summaryrefslogtreecommitdiff
path: root/common/usb.c
diff options
context:
space:
mode:
Diffstat (limited to 'common/usb.c')
-rw-r--r--common/usb.c40
1 files changed, 25 insertions, 15 deletions
diff --git a/common/usb.c b/common/usb.c
index 7ab5df670b..ee181528c8 100644
--- a/common/usb.c
+++ b/common/usb.c
@@ -58,7 +58,7 @@
#undef USB_DEBUG
#ifdef USB_DEBUG
-#define USB_PRINTF(fmt, args...) printf (fmt , ##args)
+#define USB_PRINTF(fmt, args...) printf(fmt , ##args)
#else
#define USB_PRINTF(fmt, args...)
#endif
@@ -87,11 +87,12 @@ static int hub_port_reset(struct usb_device *dev, int port,
* wait_ms
*/
-void __inline__ wait_ms(unsigned long ms)
+inline void wait_ms(unsigned long ms)
{
while (ms-- > 0)
udelay(1000);
}
+
/***************************************************************************
* Init USB Device
*/
@@ -245,9 +246,9 @@ int usb_maxpacket(struct usb_device *dev, unsigned long pipe)
{
/* direction is out -> use emaxpacket out */
if ((pipe & USB_DIR_IN) == 0)
- return(dev->epmaxpacketout[((pipe>>15) & 0xf)]);
+ return dev->epmaxpacketout[((pipe>>15) & 0xf)];
else
- return(dev->epmaxpacketin[((pipe>>15) & 0xf)]);
+ return dev->epmaxpacketin[((pipe>>15) & 0xf)];
}
/* The routine usb_set_maxpacket_ep() is extracted from the loop of routine
@@ -269,7 +270,7 @@ usb_set_maxpacket_ep(struct usb_device *dev, struct usb_endpoint_descriptor *ep)
USB_ENDPOINT_XFER_CONTROL) {
/* Control => bidirectional */
dev->epmaxpacketout[b] = ep->wMaxPacketSize;
- dev->epmaxpacketin [b] = ep->wMaxPacketSize;
+ dev->epmaxpacketin[b] = ep->wMaxPacketSize;
USB_PRINTF("##Control EP epmaxpacketout/in[%d] = %d\n",
b, dev->epmaxpacketin[b]);
} else {
@@ -779,13 +780,13 @@ int usb_new_device(struct usb_device *dev)
* invalid header while reading 8 bytes as device descriptor. */
dev->descriptor.bMaxPacketSize0 = 8; /* Start off at 8 bytes */
dev->maxpacketsize = PACKET_SIZE_8;
- dev->epmaxpacketin [0] = 8;
+ dev->epmaxpacketin[0] = 8;
dev->epmaxpacketout[0] = 8;
err = usb_get_descriptor(dev, USB_DT_DEVICE, 0, &dev->descriptor, 8);
if (err < 8) {
printf("\n USB device not responding, " \
- "giving up (status=%lX)\n",dev->status);
+ "giving up (status=%lX)\n", dev->status);
return 1;
}
#else
@@ -793,7 +794,8 @@ int usb_new_device(struct usb_device *dev)
* reset of the device (Linux uses the same sequence)
* Some equipment is said to work only with such init sequence; this
* patch is based on the work by Alan Stern:
- * http://sourceforge.net/mailarchive/forum.php?thread_id=5729457&forum_id=5398
+ * http://sourceforge.net/mailarchive/forum.php?
+ * thread_id=5729457&forum_id=5398
*/
struct usb_device_descriptor *desc;
int port = -1;
@@ -809,7 +811,7 @@ int usb_new_device(struct usb_device *dev)
dev->descriptor.bMaxPacketSize0 = 64; /* Start off at 64 bytes */
/* Default to 64 byte max packet size */
dev->maxpacketsize = PACKET_SIZE_64;
- dev->epmaxpacketin [0] = 64;
+ dev->epmaxpacketin[0] = 64;
dev->epmaxpacketout[0] = 64;
err = usb_get_descriptor(dev, USB_DT_DEVICE, 0, desc, 64);
@@ -844,13 +846,21 @@ int usb_new_device(struct usb_device *dev)
}
#endif
- dev->epmaxpacketin [0] = dev->descriptor.bMaxPacketSize0;
+ dev->epmaxpacketin[0] = dev->descriptor.bMaxPacketSize0;
dev->epmaxpacketout[0] = dev->descriptor.bMaxPacketSize0;
switch (dev->descriptor.bMaxPacketSize0) {
- case 8: dev->maxpacketsize = PACKET_SIZE_8; break;
- case 16: dev->maxpacketsize = PACKET_SIZE_16; break;
- case 32: dev->maxpacketsize = PACKET_SIZE_32; break;
- case 64: dev->maxpacketsize = PACKET_SIZE_64; break;
+ case 8:
+ dev->maxpacketsize = PACKET_SIZE_8;
+ break;
+ case 16:
+ dev->maxpacketsize = PACKET_SIZE_16;
+ break;
+ case 32:
+ dev->maxpacketsize = PACKET_SIZE_32;
+ break;
+ case 64:
+ dev->maxpacketsize = PACKET_SIZE_64;
+ break;
}
dev->devnum = addr;
@@ -947,7 +957,7 @@ void usb_scan_devices(void)
#undef USB_HUB_DEBUG
#ifdef USB_HUB_DEBUG
-#define USB_HUB_PRINTF(fmt, args...) printf (fmt , ##args)
+#define USB_HUB_PRINTF(fmt, args...) printf(fmt , ##args)
#else
#define USB_HUB_PRINTF(fmt, args...)
#endif