summaryrefslogtreecommitdiff
path: root/common/virtex2.c
diff options
context:
space:
mode:
Diffstat (limited to 'common/virtex2.c')
-rw-r--r--common/virtex2.c68
1 files changed, 34 insertions, 34 deletions
diff --git a/common/virtex2.c b/common/virtex2.c
index 52da1b2ca33..50d0921844f 100644
--- a/common/virtex2.c
+++ b/common/virtex2.c
@@ -43,34 +43,34 @@
/*
* If the SelectMap interface can be overrun by the processor, define
- * CFG_FPGA_CHECK_BUSY and/or CONFIG_FPGA_DELAY in the board configuration
+ * CONFIG_SYS_FPGA_CHECK_BUSY and/or CONFIG_FPGA_DELAY in the board configuration
* file and add board-specific support for checking BUSY status. By default,
* assume that the SelectMap interface cannot be overrun.
*/
-#ifndef CFG_FPGA_CHECK_BUSY
-#undef CFG_FPGA_CHECK_BUSY
+#ifndef CONFIG_SYS_FPGA_CHECK_BUSY
+#undef CONFIG_SYS_FPGA_CHECK_BUSY
#endif
#ifndef CONFIG_FPGA_DELAY
#define CONFIG_FPGA_DELAY()
#endif
-#ifndef CFG_FPGA_PROG_FEEDBACK
-#define CFG_FPGA_PROG_FEEDBACK
+#ifndef CONFIG_SYS_FPGA_PROG_FEEDBACK
+#define CONFIG_SYS_FPGA_PROG_FEEDBACK
#endif
/*
* Don't allow config cycle to be interrupted
*/
-#ifndef CFG_FPGA_CHECK_CTRLC
-#undef CFG_FPGA_CHECK_CTRLC
+#ifndef CONFIG_SYS_FPGA_CHECK_CTRLC
+#undef CONFIG_SYS_FPGA_CHECK_CTRLC
#endif
/*
* Check for errors during configuration by default
*/
-#ifndef CFG_FPGA_CHECK_ERROR
-#define CFG_FPGA_CHECK_ERROR
+#ifndef CONFIG_SYS_FPGA_CHECK_ERROR
+#define CONFIG_SYS_FPGA_CHECK_ERROR
#endif
/*
@@ -81,8 +81,8 @@
* which yields 11.44 mS. So let's make it bigger in order to handle
* an XC2V1000, if anyone can ever get ahold of one.
*/
-#ifndef CFG_FPGA_WAIT_INIT
-#define CFG_FPGA_WAIT_INIT CFG_HZ/2 /* 500 ms */
+#ifndef CONFIG_SYS_FPGA_WAIT_INIT
+#define CONFIG_SYS_FPGA_WAIT_INIT CONFIG_SYS_HZ/2 /* 500 ms */
#endif
/*
@@ -90,15 +90,15 @@
* This is normally not necessary since for most reasonable configuration
* clock frequencies (i.e. 66 MHz or less), BUSY monitoring is unnecessary.
*/
-#ifndef CFG_FPGA_WAIT_BUSY
-#define CFG_FPGA_WAIT_BUSY CFG_HZ/200 /* 5 ms*/
+#ifndef CONFIG_SYS_FPGA_WAIT_BUSY
+#define CONFIG_SYS_FPGA_WAIT_BUSY CONFIG_SYS_HZ/200 /* 5 ms*/
#endif
/* Default timeout for waiting for FPGA to enter operational mode after
* configuration data has been written.
*/
-#ifndef CFG_FPGA_WAIT_CONFIG
-#define CFG_FPGA_WAIT_CONFIG CFG_HZ/5 /* 200 ms */
+#ifndef CONFIG_SYS_FPGA_WAIT_CONFIG
+#define CONFIG_SYS_FPGA_WAIT_CONFIG CONFIG_SYS_HZ/5 /* 200 ms */
#endif
static int Virtex2_ssm_load (Xilinx_desc * desc, void *buf, size_t bsize);
@@ -232,7 +232,7 @@ static int Virtex2_ssm_load (Xilinx_desc * desc, void *buf, size_t bsize)
fn->clk, fn->cs, fn->wr, fn->rdata, fn->wdata,
fn->busy, fn->abort, fn->post);
-#ifdef CFG_FPGA_PROG_FEEDBACK
+#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
printf ("Initializing FPGA Device %d...\n", cookie);
#endif
/*
@@ -252,10 +252,10 @@ static int Virtex2_ssm_load (Xilinx_desc * desc, void *buf, size_t bsize)
udelay (10);
ts = get_timer (0);
do {
- if (get_timer (ts) > CFG_FPGA_WAIT_INIT) {
+ if (get_timer (ts) > CONFIG_SYS_FPGA_WAIT_INIT) {
printf ("%s:%d: ** Timeout after %d ticks waiting for INIT"
" to assert.\n", __FUNCTION__, __LINE__,
- CFG_FPGA_WAIT_INIT);
+ CONFIG_SYS_FPGA_WAIT_INIT);
(*fn->abort) (cookie);
return FPGA_FAIL;
}
@@ -271,10 +271,10 @@ static int Virtex2_ssm_load (Xilinx_desc * desc, void *buf, size_t bsize)
ts = get_timer (0);
do {
CONFIG_FPGA_DELAY ();
- if (get_timer (ts) > CFG_FPGA_WAIT_INIT) {
+ if (get_timer (ts) > CONFIG_SYS_FPGA_WAIT_INIT) {
printf ("%s:%d: ** Timeout after %d ticks waiting for INIT"
" to deassert.\n", __FUNCTION__, __LINE__,
- CFG_FPGA_WAIT_INIT);
+ CONFIG_SYS_FPGA_WAIT_INIT);
(*fn->abort) (cookie);
return FPGA_FAIL;
}
@@ -289,7 +289,7 @@ static int Virtex2_ssm_load (Xilinx_desc * desc, void *buf, size_t bsize)
* Load the data byte by byte
*/
while (bytecount < bsize) {
-#ifdef CFG_FPGA_CHECK_CTRLC
+#ifdef CONFIG_SYS_FPGA_CHECK_CTRLC
if (ctrlc ()) {
(*fn->abort) (cookie);
return FPGA_FAIL;
@@ -302,7 +302,7 @@ static int Virtex2_ssm_load (Xilinx_desc * desc, void *buf, size_t bsize)
break;
}
-#ifdef CFG_FPGA_CHECK_ERROR
+#ifdef CONFIG_SYS_FPGA_CHECK_ERROR
if ((*fn->init) (cookie)) {
printf ("\n%s:%d: ** Error: INIT asserted during"
" configuration\n", __FUNCTION__, __LINE__);
@@ -323,20 +323,20 @@ static int Virtex2_ssm_load (Xilinx_desc * desc, void *buf, size_t bsize)
CONFIG_FPGA_DELAY ();
(*fn->clk) (TRUE, TRUE, cookie);
-#ifdef CFG_FPGA_CHECK_BUSY
+#ifdef CONFIG_SYS_FPGA_CHECK_BUSY
ts = get_timer (0);
while ((*fn->busy) (cookie)) {
- if (get_timer (ts) > CFG_FPGA_WAIT_BUSY) {
+ if (get_timer (ts) > CONFIG_SYS_FPGA_WAIT_BUSY) {
printf ("%s:%d: ** Timeout after %d ticks waiting for"
" BUSY to deassert\n",
- __FUNCTION__, __LINE__, CFG_FPGA_WAIT_BUSY);
+ __FUNCTION__, __LINE__, CONFIG_SYS_FPGA_WAIT_BUSY);
(*fn->abort) (cookie);
return FPGA_FAIL;
}
}
#endif
-#ifdef CFG_FPGA_PROG_FEEDBACK
+#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
if (bytecount % (bsize / 40) == 0)
putc ('.');
#endif
@@ -349,7 +349,7 @@ static int Virtex2_ssm_load (Xilinx_desc * desc, void *buf, size_t bsize)
(*fn->cs) (FALSE, TRUE, cookie);
(*fn->wr) (FALSE, TRUE, cookie);
-#ifdef CFG_FPGA_PROG_FEEDBACK
+#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
putc ('\n');
#endif
@@ -360,10 +360,10 @@ static int Virtex2_ssm_load (Xilinx_desc * desc, void *buf, size_t bsize)
ts = get_timer (0);
ret_val = FPGA_SUCCESS;
while (((*fn->done) (cookie) == FPGA_FAIL) || (*fn->init) (cookie)) {
- if (get_timer (ts) > CFG_FPGA_WAIT_CONFIG) {
+ if (get_timer (ts) > CONFIG_SYS_FPGA_WAIT_CONFIG) {
printf ("%s:%d: ** Timeout after %d ticks waiting for DONE to"
"assert and INIT to deassert\n",
- __FUNCTION__, __LINE__, CFG_FPGA_WAIT_CONFIG);
+ __FUNCTION__, __LINE__, CONFIG_SYS_FPGA_WAIT_CONFIG);
(*fn->abort) (cookie);
ret_val = FPGA_FAIL;
break;
@@ -371,7 +371,7 @@ static int Virtex2_ssm_load (Xilinx_desc * desc, void *buf, size_t bsize)
}
if (ret_val == FPGA_SUCCESS) {
-#ifdef CFG_FPGA_PROG_FEEDBACK
+#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
printf ("Initialization of FPGA device %d complete\n", cookie);
#endif
/*
@@ -381,7 +381,7 @@ static int Virtex2_ssm_load (Xilinx_desc * desc, void *buf, size_t bsize)
(*fn->post) (cookie);
}
} else {
-#ifdef CFG_FPGA_PROG_FEEDBACK
+#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
printf ("** Initialization of FPGA device %d FAILED\n",
cookie);
#endif
@@ -412,7 +412,7 @@ static int Virtex2_ssm_dump (Xilinx_desc * desc, void *buf, size_t bsize)
(*fn->clk) (TRUE, TRUE, cookie);
while (bytecount < bsize) {
-#ifdef CFG_FPGA_CHECK_CTRLC
+#ifdef CONFIG_SYS_FPGA_CHECK_CTRLC
if (ctrlc ()) {
(*fn->abort) (cookie);
return FPGA_FAIL;
@@ -424,7 +424,7 @@ static int Virtex2_ssm_dump (Xilinx_desc * desc, void *buf, size_t bsize)
(*fn->clk) (FALSE, TRUE, cookie);
(*fn->clk) (TRUE, TRUE, cookie);
(*fn->rdata) (&(data[bytecount++]), cookie);
-#ifdef CFG_FPGA_PROG_FEEDBACK
+#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
if (bytecount % (bsize / 40) == 0)
putc ('.');
#endif
@@ -437,7 +437,7 @@ static int Virtex2_ssm_dump (Xilinx_desc * desc, void *buf, size_t bsize)
(*fn->clk) (FALSE, TRUE, cookie);
(*fn->clk) (TRUE, TRUE, cookie);
-#ifdef CFG_FPGA_PROG_FEEDBACK
+#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
putc ('\n');
#endif
puts ("Done.\n");