diff options
Diffstat (limited to 'board/xilinx/common/xpacket_fifo_v1_00_b.h')
-rw-r--r-- | board/xilinx/common/xpacket_fifo_v1_00_b.h | 306 |
1 files changed, 306 insertions, 0 deletions
diff --git a/board/xilinx/common/xpacket_fifo_v1_00_b.h b/board/xilinx/common/xpacket_fifo_v1_00_b.h new file mode 100644 index 00000000000..1cda0e8cc47 --- /dev/null +++ b/board/xilinx/common/xpacket_fifo_v1_00_b.h @@ -0,0 +1,306 @@ +/****************************************************************************** +* +* Author: Xilinx, Inc. +* +* +* This program is free software; you can redistribute it and/or modify it +* under the terms of the GNU General Public License as published by the +* Free Software Foundation; either version 2 of the License, or (at your +* option) any later version. +* +* +* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A +* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS +* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD, +* XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE +* FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING +* ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION. +* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO +* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY +* WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM +* CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND +* FITNESS FOR A PARTICULAR PURPOSE. +* +* +* Xilinx hardware products are not intended for use in life support +* appliances, devices, or systems. Use in such applications is +* expressly prohibited. +* +* +* (c) Copyright 2002-2004 Xilinx Inc. +* All rights reserved. +* +* +* You should have received a copy of the GNU General Public License along +* with this program; if not, write to the Free Software Foundation, Inc., +* 675 Mass Ave, Cambridge, MA 02139, USA. +* +******************************************************************************/ +/*****************************************************************************/ +/* +* +* @file xpacket_fifo_v1_00_b.h +* +* This component is a common component because it's primary purpose is to +* prevent code duplication in drivers. A driver which must handle a packet +* FIFO uses this component rather than directly manipulating a packet FIFO. +* +* A FIFO is a device which has dual port memory such that one user may be +* inserting data into the FIFO while another is consuming data from the FIFO. +* A packet FIFO is designed for use with packet protocols such as Ethernet and +* ATM. It is typically only used with devices when DMA and/or Scatter Gather +* is used. It differs from a nonpacket FIFO in that it does not provide any +* interrupts for thresholds of the FIFO such that it is less useful without +* DMA. +* +* @note +* +* This component has the capability to generate an interrupt when an error +* condition occurs. It is the user's responsibility to provide the interrupt +* processing to handle the interrupt. This component provides the ability to +* determine if that interrupt is active, a deadlock condition, and the ability +* to reset the FIFO to clear the condition. In this condition, the device which +* is using the FIFO should also be reset to prevent other problems. This error +* condition could occur as a normal part of operation if the size of the FIFO +* is not setup correctly. See the hardware IP specification for more details. +* +* <pre> +* MODIFICATION HISTORY: +* +* Ver Who Date Changes +* ----- ---- -------- ----------------------------------------------- +* 1.00b rpm 03/26/02 First release +* </pre> +* +*****************************************************************************/ +#ifndef XPACKET_FIFO_H /* prevent circular inclusions */ +#define XPACKET_FIFO_H /* by using protection macros */ + +/***************************** Include Files *********************************/ + +#include "xbasic_types.h" +#include "xstatus.h" + +/************************** Constant Definitions *****************************/ + +/* + * These constants specify the FIFO type and are mutually exclusive + */ +#define XPF_READ_FIFO_TYPE 0 /* a read FIFO */ +#define XPF_WRITE_FIFO_TYPE 1 /* a write FIFO */ + +/* + * These constants define the offsets to each of the registers from the + * register base address, each of the constants are a number of bytes + */ +#define XPF_RESET_REG_OFFSET 0UL +#define XPF_MODULE_INFO_REG_OFFSET 0UL +#define XPF_COUNT_STATUS_REG_OFFSET 4UL + +/* + * This constant is used with the Reset Register + */ +#define XPF_RESET_FIFO_MASK 0x0000000A + +/* + * These constants are used with the Occupancy/Vacancy Count Register. This + * register also contains FIFO status + */ +#define XPF_COUNT_MASK 0x0000FFFF +#define XPF_DEADLOCK_MASK 0x20000000 +#define XPF_ALMOST_EMPTY_FULL_MASK 0x40000000 +#define XPF_EMPTY_FULL_MASK 0x80000000 + +/**************************** Type Definitions *******************************/ + +/* + * The XPacketFifo driver instance data. The driver is required to allocate a + * variable of this type for every packet FIFO in the device. + */ +typedef struct { + u32 RegBaseAddress; /* Base address of registers */ + u32 IsReady; /* Device is initialized and ready */ + u32 DataBaseAddress; /* Base address of data for FIFOs */ +} XPacketFifoV100b; + +/***************** Macros (Inline Functions) Definitions *********************/ + +/*****************************************************************************/ +/* +* +* Reset the specified packet FIFO. Resetting a FIFO will cause any data +* contained in the FIFO to be lost. +* +* @param InstancePtr contains a pointer to the FIFO to operate on. +* +* @return +* +* None. +* +* @note +* +* Signature: void XPF_V100B_RESET(XPacketFifoV100b *InstancePtr) +* +******************************************************************************/ +#define XPF_V100B_RESET(InstancePtr) \ + XIo_Out32((InstancePtr)->RegBaseAddress + XPF_RESET_REG_OFFSET, XPF_RESET_FIFO_MASK); + +/*****************************************************************************/ +/* +* +* Get the occupancy count for a read packet FIFO and the vacancy count for a +* write packet FIFO. These counts indicate the number of 32-bit words +* contained (occupancy) in the FIFO or the number of 32-bit words available +* to write (vacancy) in the FIFO. +* +* @param InstancePtr contains a pointer to the FIFO to operate on. +* +* @return +* +* The occupancy or vacancy count for the specified packet FIFO. +* +* @note +* +* Signature: u32 XPF_V100B_GET_COUNT(XPacketFifoV100b *InstancePtr) +* +******************************************************************************/ +#define XPF_V100B_GET_COUNT(InstancePtr) \ + (XIo_In32((InstancePtr)->RegBaseAddress + XPF_COUNT_STATUS_REG_OFFSET) & \ + XPF_COUNT_MASK) + +/*****************************************************************************/ +/* +* +* Determine if the specified packet FIFO is almost empty. Almost empty is +* defined for a read FIFO when there is only one data word in the FIFO. +* +* @param InstancePtr contains a pointer to the FIFO to operate on. +* +* @return +* +* TRUE if the packet FIFO is almost empty, FALSE otherwise. +* +* @note +* +* Signature: u32 XPF_V100B_IS_ALMOST_EMPTY(XPacketFifoV100b *InstancePtr) +* +******************************************************************************/ +#define XPF_V100B_IS_ALMOST_EMPTY(InstancePtr) \ + (XIo_In32((InstancePtr)->RegBaseAddress + XPF_COUNT_STATUS_REG_OFFSET) & \ + XPF_ALMOST_EMPTY_FULL_MASK) + +/*****************************************************************************/ +/* +* +* Determine if the specified packet FIFO is almost full. Almost full is +* defined for a write FIFO when there is only one available data word in the +* FIFO. +* +* @param InstancePtr contains a pointer to the FIFO to operate on. +* +* @return +* +* TRUE if the packet FIFO is almost full, FALSE otherwise. +* +* @note +* +* Signature: u32 XPF_V100B_IS_ALMOST_FULL(XPacketFifoV100b *InstancePtr) +* +******************************************************************************/ +#define XPF_V100B_IS_ALMOST_FULL(InstancePtr) \ + (XIo_In32((InstancePtr)->RegBaseAddress + XPF_COUNT_STATUS_REG_OFFSET) & \ + XPF_ALMOST_EMPTY_FULL_MASK) + +/*****************************************************************************/ +/* +* +* Determine if the specified packet FIFO is empty. This applies only to a +* read FIFO. +* +* @param InstancePtr contains a pointer to the FIFO to operate on. +* +* @return +* +* TRUE if the packet FIFO is empty, FALSE otherwise. +* +* @note +* +* Signature: u32 XPF_V100B_IS_EMPTY(XPacketFifoV100b *InstancePtr) +* +******************************************************************************/ +#define XPF_V100B_IS_EMPTY(InstancePtr) \ + (XIo_In32((InstancePtr)->RegBaseAddress + XPF_COUNT_STATUS_REG_OFFSET) & \ + XPF_EMPTY_FULL_MASK) + +/*****************************************************************************/ +/* +* +* Determine if the specified packet FIFO is full. This applies only to a +* write FIFO. +* +* @param InstancePtr contains a pointer to the FIFO to operate on. +* +* @return +* +* TRUE if the packet FIFO is full, FALSE otherwise. +* +* @note +* +* Signature: u32 XPF_V100B_IS_FULL(XPacketFifoV100b *InstancePtr) +* +******************************************************************************/ +#define XPF_V100B_IS_FULL(InstancePtr) \ + (XIo_In32((InstancePtr)->RegBaseAddress + XPF_COUNT_STATUS_REG_OFFSET) & \ + XPF_EMPTY_FULL_MASK) + +/*****************************************************************************/ +/* +* +* Determine if the specified packet FIFO is deadlocked. This condition occurs +* when the FIFO is full and empty at the same time and is caused by a packet +* being written to the FIFO which exceeds the total data capacity of the FIFO. +* It occurs because of the mark/restore features of the packet FIFO which allow +* retransmission of a packet. The software should reset the FIFO and any devices +* using the FIFO when this condition occurs. +* +* @param InstancePtr contains a pointer to the FIFO to operate on. +* +* @return +* +* TRUE if the packet FIFO is deadlocked, FALSE otherwise. +* +* @note +* +* This component has the capability to generate an interrupt when an error +* condition occurs. It is the user's responsibility to provide the interrupt +* processing to handle the interrupt. This function provides the ability to +* determine if a deadlock condition, and the ability to reset the FIFO to +* clear the condition. +* +* In this condition, the device which is using the FIFO should also be reset +* to prevent other problems. This error condition could occur as a normal part +* of operation if the size of the FIFO is not setup correctly. +* +* Signature: u32 XPF_V100B_IS_DEADLOCKED(XPacketFifoV100b *InstancePtr) +* +******************************************************************************/ +#define XPF_V100B_IS_DEADLOCKED(InstancePtr) \ + (XIo_In32((InstancePtr)->RegBaseAddress + XPF_COUNT_STATUS_REG_OFFSET) & \ + XPF_DEADLOCK_MASK) + +/************************** Function Prototypes ******************************/ + +/* Standard functions */ + +XStatus XPacketFifoV100b_Initialize(XPacketFifoV100b * InstancePtr, + u32 RegBaseAddress, u32 DataBaseAddress); +XStatus XPacketFifoV100b_SelfTest(XPacketFifoV100b * InstancePtr, u32 FifoType); + +/* Data functions */ + +XStatus XPacketFifoV100b_Read(XPacketFifoV100b * InstancePtr, + u8 * ReadBufferPtr, u32 ByteCount); +XStatus XPacketFifoV100b_Write(XPacketFifoV100b * InstancePtr, + u8 * WriteBufferPtr, u32 ByteCount); + +#endif /* end of protection macro */ |