summaryrefslogtreecommitdiff
path: root/board/xm250/lowlevel_init.S
diff options
context:
space:
mode:
Diffstat (limited to 'board/xm250/lowlevel_init.S')
-rw-r--r--board/xm250/lowlevel_init.S86
1 files changed, 43 insertions, 43 deletions
diff --git a/board/xm250/lowlevel_init.S b/board/xm250/lowlevel_init.S
index 2ebd39554a1..8230550c688 100644
--- a/board/xm250/lowlevel_init.S
+++ b/board/xm250/lowlevel_init.S
@@ -24,7 +24,7 @@
#include <version.h>
#include <asm/arch/pxa-regs.h>
-DRAM_SIZE: .long CFG_DRAM_SIZE
+DRAM_SIZE: .long CONFIG_SYS_DRAM_SIZE
/* wait for coprocessor write complete */
.macro CPWAIT reg
@@ -51,98 +51,98 @@ lowlevel_init:
/* Set up GPIO pins first */
ldr r0, =GPSR0
- ldr r1, =CFG_GPSR0_VAL
+ ldr r1, =CONFIG_SYS_GPSR0_VAL
str r1, [r0]
ldr r0, =GPSR1
- ldr r1, =CFG_GPSR1_VAL
+ ldr r1, =CONFIG_SYS_GPSR1_VAL
str r1, [r0]
ldr r0, =GPSR2
- ldr r1, =CFG_GPSR2_VAL
+ ldr r1, =CONFIG_SYS_GPSR2_VAL
str r1, [r0]
ldr r0, =GPCR0
- ldr r1, =CFG_GPCR0_VAL
+ ldr r1, =CONFIG_SYS_GPCR0_VAL
str r1, [r0]
ldr r0, =GPCR1
- ldr r1, =CFG_GPCR1_VAL
+ ldr r1, =CONFIG_SYS_GPCR1_VAL
str r1, [r0]
ldr r0, =GPCR2
- ldr r1, =CFG_GPCR2_VAL
+ ldr r1, =CONFIG_SYS_GPCR2_VAL
str r1, [r0]
ldr r0, =GRER0
- ldr r1, =CFG_GRER0_VAL
+ ldr r1, =CONFIG_SYS_GRER0_VAL
str r1, [r0]
ldr r0, =GRER1
- ldr r1, =CFG_GRER1_VAL
+ ldr r1, =CONFIG_SYS_GRER1_VAL
str r1, [r0]
ldr r0, =GRER2
- ldr r1, =CFG_GRER2_VAL
+ ldr r1, =CONFIG_SYS_GRER2_VAL
str r1, [r0]
ldr r0, =GFER0
- ldr r1, =CFG_GFER0_VAL
+ ldr r1, =CONFIG_SYS_GFER0_VAL
str r1, [r0]
ldr r0, =GFER1
- ldr r1, =CFG_GFER1_VAL
+ ldr r1, =CONFIG_SYS_GFER1_VAL
str r1, [r0]
ldr r0, =GFER2
- ldr r1, =CFG_GFER2_VAL
+ ldr r1, =CONFIG_SYS_GFER2_VAL
str r1, [r0]
ldr r0, =GPDR0
- ldr r1, =CFG_GPDR0_VAL
+ ldr r1, =CONFIG_SYS_GPDR0_VAL
str r1, [r0]
ldr r0, =GPDR1
- ldr r1, =CFG_GPDR1_VAL
+ ldr r1, =CONFIG_SYS_GPDR1_VAL
str r1, [r0]
ldr r0, =GPDR2
- ldr r1, =CFG_GPDR2_VAL
+ ldr r1, =CONFIG_SYS_GPDR2_VAL
str r1, [r0]
ldr r0, =GAFR0_L
- ldr r1, =CFG_GAFR0_L_VAL
+ ldr r1, =CONFIG_SYS_GAFR0_L_VAL
str r1, [r0]
ldr r0, =GAFR0_U
- ldr r1, =CFG_GAFR0_U_VAL
+ ldr r1, =CONFIG_SYS_GAFR0_U_VAL
str r1, [r0]
ldr r0, =GAFR1_L
- ldr r1, =CFG_GAFR1_L_VAL
+ ldr r1, =CONFIG_SYS_GAFR1_L_VAL
str r1, [r0]
ldr r0, =GAFR1_U
- ldr r1, =CFG_GAFR1_U_VAL
+ ldr r1, =CONFIG_SYS_GAFR1_U_VAL
str r1, [r0]
ldr r0, =GAFR2_L
- ldr r1, =CFG_GAFR2_L_VAL
+ ldr r1, =CONFIG_SYS_GAFR2_L_VAL
str r1, [r0]
ldr r0, =GAFR2_U
- ldr r1, =CFG_GAFR2_U_VAL
+ ldr r1, =CONFIG_SYS_GAFR2_U_VAL
str r1, [r0]
/* enable GPIO pins */
ldr r0, =PSSR
- ldr r1, =CFG_PSSR_VAL
+ ldr r1, =CONFIG_SYS_PSSR_VAL
str r1, [r0]
/* SET_LED 1 */
ldr r3, =MSC1 /* low - bank 2 Lubbock Registers / SRAM */
- ldr r2, =CFG_MSC1_VAL /* high - bank 3 Ethernet Controller */
+ ldr r2, =CONFIG_SYS_MSC1_VAL /* high - bank 3 Ethernet Controller */
str r2, [r3] /* need to set MSC1 before trying to write to the HEX LEDs */
ldr r2, [r3] /* need to read it back to make sure the value latches (see MSC section of manual) */
@@ -181,47 +181,47 @@ mem_init:
@ Step 2a
@ write msc0, read back to ensure data latches
@
- ldr r2, =CFG_MSC0_VAL
+ ldr r2, =CONFIG_SYS_MSC0_VAL
str r2, [r1, #MSC0_OFFSET]
ldr r2, [r1, #MSC0_OFFSET]
@ write msc1
- ldr r2, =CFG_MSC1_VAL
+ ldr r2, =CONFIG_SYS_MSC1_VAL
str r2, [r1, #MSC1_OFFSET]
ldr r2, [r1, #MSC1_OFFSET]
@ write msc2
- ldr r2, =CFG_MSC2_VAL
+ ldr r2, =CONFIG_SYS_MSC2_VAL
str r2, [r1, #MSC2_OFFSET]
ldr r2, [r1, #MSC2_OFFSET]
@ Step 2b
@ write mecr
- ldr r2, =CFG_MECR_VAL
+ ldr r2, =CONFIG_SYS_MECR_VAL
str r2, [r1, #MECR_OFFSET]
@ write mcmem0
- ldr r2, =CFG_MCMEM0_VAL
+ ldr r2, =CONFIG_SYS_MCMEM0_VAL
str r2, [r1, #MCMEM0_OFFSET]
@ write mcmem1
- ldr r2, =CFG_MCMEM1_VAL
+ ldr r2, =CONFIG_SYS_MCMEM1_VAL
str r2, [r1, #MCMEM1_OFFSET]
@ write mcatt0
- ldr r2, =CFG_MCATT0_VAL
+ ldr r2, =CONFIG_SYS_MCATT0_VAL
str r2, [r1, #MCATT0_OFFSET]
@ write mcatt1
- ldr r2, =CFG_MCATT1_VAL
+ ldr r2, =CONFIG_SYS_MCATT1_VAL
str r2, [r1, #MCATT1_OFFSET]
@ write mcio0
- ldr r2, =CFG_MCIO0_VAL
+ ldr r2, =CONFIG_SYS_MCIO0_VAL
str r2, [r1, #MCIO0_OFFSET]
@ write mcio1
- ldr r2, =CFG_MCIO1_VAL
+ ldr r2, =CONFIG_SYS_MCIO1_VAL
str r2, [r1, #MCIO1_OFFSET]
/*SET_LED 3 */
@@ -229,14 +229,14 @@ mem_init:
@ Step 2c
@ fly-by-dma is defeatured on this part
@ write flycnfg
- @ldr r2, =CFG_FLYCNFG_VAL
+ @ldr r2, =CONFIG_SYS_FLYCNFG_VAL
@str r2, [r1, #FLYCNFG_OFFSET]
/* FIXME Does this sequence really make sense */
#ifdef REDBOOT_WAY
@ Step 2d
@ get the mdrefr settings
- ldr r3, =CFG_MDREFR_VAL
+ ldr r3, =CONFIG_SYS_MDREFR_VAL
@ extract DRI field (we need a valid DRI field)
@
@@ -319,7 +319,7 @@ mem_init:
#else
@ Step 2d
@ get the mdrefr settings
- ldr r4, =CFG_MDREFR_VAL
+ ldr r4, =CONFIG_SYS_MDREFR_VAL
@ write back mdrefr
@
@@ -367,7 +367,7 @@ mem_init:
@ Step 4d
@ fetch platform value of mdcnfg
@
- ldr r2, =CFG_MDCNFG_VAL
+ ldr r2, =CONFIG_SYS_MDCNFG_VAL
@ disable all sdram banks
@
@@ -404,7 +404,7 @@ mem_init:
@ Access memory *not yet enabled* for CBR refresh cycles (8)
@ - CBR is generated for all banks
- ldr r2, =CFG_DRAM_BASE
+ ldr r2, =CONFIG_SYS_DRAM_BASE
str r2, [r2]
str r2, [r2]
str r2, [r2]
@@ -434,7 +434,7 @@ mem_init:
@ Step 4h
@ write mdmrs
@
- ldr r2, =CFG_MDMRS_VAL
+ ldr r2, =CONFIG_SYS_MDMRS_VAL
str r2, [r1, #MDMRS_OFFSET]
@ Done Memory Init
@@ -453,7 +453,7 @@ mem_init:
@ Set interrupt mask register
@
- ldr r1, =CFG_ICMR_VAL
+ ldr r1, =CONFIG_SYS_ICMR_VAL
ldr r2, =ICMR
str r1, [r2]
@@ -469,7 +469,7 @@ mem_init:
@ set core clocks
@
- ldr r2, =CFG_CCCR_VAL
+ ldr r2, =CONFIG_SYS_CCCR_VAL
ldr r1, =CCCR
str r2, [r1]
@@ -492,7 +492,7 @@ mem_init:
@ Turn on needed clocks
@
ldr r1, =CKEN
- ldr r2, =CFG_CKEN_VAL
+ ldr r2, =CONFIG_SYS_CKEN_VAL
str r2, [r1]
/*SET_LED 7 */