diff options
Diffstat (limited to 'board')
-rw-r--r-- | board/LaCie/wireless_space/Kconfig | 12 | ||||
-rw-r--r-- | board/LaCie/wireless_space/MAINTAINERS | 6 | ||||
-rw-r--r-- | board/LaCie/wireless_space/Makefile | 12 | ||||
-rw-r--r-- | board/LaCie/wireless_space/kwbimage.cfg | 71 | ||||
-rw-r--r-- | board/LaCie/wireless_space/wireless_space.c | 165 |
5 files changed, 0 insertions, 266 deletions
diff --git a/board/LaCie/wireless_space/Kconfig b/board/LaCie/wireless_space/Kconfig deleted file mode 100644 index 75a2fc5a756..00000000000 --- a/board/LaCie/wireless_space/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_WIRELESS_SPACE - -config SYS_BOARD - default "wireless_space" - -config SYS_VENDOR - default "LaCie" - -config SYS_CONFIG_NAME - default "wireless_space" - -endif diff --git a/board/LaCie/wireless_space/MAINTAINERS b/board/LaCie/wireless_space/MAINTAINERS deleted file mode 100644 index c32ecb8b73c..00000000000 --- a/board/LaCie/wireless_space/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -WIRELESS_SPACE BOARD -M: Albert ARIBAUD <albert.u.boot@aribaud.net> -S: Maintained -F: board/LaCie/wireless_space/ -F: include/configs/wireless_space.h -F: configs/wireless_space_defconfig diff --git a/board/LaCie/wireless_space/Makefile b/board/LaCie/wireless_space/Makefile deleted file mode 100644 index 90a84f48926..00000000000 --- a/board/LaCie/wireless_space/Makefile +++ /dev/null @@ -1,12 +0,0 @@ -# -# Copyright (C) 2011 Simon Guinot <sguinot@lacie.com> -# -# Based on Kirkwood support: -# (C) Copyright 2009 -# Marvell Semiconductor <www.marvell.com> -# Written-by: Prafulla Wadaskar <prafulla@marvell.com> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := wireless_space.o ../common/common.o diff --git a/board/LaCie/wireless_space/kwbimage.cfg b/board/LaCie/wireless_space/kwbimage.cfg deleted file mode 100644 index 037248b3c60..00000000000 --- a/board/LaCie/wireless_space/kwbimage.cfg +++ /dev/null @@ -1,71 +0,0 @@ -# -# Copyright (C) 2012 Albert ARIBAUD <albert.u.boot@aribaud.net> -# -# Based on netspace_v2 kwbimage.cfg: -# Copyright (C) 2011 Simon Guinot <sguinot@lacie.com> -# -# Based on Kirkwood support: -# (C) Copyright 2009 -# Marvell Semiconductor <www.marvell.com> -# Written-by: Prafulla Wadaskar <prafulla@marvell.com> -# -# SPDX-License-Identifier: GPL-2.0+ -# -# Refer doc/README.kwbimage for more details about how-to configure -# and create kirkwood boot image -# - -# Boot Media configurations -BOOT_FROM nand # Boot from NAND flash -NAND_PAGE_SIZE 800 - -# SOC registers configuration using bootrom header extension -# Maximum KWBIMAGE_MAX_CONFIG configurations allowed - -# Values taken from image original LaCie U-Boot header dump! - -# Configure RGMII-0 interface pad voltage to 1.8V -DATA 0xFFD100e0 0x1B1B1B9B - -#Dram initalization for SINGLE x16 CL=5 @ 400MHz -DATA 0xFFD01400 0x43000c30 # DDR Configuration register - -DATA 0xFFD01404 0x37743000 # DDR Controller Control Low - -DATA 0xFFD01408 0x11012228 # DDR Timing (Low) (active cycles value +1) - -DATA 0xFFD0140C 0x00000A19 # DDR Timing (High) - -DATA 0xFFD01410 0x0000CCCC # DDR Address Control - -DATA 0xFFD01414 0x00000000 # DDR Open Pages Control - -DATA 0xFFD01418 0x00000000 # DDR Operation - -DATA 0xFFD0141C 0x00000662 # DDR Mode - -DATA 0xFFD01420 0x00000004 # DDR Extended Mode - -DATA 0xFFD01424 0x0000F07F # DDR Controller Control High - -DATA 0xFFD01428 0x00096630 # DDR2 ODT Read Timing (default values) - -DATA 0xFFD0147C 0x00009663 # DDR2 ODT Write Timing (default values) - -DATA 0xFFD01504 0x0FFFFFF1 # CS[0]n Size -DATA 0xFFD01508 0x00000000 # CS[1]n Base address to 0x0 -DATA 0xFFD0150C 0x00000000 # CS[1]n Size, window disabled -DATA 0xFFD01514 0x00000000 # CS[2]n Size, window disabled -DATA 0xFFD0151C 0x00000000 # CS[3]n Size, window disabled -DATA 0xFFD01494 0x00120012 # DDR ODT Control (Low) -DATA 0xFFD01498 0x00000000 # DDR ODT Control (High) -DATA 0xFFD0149C 0x0000E40F # CPU ODT Control -DATA 0xFFD01480 0x00000001 # DDR Initialization Control -DATA 0xFFD20134 0x66666666 -DATA 0xFFD20138 0x66666666 -DATA 0xFFD10000 0x01112222 -DATA 0xFFD1000C 0x00000000 -DATA 0xFFD10104 0x00000000 -DATA 0xFFD10100 0x40000000 -# End of Header extension -DATA 0x0 0x0 diff --git a/board/LaCie/wireless_space/wireless_space.c b/board/LaCie/wireless_space/wireless_space.c deleted file mode 100644 index 8620e4b5d13..00000000000 --- a/board/LaCie/wireless_space/wireless_space.c +++ /dev/null @@ -1,165 +0,0 @@ -/* - * Copyright (C) 2011 Simon Guinot <sguinot@lacie.com> - * - * Based on Kirkwood support: - * (C) Copyright 2009 - * Marvell Semiconductor <www.marvell.com> - * Written-by: Prafulla Wadaskar <prafulla@marvell.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <command.h> -#include <asm/arch/cpu.h> -#include <asm/arch/soc.h> -#include <asm/arch/mpp.h> -#include <asm/arch/gpio.h> - -#include "../common/common.h" -#include "netdev.h" - -DECLARE_GLOBAL_DATA_PTR; - -/* GPIO configuration: start FAN at low speed, USB and HDD */ - -#define WIRELESS_SPACE_OE_LOW 0xFF006808 -#define WIRELESS_SPACE_OE_HIGH 0x0000F989 -#define WIRELESS_SPACE_OE_VAL_LOW 0x00010080 -#define WIRELESS_SPACE_OE_VAL_HIGH 0x00000240 - -#define WIRELESS_SPACE_REAR_BUTTON 13 -#define WIRELESS_SPACE_FRONT_BUTTON 43 - -const u32 kwmpp_config[] = { - MPP0_NF_IO2, - MPP1_NF_IO3, - MPP2_NF_IO4, - MPP3_NF_IO5, - MPP4_NF_IO6, - MPP5_NF_IO7, - MPP6_SYSRST_OUTn, - MPP7_GPO, /* Fan speed (bit 1) */ - MPP8_TW_SDA, - MPP9_TW_SCK, - MPP10_UART0_TXD, - MPP11_UART0_RXD, - MPP13_GPIO, /* Red led */ - MPP14_GPIO, /* USB fuse */ - MPP15_SATA0_ACTn, - MPP16_GPIO, /* SATA 0 power */ - MPP17_GPIO, /* SATA 1 power */ - MPP18_NF_IO0, - MPP19_NF_IO1, - MPP20_GE1_0, /* Gigabit Ethernet 1 */ - MPP21_GE1_1, - MPP22_GE1_2, - MPP23_GE1_3, - MPP24_GE1_4, - MPP25_GE1_5, - MPP26_GE1_6, - MPP27_GE1_7, - MPP28_GE1_8, - MPP29_GE1_9, - MPP30_GE1_10, - MPP31_GE1_11, - MPP32_GE1_12, - MPP33_GE1_13, - MPP34_GE1_14, - MPP35_GE1_15, - MPP36_GPIO, /* Fan speed (bit 2) */ - MPP37_GPIO, /* Fan speed (bit 0) */ - MPP38_GPIO, /* Fan power */ - MPP39_GPIO, /* Fan rotation fail */ - MPP40_GPIO, /* Ethernet switch link */ - MPP41_GPIO, /* USB enable host vbus */ - MPP42_GPIO, /* LED clock control */ - MPP43_GPIO, /* WPS button (0=Pushed, 1=Released) */ - MPP44_GPIO, /* Red LED on/off */ - MPP45_GPIO, /* Red LED timer blink (on=off=100ms) */ - MPP46_GPIO, /* Green LED on/off */ - MPP47_GPIO, /* LED (blue, green) SATA activity blink */ - MPP48_GPIO, /* Blue LED on/off */ - 0 -}; - -struct mv88e61xx_config swcfg = { - .name = "egiga0", - .vlancfg = MV88E61XX_VLANCFG_ROUTER, - .rgmii_delay = MV88E61XX_RGMII_DELAY_EN, - .led_init = MV88E61XX_LED_INIT_EN, - .mdip = MV88E61XX_MDIP_NOCHANGE, - .portstate = MV88E61XX_PORTSTT_FORWARDING, - .cpuport = 0x20, - .ports_enabled = 0x3F, -}; - -int board_early_init_f(void) -{ - /* Gpio configuration */ - mvebu_config_gpio(WIRELESS_SPACE_OE_VAL_LOW, WIRELESS_SPACE_OE_VAL_HIGH, - WIRELESS_SPACE_OE_LOW, WIRELESS_SPACE_OE_HIGH); - - /* Multi-Purpose Pins Functionality configuration */ - kirkwood_mpp_conf(kwmpp_config, NULL); - - return 0; -} - -int board_init(void) -{ - /* Machine number */ - gd->bd->bi_arch_number = CONFIG_MACH_TYPE; - - /* Boot parameters address */ - gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100; - - return 0; -} - -#if defined(CONFIG_MISC_INIT_R) -int misc_init_r(void) -{ -#if defined(CONFIG_CMD_I2C) && defined(CONFIG_SYS_I2C_EEPROM_ADDR) - if (!getenv("ethaddr")) { - uchar mac[6]; - if (lacie_read_mac_address(mac) == 0) - eth_setenv_enetaddr("ethaddr", mac); - } -#endif - return 0; -} -#endif - -#if defined(CONFIG_CMD_NET) && defined(CONFIG_RESET_PHY_R) -/* Configure and initialize PHY */ -void reset_phy(void) -{ - /* configure switch on egiga0 */ - mv88e61xx_switch_initialize(&swcfg); -} -#endif - -#if defined(CONFIG_KIRKWOOD_GPIO) && defined(CONFIG_WIRELESS_SPACE_CMD) -/* Return GPIO button status */ -static int -do_ws(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - if (strcmp(argv[1], "button") == 0) { - if (strcmp(argv[2], "rear") == 0) - /* invert GPIO result for intuitive while/until use */ - return !kw_gpio_get_value(WIRELESS_SPACE_REAR_BUTTON); - else if (strcmp(argv[2], "front") == 0) - return kw_gpio_get_value(WIRELESS_SPACE_FRONT_BUTTON); - else - return -1; - } else { - return -1; - } -} - -U_BOOT_CMD(ws, 3, 0, do_ws, - "Return GPIO button status 0=off 1=on", - "- ws button rear|front: test buttons' states\n" -); -#endif |