.c
index ac9e5cfc320..2186205a1a5 100644
--- a/common/cmd_nvedit.c
+++ b/common/cmd_nvedit.c
@@ -569,7 +569,7 @@ int do_saveenv (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
saveenv, 1, 0, do_saveenv,
"save environment variables to persistent storage",
- NULL
+ ""
);
#endif
@@ -602,7 +602,7 @@ U_BOOT_CMD(
"print environment variables",
"\n - print values of all environment variables\n"
"printenv name ...\n"
- " - print value of environment variable 'name'\n"
+ " - print value of environment variable 'name'"
);
U_BOOT_CMD(
@@ -611,7 +611,7 @@ U_BOOT_CMD(
"name value ...\n"
" - set environment variable 'name' to 'value ...'\n"
"setenv name\n"
- " - delete environment variable 'name'\n"
+ " - delete environment variable 'name'"
);
#if defined(CONFIG_CMD_ASKENV)
@@ -627,7 +627,7 @@ U_BOOT_CMD(
" - get environment variable 'name' from stdin (max 'size' chars)\n"
"askenv name [message] size\n"
" - display 'message' string and get environment variable 'name'"
- "from stdin (max 'size' chars)\n"
+ "from stdin (max 'size' chars)"
);
#endif
@@ -637,6 +637,6 @@ U_BOOT_CMD(
run, CONFIG_SYS_MAXARGS, 1, do_run,
"run commands in an environment variable",
"var [...]\n"
- " - run the commands in the environment variable(s) 'var'\n"
+ " - run the commands in the environment variable(s) 'var'"
);
#endif
diff --git a/common/cmd_onenand.c b/common/cmd_onenand.c
index e8f06d7f433..85bd2cb68e2 100644
--- a/common/cmd_onenand.c
+++ b/common/cmd_onenand.c
@@ -486,5 +486,5 @@ U_BOOT_CMD(
"onenand test [off size] - test 'size' bytes from\n"
" offset 'off' (entire device if not specified)\n"
"onenand dump[.oob] off - dump page\n"
- "onenand markbad off - mark bad block at offset (UNSAFE)\n"
+ "onenand markbad off [...] - mark bad block(s) at offset (UNSAFE)"
);
diff --git a/common/cmd_otp.c b/common/cmd_otp.c
index 4be43448a89..30af5a31a84 100644
--- a/common/cmd_otp.c
+++ b/common/cmd_otp.c
@@ -233,4 +233,5 @@ U_BOOT_CMD(otp, 7, 0, do_otp,
"otp write [--force] <addr> <page> [count] [half]\n"
" - write 'count' half-pages starting at 'page' (offset 'half') from 'addr'\n"
"otp lock <page> <count>\n"
- " - lock 'count' pages starting at 'page'\n");
+ " - lock 'count' pages starting at 'page'"
+);
diff --git a/common/cmd_pci.c b/common/cmd_pci.c
index 4a9317f16c5..8a260df8bb1 100644
--- a/common/cmd_pci.c
+++ b/common/cmd_pci.c
@@ -555,5 +555,5 @@ U_BOOT_CMD(
"pci modify[.b, .w, .l] b.d.f address\n"
" - modify, auto increment CFG address\n"
"pci write[.b, .w, .l] b.d.f address value\n"
- " - write to CFG address\n"
+ " - write to CFG address"
);
diff --git a/common/cmd_pcmcia.c b/common/cmd_pcmcia.c
index e448456971d..e576b0c5979 100644
--- a/common/cmd_pcmcia.c
+++ b/common/cmd_pcmcia.c
@@ -90,8 +90,8 @@ U_BOOT_CMD(
pinit, 2, 0, do_pinit,
"PCMCIA sub-system",
"on - power on PCMCIA socket\n"
- "pinit off - power off PCMCIA socket\n"
- );
+ "pinit off - power off PCMCIA socket"
+);
#endif
diff --git a/common/cmd_portio.c b/common/cmd_portio.c
index 41b1991a275..f8befee296c 100644
--- a/common/cmd_portio.c
+++ b/common/cmd_portio.c
@@ -94,7 +94,7 @@ int do_portio_out (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
out, 3, 1, do_portio_out,
"write datum to IO port",
- "[.b, .w, .l] port value\n - output to IO port\n"
+ "[.b, .w, .l] port value\n - output to IO port"
);
int do_portio_in (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
@@ -159,5 +159,5 @@ U_BOOT_CMD(
in, 2, 1, do_portio_in,
"read data from an IO port",
"[.b, .w, .l] port\n"
- " - read datum from IO port\n"
+ " - read datum from IO port"
);
diff --git a/common/cmd_reginfo.c b/common/cmd_reginfo.c
index 0e28c05b850..abb9941afbd 100644
--- a/common/cmd_reginfo.c
+++ b/common/cmd_reginfo.c
@@ -383,5 +383,6 @@ int do_reginfo (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
reginfo, 2, 1, do_reginfo,
"print register information",
+ ""
);
#endif
diff --git a/common/cmd_reiser.c b/common/cmd_reiser.c
index 14e4bd40e36..8ede7823165 100644
--- a/common/cmd_reiser.c
+++ b/common/cmd_reiser.c
@@ -104,7 +104,7 @@ U_BOOT_CMD(
reiserls, 4, 1, do_reiserls,
"list files in a directory (default /)",
"<interface> <dev[:part]> [directory]\n"
- " - list files from 'dev' on 'interface' in a 'directory'\n"
+ " - list files from 'dev' on 'interface' in a 'directory'"
);
/******************************************************************************
@@ -235,5 +235,5 @@ U_BOOT_CMD(
"load binary file from a Reiser filesystem",
"<interface> <dev[:part]> [addr] [filename] [bytes]\n"
" - load binary file 'filename' from 'dev' on 'interface'\n"
- " to address 'addr' from dos filesystem\n"
+ " to address 'addr' from dos filesystem"
);
diff --git a/common/cmd_sata.c b/common/cmd_sata.c
index e84977870ab..a8147e0e0fe 100644
--- a/common/cmd_sata.c
+++ b/common/cmd_sata.c
@@ -200,4 +200,5 @@ U_BOOT_CMD(
"sata device [dev] - show or set current device\n"
"sata part [dev] - print partition table\n"
"sata read addr blk# cnt\n"
- "sata write addr blk# cnt\n");
+ "sata write addr blk# cnt"
+);
diff --git a/common/cmd_scsi.c b/common/cmd_scsi.c
index dd2c1ae73d6..f89492fe228 100644
--- a/common/cmd_scsi.c
+++ b/common/cmd_scsi.c
@@ -623,11 +623,11 @@ U_BOOT_CMD(
"scsi device [dev] - show or set current device\n"
"scsi part [dev] - print partition table of one or all SCSI devices\n"
"scsi read addr blk# cnt - read `cnt' blocks starting at block `blk#'\n"
- " to memory address `addr'\n"
+ " to memory address `addr'"
);
U_BOOT_CMD(
scsiboot, 3, 1, do_scsiboot,
"boot from SCSI device",
- "loadAddr dev:part\n"
+ "loadAddr dev:part"
);
diff --git a/common/cmd_setexpr.c b/common/cmd_setexpr.c
index 9a5e720d68b..f8b5d4dcfe8 100644
--- a/common/cmd_setexpr.c
+++ b/common/cmd_setexpr.c
@@ -66,5 +66,5 @@ U_BOOT_CMD(
"set environment variable as the result of eval expression",
"name value1 <op> value2\n"
" - set environment variable 'name' to the result of the evaluated\n"
- " express specified by <op>. <op> can be &, |, ^, +, -, *, /, %\n"
+ " express specified by <op>. <op> can be &, |, ^, +, -, *, /, %"
);
diff --git a/common/cmd_sf.c b/common/cmd_sf.c
index 6a60b16805b..2d463a8c978 100644
--- a/common/cmd_sf.c
+++ b/common/cmd_sf.c
@@ -188,4 +188,5 @@ U_BOOT_CMD(
" `offset' to memory at `addr'\n"
"sf write addr offset len - write `len' bytes from memory\n"
" at `addr' to flash at `offset'\n"
- "sf erase offset len - erase `len' bytes from `offset'\n");
+ "sf erase offset len - erase `len' bytes from `offset'"
+);
diff --git a/common/cmd_source.c b/common/cmd_source.c
index 43e13159293..965b8b1b045 100644
--- a/common/cmd_source.c
+++ b/common/cmd_source.c
@@ -229,10 +229,11 @@ U_BOOT_CMD(
"run script from memory",
"[addr]\n"
"\t- run script starting at addr\n"
- "\t- A valid image header must be present\n"
+ "\t- A valid image header must be present"
#if defined(CONFIG_FIT)
+ "\n"
"For FIT format uImage addr must include subimage\n"
- "unit name in the form of addr:<subimg_uname>\n"
+ "unit name in the form of addr:<subimg_uname>"
#endif
);
@@ -251,6 +252,6 @@ do_autoscr (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
autoscr, 2, 0, do_autoscr,
"DEPRECATED - use \"source\" command instead",
- "DEPRECATED - use \"source\" command instead\n"
+ ""
);
#endif
diff --git a/common/cmd_spi.c b/common/cmd_spi.c
index 746d14f21ac..ab7aac780db 100644
--- a/common/cmd_spi.c
+++ b/common/cmd_spi.c
@@ -142,5 +142,5 @@ U_BOOT_CMD(
"<device> <bit_len> <dout> - Send <bit_len> bits from <dout> out the SPI\n"
"<device> - Identifies the chip select of the device\n"
"<bit_len> - Number of bits to send (base 10)\n"
- "<dout> - Hexadecimal string that gets sent\n"
+ "<dout> - Hexadecimal string that gets sent"
);
diff --git a/common/cmd_strings.c b/common/cmd_strings.c
index 4517ba29e71..3a0d8ff43ad 100644
--- a/common/cmd_strings.c
+++ b/common/cmd_strings.c
@@ -43,4 +43,5 @@ int do_strings(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(strings, 3, 1, do_strings,
"display strings",
"<addr> [byte count]\n"
- " - display strings at <addr> for at least [byte count] or first double NUL\n");
+ " - display strings at <addr> for at least [byte count] or first double NUL"
+);
diff --git a/common/cmd_ubi.c b/common/cmd_ubi.c
index 64a730724c6..bbca3892c93 100644
--- a/common/cmd_ubi.c
+++ b/common/cmd_ubi.c
@@ -609,5 +609,5 @@ U_BOOT_CMD(ubi, 6, 1, do_ubi,
"[Legends]\n"
" volume: charater name\n"
" size: KiB, MiB, GiB, and bytes\n"
- " type: s[tatic] or d[ynamic] (default=dynamic)\n"
+ " type: s[tatic] or d[ynamic] (default=dynamic)"
);
diff --git a/common/cmd_ubifs.c b/common/cmd_ubifs.c
index 4767aa4b606..d9f60d51edb 100644
--- a/common/cmd_ubifs.c
+++ b/common/cmd_ubifs.c
@@ -119,14 +119,17 @@ int do_ubifs_load(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
ubifsmount, 2, 0, do_ubifs_mount,
"mount UBIFS volume",
- "\n");
+ ""
+);
U_BOOT_CMD(ubifsls, 2, 0, do_ubifs_ls,
- "list files in a directory",
- "[directory]\n"
- " - list files in a 'directory' (default '/')\n");
+ "list files in a directory",
+ "[directory]\n"
+ " - list files in a 'directory' (default '/')"
+);
U_BOOT_CMD(ubifsload, 4, 0, do_ubifs_load,
- "load file from an UBIFS filesystem",
- "<addr> <filename> [bytes]\n"
- " - load file 'filename' to address 'addr'\n");
+ "load file from an UBIFS filesystem",
+ "<addr> <filename> [bytes]\n"
+ " - load file 'filename' to address 'addr'"
+);
diff --git a/common/cmd_universe.c b/common/cmd_universe.c
index bfb91b58c60..0a6d722a0ec 100644
--- a/common/cmd_universe.c
+++ b/common/cmd_universe.c
@@ -382,5 +382,5 @@ U_BOOT_CMD(
" 03 -> Configuration Space\n"
" [vdw] = VMEbus Maximum Datawidth: 01 -> D8 Data Width\n"
" 02 -> D16 Data Width\n"
- " 03 -> D32 Data Width\n"
+ " 03 -> D32 Data Width"
);
diff --git a/common/cmd_usb.c b/common/cmd_usb.c
index a18e16e1004..7b8ee6b48e7 100644
--- a/common/cmd_usb.c
+++ b/common/cmd_usb.c
@@ -686,14 +686,14 @@ U_BOOT_CMD(
"usb part [dev] - print partition table of one or all USB storage"
" devices\n"
"usb read addr blk# cnt - read `cnt' blocks starting at block `blk#'\n"
- " to memory address `addr'\n"
+ " to memory address `addr'"
);
U_BOOT_CMD(
usbboot, 3, 1, do_usbboot,
"boot from USB device",
- "loadAddr dev:part\n"
+ "loadAddr dev:part"
);
#else
@@ -702,6 +702,6 @@ U_BOOT_CMD(
"USB sub-system",
"reset - reset (rescan) USB controller\n"
"usb tree - show USB device tree\n"
- "usb info [dev] - show available USB devices\n"
+ "usb info [dev] - show available USB devices"
);
#endif
diff --git a/common/cmd_vfd.c b/common/cmd_vfd.c
index 84d9530aa99..9c5b0385b5a 100644
--- a/common/cmd_vfd.c
+++ b/common/cmd_vfd.c
@@ -71,7 +71,7 @@ U_BOOT_CMD(
"/N\n"
" - load bitmap N to the VFDs (N is _decimal_ !!!)\n"
"vfd ADDR\n"
- " - load bitmap at address ADDR\n"
+ " - load bitmap at address ADDR"
);
#endif
diff --git a/common/cmd_ximg.c b/common/cmd_ximg.c
index a45d2480e29..5593b2d24b7 100644
--- a/common/cmd_ximg.c
+++ b/common/cmd_ximg.c
@@ -180,11 +180,12 @@ do_imgextract(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
}
U_BOOT_CMD(imxtract, 4, 1, do_imgextract,
- "extract a part of a multi-image",
- "addr part [dest]\n"
- " - extract <part> from legacy image at <addr> and copy to <dest>\n"
+ "extract a part of a multi-image",
+ "addr part [dest]\n"
+ " - extract <part> from legacy image at <addr> and copy to <dest>"
#if defined(CONFIG_FIT)
- "addr uname [dest]\n"
- " - extract <uname> subimage from FIT image at <addr> and copy to <dest>\n"
+ "\n"
+ "addr uname [dest]\n"
+ " - extract <uname> subimage from FIT image at <addr> and copy to <dest>"
#endif
);
diff --git a/common/cmd_yaffs2.c b/common/cmd_yaffs2.c
index c47ea769fea..d448d04831d 100644
--- a/common/cmd_yaffs2.c
+++ b/common/cmd_yaffs2.c
@@ -143,71 +143,71 @@ int do_ydump (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
ymount, 3, 0, do_ymount,
"mount yaffs",
- "\n"
+ ""
);
U_BOOT_CMD(
yumount, 3, 0, do_yumount,
"unmount yaffs",
- "\n"
+ ""
);
U_BOOT_CMD(
yls, 4, 0, do_yls,
"yaffs ls",
- "[-l] name\n"
+ "[-l] name"
);
U_BOOT_CMD(
yrd, 2, 0, do_yrd,
"read file from yaffs",
- "filename\n"
+ "filename"
);
U_BOOT_CMD(
ywr, 4, 0, do_ywr,
"write file to yaffs",
- "filename value num_vlues\n"
+ "filename value num_vlues"
);
U_BOOT_CMD(
yrdm, 3, 0, do_yrdm,
"read file to memory from yaffs",
- "filename offset\n"
+ "filename offset"
);
U_BOOT_CMD(
ywrm, 4, 0, do_ywrm,
"write file from memory to yaffs",
- "filename offset size\n"
+ "filename offset size"
);
U_BOOT_CMD(
ymkdir, 2, 0, do_ymkdir,
"YAFFS mkdir",
- "dirname\n"
+ "dirname"
);
U_BOOT_CMD(
yrmdir, 2, 0, do_yrmdir,
"YAFFS rmdir",
- "dirname\n"
+ "dirname"
);
U_BOOT_CMD(
yrm, 2, 0, do_yrm,
"YAFFS rm",
- "path\n"
+ "path"
);
U_BOOT_CMD(
ymv, 4, 0, do_ymv,
"YAFFS mv",
- "oldPath newPath\n"
+ "oldPath newPath"
);
U_BOOT_CMD(
ydump, 2, 0, do_ydump,
"YAFFS device struct",
- "dirname\n"
+ "dirname"
);
diff --git a/common/command.c b/common/command.c
index 16f3afe3947..b57f8dfc81f 100644
--- a/common/command.c
+++ b/common/command.c
@@ -39,7 +39,7 @@ do_version (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
version, 1, 1, do_version,
"print monitor version",
- NULL
+ ""
);
#if defined(CONFIG_CMD_ECHO)
@@ -73,7 +73,7 @@ U_BOOT_CMD(
echo, CONFIG_SYS_MAXARGS, 1, do_echo,
"echo args to console",
"[args..]\n"
- " - echo args to console; \\c suppresses newline\n"
+ " - echo args to console; \\c suppresses newline"
);
#endif
@@ -204,8 +204,7 @@ do_test (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
test, CONFIG_SYS_MAXARGS, 1, do_test,
"minimal test like /bin/sh",
- "[args..]\n"
- " - test functionality\n"
+ "[args..]"
);
int
@@ -223,7 +222,7 @@ do_exit (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
exit, 2, 1, do_exit,
"exit script",
- " - exit functionality\n"
+ ""
);
@@ -314,15 +313,15 @@ U_BOOT_CMD(
"'help' prints online help for the monitor commands.\n\n"
"Without arguments, it prints a short usage message for all commands.\n\n"
"To get detailed help information for specific commands you can type\n"
- "'help' with one or more command names as arguments.\n"
+ "'help' with one or more command names as arguments."
);
-/* This do not ust the U_BOOT_CMD macro as ? can't be used in symbol names */
+/* This does not use the U_BOOT_CMD macro as ? can't be used in symbol names */
#ifdef CONFIG_SYS_LONGHELP
cmd_tbl_t __u_boot_cmd_question_mark Struct_Section = {
"?", CONFIG_SYS_MAXARGS, 1, do_help,
"alias for 'help'",
- NULL
+ ""
};
#else
cmd_tbl_t __u_boot_cmd_question_mark Struct_Section = {
diff --git a/common/hush.c b/common/hush.c
index cf5782a7cdb..97fd07067ea 100644
--- a/common/hush.c
+++ b/common/hush.c
@@ -3627,7 +3627,7 @@ U_BOOT_CMD(
"print local hushshell variables",
"\n - print values of all hushshell variables\n"
"showvar name ...\n"
- " - print value of hushshell variable 'name'\n"
+ " - print value of hushshell variable 'name'"
);
#endif
diff --git a/common/lcd.c b/common/lcd.c
index 41551707dd9..74a5c77693f 100644
--- a/common/lcd.c
+++ b/common/lcd.c
@@ -427,7 +427,7 @@ static int lcd_clear (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
cls, 1, 1, lcd_clear,
"clear screen",
- NULL
+ ""
);
/*----------------------------------------------------------------------*/