summaryrefslogtreecommitdiff
path: root/board
diff options
context:
space:
mode:
Diffstat (limited to 'board')
-rw-r--r--board/LEOX/elpt860/README.LEOX1
-rw-r--r--board/palmtreo680/README17
-rw-r--r--board/sandpoint/README2
-rw-r--r--board/siemens/rut/board.c4
4 files changed, 0 insertions, 24 deletions
diff --git a/board/LEOX/elpt860/README.LEOX b/board/LEOX/elpt860/README.LEOX
index fe3c0f1528..aa41ff8fd2 100644
--- a/board/LEOX/elpt860/README.LEOX
+++ b/board/LEOX/elpt860/README.LEOX
@@ -46,7 +46,6 @@ U-Boot, at the address of 0x03000000.
=============================================================================
-
##################################################
# Operation on the serial console (SMC1)
##############################
diff --git a/board/palmtreo680/README b/board/palmtreo680/README
index 46828eb84f..c8799c6ab1 100644
--- a/board/palmtreo680/README
+++ b/board/palmtreo680/README
@@ -30,7 +30,6 @@ go wrong, but please tell me what happened exactly. For that matter, I'd love
to hear from you if you succeed.
-
Details on the SPL
==================
@@ -51,7 +50,6 @@ IPL has already loaded to its correct SDRAM address, and then loads the
remainder of u-boot and jumps to it.
-
The docg4's "reliable mode"
===========================
@@ -79,7 +77,6 @@ module parameter), but not reading. However, the u-boot docg4_spl driver does
read in reliable mode, in the same fashion as the IPL.
-
Details on the IPL and its data format
======================================
@@ -105,7 +102,6 @@ For the sake of simplicity and uniformity, the u-boot SPL mimics the operation
of the IPL, and expects the image to be stored in the same format.
-
Instructions on Programming u-boot to flash
===========================================
@@ -117,7 +113,6 @@ remainder of this document describes in detail how to program u-boot to the
flash using Linux running on the Treo.
-
Hardware Prerequisites
======================
@@ -136,7 +131,6 @@ A Linux desktop PC.
to flash, you'll really want to use a Linux PC.
-
Treo-side Software Prerequisites
================================
@@ -152,7 +146,6 @@ Linux bootloader for PalmOS:
parameters passed to the kernel.
-
Linux kernel:
The kernel on the Treo 680 is still a little rough around the edges, and the
@@ -200,7 +193,6 @@ Linux kernel:
and /dev/mtd2 for these partitions, respectively. Ensure that your root file
system at least has /dev/mtd1 if you are not running udev or mdev.
-
Userspace Utilities:
In addition to everything necessary to provide a useful userspace environment
@@ -221,19 +213,16 @@ Userspace Utilities:
from the mtd-utils package.
-
Desktop PC-side Software Prerequisites
======================================
Terminal emulator application:
minicom, kermit, etc.
-
Linux kernel:
Compiled with CONFIG_USB_SERIAL enabled. Build this as a module.
-
Recommended (Not directly related to u-boot)
============================================
@@ -275,7 +264,6 @@ configure the usb0 interface on the desktop.) Use the nfs 'nolock' option when
mounting to avoid the need to run a portmapper like rpcbind.
-
Preliminaries
=============
@@ -397,7 +385,6 @@ forget to copy the file to permanent storage, such as an mmc card.
If all of the above went well, you can now program u-boot.
-
Programming u-boot
==================
@@ -438,7 +425,6 @@ four blocks in /dev/mtd1; i.e., at offsets 0x00000, 0x40000, 0x80000, 0xc0000.
Shutdown linux, remove and re-insert the battery, hold your breath...
-
Enjoying u-boot
===============
@@ -478,7 +464,6 @@ support for reliable mode in u-boot's docg4 flash driver. This should be
corrected soon.
-
Customizing
===========
@@ -511,7 +496,6 @@ in flash did not seem worth the cost of a 256k flash block. But adding this
should be straightforward.
-
Restoring PalmOS
================
@@ -568,7 +552,6 @@ modprobe docg4 ignore_badblocks=1 || exit 1
dd if=$1 bs=1 skip=$file_ofs count=540672 | nandwrite -o -n -s 0x80000 $2 - || exit 1
modprobe -r docg4
-
TODO
====
diff --git a/board/sandpoint/README b/board/sandpoint/README
index a2e0831f33..c9996a8c06 100644
--- a/board/sandpoint/README
+++ b/board/sandpoint/README
@@ -15,8 +15,6 @@ tkoeller@gmx.net.
Thomas Koeller
-
-
The port was tested on a Sandpoint 8240 X3 board, with U-Boot
installed in the flash memory of the CPU card. Please use the
following DIP switch settings:
diff --git a/board/siemens/rut/board.c b/board/siemens/rut/board.c
index f2b0476817..5de8fc6cbf 100644
--- a/board/siemens/rut/board.c
+++ b/board/siemens/rut/board.c
@@ -328,8 +328,6 @@ static int get_clk(struct dpll_regs *dpll_regs)
return f;
};
-
-
int clk_get(int clk)
{
return get_clk(&dpll_lcd_regs);
@@ -426,7 +424,5 @@ static int board_video_init(void)
return 0;
}
-
-
#endif /* ifdef CONFIG_VIDEO */
#include "../common/board.c"