summaryrefslogtreecommitdiff
path: root/common/miiphybb.c
diff options
context:
space:
mode:
Diffstat (limited to 'common/miiphybb.c')
-rw-r--r--common/miiphybb.c231
1 files changed, 231 insertions, 0 deletions
diff --git a/common/miiphybb.c b/common/miiphybb.c
new file mode 100644
index 00000000000..dfc19922b1f
--- /dev/null
+++ b/common/miiphybb.c
@@ -0,0 +1,231 @@
+/*
+ * (C) Copyright 2001
+ * Gerald Van Baren, Custom IDEAS, vanbaren@cideas.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * This provides a bit-banged interface to the ethernet MII management
+ * channel.
+ */
+
+#include <common.h>
+#include <ioports.h>
+#include <ppc_asm.tmpl>
+
+#ifdef CONFIG_BITBANGMII
+
+
+/*****************************************************************************
+ *
+ * Utility to send the preamble, address, and register (common to read
+ * and write).
+ */
+static void miiphy_pre(char read,
+ unsigned char addr,
+ unsigned char reg)
+{
+ int j; /* counter */
+ volatile ioport_t *iop = ioport_addr((immap_t *)CFG_IMMR, MDIO_PORT);
+
+ /*
+ * Send a 32 bit preamble ('1's) with an extra '1' bit for good measure.
+ * The IEEE spec says this is a PHY optional requirement. The AMD
+ * 79C874 requires one after power up and one after a MII communications
+ * error. This means that we are doing more preambles than we need,
+ * but it is safer and will be much more robust.
+ */
+
+ MDIO_ACTIVE;
+ MDIO(1);
+ for(j = 0; j < 32; j++)
+ {
+ MDC(0);
+ MIIDELAY;
+ MDC(1);
+ MIIDELAY;
+ }
+
+ /* send the start bit (01) and the read opcode (10) or write (10) */
+ MDC(0); MDIO(0); MIIDELAY; MDC(1); MIIDELAY;
+ MDC(0); MDIO(1); MIIDELAY; MDC(1); MIIDELAY;
+ MDC(0); MDIO(read); MIIDELAY; MDC(1); MIIDELAY;
+ MDC(0); MDIO(!read); MIIDELAY; MDC(1); MIIDELAY;
+
+ /* send the PHY address */
+ for(j = 0; j < 5; j++)
+ {
+ MDC(0);
+ if((addr & 0x10) == 0)
+ {
+ MDIO(0);
+ }
+ else
+ {
+ MDIO(1);
+ }
+ MIIDELAY;
+ MDC(1);
+ MIIDELAY;
+ addr <<= 1;
+ }
+
+ /* send the register address */
+ for(j = 0; j < 5; j++)
+ {
+ MDC(0);
+ if((reg & 0x10) == 0)
+ {
+ MDIO(0);
+ }
+ else
+ {
+ MDIO(1);
+ }
+ MIIDELAY;
+ MDC(1);
+ MIIDELAY;
+ reg <<= 1;
+ }
+}
+
+
+/*****************************************************************************
+ *
+ * Read a MII PHY register.
+ *
+ * Returns:
+ * 0 on success
+ */
+int miiphy_read(unsigned char addr,
+ unsigned char reg,
+ unsigned short *value)
+{
+ short rdreg; /* register working value */
+ int j; /* counter */
+ volatile ioport_t *iop = ioport_addr((immap_t *)CFG_IMMR, MDIO_PORT);
+
+ miiphy_pre(1, addr, reg);
+
+ /* tri-state our MDIO I/O pin so we can read */
+ MDC(0);
+ MDIO_TRISTATE;
+ MIIDELAY;
+ MDC(1);
+ MIIDELAY;
+
+ /* check the turnaround bit: the PHY should be driving it to zero */
+ if(MDIO_READ != 0)
+ {
+ /* printf("PHY didn't drive TA low\n"); */
+ for(j = 0; j < 32; j++)
+ {
+ MDC(0);
+ MIIDELAY;
+ MDC(1);
+ MIIDELAY;
+ }
+ return(-1);
+ }
+
+ MDC(0);
+ MIIDELAY;
+
+ /* read 16 bits of register data, MSB first */
+ rdreg = 0;
+ for(j = 0; j < 16; j++)
+ {
+ MDC(1);
+ MIIDELAY;
+ rdreg <<= 1;
+ rdreg |= MDIO_READ;
+ MDC(0);
+ MIIDELAY;
+ }
+
+ MDC(1);
+ MIIDELAY;
+ MDC(0);
+ MIIDELAY;
+ MDC(1);
+ MIIDELAY;
+
+ *value = rdreg;
+
+#ifdef DEBUG
+ printf ("miiphy_read(0x%x) @ 0x%x = 0x%04x\n", reg, addr, *value);
+#endif
+
+ return 0;
+}
+
+
+/*****************************************************************************
+ *
+ * Write a MII PHY register.
+ *
+ * Returns:
+ * 0 on success
+ */
+int miiphy_write(unsigned char addr,
+ unsigned char reg,
+ unsigned short value)
+{
+ int j; /* counter */
+ volatile ioport_t *iop = ioport_addr((immap_t *)CFG_IMMR, MDIO_PORT);
+
+ miiphy_pre(0, addr, reg);
+
+ /* send the turnaround (10) */
+ MDC(0); MDIO(1); MIIDELAY; MDC(1); MIIDELAY;
+ MDC(0); MDIO(0); MIIDELAY; MDC(1); MIIDELAY;
+
+ /* write 16 bits of register data, MSB first */
+ for(j = 0; j < 16; j++)
+ {
+ MDC(0);
+ if((value & 0x00008000) == 0)
+ {
+ MDIO(0);
+ }
+ else
+ {
+ MDIO(1);
+ }
+ MIIDELAY;
+ MDC(1);
+ MIIDELAY;
+ value <<= 1;
+ }
+
+ /*
+ * Tri-state the MDIO line.
+ */
+ MDIO_TRISTATE;
+ MDC(0);
+ MIIDELAY;
+ MDC(1);
+ MIIDELAY;
+
+ return 0;
+}
+
+#endif /* CONFIG_BITBANGMII */
+