summaryrefslogtreecommitdiff
path: root/board
diff options
context:
space:
mode:
Diffstat (limited to 'board')
-rw-r--r--board/cds/common/ft_board.c23
-rw-r--r--board/dbau1x00/u-boot.lds14
-rw-r--r--board/gth2/u-boot.lds14
-rw-r--r--board/incaip/u-boot.lds14
-rw-r--r--board/pb1x00/u-boot.lds14
-rw-r--r--board/purple/u-boot.lds14
-rw-r--r--board/tb0229/u-boot.lds14
-rw-r--r--board/tqm5200/cmd_stk52xx.c17
-rw-r--r--board/tqm5200/tqm5200.c2
-rw-r--r--board/tqm8xx/tqm8xx.c16
10 files changed, 78 insertions, 64 deletions
diff --git a/board/cds/common/ft_board.c b/board/cds/common/ft_board.c
index 9d97905ca9b..3eda1009efd 100644
--- a/board/cds/common/ft_board.c
+++ b/board/cds/common/ft_board.c
@@ -37,17 +37,24 @@ static void cds_pci_fixup(void *blob)
map = ft_get_prop(blob, "/" OF_SOC "/pci@8000/interrupt-map", &len);
- len /= sizeof(u32);
+ if (!map)
+ map = ft_get_prop(blob, "/" OF_PCI "/interrupt-map", &len);
- slot = get_pci_slot();
+ if (map) {
+ len /= sizeof(u32);
- for (i=0;i<len;i+=7) {
- /* We rotate the interrupt pins so that the mapping
- * changes depending on the slot the carrier card is in.
- */
- map[3] = ((map[3] + slot - 2) % 4) + 1;
+ slot = get_pci_slot();
- map+=7;
+ for (i=0;i<len;i+=7) {
+ /* We rotate the interrupt pins so that the mapping
+ * changes depending on the slot the carrier card is in.
+ */
+ map[3] = ((map[3] + slot - 2) % 4) + 1;
+
+ map+=7;
+ }
+ } else {
+ printf("*** Warning - No PCI node found\n");
}
}
#endif
diff --git a/board/dbau1x00/u-boot.lds b/board/dbau1x00/u-boot.lds
index 10c99179864..9639b81acc6 100644
--- a/board/dbau1x00/u-boot.lds
+++ b/board/dbau1x00/u-boot.lds
@@ -43,14 +43,14 @@ SECTIONS
. = ALIGN(4);
.data : { *(.data) }
- . = ALIGN(4);
- .sdata : { *(.sdata) }
-
- _gp = ALIGN(16);
+ . = .;
+ _gp = ALIGN(16) + 0x7ff0;
- __got_start = .;
- .got : { *(.got) }
- __got_end = .;
+ .got : {
+ __got_start = .;
+ *(.got)
+ __got_end = .;
+ }
.sdata : { *(.sdata) }
diff --git a/board/gth2/u-boot.lds b/board/gth2/u-boot.lds
index 8ba0b6d4c12..90432cb8887 100644
--- a/board/gth2/u-boot.lds
+++ b/board/gth2/u-boot.lds
@@ -43,14 +43,14 @@ SECTIONS
. = ALIGN(4);
.data : { *(.data) }
- . = ALIGN(4);
- .sdata : { *(.sdata) }
+ . = .;
+ _gp = ALIGN(16) + 0x7ff0;
- _gp = ALIGN(16);
-
- __got_start = .;
- .got : { *(.got) }
- __got_end = .;
+ .got : {
+ __got_start = .;
+ *(.got)
+ __got_end = .;
+ }
.sdata : { *(.sdata) }
diff --git a/board/incaip/u-boot.lds b/board/incaip/u-boot.lds
index 10c99179864..9639b81acc6 100644
--- a/board/incaip/u-boot.lds
+++ b/board/incaip/u-boot.lds
@@ -43,14 +43,14 @@ SECTIONS
. = ALIGN(4);
.data : { *(.data) }
- . = ALIGN(4);
- .sdata : { *(.sdata) }
-
- _gp = ALIGN(16);
+ . = .;
+ _gp = ALIGN(16) + 0x7ff0;
- __got_start = .;
- .got : { *(.got) }
- __got_end = .;
+ .got : {
+ __got_start = .;
+ *(.got)
+ __got_end = .;
+ }
.sdata : { *(.sdata) }
diff --git a/board/pb1x00/u-boot.lds b/board/pb1x00/u-boot.lds
index a2d19a84c9e..363d974c48f 100644
--- a/board/pb1x00/u-boot.lds
+++ b/board/pb1x00/u-boot.lds
@@ -43,14 +43,14 @@ SECTIONS
. = ALIGN(4);
.data : { *(.data) }
- . = ALIGN(4);
- .sdata : { *(.sdata) }
+ . = .;
+ _gp = ALIGN(16) + 0x7ff0;
- _gp = ALIGN(16);
-
- __got_start = .;
- .got : { *(.got) }
- __got_end = .;
+ .got : {
+ __got_start = .;
+ *(.got)
+ __got_end = .;
+ }
.sdata : { *(.sdata) }
diff --git a/board/purple/u-boot.lds b/board/purple/u-boot.lds
index 1bdac1f4a6f..e7ec012c3be 100644
--- a/board/purple/u-boot.lds
+++ b/board/purple/u-boot.lds
@@ -53,14 +53,14 @@ SECTIONS
. = ALIGN(4);
.data : { *(.data) }
- . = ALIGN(4);
- .sdata : { *(.sdata) }
-
- _gp = ALIGN(16);
+ . = .;
+ _gp = ALIGN(16) + 0x7ff0;
- __got_start = .;
- .got : { *(.got) }
- __got_end = .;
+ .got : {
+ __got_start = .;
+ *(.got)
+ __got_end = .;
+ }
.sdata : { *(.sdata) }
diff --git a/board/tb0229/u-boot.lds b/board/tb0229/u-boot.lds
index 30a2bc57eac..b2fa9f22dc9 100644
--- a/board/tb0229/u-boot.lds
+++ b/board/tb0229/u-boot.lds
@@ -43,14 +43,14 @@ SECTIONS
. = ALIGN(4);
.data : { *(.data) }
- . = ALIGN(4);
- .sdata : { *(.sdata) }
-
- _gp = ALIGN(16);
+ . = .;
+ _gp = ALIGN(16) + 0x7ff0;
- __got_start = .;
- .got : { *(.got) }
- __got_end = .;
+ .got : {
+ __got_start = .;
+ *(.got)
+ __got_end = .;
+ }
.sdata : { *(.sdata) }
diff --git a/board/tqm5200/cmd_stk52xx.c b/board/tqm5200/cmd_stk52xx.c
index b746679afaa..27a6c4163de 100644
--- a/board/tqm5200/cmd_stk52xx.c
+++ b/board/tqm5200/cmd_stk52xx.c
@@ -561,7 +561,7 @@ void led_init(void)
gpt->gpt6.emsr |= 0x00000024;
gpt->gpt7.emsr |= 0x00000024;
-
+#ifndef CONFIG_TQM5200S
/* enable SM501 GPIO control (in both power modes) */
*(vu_long *) (SM501_MMIO_BASE+SM501_POWER_MODE0_GATE) |=
POWER_MODE_GATE_GPIO_PWM_I2C;
@@ -574,6 +574,7 @@ void led_init(void)
/* configure SM501 gpio pins 48-51 as output */
*(vu_long *) (SM501_MMIO_BASE+SM501_GPIO_DATA_DIR_HIGH) |= (0xF << 16);
+#endif /* !CONFIG_TQM5200S */
}
/*
@@ -650,7 +651,7 @@ int do_led(char *argv[])
gpt->gpt7.emsr &= ~(1 << 4);
}
break;
-
+#ifndef CONFIG_TQM5200S
case 24:
if (strcmp (argv[3], "on") == 0) {
*(vu_long *) (SM501_MMIO_BASE+SM501_GPIO_DATA_LOW) |=
@@ -730,7 +731,7 @@ int do_led(char *argv[])
~(0x1 << 19);
}
break;
-
+#endif /* !CONFIG_TQM5200S */
default:
printf ("%s: invalid led number %s\n", __FUNCTION__, argv[2]);
return 1;
@@ -1110,7 +1111,7 @@ int do_rs232(char *argv[])
return error_status;
}
-#ifndef CONFIG_FO300
+#if !defined(CONFIG_FO300) && !defined(CONFIG_TQM5200S)
static void sm501_backlight (unsigned int state)
{
if (state == BL_ON) {
@@ -1120,7 +1121,7 @@ static void sm501_backlight (unsigned int state)
*(vu_long *)(SM501_MMIO_BASE+SM501_PANEL_DISPLAY_CONTROL) &=
~((1 << 26) | (1 << 27));
}
-#endif
+#endif /* !CONFIG_FO300 & !CONFIG_TQM5200S */
int cmd_fkt(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
@@ -1160,7 +1161,7 @@ int cmd_fkt(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
else
printf ("Error\n");
return rcode;
-#ifndef CONFIG_FO300
+#if !defined(CONFIG_FO300) && !defined(CONFIG_TQM5200S)
} else if (strncmp (argv[1], "backlight", 4) == 0) {
if (strncmp (argv[2], "on", 2) == 0) {
sm501_backlight (BL_ON);
@@ -1170,7 +1171,7 @@ int cmd_fkt(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
sm501_backlight (BL_OFF);
return 0;
}
-#endif
+#endif /* !CONFIG_FO300 & !CONFIG_TQM5200S */
}
break;
@@ -1228,8 +1229,10 @@ U_BOOT_CMD(
" - loopback plug for X83 required\n"
"fkt rs232 number\n"
" - loopback plug(s) for X2 required\n"
+#ifndef CONFIG_TQM5200S
"fkt backlight on/off\n"
" - switch backlight on or off\n"
+#endif /* !CONFIG_TQM5200S */
);
#elif defined(CONFIG_FO300)
U_BOOT_CMD(
diff --git a/board/tqm5200/tqm5200.c b/board/tqm5200/tqm5200.c
index 29d6f00427f..d10cb5937d6 100644
--- a/board/tqm5200/tqm5200.c
+++ b/board/tqm5200/tqm5200.c
@@ -543,6 +543,7 @@ int last_stage_init (void)
__asm__ volatile ("sync");
}
+#ifndef CONFIG_TQM5200S /* The TQM5200S has no SM501 grafic controller */
/*
* Check for Grafic Controller
*/
@@ -586,6 +587,7 @@ int last_stage_init (void)
#endif
return 0;
+#endif /* !CONFIG_TQM5200S */
}
#ifdef CONFIG_VIDEO_SM501
diff --git a/board/tqm8xx/tqm8xx.c b/board/tqm8xx/tqm8xx.c
index 6b206f8a184..cebdcc07649 100644
--- a/board/tqm8xx/tqm8xx.c
+++ b/board/tqm8xx/tqm8xx.c
@@ -354,6 +354,8 @@ long int initdram (int board_type)
udelay (10000);
#ifdef CONFIG_CAN_DRIVER
+ /* UPM initialization for CAN @ CLKOUT <= 66 MHz */
+
/* Initialize OR3 / BR3 */
memctl->memc_or3 = CFG_OR3_CAN;
memctl->memc_br3 = CFG_BR3_CAN;
@@ -362,7 +364,7 @@ long int initdram (int board_type)
memctl->memc_mbmr = MBMR_GPL_B4DIS; /* GPL_B4 ouput line Disable */
/* Initialize UPMB for CAN: single read */
- memctl->memc_mdr = 0xFFFFC004;
+ memctl->memc_mdr = 0xFFFFCC04;
memctl->memc_mcr = 0x0100 | UPMB;
memctl->memc_mdr = 0x0FFFD004;
@@ -374,23 +376,23 @@ long int initdram (int board_type)
memctl->memc_mdr = 0x3FFFC004;
memctl->memc_mcr = 0x0103 | UPMB;
- memctl->memc_mdr = 0xFFFFDC05;
+ memctl->memc_mdr = 0xFFFFDC07;
memctl->memc_mcr = 0x0104 | UPMB;
/* Initialize UPMB for CAN: single write */
- memctl->memc_mdr = 0xFFFCC004;
+ memctl->memc_mdr = 0xFFFCCC04;
memctl->memc_mcr = 0x0118 | UPMB;
- memctl->memc_mdr = 0xCFFCD004;
+ memctl->memc_mdr = 0xCFFCDC04;
memctl->memc_mcr = 0x0119 | UPMB;
- memctl->memc_mdr = 0x0FFCC000;
+ memctl->memc_mdr = 0x3FFCC000;
memctl->memc_mcr = 0x011A | UPMB;
- memctl->memc_mdr = 0x7FFCC004;
+ memctl->memc_mdr = 0xFFFCC004;
memctl->memc_mcr = 0x011B | UPMB;
- memctl->memc_mdr = 0xFFFDCC05;
+ memctl->memc_mdr = 0xFFFDC405;
memctl->memc_mcr = 0x011C | UPMB;
#endif /* CONFIG_CAN_DRIVER */
generated by cgit v1.2.3 (git 2.0.4) at 2024-09-20 06:23:49 +0000