summaryrefslogtreecommitdiff
path: root/board
diff options
context:
space:
mode:
Diffstat (limited to 'board')
-rw-r--r--board/cmc_pu2/flash.c5
-rw-r--r--board/cpc45/Makefile2
-rw-r--r--board/cpc45/cpc45.c40
-rw-r--r--board/cpc45/pd67290.c68
-rw-r--r--board/esd/cpci750/cpci750.c24
-rw-r--r--board/esd/cpci750/local.h2
-rw-r--r--board/esd/pci405/pci405.c2
-rw-r--r--board/evb64260/local.h2
-rw-r--r--board/jse/host_bridge.c2
-rw-r--r--board/pn62/pn62.c2
-rw-r--r--board/xilinx/xilinx_iic/iic_adapter.c5
11 files changed, 133 insertions, 21 deletions
diff --git a/board/cmc_pu2/flash.c b/board/cmc_pu2/flash.c
index 846a2e6bf13..9983c7b78c0 100644
--- a/board/cmc_pu2/flash.c
+++ b/board/cmc_pu2/flash.c
@@ -264,7 +264,7 @@ int flash_erase (flash_info_t *info, int s_first, int s_last)
{
vu_short *addr = (vu_short *)(info->start[0]);
int flag, prot, sect, ssect, l_sect;
- ulong start, now, last;
+ ulong now, last;
debug ("flash_erase: first: %d last: %d\n", s_first, s_last);
@@ -336,7 +336,7 @@ int flash_erase (flash_info_t *info, int s_first, int s_last)
goto DONE;
reset_timer_masked ();
- last = start;
+ last = 0;
addr = (vu_short *)(info->start[l_sect]);
while ((addr[0] & 0x0080) != 0x0080) {
if ((now = get_timer_masked ()) > CFG_FLASH_ERASE_TOUT) {
@@ -432,7 +432,6 @@ printf ("write_buff 1: write_word_amd() rc=%d\n", rc);
*/
static int write_word_amd (flash_info_t *info, vu_short *dest, ushort data)
{
- ulong start;
int flag;
vu_short *base; /* first address in flash bank */
diff --git a/board/cpc45/Makefile b/board/cpc45/Makefile
index db5a83b70d7..ccb811bd4d1 100644
--- a/board/cpc45/Makefile
+++ b/board/cpc45/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
LIB = lib$(BOARD).a
-OBJS = $(BOARD).o flash.o plx9030.o
+OBJS = $(BOARD).o flash.o plx9030.o pd67290.o
$(LIB): .depend $(OBJS)
$(AR) crv $@ $(OBJS)
diff --git a/board/cpc45/cpc45.c b/board/cpc45/cpc45.c
index 92ccd42e7f7..51b0085911b 100644
--- a/board/cpc45/cpc45.c
+++ b/board/cpc45/cpc45.c
@@ -24,11 +24,13 @@
#include <common.h>
#include <mpc824x.h>
#include <asm/processor.h>
+#include <asm/io.h>
#include <pci.h>
#include <i2c.h>
int sysControlDisplay(int digit, uchar ascii_code);
extern void Plx9030Init(void);
+extern void SPD67290Init(void);
/* We have to clear the initial data area here. Couldn't have done it
* earlier because DRAM had not been initialized.
@@ -180,6 +182,10 @@ static struct pci_config_table pci_cpc45_config_table[] = {
pci_cfgfunc_config_device, { PCI_PLX9030_IOADDR,
PCI_PLX9030_MEMADDR,
PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER }},
+ { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x0E, PCI_ANY_ID,
+ pci_cfgfunc_config_device, { PCMCIA_IO_BASE,
+ PCMCIA_IO_BASE,
+ PCI_COMMAND_MEMORY | PCI_COMMAND_IO }},
#endif /*CONFIG_PCI_PNP*/
{ }
};
@@ -233,3 +239,37 @@ int sysControlDisplay (int digit, /* number of digit 0..7 */
return (0);
}
+
+#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
+
+#ifdef CFG_PCMCIA_MEM_ADDR
+volatile unsigned char *pcmcia_mem = (unsigned char*)CFG_PCMCIA_MEM_ADDR;
+#endif
+
+int pcmcia_init(void)
+{
+ u_int rc;
+
+ debug ("Enable PCMCIA " PCMCIA_SLOT_MSG "\n");
+
+ rc = i82365_init();
+
+ return rc;
+}
+
+#endif /* CFG_CMD_PCMCIA */
+
+# ifdef CONFIG_IDE_LED
+void ide_led (uchar led, uchar status)
+{
+ u_char val;
+ /* We have one PCMCIA slot and use LED H4 for the IDE Interface */
+ val = readb(BCSR_BASE + 0x04);
+ if (status) { /* led on */
+ val |= B_CTRL_LED0;
+ } else {
+ val &= ~B_CTRL_LED0;
+ }
+ writeb(val, BCSR_BASE + 0x04);
+}
+# endif
diff --git a/board/cpc45/pd67290.c b/board/cpc45/pd67290.c
new file mode 100644
index 00000000000..c84fbae918e
--- /dev/null
+++ b/board/cpc45/pd67290.c
@@ -0,0 +1,68 @@
+/* pd67290.c - system configuration module for SPD67290
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * (C) 2004 DENX Software Engineering, Heiko Schocher <hs@denx.de>
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <net.h>
+#include <asm/io.h>
+#include <pci.h>
+
+/* imports */
+#include <mpc824x.h>
+
+static struct pci_device_id supported[] = {
+ {PCI_VENDOR_ID_CIRRUS, PCI_DEVICE_ID_CIRRUS_6729},
+ {}
+};
+
+/***************************************************************************
+*
+* SPD67290Init -
+*
+* RETURNS: -1 on error, 0 if OK
+*/
+
+int SPD67290Init (void)
+{
+ pci_dev_t devno;
+ int idx = 0; /* general index */
+ ulong membaseCsr; /* base address of device memory space */
+
+ /* find PD67290 device */
+ if ((devno = pci_find_devices (supported, idx++)) < 0) {
+ printf ("No PD67290 device found !!\n");
+ return -1;
+ }
+ /* - 0xfe000000 see MPC 8245 Users Manual Adress Map B */
+ membaseCsr = PCMCIA_IO_BASE - 0xfe000000;
+
+ /* set base address */
+ pci_write_config_dword (devno, PCI_BASE_ADDRESS_0, membaseCsr);
+
+ /* enable mapped memory and IO addresses */
+ pci_write_config_dword (devno,
+ PCI_COMMAND,
+ PCI_COMMAND_MEMORY |
+ PCI_COMMAND_IO | PCI_COMMAND_WAIT);
+ return 0;
+}
diff --git a/board/esd/cpci750/cpci750.c b/board/esd/cpci750/cpci750.c
index 56c12d7317d..68f121d6bfc 100644
--- a/board/esd/cpci750/cpci750.c
+++ b/board/esd/cpci750/cpci750.c
@@ -494,18 +494,18 @@ static void move64 (unsigned long long *src, unsigned long long *dest)
#if defined (CFG_DRAM_TEST_DATA)
unsigned long long pattern[] = {
- 0xaaaaaaaaaaaaaaaa,
- 0xcccccccccccccccc,
- 0xf0f0f0f0f0f0f0f0,
- 0xff00ff00ff00ff00,
- 0xffff0000ffff0000,
- 0xffffffff00000000,
- 0x00000000ffffffff,
- 0x0000ffff0000ffff,
- 0x00ff00ff00ff00ff,
- 0x0f0f0f0f0f0f0f0f,
- 0x3333333333333333,
- 0x5555555555555555
+ 0xaaaaaaaaaaaaaaaaLL,
+ 0xccccccccccccccccLL,
+ 0xf0f0f0f0f0f0f0f0LL,
+ 0xff00ff00ff00ff00LL,
+ 0xffff0000ffff0000LL,
+ 0xffffffff00000000LL,
+ 0x00000000ffffffffLL,
+ 0x0000ffff0000ffffLL,
+ 0x00ff00ff00ff00ffLL,
+ 0x0f0f0f0f0f0f0f0fLL,
+ 0x3333333333333333LL,
+ 0x5555555555555555LL,
};
/*********************************************************************/
diff --git a/board/esd/cpci750/local.h b/board/esd/cpci750/local.h
index 47ab31e9089..bca0e1ff506 100644
--- a/board/esd/cpci750/local.h
+++ b/board/esd/cpci750/local.h
@@ -76,7 +76,9 @@
#define CONFIG_ETHADDR 64:36:00:00:00:01
/* next two ethernet hwaddrs */
+#define CONFIG_HAS_ETH1
#define CONFIG_ETH1ADDR 86:06:2d:7e:c6:54
+#define CONFIG_HAS_ETH2
#define CONFIG_ETH2ADDR 86:06:2d:7e:c6:55
#define CONFIG_ENV_OVERWRITE
diff --git a/board/esd/pci405/pci405.c b/board/esd/pci405/pci405.c
index 80d6dbb234f..cb458ebc475 100644
--- a/board/esd/pci405/pci405.c
+++ b/board/esd/pci405/pci405.c
@@ -306,7 +306,7 @@ int misc_init_r (void)
/* mtspr(ccr0, (mfspr(ccr0) & 0xff8fffff) | 0x00100000); */
mtspr(ccr0, (mfspr(ccr0) & 0xff8fffff) | 0x00000000);
#endif
- /* printf("CCR0=%08x\n", mfspr(ccr0));*/ /* test-only */
+/* printf("CCR0=%08x\n", mfspr(ccr0)); */ /* test-only */
#endif
free(dst);
diff --git a/board/evb64260/local.h b/board/evb64260/local.h
index 6d1fb4cdab1..3d9b443e7b8 100644
--- a/board/evb64260/local.h
+++ b/board/evb64260/local.h
@@ -53,7 +53,9 @@
#define CONFIG_ETHADDR 00:11:22:33:44:55
/* next two ethernet hwaddrs */
+#define CONFIG_HAS_ETH1
#define CONFIG_ETH1ADDR 00:11:22:33:44:66
+#define CONFIG_HAS_ETH2
#define CONFIG_ETH2ADDR 00:11:22:33:44:77
#define CONFIG_ENV_OVERWRITE
diff --git a/board/jse/host_bridge.c b/board/jse/host_bridge.c
index 11c41bdada7..363be97a591 100644
--- a/board/jse/host_bridge.c
+++ b/board/jse/host_bridge.c
@@ -39,8 +39,6 @@ void host_bridge_init (void)
/* The bridge chip is at a fixed location. */
pci_dev_t dev = PCI_BDF (0, 10, 0);
- int rc;
-
/* Set PCI Class code --
The primary side sees this class code at 0x08 in the
primary config space. This must be something other then a
diff --git a/board/pn62/pn62.c b/board/pn62/pn62.c
index c0111dcd921..025224027e8 100644
--- a/board/pn62/pn62.c
+++ b/board/pn62/pn62.c
@@ -145,11 +145,13 @@ int misc_init_r (void)
}
show_startup_phase (10);
+#ifdef CONFIG_HAS_ETH1
if (getenv ("eth1addr") == NULL &&
get_mac_address (1, mac, str, sizeof (str)) > 0) {
setenv ("eth1addr", str);
memcpy (gd->bd->bi_enet1addr, mac, 6);
}
+#endif /* CONFIG_HAS_ETH1 */
show_startup_phase (11);
/* Tell everybody that U-Boot is up and runnig */
diff --git a/board/xilinx/xilinx_iic/iic_adapter.c b/board/xilinx/xilinx_iic/iic_adapter.c
index 8ddba6ade2d..0b7de7b997d 100644
--- a/board/xilinx/xilinx_iic/iic_adapter.c
+++ b/board/xilinx/xilinx_iic/iic_adapter.c
@@ -328,8 +328,9 @@ convert_env(void)
s = getenv("E");
if (s != NULL) {
sprintf(temp, "%c%c.%c%c.%c%c.%c%c.%c%c.%c%c",
- *s++, *s++, *s++, *s++, *s++, *s++,
- *s++, *s++, *s++, *s++, *s++, *s);
+ s[0], s[1], s[ 2], s[ 3],
+ s[4], s[5], s[ 6], s[ 7],
+ s[8], s[9], s[10], s[11] );
setenv("ethaddr", temp);
setenv("E", NULL);
}