diff options
Diffstat (limited to 'board')
26 files changed, 38 insertions, 820 deletions
diff --git a/board/freescale/mpc8536ds/mpc8536ds.c b/board/freescale/mpc8536ds/mpc8536ds.c index bd80cb77652..58dc564eea6 100644 --- a/board/freescale/mpc8536ds/mpc8536ds.c +++ b/board/freescale/mpc8536ds/mpc8536ds.c @@ -42,8 +42,6 @@ #include "../common/sgmii_riser.h" -phys_size_t fixed_sdram(void); - int board_early_init_f (void) { #ifdef CONFIG_MMC @@ -98,25 +96,6 @@ int checkboard (void) return 0; } -phys_size_t -initdram(int board_type) -{ - phys_size_t dram_size = 0; - - puts("Initializing...."); - -#ifdef CONFIG_SPD_EEPROM - dram_size = fsl_ddr_sdram(); -#else - dram_size = fixed_sdram(); -#endif - dram_size = setup_ddr_tlbs(dram_size / 0x100000); - dram_size *= 0x100000; - - puts(" DDR: "); - return dram_size; -} - #if !defined(CONFIG_SPD_EEPROM) /* * Fixed sdram init -- doesn't use serial presence detect. diff --git a/board/freescale/mpc8540ads/mpc8540ads.c b/board/freescale/mpc8540ads/mpc8540ads.c index d354a26f69a..deab811bdd2 100644 --- a/board/freescale/mpc8540ads/mpc8540ads.c +++ b/board/freescale/mpc8540ads/mpc8540ads.c @@ -39,8 +39,6 @@ extern void ddr_enable_ecc(unsigned int dram_size); #endif void local_bus_init(void); -void sdram_init(void); -long int fixed_sdram(void); int checkboard (void) { @@ -61,54 +59,6 @@ int checkboard (void) return 0; } - -phys_size_t -initdram(int board_type) -{ - long dram_size = 0; - - puts("Initializing\n"); - -#if defined(CONFIG_DDR_DLL) - { - volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - uint temp_ddrdll = 0; - - /* - * Work around to stabilize DDR DLL - */ - temp_ddrdll = gur->ddrdllcr; - gur->ddrdllcr = ((temp_ddrdll & 0xff) << 16) | 0x80000000; - asm("sync;isync;msync"); - } -#endif - -#ifdef CONFIG_SPD_EEPROM - dram_size = fsl_ddr_sdram(); - dram_size = setup_ddr_tlbs(dram_size / 0x100000); - - dram_size *= 0x100000; -#else - dram_size = fixed_sdram(); -#endif - -#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) - /* - * Initialize and enable DDR ECC. - */ - ddr_enable_ecc(dram_size); -#endif - - /* - * Initialize SDRAM. - */ - sdram_init(); - - puts(" DDR: "); - return dram_size; -} - - /* * Initialize Local Bus */ @@ -232,7 +182,7 @@ sdram_init(void) /************************************************************************* * fixed sdram init -- doesn't use serial presence detect. ************************************************************************/ -long int fixed_sdram (void) +phys_size_t fixed_sdram(void) { #ifndef CONFIG_SYS_RAMBOOT volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR); diff --git a/board/freescale/mpc8540ads/tlb.c b/board/freescale/mpc8540ads/tlb.c index a9925d54277..adcc0ade0ab 100644 --- a/board/freescale/mpc8540ads/tlb.c +++ b/board/freescale/mpc8540ads/tlb.c @@ -106,25 +106,6 @@ struct fsl_e_tlb_entry tlb_table[] = { SET_TLB_ENTRY(1, CONFIG_SYS_BCSR, CONFIG_SYS_BCSR, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 7, BOOKE_PAGESZ_16K, 1), - -#if !defined(CONFIG_SPD_EEPROM) - /* - * TLB 8, 9: 128M DDR - * 0x00000000 64M DDR System memory - * 0x04000000 64M DDR System memory - * Without SPD EEPROM configured DDR, this must be setup manually. - * Make sure the TLB count at the top of this table is correct. - * Likely it needs to be increased by two for these entries. - */ -#error("Update the number of table entries in tlb1_entry") - SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 8, BOOKE_PAGESZ_64M, 1), - - SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE + 0x4000000, CONFIG_SYS_DDR_SDRAM_BASE + 0x4000000, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 9, BOOKE_PAGESZ_64M, 1), -#endif }; int num_tlb_entries = ARRAY_SIZE(tlb_table); diff --git a/board/freescale/mpc8541cds/mpc8541cds.c b/board/freescale/mpc8541cds/mpc8541cds.c index 59ec60446e9..59df2bdb393 100644 --- a/board/freescale/mpc8541cds/mpc8541cds.c +++ b/board/freescale/mpc8541cds/mpc8541cds.c @@ -42,7 +42,6 @@ extern void ddr_enable_ecc(unsigned int dram_size); #endif void local_bus_init(void); -void sdram_init(void); /* * I/O Port configuration table @@ -242,48 +241,6 @@ int checkboard (void) return 0; } -phys_size_t -initdram(int board_type) -{ - long dram_size = 0; - - puts("Initializing\n"); - -#if defined(CONFIG_DDR_DLL) - { - /* - * Work around to stabilize DDR DLL MSYNC_IN. - * Errata DDR9 seems to have been fixed. - * This is now the workaround for Errata DDR11: - * Override DLL = 1, Course Adj = 1, Tap Select = 0 - */ - - volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - - gur->ddrdllcr = 0x81000000; - asm("sync;isync;msync"); - udelay(200); - } -#endif - dram_size = fsl_ddr_sdram(); - dram_size = setup_ddr_tlbs(dram_size / 0x100000); - dram_size *= 0x100000; - -#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) - /* - * Initialize and enable DDR ECC. - */ - ddr_enable_ecc(dram_size); -#endif - /* - * SDRAM Initialization - */ - sdram_init(); - - puts(" DDR: "); - return dram_size; -} - /* * Initialize Local Bus */ diff --git a/board/freescale/mpc8544ds/mpc8544ds.c b/board/freescale/mpc8544ds/mpc8544ds.c index 2b6900c081b..caea2f4d9ff 100644 --- a/board/freescale/mpc8544ds/mpc8544ds.c +++ b/board/freescale/mpc8544ds/mpc8544ds.c @@ -68,23 +68,6 @@ int checkboard (void) return 0; } -phys_size_t -initdram(int board_type) -{ - long dram_size = 0; - - puts("Initializing\n"); - - dram_size = fsl_ddr_sdram(); - - dram_size = setup_ddr_tlbs(dram_size / 0x100000); - - dram_size *= 0x100000; - - puts(" DDR: "); - return dram_size; -} - #ifdef CONFIG_PCI1 static struct pci_controller pci1_hose; #endif diff --git a/board/freescale/mpc8548cds/mpc8548cds.c b/board/freescale/mpc8548cds/mpc8548cds.c index ebeb897490e..a4a35fa3bfe 100644 --- a/board/freescale/mpc8548cds/mpc8548cds.c +++ b/board/freescale/mpc8548cds/mpc8548cds.c @@ -42,7 +42,6 @@ DECLARE_GLOBAL_DATA_PTR; void local_bus_init(void); -void sdram_init(void); int checkboard (void) { @@ -75,43 +74,6 @@ int checkboard (void) return 0; } -phys_size_t -initdram(int board_type) -{ - long dram_size = 0; - - puts("Initializing\n"); - -#if defined(CONFIG_DDR_DLL) - { - /* - * Work around to stabilize DDR DLL MSYNC_IN. - * Errata DDR9 seems to have been fixed. - * This is now the workaround for Errata DDR11: - * Override DLL = 1, Course Adj = 1, Tap Select = 0 - */ - - volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - - gur->ddrdllcr = 0x81000000; - asm("sync;isync;msync"); - udelay(200); - } -#endif - - dram_size = fsl_ddr_sdram(); - dram_size = setup_ddr_tlbs(dram_size / 0x100000); - dram_size *= 0x100000; - - /* - * SDRAM Initialization - */ - sdram_init(); - - puts(" DDR: "); - return dram_size; -} - /* * Initialize Local Bus */ diff --git a/board/freescale/mpc8555cds/mpc8555cds.c b/board/freescale/mpc8555cds/mpc8555cds.c index edaba26f533..5fe7f13981a 100644 --- a/board/freescale/mpc8555cds/mpc8555cds.c +++ b/board/freescale/mpc8555cds/mpc8555cds.c @@ -40,7 +40,6 @@ extern void ddr_enable_ecc(unsigned int dram_size); #endif void local_bus_init(void); -void sdram_init(void); /* * I/O Port configuration table @@ -240,50 +239,6 @@ int checkboard (void) return 0; } -phys_size_t -initdram(int board_type) -{ - long dram_size = 0; - - puts("Initializing\n"); - -#if defined(CONFIG_DDR_DLL) - { - /* - * Work around to stabilize DDR DLL MSYNC_IN. - * Errata DDR9 seems to have been fixed. - * This is now the workaround for Errata DDR11: - * Override DLL = 1, Course Adj = 1, Tap Select = 0 - */ - - volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - - gur->ddrdllcr = 0x81000000; - asm("sync;isync;msync"); - udelay(200); - } -#endif - - dram_size = fsl_ddr_sdram(); - dram_size = setup_ddr_tlbs(dram_size / 0x100000); - dram_size *= 0x100000; - -#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) - /* - * Initialize and enable DDR ECC. - */ - ddr_enable_ecc(dram_size); -#endif - - /* - * SDRAM Initialization - */ - sdram_init(); - - puts(" DDR: "); - return dram_size; -} - /* * Initialize Local Bus */ diff --git a/board/freescale/mpc8560ads/mpc8560ads.c b/board/freescale/mpc8560ads/mpc8560ads.c index 2ae0459fec0..49701efda8f 100644 --- a/board/freescale/mpc8560ads/mpc8560ads.c +++ b/board/freescale/mpc8560ads/mpc8560ads.c @@ -44,8 +44,6 @@ extern void ddr_enable_ecc(unsigned int dram_size); void local_bus_init(void); -void sdram_init(void); -long int fixed_sdram(void); /* @@ -266,54 +264,6 @@ int checkboard (void) return 0; } - -phys_size_t -initdram(int board_type) -{ - long dram_size = 0; - - puts("Initializing\n"); - -#if defined(CONFIG_DDR_DLL) - { - volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - uint temp_ddrdll = 0; - - /* - * Work around to stabilize DDR DLL - */ - temp_ddrdll = gur->ddrdllcr; - gur->ddrdllcr = ((temp_ddrdll & 0xff) << 16) | 0x80000000; - asm("sync;isync;msync"); - } -#endif - -#ifdef CONFIG_SPD_EEPROM - dram_size = fsl_ddr_sdram(); - dram_size = setup_ddr_tlbs(dram_size / 0x100000); - - dram_size *= 0x100000; -#else - dram_size = fixed_sdram(); -#endif - -#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) - /* - * Initialize and enable DDR ECC. - */ - ddr_enable_ecc(dram_size); -#endif - - /* - * Initialize SDRAM. - */ - sdram_init(); - - puts(" DDR: "); - return dram_size; -} - - /* * Initialize Local Bus */ @@ -437,7 +387,7 @@ sdram_init(void) /************************************************************************* * fixed sdram init -- doesn't use serial presence detect. ************************************************************************/ -long int fixed_sdram (void) +phys_size_t fixed_sdram(void) { #ifndef CONFIG_SYS_RAMBOOT volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR); diff --git a/board/freescale/mpc8560ads/tlb.c b/board/freescale/mpc8560ads/tlb.c index a9925d54277..adcc0ade0ab 100644 --- a/board/freescale/mpc8560ads/tlb.c +++ b/board/freescale/mpc8560ads/tlb.c @@ -106,25 +106,6 @@ struct fsl_e_tlb_entry tlb_table[] = { SET_TLB_ENTRY(1, CONFIG_SYS_BCSR, CONFIG_SYS_BCSR, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 7, BOOKE_PAGESZ_16K, 1), - -#if !defined(CONFIG_SPD_EEPROM) - /* - * TLB 8, 9: 128M DDR - * 0x00000000 64M DDR System memory - * 0x04000000 64M DDR System memory - * Without SPD EEPROM configured DDR, this must be setup manually. - * Make sure the TLB count at the top of this table is correct. - * Likely it needs to be increased by two for these entries. - */ -#error("Update the number of table entries in tlb1_entry") - SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 8, BOOKE_PAGESZ_64M, 1), - - SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE + 0x4000000, CONFIG_SYS_DDR_SDRAM_BASE + 0x4000000, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 9, BOOKE_PAGESZ_64M, 1), -#endif }; int num_tlb_entries = ARRAY_SIZE(tlb_table); diff --git a/board/freescale/mpc8568mds/mpc8568mds.c b/board/freescale/mpc8568mds/mpc8568mds.c index 71cfbf0f375..85885fc4fe8 100644 --- a/board/freescale/mpc8568mds/mpc8568mds.c +++ b/board/freescale/mpc8568mds/mpc8568mds.c @@ -101,7 +101,6 @@ const qe_iop_conf_t qe_iop_conf_tab[] = { }; void local_bus_init(void); -void sdram_init(void); int board_early_init_f (void) { @@ -138,43 +137,6 @@ int checkboard (void) return 0; } -phys_size_t -initdram(int board_type) -{ - long dram_size = 0; - - puts("Initializing\n"); - -#if defined(CONFIG_DDR_DLL) - { - /* - * Work around to stabilize DDR DLL MSYNC_IN. - * Errata DDR9 seems to have been fixed. - * This is now the workaround for Errata DDR11: - * Override DLL = 1, Course Adj = 1, Tap Select = 0 - */ - - volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - - gur->ddrdllcr = 0x81000000; - asm("sync;isync;msync"); - udelay(200); - } -#endif - - dram_size = fsl_ddr_sdram(); - dram_size = setup_ddr_tlbs(dram_size / 0x100000); - dram_size *= 0x100000; - - /* - * SDRAM Initialization - */ - sdram_init(); - - puts(" DDR: "); - return dram_size; -} - /* * Initialize Local Bus */ diff --git a/board/freescale/mpc8569mds/mpc8569mds.c b/board/freescale/mpc8569mds/mpc8569mds.c index 9700b8c6e8a..07db16aa0c2 100644 --- a/board/freescale/mpc8569mds/mpc8569mds.c +++ b/board/freescale/mpc8569mds/mpc8569mds.c @@ -45,8 +45,6 @@ #include "../common/pq-mds-pib.h" #endif -phys_size_t fixed_sdram(void); - const qe_iop_conf_t qe_iop_conf_tab[] = { /* QE_MUX_MDC */ {2, 31, 1, 0, 1}, /* QE_MUX_MDC */ @@ -245,40 +243,6 @@ int checkboard (void) return 0; } -phys_size_t -initdram(int board_type) -{ - long dram_size = 0; - - puts("Initializing\n"); - -#if defined(CONFIG_DDR_DLL) - /* - * Work around to stabilize DDR DLL MSYNC_IN. - * Errata DDR9 seems to have been fixed. - * This is now the workaround for Errata DDR11: - * Override DLL = 1, Course Adj = 1, Tap Select = 0 - */ - volatile ccsr_gur_t *gur = - (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - - out_be32(&gur->ddrdllcr, 0x81000000); - udelay(200); -#endif - -#ifdef CONFIG_SPD_EEPROM - dram_size = fsl_ddr_sdram(); -#else - dram_size = fixed_sdram(); -#endif - - dram_size = setup_ddr_tlbs(dram_size / 0x100000); - dram_size *= 0x100000; - - puts(" DDR: "); - return dram_size; -} - #if !defined(CONFIG_SPD_EEPROM) phys_size_t fixed_sdram(void) { diff --git a/board/freescale/mpc8572ds/mpc8572ds.c b/board/freescale/mpc8572ds/mpc8572ds.c index c217c278ea9..c69dfe4cc4e 100644 --- a/board/freescale/mpc8572ds/mpc8572ds.c +++ b/board/freescale/mpc8572ds/mpc8572ds.c @@ -39,8 +39,6 @@ #include "../common/sgmii_riser.h" -long int fixed_sdram(void); - int checkboard (void) { u8 vboot; @@ -74,23 +72,6 @@ int checkboard (void) return 0; } -phys_size_t initdram(int board_type) -{ - phys_size_t dram_size = 0; - - puts("Initializing...."); - -#ifdef CONFIG_SPD_EEPROM - dram_size = fsl_ddr_sdram(); -#else - dram_size = fixed_sdram(); -#endif - dram_size = setup_ddr_tlbs(dram_size / 0x100000); - dram_size *= 0x100000; - - puts(" DDR: "); - return dram_size; -} #if !defined(CONFIG_SPD_EEPROM) /* diff --git a/board/freescale/p1022ds/p1022ds.c b/board/freescale/p1022ds/p1022ds.c index 7cb549b1bfb..e3e830066be 100644 --- a/board/freescale/p1022ds/p1022ds.c +++ b/board/freescale/p1022ds/p1022ds.c @@ -76,19 +76,6 @@ int checkboard(void) return 0; } -phys_size_t initdram(int board_type) -{ - phys_size_t dram_size = 0; - - puts("Initializing....\n"); - - dram_size = fsl_ddr_sdram(); - dram_size = setup_ddr_tlbs(dram_size / 0x100000) * 0x100000; - - puts(" DDR: "); - return dram_size; -} - #define CONFIG_TFP410_I2C_ADDR 0x38 /* Masks for the SSI_TDM and AUDCLK bits of the ngPIXIS BRDCFG1 register. */ diff --git a/board/freescale/p1_p2_rdb/ddr.c b/board/freescale/p1_p2_rdb/ddr.c index 15b46b0da15..e54fde25309 100644 --- a/board/freescale/p1_p2_rdb/ddr.c +++ b/board/freescale/p1_p2_rdb/ddr.c @@ -239,19 +239,6 @@ phys_size_t fixed_sdram (void) fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0); + set_ddr_laws(0, ddr_size, LAW_TRGT_IF_DDR_1); return ddr_size; } - -phys_size_t initdram(int board_type) -{ - phys_size_t dram_size = 0; - - dram_size = fixed_sdram(); - set_ddr_laws(0, dram_size, LAW_TRGT_IF_DDR_1); - - dram_size = setup_ddr_tlbs(dram_size / 0x100000); - dram_size *= 0x100000; - - puts("DDR: "); - return dram_size; -} diff --git a/board/freescale/p2020ds/p2020ds.c b/board/freescale/p2020ds/p2020ds.c index 07b08014df1..40589da117e 100644 --- a/board/freescale/p2020ds/p2020ds.c +++ b/board/freescale/p2020ds/p2020ds.c @@ -44,8 +44,6 @@ DECLARE_GLOBAL_DATA_PTR; -phys_size_t fixed_sdram(void); - int checkboard(void) { u8 sw; @@ -70,31 +68,6 @@ int checkboard(void) return 0; } -phys_size_t initdram(int board_type) -{ - phys_size_t dram_size = 0; - - puts("Initializing...."); - -#ifdef CONFIG_DDR_SPD - dram_size = fsl_ddr_sdram(); -#else - dram_size = fixed_sdram(); - - if (set_ddr_laws(CONFIG_SYS_DDR_SDRAM_BASE, - dram_size, - LAW_TRGT_IF_DDR) < 0) { - printf("ERROR setting Local Access Windows for DDR\n"); - return 0; - }; -#endif - dram_size = setup_ddr_tlbs(dram_size / 0x100000); - dram_size *= 0x100000; - - puts(" DDR: "); - return dram_size; -} - #if !defined(CONFIG_DDR_SPD) /* * Fixed sdram init -- doesn't use serial presence detect. @@ -170,6 +143,13 @@ phys_size_t fixed_sdram(void) udelay(500); #endif + if (set_ddr_laws(CONFIG_SYS_DDR_SDRAM_BASE, + CONFIG_SYS_SDRAM_SIZE * 1024 * 1024, + LAW_TRGT_IF_DDR) < 0) { + printf("ERROR setting Local Access Windows for DDR\n"); + return 0; + }; + return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; } diff --git a/board/sbc8548/sbc8548.c b/board/sbc8548/sbc8548.c index 06c1eea3779..1bce6fa3f31 100644 --- a/board/sbc8548/sbc8548.c +++ b/board/sbc8548/sbc8548.c @@ -43,8 +43,6 @@ DECLARE_GLOBAL_DATA_PTR; void local_bus_init(void); -void sdram_init(void); -long int fixed_sdram (void); int board_early_init_f (void) { @@ -69,47 +67,6 @@ int checkboard (void) return 0; } -phys_size_t -initdram(int board_type) -{ - long dram_size = 0; - - puts("Initializing\n"); - -#if defined(CONFIG_DDR_DLL) - { - /* - * Work around to stabilize DDR DLL MSYNC_IN. - * Errata DDR9 seems to have been fixed. - * This is now the workaround for Errata DDR11: - * Override DLL = 1, Course Adj = 1, Tap Select = 0 - */ - - volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - - out_be32(&gur->ddrdllcr, 0x81000000); - asm("sync;isync;msync"); - udelay(200); - } -#endif - -#if defined(CONFIG_SPD_EEPROM) - dram_size = fsl_ddr_sdram(); - dram_size = setup_ddr_tlbs(dram_size / 0x100000); - dram_size *= 0x100000; -#else - dram_size = fixed_sdram (); -#endif - - /* - * SDRAM Initialization - */ - sdram_init(); - - puts(" DDR: "); - return dram_size; -} - /* * Initialize Local Bus */ @@ -268,7 +225,7 @@ testdram(void) * fixed_sdram init -- doesn't use serial presence detect. * assumes 256MB DDR2 SDRAM SODIMM, without ECC, running at DDR400 speed. ************************************************************************/ -long int fixed_sdram (void) +phys_size_t fixed_sdram(void) { volatile ccsr_ddr_t *ddr = (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR); diff --git a/board/sbc8548/tlb.c b/board/sbc8548/tlb.c index 38bdeb37c30..bb4c05210cc 100644 --- a/board/sbc8548/tlb.c +++ b/board/sbc8548/tlb.c @@ -65,44 +65,34 @@ struct fsl_e_tlb_entry tlb_table[] = { 0, 1, BOOKE_PAGESZ_1G, 1), /* - * TLB 2: 256M Cacheable, non-guarded - * 0x0 256M DDR SDRAM - */ -#if !defined(CONFIG_SPD_EEPROM) - SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 2, BOOKE_PAGESZ_256M, 1), -#endif - - /* - * TLB 3: 64M Non-cacheable, guarded + * TLB 2: 64M Non-cacheable, guarded * 0xe0000000 1M CCSRBAR * 0xe2000000 8M PCI1 IO * 0xe2800000 8M PCIe IO */ SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 3, BOOKE_PAGESZ_64M, 1), + 0, 2, BOOKE_PAGESZ_64M, 1), /* - * TLB 4: 64M Cacheable, non-guarded + * TLB 3: 64M Cacheable, non-guarded * 0xf0000000 64M LBC SDRAM First half */ SET_TLB_ENTRY(1, CONFIG_SYS_LBC_SDRAM_BASE, CONFIG_SYS_LBC_SDRAM_BASE, MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 4, BOOKE_PAGESZ_64M, 1), + 0, 3, BOOKE_PAGESZ_64M, 1), /* - * TLB 5: 64M Cacheable, non-guarded + * TLB 4: 64M Cacheable, non-guarded * 0xf4000000 64M LBC SDRAM Second half */ SET_TLB_ENTRY(1, CONFIG_SYS_LBC_SDRAM_BASE + 0x4000000, CONFIG_SYS_LBC_SDRAM_BASE + 0x4000000, MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 5, BOOKE_PAGESZ_64M, 1), + 0, 4, BOOKE_PAGESZ_64M, 1), /* - * TLB 6: 16M Cacheable, non-guarded + * TLB 5: 16M Cacheable, non-guarded * 0xf8000000 1M 7-segment LED display * 0xf8100000 1M User switches * 0xf8300000 1M Board revision @@ -110,24 +100,24 @@ struct fsl_e_tlb_entry tlb_table[] = { */ SET_TLB_ENTRY(1, CONFIG_SYS_EPLD_BASE, CONFIG_SYS_EPLD_BASE, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 6, BOOKE_PAGESZ_16M, 1), + 0, 5, BOOKE_PAGESZ_16M, 1), /* - * TLB 7: 4M Non-cacheable, guarded + * TLB 6: 4M Non-cacheable, guarded * 0xfb800000 4M 1st 4MB block of 64MB user FLASH */ SET_TLB_ENTRY(1, CONFIG_SYS_ALT_FLASH, CONFIG_SYS_ALT_FLASH, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 7, BOOKE_PAGESZ_4M, 1), + 0, 6, BOOKE_PAGESZ_4M, 1), /* - * TLB 8: 4M Non-cacheable, guarded + * TLB 7: 4M Non-cacheable, guarded * 0xfbc00000 4M 2nd 4MB block of 64MB user FLASH */ SET_TLB_ENTRY(1, CONFIG_SYS_ALT_FLASH + 0x400000, CONFIG_SYS_ALT_FLASH + 0x400000, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 8, BOOKE_PAGESZ_4M, 1), + 0, 7, BOOKE_PAGESZ_4M, 1), }; diff --git a/board/sbc8560/sbc8560.c b/board/sbc8560/sbc8560.c index 7bf81799e51..c5fe92e0615 100644 --- a/board/sbc8560/sbc8560.c +++ b/board/sbc8560/sbc8560.c @@ -38,8 +38,6 @@ #include <libfdt.h> #include <fdt_support.h> -long int fixed_sdram (void); - /* * I/O Port configuration table * @@ -263,95 +261,6 @@ int checkboard (void) } -phys_size_t initdram (int board_type) -{ - long dram_size = 0; - -#if 0 -#if !defined(CONFIG_RAM_AS_FLASH) - volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; - sys_info_t sysinfo; - uint temp_lbcdll = 0; -#endif -#endif /* 0 */ -#if !defined(CONFIG_RAM_AS_FLASH) || defined(CONFIG_DDR_DLL) - volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); -#endif -#if defined(CONFIG_DDR_DLL) - uint temp_ddrdll = 0; - - /* Work around to stabilize DDR DLL */ - temp_ddrdll = gur->ddrdllcr; - gur->ddrdllcr = ((temp_ddrdll & 0xff) << 16) | 0x80000000; - asm("sync;isync;msync"); -#endif - -#if defined(CONFIG_SPD_EEPROM) - dram_size = fsl_ddr_sdram(); - dram_size = setup_ddr_tlbs(dram_size / 0x100000); - dram_size *= 0x100000; -#else - dram_size = fixed_sdram (); -#endif - -#if 0 -#if !defined(CONFIG_RAM_AS_FLASH) /* LocalBus SDRAM is not emulating flash */ - get_sys_info(&sysinfo); - /* if localbus freq is less than 66MHz,we use bypass mode,otherwise use DLL */ - if(sysinfo.freqSystemBus/(CONFIG_SYS_LBC_LCRR & 0x0f) < 66000000) { - lbc->lcrr = (CONFIG_SYS_LBC_LCRR & 0x0fffffff)| 0x80000000; - } else { -#if defined(CONFIG_MPC85xx_REV1) /* need change CLKDIV before enable DLL */ - lbc->lcrr = 0x10000004; /* default CLKDIV is 8, change it to 4 temporarily */ -#endif - lbc->lcrr = CONFIG_SYS_LBC_LCRR & 0x7fffffff; - udelay(200); - temp_lbcdll = gur->lbcdllcr; - gur->lbcdllcr = ((temp_lbcdll & 0xff) << 16 ) | 0x80000000; - asm("sync;isync;msync"); - } - set_lbc_or(2, CONFIG_SYS_OR2_PRELIM); /* 64MB SDRAM */ - set_lbc_br(2, CONFIG_SYS_BR2_PRELIM); - lbc->lbcr = CONFIG_SYS_LBC_LBCR; - lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_1; - asm("sync"); - (unsigned int) * (ulong *)0 = 0x000000ff; - lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_2; - asm("sync"); - (unsigned int) * (ulong *)0 = 0x000000ff; - lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_3; - asm("sync"); - (unsigned int) * (ulong *)0 = 0x000000ff; - lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_4; - asm("sync"); - (unsigned int) * (ulong *)0 = 0x000000ff; - lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_5; - asm("sync"); - lbc->lsrt = CONFIG_SYS_LBC_LSRT; - asm("sync"); - lbc->mrtpr = CONFIG_SYS_LBC_MRTPR; - asm("sync"); -#endif -#endif - -#if defined(CONFIG_DDR_ECC) - { - /* Initialize all of memory for ECC, then - * enable errors */ - volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR); - - dma_meminit(CONFIG_MEM_INIT_VALUE, dram_size); - - /* Enable errors for ECC */ - ddr->err_disable = 0x00000000; - asm("sync;isync;msync"); - } -#endif - - return dram_size; -} - - #if defined(CONFIG_SYS_DRAM_TEST) int testdram (void) { @@ -390,7 +299,7 @@ int testdram (void) /************************************************************************* * fixed sdram init -- doesn't use serial presence detect. ************************************************************************/ -long int fixed_sdram (void) +phys_size_t fixed_sdram(void) { #define CONFIG_SYS_DDR_CONTROL 0xc2000000 diff --git a/board/socrates/sdram.c b/board/socrates/sdram.c index ef897b216e3..c8235f4a9b4 100644 --- a/board/socrates/sdram.c +++ b/board/socrates/sdram.c @@ -39,7 +39,7 @@ * so this should be extended for other future boards * using this routine! */ -long int fixed_sdram(void) +phys_size_t fixed_sdram(void) { volatile ccsr_ddr_t *ddr = (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR); @@ -77,19 +77,6 @@ long int fixed_sdram(void) } #endif -phys_size_t initdram (int board_type) -{ - long dram_size = 0; -#if defined(CONFIG_SPD_EEPROM) - dram_size = fsl_ddr_sdram(); - dram_size = setup_ddr_tlbs(dram_size / 0x100000); - dram_size *= 0x100000; -#else - dram_size = fixed_sdram(); -#endif - return dram_size; -} - #if defined(CONFIG_SYS_DRAM_TEST) int testdram (void) { diff --git a/board/stx/stxgp3/stxgp3.c b/board/stx/stxgp3/stxgp3.c index 1ed340efe7c..de22bf5e0af 100644 --- a/board/stx/stxgp3/stxgp3.c +++ b/board/stx/stxgp3/stxgp3.c @@ -40,8 +40,6 @@ #include <spd_sdram.h> #include <miiphy.h> -long int fixed_sdram (void); - /* * I/O Port configuration table * @@ -277,36 +275,6 @@ show_activity(int flag) next_led_update += (get_tbclk() / 4); } -phys_size_t -initdram (int board_type) -{ - long dram_size = 0; - -#if defined(CONFIG_DDR_DLL) - { - volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - uint temp_ddrdll = 0; - - /* Work around to stabilize DDR DLL */ - temp_ddrdll = gur->ddrdllcr; - gur->ddrdllcr = ((temp_ddrdll & 0xff) << 16) | 0x80000000; - asm("sync;isync;msync"); - } -#endif - - dram_size = fsl_ddr_sdram(); - dram_size = setup_ddr_tlbs(dram_size / 0x100000); - dram_size *= 0x100000; - -#if defined(CONFIG_DDR_ECC) - /* Initialize and enable DDR ECC. - */ - ddr_enable_ecc(dram_size); -#endif - - return dram_size; -} - #if defined(CONFIG_SYS_DRAM_TEST) int testdram (void) diff --git a/board/stx/stxssa/stxssa.c b/board/stx/stxssa/stxssa.c index 6cd28a34b9f..83ffcd2b924 100644 --- a/board/stx/stxssa/stxssa.c +++ b/board/stx/stxssa/stxssa.c @@ -41,8 +41,6 @@ #include <miiphy.h> #include <netdev.h> -long int fixed_sdram (void); - /* * I/O Port configuration table * @@ -294,37 +292,6 @@ show_activity(int flag) next_led_update += (get_tbclk() / 4); } -phys_size_t -initdram (int board_type) -{ - long dram_size = 0; - -#if defined(CONFIG_DDR_DLL) - { - volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - uint temp_ddrdll = 0; - - /* Work around to stabilize DDR DLL */ - temp_ddrdll = gur->ddrdllcr; - gur->ddrdllcr = ((temp_ddrdll & 0xff) << 16) | 0x80000000; - asm("sync;isync;msync"); - } -#endif - - dram_size = fsl_ddr_sdram(); - dram_size = setup_ddr_tlbs(dram_size / 0x100000); - dram_size *= 0x100000; - -#if defined(CONFIG_DDR_ECC) - /* Initialize and enable DDR ECC. - */ - ddr_enable_ecc(dram_size); -#endif - - return dram_size; -} - - #if defined(CONFIG_SYS_DRAM_TEST) int testdram (void) { diff --git a/board/tqc/tqm85xx/sdram.c b/board/tqc/tqm85xx/sdram.c index 260cd1c6dd8..b2d31853516 100644 --- a/board/tqc/tqm85xx/sdram.c +++ b/board/tqc/tqm85xx/sdram.c @@ -394,43 +394,6 @@ static phys_size_t sdram_setup(int casl) return (i < N_DDR_CS_CONF) ? ddr_cs_conf[i].size : 0; } -phys_size_t initdram (int board_type) -{ - phys_size_t dram_size = 0; - -#if defined(CONFIG_DDR_DLL) - /* - * This DLL-Override only used on TQM8540 and TQM8560 - */ - { - volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - int i, x; - - x = 10; - - /* - * Work around to stabilize DDR DLL - */ - gur->ddrdllcr = 0x81000000; - asm ("sync; isync; msync"); - udelay (200); - while (gur->ddrdllcr != 0x81000100) { - gur->devdisr = gur->devdisr | 0x00010000; - asm ("sync; isync; msync"); - for (i = 0; i < x; i++) - ; - gur->devdisr = gur->devdisr & 0xfff7ffff; - asm ("sync; isync; msync"); - x++; - } - } -#endif - - dram_size = fixed_sdram(); - - return dram_size; -} - #if defined(CONFIG_SYS_DRAM_TEST) int testdram (void) { diff --git a/board/tqc/tqm85xx/tlb.c b/board/tqc/tqm85xx/tlb.c index 75dd348aa52..f9f8cc9a01e 100644 --- a/board/tqc/tqm85xx/tlb.c +++ b/board/tqc/tqm85xx/tlb.c @@ -120,36 +120,6 @@ struct fsl_e_tlb_entry tlb_table[] = { SET_TLB_ENTRY (1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G, 0, 6, BOOKE_PAGESZ_64M, 1), - -#if defined(CONFIG_TQM8548_AG) || defined (CONFIG_TQM8548_BE) - /* - * TLB 7+8: 2G DDR, cache enabled - * 0x00000000 2G DDR System memory - * Without SPD EEPROM configured DDR, this must be setup manually. - */ - SET_TLB_ENTRY (1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE, - MAS3_SX | MAS3_SW | MAS3_SR, 0, - 0, 7, BOOKE_PAGESZ_1G, 1), - - SET_TLB_ENTRY (1, CONFIG_SYS_DDR_SDRAM_BASE + 0x40000000, - CONFIG_SYS_DDR_SDRAM_BASE + 0x40000000, - MAS3_SX | MAS3_SW | MAS3_SR, 0, - 0, 8, BOOKE_PAGESZ_1G, 1), -#else - /* - * TLB 7+8: 512M DDR, cache disabled (needed for memory test) - * 0x00000000 512M DDR System memory - * Without SPD EEPROM configured DDR, this must be setup manually. - */ - SET_TLB_ENTRY (1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE, - MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G, - 0, 7, BOOKE_PAGESZ_256M, 1), - - SET_TLB_ENTRY (1, CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000, - CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000, - MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G, - 0, 8, BOOKE_PAGESZ_256M, 1), -#endif #ifdef CONFIG_PCIE1 /* * TLB 9: 16M Non-cacheable, guarded @@ -228,23 +198,6 @@ struct fsl_e_tlb_entry tlb_table[] = { SET_TLB_ENTRY (1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G, 0, 7, BOOKE_PAGESZ_64M, 1), - - /* - * TLB 8+9: 512M DDR, cache disabled (needed for memory test) - * 0x00000000 512M DDR System memory - * Without SPD EEPROM configured DDR, this must be setup manually. - * Make sure the TLB count at the top of this table is correct. - * Likely it needs to be increased by two for these entries. - */ - SET_TLB_ENTRY (1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE, - MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G, - 0, 8, BOOKE_PAGESZ_256M, 1), - - SET_TLB_ENTRY (1, CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000, - CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000, - MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G, - 0, 9, BOOKE_PAGESZ_256M, 1), - #ifdef CONFIG_PCIE1 /* * TLB 10: 16M Non-cacheable, guarded diff --git a/board/xes/common/Makefile b/board/xes/common/Makefile index 7604f626bbc..39d105fcdd0 100644 --- a/board/xes/common/Makefile +++ b/board/xes/common/Makefile @@ -33,8 +33,6 @@ COBJS-$(CONFIG_FSL_PCI_INIT) += fsl_8xxx_pci.o COBJS-$(CONFIG_MPC8572) += fsl_8xxx_clk.o COBJS-$(CONFIG_MPC86xx) += fsl_8xxx_clk.o COBJS-$(CONFIG_P2020) += fsl_8xxx_clk.o -COBJS-$(CONFIG_FSL_DDR2) += fsl_8xxx_ddr.o -COBJS-$(CONFIG_FSL_DDR3) += fsl_8xxx_ddr.o COBJS-$(CONFIG_MPC85xx) += fsl_8xxx_misc.o board.o COBJS-$(CONFIG_MPC86xx) += fsl_8xxx_misc.o board.o COBJS-$(CONFIG_NAND_ACTL) += actl_nand.o diff --git a/board/xes/common/fsl_8xxx_ddr.c b/board/xes/common/fsl_8xxx_ddr.c deleted file mode 100644 index 81ee70d5a14..00000000000 --- a/board/xes/common/fsl_8xxx_ddr.c +++ /dev/null @@ -1,46 +0,0 @@ -/* - * Copyright 2008 Extreme Engineering Solutions, Inc. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/fsl_ddr_sdram.h> -#include <asm/mmu.h> - -#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) -extern void ddr_enable_ecc(unsigned int dram_size); -#endif - -phys_size_t initdram(int board_type) -{ - phys_size_t dram_size = fsl_ddr_sdram(); - -#ifdef CONFIG_MPC85xx - dram_size = setup_ddr_tlbs(dram_size / 0x100000); - dram_size *= 0x100000; -#endif - -#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) - /* Initialize and enable DDR ECC */ - ddr_enable_ecc(dram_size); -#endif - - return dram_size; -} diff --git a/board/xes/xpedite517x/xpedite517x.c b/board/xes/xpedite517x/xpedite517x.c index 0f7fa6c43ab..572a9080047 100644 --- a/board/xes/xpedite517x/xpedite517x.c +++ b/board/xes/xpedite517x/xpedite517x.c @@ -22,6 +22,7 @@ #include <common.h> #include <asm/processor.h> +#include <asm/fsl_ddr_sdram.h> #include <asm/mmu.h> #include <asm/io.h> #include <fdt_support.h> @@ -71,6 +72,18 @@ int board_early_init_r(void) return 0; } +phys_size_t initdram(int board_type) +{ + phys_size_t dram_size = fsl_ddr_sdram(); + +#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) + /* Initialize and enable DDR ECC */ + ddr_enable_ecc(dram_size); +#endif + + return dram_size; +} + #if defined(CONFIG_OF_BOARD_SETUP) void ft_board_setup(void *blob, bd_t *bd) { |