diff options
Diffstat (limited to 'board')
| -rw-r--r-- | board/icecube/icecube.c | 12 | ||||
| -rw-r--r-- | board/mpc8349emds/mpc8349emds.c | 22 | ||||
| -rw-r--r-- | board/mx1ads/mx1ads.c | 2 |
3 files changed, 18 insertions, 18 deletions
diff --git a/board/icecube/icecube.c b/board/icecube/icecube.c index 4197a7c521..4f056b2fa4 100644 --- a/board/icecube/icecube.c +++ b/board/icecube/icecube.c @@ -187,17 +187,17 @@ long int initdram (int board_type) #endif /* CFG_RAMBOOT */ /* - * On MPC5200B we need to set the special configuration delay in the - * DDR controller. Please refer to Freescale's AN3221 "MPC5200B SDRAM + * On MPC5200B we need to set the special configuration delay in the + * DDR controller. Please refer to Freescale's AN3221 "MPC5200B SDRAM * Initialization and Configuration", 3.3.1 SDelay--MBAR + 0x0190: * - * "The SDelay should be written to a value of 0x00000004. It is - * required to account for changes caused by normal wafer processing + * "The SDelay should be written to a value of 0x00000004. It is + * required to account for changes caused by normal wafer processing * parameters." - */ + */ svr = get_svr(); pvr = get_pvr(); - if ((SVR_MJREV(svr) >= 2) && + if ((SVR_MJREV(svr) >= 2) && (PVR_MAJ(pvr) == 1) && (PVR_MIN(pvr) == 4)) { *(vu_long *)MPC5XXX_SDRAM_SDELAY = 0x04; diff --git a/board/mpc8349emds/mpc8349emds.c b/board/mpc8349emds/mpc8349emds.c index 73a33f68ce..7ece7db7d0 100644 --- a/board/mpc8349emds/mpc8349emds.c +++ b/board/mpc8349emds/mpc8349emds.c @@ -116,14 +116,14 @@ int fixed_sdram(void) im->ddr.csbnds[2].csbnds = 0x0000000f; im->ddr.cs_config[2] = CFG_DDR_CONFIG; - /* currently we use only one CS, so disable the other banks */ + /* currently we use only one CS, so disable the other banks */ im->ddr.cs_config[0] = 0; im->ddr.cs_config[1] = 0; im->ddr.cs_config[3] = 0; im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1; im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2; - + im->ddr.sdram_cfg = SDRAM_CFG_SREN #if defined(CONFIG_DDR_2T_TIMING) @@ -136,7 +136,7 @@ int fixed_sdram(void) #endif im->ddr.sdram_mode = CFG_DDR_MODE; - im->ddr.sdram_interval = CFG_DDR_INTERVAL; + im->ddr.sdram_interval = CFG_DDR_INTERVAL; udelay(200); /* enable DDR controller */ @@ -361,12 +361,12 @@ int do_ecc ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) volatile u32 val; u64 *addr, count, val64; register u64 *i; - + if (argc > 4) { printf ("Usage:\n%s\n", cmdtp->usage); return 1; } - + if (argc == 2) { if (strcmp(argv[1], "status") == 0) { ecc_print_status(); @@ -379,8 +379,8 @@ int do_ecc ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) ddr->capture_attributes = 0; return 0; } - } - + } + if (argc == 3) { if (strcmp(argv[1], "sbecnt") == 0) { val = simple_strtoul(argv[2], NULL, 10); @@ -416,8 +416,8 @@ int do_ecc ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } else if (strcmp(argv[2], "+mse") == 0) { val |= ECC_ERROR_DISABLE_MSED; } else if (strcmp(argv[2], "+all") == 0) { - val |= (ECC_ERROR_DISABLE_SBED | - ECC_ERROR_DISABLE_MBED | + val |= (ECC_ERROR_DISABLE_SBED | + ECC_ERROR_DISABLE_MBED | ECC_ERROR_DISABLE_MSED); } else if (strcmp(argv[2], "-sbe") == 0) { val &= ~ECC_ERROR_DISABLE_SBED; @@ -426,8 +426,8 @@ int do_ecc ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } else if (strcmp(argv[2], "-mse") == 0) { val &= ~ECC_ERROR_DISABLE_MSED; } else if (strcmp(argv[2], "-all") == 0) { - val &= ~(ECC_ERROR_DISABLE_SBED | - ECC_ERROR_DISABLE_MBED | + val &= ~(ECC_ERROR_DISABLE_SBED | + ECC_ERROR_DISABLE_MBED | ECC_ERROR_DISABLE_MSED); } else { printf("Incorrect err_disable field\n"); diff --git a/board/mx1ads/mx1ads.c b/board/mx1ads/mx1ads.c index 913f95c5e8..abf2fd51e9 100644 --- a/board/mx1ads/mx1ads.c +++ b/board/mx1ads/mx1ads.c @@ -85,7 +85,7 @@ int board_init (void) GPCR = 0x000003AB; /* I/O pad driving strength */ - /* MX1_CS1U = 0x00000A00; *//* SRAM initialization */ + /* MX1_CS1U = 0x00000A00; */ /* SRAM initialization */ /* MX1_CS1L = 0x11110601; */ MPCTL0 = 0x04632410; /* setting for 150 MHz MCU PLL CLK */ |