diff options
Diffstat (limited to 'board')
| -rw-r--r-- | board/amcc/sequoia/sequoia.c | 58 |
1 files changed, 29 insertions, 29 deletions
diff --git a/board/amcc/sequoia/sequoia.c b/board/amcc/sequoia/sequoia.c index f81f07146da..37b4f31b908 100644 --- a/board/amcc/sequoia/sequoia.c +++ b/board/amcc/sequoia/sequoia.c @@ -48,31 +48,31 @@ int board_early_init_f(void) * Setup the GPIO pins *-------------------------------------------------------------------*/ /* test-only: take GPIO init from pcs440ep ???? in config file */ - out32(GPIO0_OR, 0x00000000); - out32(GPIO0_TCR, 0x0000000f); - out32(GPIO0_OSRL, 0x50015400); - out32(GPIO0_OSRH, 0x550050aa); - out32(GPIO0_TSRL, 0x50015400); - out32(GPIO0_TSRH, 0x55005000); - out32(GPIO0_ISR1L, 0x50000000); - out32(GPIO0_ISR1H, 0x00000000); - out32(GPIO0_ISR2L, 0x00000000); - out32(GPIO0_ISR2H, 0x00000100); - out32(GPIO0_ISR3L, 0x00000000); - out32(GPIO0_ISR3H, 0x00000000); - - out32(GPIO1_OR, 0x00000000); - out32(GPIO1_TCR, 0xc2000000); - out32(GPIO1_OSRL, 0x5c280000); - out32(GPIO1_OSRH, 0x00000000); - out32(GPIO1_TSRL, 0x0c000000); - out32(GPIO1_TSRH, 0x00000000); - out32(GPIO1_ISR1L, 0x00005550); - out32(GPIO1_ISR1H, 0x00000000); - out32(GPIO1_ISR2L, 0x00050000); - out32(GPIO1_ISR2H, 0x00000000); - out32(GPIO1_ISR3L, 0x01400000); - out32(GPIO1_ISR3H, 0x00000000); + out_be32((u32 *) GPIO0_OR, 0x00000000); + out_be32((u32 *) GPIO0_TCR, 0x0000000f); + out_be32((u32 *) GPIO0_OSRL, 0x50015400); + out_be32((u32 *) GPIO0_OSRH, 0x550050aa); + out_be32((u32 *) GPIO0_TSRL, 0x50015400); + out_be32((u32 *) GPIO0_TSRH, 0x55005000); + out_be32((u32 *) GPIO0_ISR1L, 0x50000000); + out_be32((u32 *) GPIO0_ISR1H, 0x00000000); + out_be32((u32 *) GPIO0_ISR2L, 0x00000000); + out_be32((u32 *) GPIO0_ISR2H, 0x00000100); + out_be32((u32 *) GPIO0_ISR3L, 0x00000000); + out_be32((u32 *) GPIO0_ISR3H, 0x00000000); + + out_be32((u32 *) GPIO1_OR, 0x00000000); + out_be32((u32 *) GPIO1_TCR, 0xc2000000); + out_be32((u32 *) GPIO1_OSRL, 0x5c280000); + out_be32((u32 *) GPIO1_OSRH, 0x00000000); + out_be32((u32 *) GPIO1_TSRL, 0x0c000000); + out_be32((u32 *) GPIO1_TSRH, 0x00000000); + out_be32((u32 *) GPIO1_ISR1L, 0x00005550); + out_be32((u32 *) GPIO1_ISR1H, 0x00000000); + out_be32((u32 *) GPIO1_ISR2L, 0x00050000); + out_be32((u32 *) GPIO1_ISR2H, 0x00000000); + out_be32((u32 *) GPIO1_ISR3L, 0x01400000); + out_be32((u32 *) GPIO1_ISR3H, 0x00000000); /*-------------------------------------------------------------------- * Setup the interrupt controller polarities, triggers, etc. @@ -102,16 +102,16 @@ int board_early_init_f(void) mtdcr(uic2sr, 0xffffffff); /* clear all */ /* 50MHz tmrclk */ - *(unsigned char *)(CFG_BCSR_BASE | 0x04) = 0x00; + out_8((u8 *) CFG_BCSR_BASE + 0x04, 0x00); /* clear write protects */ - *(unsigned char *)(CFG_BCSR_BASE | 0x07) = 0x00; + out_8((u8 *) CFG_BCSR_BASE + 0x07, 0x00); /* enable Ethernet */ - *(unsigned char *)(CFG_BCSR_BASE | 0x08) = 0x00; + out_8((u8 *) CFG_BCSR_BASE + 0x08, 0x00); /* enable USB device */ - *(unsigned char *)(CFG_BCSR_BASE | 0x09) = 0x20; + out_8((u8 *) CFG_BCSR_BASE + 0x09, 0x20); /* select Ethernet pins */ mfsdr(SDR0_PFC1, sdr0_pfc1); |