summaryrefslogtreecommitdiff
path: root/board
diff options
context:
space:
mode:
Diffstat (limited to 'board')
-rw-r--r--board/keymile/km82xx/Kconfig12
-rw-r--r--board/keymile/km82xx/MAINTAINERS7
-rw-r--r--board/keymile/km82xx/Makefile8
-rw-r--r--board/keymile/km82xx/km82xx.c463
4 files changed, 0 insertions, 490 deletions
diff --git a/board/keymile/km82xx/Kconfig b/board/keymile/km82xx/Kconfig
deleted file mode 100644
index c9a093ce02..0000000000
--- a/board/keymile/km82xx/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_KM82XX
-
-config SYS_BOARD
- default "km82xx"
-
-config SYS_VENDOR
- default "keymile"
-
-config SYS_CONFIG_NAME
- default "km82xx"
-
-endif
diff --git a/board/keymile/km82xx/MAINTAINERS b/board/keymile/km82xx/MAINTAINERS
deleted file mode 100644
index 50e06b261c..0000000000
--- a/board/keymile/km82xx/MAINTAINERS
+++ /dev/null
@@ -1,7 +0,0 @@
-KM82XX BOARD
-M: Holger Brunck <holger.brunck@keymile.com>
-S: Maintained
-F: board/keymile/km82xx/
-F: include/configs/km82xx.h
-F: configs/mgcoge_defconfig
-F: configs/mgcoge3ne_defconfig
diff --git a/board/keymile/km82xx/Makefile b/board/keymile/km82xx/Makefile
deleted file mode 100644
index 20f193ab1d..0000000000
--- a/board/keymile/km82xx/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2001-2007
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y := km82xx.o ../common/common.o ../common/ivm.o
diff --git a/board/keymile/km82xx/km82xx.c b/board/keymile/km82xx/km82xx.c
deleted file mode 100644
index f5a98b33e7..0000000000
--- a/board/keymile/km82xx/km82xx.c
+++ /dev/null
@@ -1,463 +0,0 @@
-/*
- * (C) Copyright 2007 - 2008
- * Heiko Schocher, DENX Software Engineering, hs@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <mpc8260.h>
-#include <ioports.h>
-#include <malloc.h>
-#include <asm/io.h>
-
-#include <libfdt.h>
-#include <i2c.h>
-#include "../common/common.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static uchar ivm_content[CONFIG_SYS_IVM_EEPROM_MAX_LEN];
-
-/*
- * I/O Port configuration table
- *
- * if conf is 1, then that port pin will be configured at boot time
- * according to the five values podr/pdir/ppar/psor/pdat for that entry
- */
-const iop_conf_t iop_conf_tab[4][32] = {
-
- /* Port A */
- { /* conf ppar psor pdir podr pdat */
- { 0, 0, 0, 0, 0, 0 }, /* PA31 */
- { 0, 0, 0, 0, 0, 0 }, /* PA30 */
- { 0, 0, 0, 0, 0, 0 }, /* PA29 */
- { 0, 0, 0, 0, 0, 0 }, /* PA28 */
- { 0, 0, 0, 0, 0, 0 }, /* PA27 */
- { 0, 0, 0, 0, 0, 0 }, /* PA26 */
- { 0, 0, 0, 0, 0, 0 }, /* PA25 */
- { 0, 0, 0, 0, 0, 0 }, /* PA24 */
- { 0, 0, 0, 0, 0, 0 }, /* PA23 */
- { 0, 0, 0, 0, 0, 0 }, /* PA22 */
- { 0, 0, 0, 0, 0, 0 }, /* PA21 */
- { 0, 0, 0, 0, 0, 0 }, /* PA20 */
- { 0, 0, 0, 0, 0, 0 }, /* PA19 */
- { 0, 0, 0, 0, 0, 0 }, /* PA18 */
- { 0, 0, 0, 0, 0, 0 }, /* PA17 */
- { 0, 0, 0, 0, 0, 0 }, /* PA16 */
- { 0, 0, 0, 0, 0, 0 }, /* PA15 */
- { 0, 0, 0, 0, 0, 0 }, /* PA14 */
- { 0, 0, 0, 0, 0, 0 }, /* PA13 */
- { 0, 0, 0, 0, 0, 0 }, /* PA12 */
- { 0, 0, 0, 0, 0, 0 }, /* PA11 */
- { 0, 0, 0, 0, 0, 0 }, /* PA10 */
- { 1, 1, 0, 1, 0, 0 }, /* PA9 SMC2 TxD */
- { 1, 1, 0, 0, 0, 0 }, /* PA8 SMC2 RxD */
- { 0, 0, 0, 0, 0, 0 }, /* PA7 */
- { 0, 0, 0, 0, 0, 0 }, /* PA6 */
- { 0, 0, 0, 0, 0, 0 }, /* PA5 */
- { 0, 0, 0, 0, 0, 0 }, /* PA4 */
- { 0, 0, 0, 0, 0, 0 }, /* PA3 */
- { 0, 0, 0, 0, 0, 0 }, /* PA2 */
- { 0, 0, 0, 0, 0, 0 }, /* PA1 */
- { 0, 0, 0, 0, 0, 0 } /* PA0 */
- },
-
- /* Port B */
- { /* conf ppar psor pdir podr pdat */
- { 0, 0, 0, 0, 0, 0 }, /* PB31 */
- { 0, 0, 0, 0, 0, 0 }, /* PB30 */
- { 0, 0, 0, 0, 0, 0 }, /* PB29 */
- { 0, 0, 0, 0, 0, 0 }, /* PB28 */
- { 0, 0, 0, 0, 0, 0 }, /* PB27 */
- { 0, 0, 0, 0, 0, 0 }, /* PB26 */
- { 0, 0, 0, 0, 0, 0 }, /* PB25 */
- { 0, 0, 0, 0, 0, 0 }, /* PB24 */
- { 0, 0, 0, 0, 0, 0 }, /* PB23 */
- { 0, 0, 0, 0, 0, 0 }, /* PB22 */
- { 0, 0, 0, 0, 0, 0 }, /* PB21 */
- { 0, 0, 0, 0, 0, 0 }, /* PB20 */
- { 0, 0, 0, 0, 0, 0 }, /* PB19 */
- { 0, 0, 0, 0, 0, 0 }, /* PB18 */
- { 0, 0, 0, 0, 0, 0 }, /* non-existent */
- { 0, 0, 0, 0, 0, 0 }, /* non-existent */
- { 0, 0, 0, 0, 0, 0 }, /* non-existent */
- { 0, 0, 0, 0, 0, 0 }, /* non-existent */
- { 0, 0, 0, 0, 0, 0 }, /* non-existent */
- { 0, 0, 0, 0, 0, 0 }, /* non-existent */
- { 0, 0, 0, 0, 0, 0 }, /* non-existent */
- { 0, 0, 0, 0, 0, 0 }, /* non-existent */
- { 0, 0, 0, 0, 0, 0 }, /* non-existent */
- { 0, 0, 0, 0, 0, 0 }, /* non-existent */
- { 0, 0, 0, 0, 0, 0 }, /* non-existent */
- { 0, 0, 0, 0, 0, 0 }, /* non-existent */
- { 0, 0, 0, 0, 0, 0 }, /* non-existent */
- { 0, 0, 0, 0, 0, 0 }, /* non-existent */
- { 0, 0, 0, 0, 0, 0 }, /* non-existent */
- { 0, 0, 0, 0, 0, 0 }, /* non-existent */
- { 0, 0, 0, 0, 0, 0 }, /* non-existent */
- { 0, 0, 0, 0, 0, 0 } /* non-existent */
- },
-
- /* Port C */
- { /* conf ppar psor pdir podr pdat */
- { 0, 0, 0, 0, 0, 0 }, /* PC31 */
- { 0, 0, 0, 0, 0, 0 }, /* PC30 */
- { 0, 0, 0, 0, 0, 0 }, /* PC29 */
- { 0, 0, 0, 0, 0, 0 }, /* PC28 */
- { 0, 0, 0, 0, 0, 0 }, /* PC27 */
- { 0, 0, 0, 0, 0, 0 }, /* PC26 */
- { 1, 1, 0, 0, 0, 0 }, /* PC25 RxClk */
- { 1, 1, 0, 0, 0, 0 }, /* PC24 TxClk */
- { 0, 0, 0, 0, 0, 0 }, /* PC23 */
- { 0, 0, 0, 0, 0, 0 }, /* PC22 */
- { 0, 0, 0, 0, 0, 0 }, /* PC21 */
- { 0, 0, 0, 0, 0, 0 }, /* PC20 */
- { 0, 0, 0, 0, 0, 0 }, /* PC19 */
- { 0, 0, 0, 0, 0, 0 }, /* PC18 */
- { 0, 0, 0, 0, 0, 0 }, /* PC17 */
- { 0, 0, 0, 0, 0, 0 }, /* PC16 */
- { 0, 0, 0, 0, 0, 0 }, /* PC15 */
- { 0, 0, 0, 0, 0, 0 }, /* PC14 */
- { 0, 0, 0, 0, 0, 0 }, /* PC13 */
- { 0, 0, 0, 0, 0, 0 }, /* PC12 */
- { 0, 0, 0, 0, 0, 0 }, /* PC11 */
- { 0, 0, 0, 0, 0, 0 }, /* PC10 */
- { 1, 1, 0, 0, 0, 0 }, /* PC9 SCC4: CTS */
- { 1, 1, 0, 0, 0, 0 }, /* PC8 SCC4: CD */
- { 0, 0, 0, 0, 0, 0 }, /* PC7 */
- { 0, 0, 0, 0, 0, 0 }, /* PC6 */
- { 0, 0, 0, 0, 0, 0 }, /* PC5 */
- { 0, 0, 0, 0, 0, 0 }, /* PC4 */
- { 0, 0, 0, 0, 0, 0 }, /* PC3 */
- { 0, 0, 0, 0, 0, 0 }, /* PC2 */
- { 0, 0, 0, 0, 0, 0 }, /* PC1 */
- { 0, 0, 0, 0, 0, 0 }, /* PC0 */
- },
-
- /* Port D */
- { /* conf ppar psor pdir podr pdat */
- { 0, 0, 0, 0, 0, 0 }, /* PD31 */
- { 0, 0, 0, 0, 0, 0 }, /* PD30 */
- { 0, 0, 0, 0, 0, 0 }, /* PD29 */
- { 0, 0, 0, 0, 0, 0 }, /* PD28 */
- { 0, 0, 0, 0, 0, 0 }, /* PD27 */
- { 0, 0, 0, 0, 0, 0 }, /* PD26 */
- { 0, 0, 0, 0, 0, 0 }, /* PD25 */
- { 0, 0, 0, 0, 0, 0 }, /* PD24 */
- { 0, 0, 0, 0, 0, 0 }, /* PD23 */
- { 1, 1, 0, 0, 0, 0 }, /* PD22 SCC4: RXD */
- { 1, 1, 0, 1, 0, 0 }, /* PD21 SCC4: TXD */
- { 1, 1, 0, 1, 0, 0 }, /* PD20 SCC4: RTS */
- { 0, 0, 0, 0, 0, 0 }, /* PD19 */
- { 0, 0, 0, 0, 0, 0 }, /* PD18 */
- { 0, 0, 0, 0, 0, 0 }, /* PD17 */
- { 0, 0, 0, 0, 0, 0 }, /* PD16 */
- { 1, 0, 0, 0, 1, 1 }, /* PD15 */
- { 1, 0, 0, 1, 1, 1 }, /* PD14 */
- { 0, 0, 0, 0, 0, 0 }, /* PD13 */
- { 0, 0, 0, 0, 0, 0 }, /* PD12 */
- { 0, 0, 0, 0, 0, 0 }, /* PD11 */
- { 0, 0, 0, 0, 0, 0 }, /* PD10 */
- { 0, 0, 0, 0, 0, 0 }, /* PD9 */
- { 0, 0, 0, 0, 0, 0 }, /* PD8 */
- { 0, 0, 0, 0, 0, 0 }, /* PD7 */
- { 0, 0, 0, 0, 0, 0 }, /* PD6 */
- { 0, 0, 0, 0, 0, 0 }, /* PD5 */
- { 0, 0, 0, 0, 0, 0 }, /* PD4 */
- { 0, 0, 0, 0, 0, 0 }, /* non-existent */
- { 0, 0, 0, 0, 0, 0 }, /* non-existent */
- { 0, 0, 0, 0, 0, 0 }, /* non-existent */
- { 0, 0, 0, 0, 0, 0 } /* non-existent */
- }
-};
-
-/*
- * Try SDRAM initialization with P/LSDMR=sdmr and ORx=orx
- *
- * This routine performs standard 8260 initialization sequence
- * and calculates the available memory size. It may be called
- * several times to try different SDRAM configurations on both
- * 60x and local buses.
- */
-static long int try_init(memctl8260_t *memctl, ulong sdmr,
- ulong orx, uchar *base)
-{
- uchar c = 0xff;
- ulong maxsize, size;
- int i;
-
- /*
- * We must be able to test a location outsize the maximum legal size
- * to find out THAT we are outside; but this address still has to be
- * mapped by the controller. That means, that the initial mapping has
- * to be (at least) twice as large as the maximum expected size.
- */
- maxsize = (1 + (~orx | 0x7fff))/* / 2*/;
-
- out_be32(&memctl->memc_or1, orx);
-
- /*
- * Quote from 8260 UM (10.4.2 SDRAM Power-On Initialization, 10-35):
- *
- * "At system reset, initialization software must set up the
- * programmable parameters in the memory controller banks registers
- * (ORx, BRx, P/LSDMR). After all memory parameters are configured,
- * system software should execute the following initialization sequence
- * for each SDRAM device.
- *
- * 1. Issue a PRECHARGE-ALL-BANKS command
- * 2. Issue eight CBR REFRESH commands
- * 3. Issue a MODE-SET command to initialize the mode register
- *
- * The initial commands are executed by setting P/LSDMR[OP] and
- * accessing the SDRAM with a single-byte transaction."
- *
- * The appropriate BRx/ORx registers have already been set when we
- * get here. The SDRAM can be accessed at the address
- * CONFIG_SYS_SDRAM_BASE.
- */
-
- out_be32(&memctl->memc_psdmr, sdmr | PSDMR_OP_PREA);
- out_8(base, c);
-
- out_be32(&memctl->memc_psdmr, sdmr | PSDMR_OP_CBRR);
- for (i = 0; i < 8; i++)
- out_8(base, c);
-
- out_be32(&memctl->memc_psdmr, sdmr | PSDMR_OP_MRW);
- /* setting MR on address lines */
- out_8((uchar *)(base + CONFIG_SYS_MRS_OFFS), c);
-
- out_be32(&memctl->memc_psdmr, sdmr | PSDMR_OP_NORM | PSDMR_RFEN);
- out_8(base, c);
-
- size = get_ram_size((long *)base, maxsize);
- out_be32(&memctl->memc_or1, orx | ~(size - 1));
-
- return size;
-}
-
-#ifdef CONFIG_SYS_SDRAM_LIST
-
-/*
- * If CONFIG_SYS_SDRAM_LIST is defined, we cycle through all SDRAM
- * configurations therein (should be from high to lower) to find the
- * one actually matching the current configuration.
- * CONFIG_SYS_PSDMR and CONFIG_SYS_OR1 will contain the base values which are
- * common among all possible configurations; values in CONFIG_SYS_SDRAM_LIST
- * (defined as the initialization value for the array of struct sdram_conf_s)
- * will then be ORed with such base values.
- */
-
-struct sdram_conf_s {
- ulong size;
- int or1;
- int psdmr;
-};
-
-static struct sdram_conf_s sdram_conf[] = CONFIG_SYS_SDRAM_LIST;
-
-static long probe_sdram(memctl8260_t *memctl)
-{
- int n = 0;
- long psize = 0;
-
- for (n = 0; n < ARRAY_SIZE(sdram_conf); psize = 0, n++) {
- psize = try_init(memctl,
- CONFIG_SYS_PSDMR | sdram_conf[n].psdmr,
- CONFIG_SYS_OR1 | sdram_conf[n].or1,
- (uchar *) CONFIG_SYS_SDRAM_BASE);
- debug("Probing %ld bytes returned %ld\n",
- sdram_conf[n].size, psize);
- if (psize == sdram_conf[n].size)
- break;
- }
- return psize;
-}
-
-#else /* CONFIG_SYS_SDRAM_LIST */
-
-static long probe_sdram(memctl8260_t *memctl)
-{
- return try_init(memctl, CONFIG_SYS_PSDMR, CONFIG_SYS_OR1,
- (uchar *) CONFIG_SYS_SDRAM_BASE);
-}
-#endif /* CONFIG_SYS_SDRAM_LIST */
-
-
-int dram_init(void)
-{
- immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- memctl8260_t *memctl = &immap->im_memctl;
-
- long psize;
-
- out_8(&memctl->memc_psrt, CONFIG_SYS_PSRT);
- out_be16(&memctl->memc_mptpr, CONFIG_SYS_MPTPR);
-
- /* 60x SDRAM setup:
- */
- psize = probe_sdram(memctl);
-
- icache_enable();
-
- gd->ram_size = psize;
-
- return 0;
-}
-
-int checkboard(void)
-{
-#if defined(CONFIG_MGCOGE)
- puts("Board: Keymile mgcoge");
-#else
- puts("Board: Keymile mgcoge3ne");
-#endif
- if (ethernet_present())
- puts(" with PIGGY.");
- puts("\n");
- return 0;
-}
-
-int last_stage_init(void)
-{
- struct bfticu_iomap *base =
- (struct bfticu_iomap *)CONFIG_SYS_FPGA_BASE;
- u8 dip_switch;
-
- dip_switch = in_8(&base->mswitch);
- dip_switch &= BFTICU_DIPSWITCH_MASK;
- /* dip switch 'full reset' or 'db erase' or 'Local mgmt IP' or any */
- if (dip_switch != 0) {
- /* start bootloader */
- puts("DIP: Enabled\n");
- setenv("actual_bank", "0");
- }
- set_km_env();
- return 0;
-}
-
-#ifdef CONFIG_MGCOGE3NE
-static void set_pin(int state, unsigned long mask, int port);
-
-/*
- * For mgcoge3ne boards, the mgcoge3un control is controlled from
- * a GPIO line on the PPC CPU. If bobcatreset is set the line
- * will toggle once what forces the mgocge3un part to restart
- * immediately.
- */
-static void handle_mgcoge3un_reset(void)
-{
- char *bobcatreset = getenv("bobcatreset");
- if (bobcatreset) {
- if (strcmp(bobcatreset, "true") == 0) {
- puts("Forcing bobcat reset\n");
- set_pin(0, 0x00000004, 3); /* clear PD29 (reset arm) */
- udelay(1000);
- set_pin(1, 0x00000004, 3);
- } else
- set_pin(1, 0x00000004, 3); /* don't reset arm */
- }
-}
-#endif
-
-int ethernet_present(void)
-{
- struct km_bec_fpga *base =
- (struct km_bec_fpga *)CONFIG_SYS_KMBEC_FPGA_BASE;
-
- return in_8(&base->bprth) & PIGGY_PRESENT;
-}
-
-/*
- * Early board initalization.
- */
-int board_early_init_r(void)
-{
- struct km_bec_fpga *base =
- (struct km_bec_fpga *)CONFIG_SYS_KMBEC_FPGA_BASE;
-
- /* setup the UPIOx */
- /* General Unit Reset disabled, Flash Bank enabled, UnitLed on */
- out_8(&base->oprth, (WRG_RESET | H_OPORTS_14 | WRG_LED));
- /* SCC4 enable, halfduplex, FCC1 powerdown */
- out_8(&base->oprtl, (H_OPORTS_SCC4_ENA | H_OPORTS_SCC4_FD_ENA |
- H_OPORTS_FCC1_PW_DWN));
-
-#ifdef CONFIG_MGCOGE3NE
- handle_mgcoge3un_reset();
-#endif
- return 0;
-}
-
-int misc_init_r(void)
-{
- ivm_read_eeprom(ivm_content, CONFIG_SYS_IVM_EEPROM_MAX_LEN);
- return 0;
-}
-
-int hush_init_var(void)
-{
- ivm_analyze_eeprom(ivm_content, CONFIG_SYS_IVM_EEPROM_MAX_LEN);
- return 0;
-}
-
-#define SDA_MASK 0x00010000
-#define SCL_MASK 0x00020000
-
-static void set_pin(int state, unsigned long mask, int port)
-{
- ioport_t *iop = ioport_addr((immap_t *)CONFIG_SYS_IMMR, port);
-
- if (state)
- setbits_be32(&iop->pdat, mask);
- else
- clrbits_be32(&iop->pdat, mask);
-
- setbits_be32(&iop->pdir, mask);
-}
-
-static int get_pin(unsigned long mask, int port)
-{
- ioport_t *iop = ioport_addr((immap_t *)CONFIG_SYS_IMMR, port);
-
- clrbits_be32(&iop->pdir, mask);
- return 0 != (in_be32(&iop->pdat) & mask);
-}
-
-void set_sda(int state)
-{
- set_pin(state, SDA_MASK, 3);
-}
-
-void set_scl(int state)
-{
- set_pin(state, SCL_MASK, 3);
-}
-
-int get_sda(void)
-{
- return get_pin(SDA_MASK, 3);
-}
-
-int get_scl(void)
-{
- return get_pin(SCL_MASK, 3);
-}
-
-int ft_board_setup(void *blob, bd_t *bd)
-{
- ft_cpu_setup(blob, bd);
-
- return 0;
-}
-
-#if defined(CONFIG_MGCOGE3NE)
-int get_testpin(void)
-{
- /* Testpin is Port C pin 29 - enable = low */
- int testpin = !get_pin(0x00000004, 2);
- return testpin;
-}
-#endif
generated by cgit v1.2.3 (git 2.0.4) at 2024-07-08 10:07:43 +0000