diff options
Diffstat (limited to 'board/warp7')
-rw-r--r-- | board/warp7/Kconfig | 9 | ||||
-rw-r--r-- | board/warp7/MAINTAINERS | 6 | ||||
-rw-r--r-- | board/warp7/Makefile | 6 | ||||
-rw-r--r-- | board/warp7/imximage.cfg | 95 | ||||
-rw-r--r-- | board/warp7/warp7.c | 102 |
5 files changed, 218 insertions, 0 deletions
diff --git a/board/warp7/Kconfig b/board/warp7/Kconfig new file mode 100644 index 00000000000..61c33fb53e1 --- /dev/null +++ b/board/warp7/Kconfig @@ -0,0 +1,9 @@ +if TARGET_WARP7 + +config SYS_BOARD + default "warp7" + +config SYS_CONFIG_NAME + default "warp7" + +endif diff --git a/board/warp7/MAINTAINERS b/board/warp7/MAINTAINERS new file mode 100644 index 00000000000..1d3ee292222 --- /dev/null +++ b/board/warp7/MAINTAINERS @@ -0,0 +1,6 @@ +WARP7 BOARD +M: Fabio Estevam <fabio.estevam@nxp.com> +S: Maintained +F: board/warp7/ +F: include/configs/warp7.h +F: configs/warp7_defconfig diff --git a/board/warp7/Makefile b/board/warp7/Makefile new file mode 100644 index 00000000000..f39d1d8f120 --- /dev/null +++ b/board/warp7/Makefile @@ -0,0 +1,6 @@ +# (C) Copyright 2016 NXP Semiconductors +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y := warp7.o diff --git a/board/warp7/imximage.cfg b/board/warp7/imximage.cfg new file mode 100644 index 00000000000..e7b6d30d379 --- /dev/null +++ b/board/warp7/imximage.cfg @@ -0,0 +1,95 @@ +/* + * Copyright (C) 2016 NXP Semiconductors + * + * SPDX-License-Identifier: GPL-2.0 + * + * Refer docs/README.imxmage for more details about how-to configure + * and create imximage boot image + * + * The syntax is taken as close as possible with the kwbimage + */ + +#define __ASSEMBLY__ +#include <config.h> + +IMAGE_VERSION 2 +BOOT_FROM sd + +/* + * Device Configuration Data (DCD) + * + * Each entry must have the format: + * Addr-type Address Value + * + * where: + * Addr-type register length (1,2 or 4 bytes) + * Address absolute address of the register + * value value to be stored in the register + */ + +DATA 4 0x30340004 0x4F400005 + +DATA 4 0x30391000 0x00000002 +DATA 4 0x307a0000 0x03040008 +DATA 4 0x307a0064 0x00200038 +DATA 4 0x307a0490 0x00000001 +DATA 4 0x307a00d0 0x00350001 +DATA 4 0x307a00dc 0x00c3000a +DATA 4 0x307a00e0 0x00010000 +DATA 4 0x307a00e4 0x00110006 +DATA 4 0x307a00f4 0x0000033f +DATA 4 0x307a0100 0x0a0e110b +DATA 4 0x307a0104 0x00020211 +DATA 4 0x307a0108 0x03060708 +DATA 4 0x307a010c 0x00a0500c +DATA 4 0x307a0110 0x05020307 +DATA 4 0x307a0114 0x02020404 +DATA 4 0x307a0118 0x02020003 +DATA 4 0x307a011c 0x00000202 +DATA 4 0x307a0120 0x00000202 + +DATA 4 0x307a0180 0x00600018 +DATA 4 0x307a0184 0x00e00100 +DATA 4 0x307a0190 0x02098205 +DATA 4 0x307a0194 0x00060303 +DATA 4 0x307a01a0 0x80400003 +DATA 4 0x307a01a4 0x00100020 +DATA 4 0x307a01a8 0x80100004 + +DATA 4 0x307a0200 0x00000015 +DATA 4 0x307a0204 0x00161616 +DATA 4 0x307a0210 0x00000f0f +DATA 4 0x307a0214 0x04040404 +DATA 4 0x307a0218 0x0f0f0404 + +DATA 4 0x307a0240 0x06000600 +DATA 4 0x307a0244 0x00000000 +DATA 4 0x30391000 0x00000000 +DATA 4 0x30790000 0x17421e40 +DATA 4 0x30790004 0x10210100 +DATA 4 0x30790008 0x00010000 +DATA 4 0x30790010 0x0007080c +DATA 4 0x307900b0 0x1010007e + +DATA 4 0x3079001C 0x01010000 +DATA 4 0x3079009c 0x00000d6e + +DATA 4 0x30790030 0x06060606 +DATA 4 0x30790020 0x0a0a0a0a +DATA 4 0x30790050 0x01000008 +DATA 4 0x30790050 0x00000008 +DATA 4 0x30790018 0x0000000f +DATA 4 0x307900c0 0x0e487304 +DATA 4 0x307900c0 0x0e4c7304 +DATA 4 0x307900c0 0x0e4c7306 +DATA 4 0x307900c0 0x0e4c7304 + +CHECK_BITS_SET 4 0x307900c4 0x1 + +DATA 4 0x307900c0 0x0e487304 + +DATA 4 0x30384130 0x00000000 +DATA 4 0x30340020 0x00000178 +DATA 4 0x30384130 0x00000002 + +CHECK_BITS_SET 4 0x307a0004 0x1 diff --git a/board/warp7/warp7.c b/board/warp7/warp7.c new file mode 100644 index 00000000000..8c5bf9a5242 --- /dev/null +++ b/board/warp7/warp7.c @@ -0,0 +1,102 @@ +/* + * Copyright (C) 2016 NXP Semiconductors + * Author: Fabio Estevam <fabio.estevam@nxp.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <asm/arch/clock.h> +#include <asm/arch/imx-regs.h> +#include <asm/arch/mx7-pins.h> +#include <asm/arch/sys_proto.h> +#include <asm/gpio.h> +#include <asm/imx-common/iomux-v3.h> +#include <asm/io.h> +#include <common.h> +#include <fsl_esdhc.h> +#include <mmc.h> +#include <asm/arch/crm_regs.h> +#include <usb.h> + +DECLARE_GLOBAL_DATA_PTR; + +#define UART_PAD_CTRL (PAD_CTL_DSE_3P3V_49OHM | PAD_CTL_PUS_PU100KOHM | \ + PAD_CTL_HYS) +#define USDHC_PAD_CTRL (PAD_CTL_DSE_3P3V_32OHM | PAD_CTL_SRE_SLOW | \ + PAD_CTL_HYS | PAD_CTL_PUE | PAD_CTL_PUS_PU47KOHM) + +int dram_init(void) +{ + gd->ram_size = PHYS_SDRAM_SIZE; + + return 0; +} + +static iomux_v3_cfg_t const uart1_pads[] = { + MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL), + MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL), +}; + +static iomux_v3_cfg_t const usdhc3_pads[] = { + MX7D_PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX7D_PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX7D_PAD_SD3_DATA0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX7D_PAD_SD3_DATA1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX7D_PAD_SD3_DATA2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX7D_PAD_SD3_DATA3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX7D_PAD_SD3_DATA4__SD3_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX7D_PAD_SD3_DATA5__SD3_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX7D_PAD_SD3_DATA6__SD3_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX7D_PAD_SD3_DATA7__SD3_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX7D_PAD_SD3_RESET_B__SD3_RESET_B | MUX_PAD_CTRL(USDHC_PAD_CTRL), +}; + +static void setup_iomux_uart(void) +{ + imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads)); +}; + +static struct fsl_esdhc_cfg usdhc_cfg[1] = { + {USDHC3_BASE_ADDR}, +}; + +int board_mmc_getcd(struct mmc *mmc) +{ + /* Assume uSDHC3 emmc is always present */ + return 1; +} + +int board_mmc_init(bd_t *bis) +{ + imx_iomux_v3_setup_multiple_pads(usdhc3_pads, ARRAY_SIZE(usdhc3_pads)); + usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); + + return fsl_esdhc_initialize(bis, &usdhc_cfg[0]); +} + +int board_early_init_f(void) +{ + setup_iomux_uart(); + + return 0; +} + +int board_init(void) +{ + /* address of boot parameters */ + gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; + + return 0; +} + +int checkboard(void) +{ + puts("Board: WARP7\n"); + + return 0; +} + +int board_usb_phy_mode(int port) +{ + return USB_INIT_DEVICE; +} |