diff options
Diffstat (limited to 'board/w7o')
-rw-r--r-- | board/w7o/cmd_vpd.c | 7 | ||||
-rw-r--r-- | board/w7o/config.mk | 1 | ||||
-rw-r--r-- | board/w7o/errors.h | 1 | ||||
-rw-r--r-- | board/w7o/flash.c | 847 | ||||
-rw-r--r-- | board/w7o/fpga.c | 173 | ||||
-rw-r--r-- | board/w7o/fsboot.c | 4 | ||||
-rw-r--r-- | board/w7o/init.S | 1 | ||||
-rw-r--r-- | board/w7o/post1.S | 81 | ||||
-rw-r--r-- | board/w7o/post2.c | 1 | ||||
-rw-r--r-- | board/w7o/u-boot.lds | 5 | ||||
-rw-r--r-- | board/w7o/u-boot.lds.debug | 6 | ||||
-rw-r--r-- | board/w7o/vpd.c | 1 | ||||
-rw-r--r-- | board/w7o/vpd.h | 3 | ||||
-rw-r--r-- | board/w7o/w7o.c | 2 | ||||
-rw-r--r-- | board/w7o/w7o.h | 1 | ||||
-rw-r--r-- | board/w7o/watchdog.c | 1 |
16 files changed, 569 insertions, 566 deletions
diff --git a/board/w7o/cmd_vpd.c b/board/w7o/cmd_vpd.c index 3025699175c..2763a53d03c 100644 --- a/board/w7o/cmd_vpd.c +++ b/board/w7o/cmd_vpd.c @@ -57,4 +57,11 @@ int do_vpd (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) return 1; } +cmd_tbl_t U_BOOT_CMD(vpd) = MK_CMD_ENTRY( + "vpd", 2, 1, do_vpd, + "vpd - Read Vital Product Data\n", + "[dev_addr]\n" + " - Read VPD Data from default address, or device address 'dev_addr'.\n" +); + #endif /* (CONFIG_COMMANDS & CFG_CMD_BSP) */ diff --git a/board/w7o/config.mk b/board/w7o/config.mk index c73329e5b53..bc341ca7557 100644 --- a/board/w7o/config.mk +++ b/board/w7o/config.mk @@ -29,4 +29,3 @@ TEXT_BASE = 0xFFFC0000 #PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(BOARD) - diff --git a/board/w7o/errors.h b/board/w7o/errors.h index d1e5caf84b0..05b4eae4572 100644 --- a/board/w7o/errors.h +++ b/board/w7o/errors.h @@ -95,4 +95,3 @@ Debugging suggestions: (13) SDRAM address shorted or unconnected, check sdram caps */ #endif /* _ERRORS_H_ */ - diff --git a/board/w7o/flash.c b/board/w7o/flash.c index 5651e1cfdd7..d6ea63530c6 100644 --- a/board/w7o/flash.c +++ b/board/w7o/flash.c @@ -50,21 +50,21 @@ unsigned long flash_init (void) /* Init: no FLASHes known */ for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) { - flash_info[i].flash_id = FLASH_UNKNOWN; + flash_info[i].flash_id = FLASH_UNKNOWN; } /* Get Size of Boot and Main Flashes */ size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]); if (flash_info[0].flash_id == FLASH_UNKNOWN) { - printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n", - size_b0, size_b0<<20); - return 0; + printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n", + size_b0, size_b0<<20); + return 0; } size_b1 = flash_get_size((vu_long *)FLASH_BASE1_PRELIM, &flash_info[1]); if (flash_info[1].flash_id == FLASH_UNKNOWN) { - printf ("## Unknown FLASH on Bank 1 - Size = 0x%08lx = %ld MB\n", - size_b1, size_b1<<20); - return 0; + printf ("## Unknown FLASH on Bank 1 - Size = 0x%08lx = %ld MB\n", + size_b1, size_b1<<20); + return 0; } /* Calculate base addresses */ @@ -83,21 +83,21 @@ unsigned long flash_init (void) /* Monitor protection ON by default */ (void)flash_protect(FLAG_PROTECT_SET, - base_b0 + size_b0 - monitor_flash_len, - base_b0 + size_b0 - 1, - &flash_info[0]); + base_b0 + size_b0 - monitor_flash_len, + base_b0 + size_b0 - 1, + &flash_info[0]); /* Protect the FPGA image */ (void)flash_protect(FLAG_PROTECT_SET, - FLASH_BASE1_PRELIM, - FLASH_BASE1_PRELIM + CFG_FPGA_IMAGE_LEN - 1, - &flash_info[1]); + FLASH_BASE1_PRELIM, + FLASH_BASE1_PRELIM + CFG_FPGA_IMAGE_LEN - 1, + &flash_info[1]); /* Protect the default boot image */ (void)flash_protect(FLAG_PROTECT_SET, - FLASH_BASE1_PRELIM + CFG_FPGA_IMAGE_LEN, - FLASH_BASE1_PRELIM + CFG_FPGA_IMAGE_LEN + 0x600000 - 1, - &flash_info[1]); + FLASH_BASE1_PRELIM + CFG_FPGA_IMAGE_LEN, + FLASH_BASE1_PRELIM + CFG_FPGA_IMAGE_LEN + 0x600000 - 1, + &flash_info[1]); /* Setup offsets for Main Flash */ flash_get_offsets (FLASH_BASE1_PRELIM, &flash_info[1]); @@ -113,8 +113,8 @@ static void flash_get_offsets (ulong base, flash_info_t *info) /* set up sector start address table - FOR BOOT ROM ONLY!!! */ if ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM040) { - for (i = 0; i < info->sector_count; i++) - info->start[i] = base + (i * 0x00010000); + for (i = 0; i < info->sector_count; i++) + info->start[i] = base + (i * 0x00010000); } } /* end flash_get_offsets() */ @@ -129,75 +129,75 @@ void flash_print_info (flash_info_t *info) volatile unsigned long *flash; if (info->flash_id == FLASH_UNKNOWN) { - printf ("missing or unknown FLASH type\n"); - return; + printf ("missing or unknown FLASH type\n"); + return; } switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_AMD: printf ("1 x AMD "); break; + case FLASH_MAN_AMD: printf ("1 x AMD "); break; case FLASH_MAN_STM: printf ("1 x STM "); break; - case FLASH_MAN_INTEL: printf ("2 x Intel "); break; - default: printf ("Unknown Vendor "); + case FLASH_MAN_INTEL: printf ("2 x Intel "); break; + default: printf ("Unknown Vendor "); } switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_AM040: + case FLASH_AM040: if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD) - printf ("AM29LV040 (4096 Kbit, uniform sector size)\n"); + printf ("AM29LV040 (4096 Kbit, uniform sector size)\n"); else if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_STM) - printf ("M29W040B (4096 Kbit, uniform block size)\n"); + printf ("M29W040B (4096 Kbit, uniform block size)\n"); else - printf ("UNKNOWN 29x040x (4096 Kbit, uniform sector size)\n"); - break; - case FLASH_28F320J3A: - printf ("28F320J3A (32 Mbit = 128K x 32)\n"); - break; - case FLASH_28F640J3A: - printf ("28F640J3A (64 Mbit = 128K x 64)\n"); - break; - case FLASH_28F128J3A: - printf ("28F128J3A (128 Mbit = 128K x 128)\n"); - break; - default: - printf ("Unknown Chip Type\n"); + printf ("UNKNOWN 29x040x (4096 Kbit, uniform sector size)\n"); + break; + case FLASH_28F320J3A: + printf ("28F320J3A (32 Mbit = 128K x 32)\n"); + break; + case FLASH_28F640J3A: + printf ("28F640J3A (64 Mbit = 128K x 64)\n"); + break; + case FLASH_28F128J3A: + printf ("28F128J3A (128 Mbit = 128K x 128)\n"); + break; + default: + printf ("Unknown Chip Type\n"); } if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_STM) { - printf (" Size: %ld KB in %d Blocks\n", - info->size >> 10, info->sector_count); + printf (" Size: %ld KB in %d Blocks\n", + info->size >> 10, info->sector_count); } else { - printf (" Size: %ld KB in %d Sectors\n", - info->size >> 10, info->sector_count); + printf (" Size: %ld KB in %d Sectors\n", + info->size >> 10, info->sector_count); } printf (" Sector Start Addresses:"); for (i=0; i<info->sector_count; ++i) { - /* - * Check if whole sector is erased - */ - if (i != (info->sector_count-1)) - size = info->start[i+1] - info->start[i]; - else - size = info->start[0] + info->size - info->start[i]; - erased = 1; - flash = (volatile unsigned long *)info->start[i]; - size = size >> 2; /* divide by 4 for longword access */ - for (k=0; k<size; k++) - { - if (*flash++ != 0xffffffff) - { - erased = 0; - break; - } - } - - if ((i % 5) == 0) - printf ("\n "); - printf (" %08lX%s%s", - info->start[i], - erased ? " E" : " ", - info->protect[i] ? "RO " : " " - ); + /* + * Check if whole sector is erased + */ + if (i != (info->sector_count-1)) + size = info->start[i+1] - info->start[i]; + else + size = info->start[0] + info->size - info->start[i]; + erased = 1; + flash = (volatile unsigned long *)info->start[i]; + size = size >> 2; /* divide by 4 for longword access */ + for (k=0; k<size; k++) + { + if (*flash++ != 0xffffffff) + { + erased = 0; + break; + } + } + + if ((i % 5) == 0) + printf ("\n "); + printf (" %08lX%s%s", + info->start[i], + erased ? " E" : " ", + info->protect[i] ? "RO " : " " + ); } printf ("\n"); } /* end flash_print_info() */ @@ -217,130 +217,130 @@ static ulong flash_get_size (vu_long *addr, flash_info_t *info) /* Test for Boot Flash */ if (base == FLASH_BASE0_PRELIM) { - unsigned char value; - volatile unsigned char * addr2 = (unsigned char *)addr; - - /* Write auto select command: read Manufacturer ID */ - *(addr2 + 0x555) = 0xaa; - *(addr2 + 0x2aa) = 0x55; - *(addr2 + 0x555) = 0x90; - - /* Manufacture ID */ - value = *addr2; - switch (value) { - case (unsigned char)AMD_MANUFACT: - info->flash_id = FLASH_MAN_AMD; - break; + unsigned char value; + volatile unsigned char * addr2 = (unsigned char *)addr; + + /* Write auto select command: read Manufacturer ID */ + *(addr2 + 0x555) = 0xaa; + *(addr2 + 0x2aa) = 0x55; + *(addr2 + 0x555) = 0x90; + + /* Manufacture ID */ + value = *addr2; + switch (value) { + case (unsigned char)AMD_MANUFACT: + info->flash_id = FLASH_MAN_AMD; + break; case (unsigned char)STM_MANUFACT: info->flash_id = FLASH_MAN_STM; break; - default: - *addr2 = 0xf0; /* no or unknown flash */ - return 0; - } - - /* Device ID */ - value = *(addr2 + 1); - switch (value) { - case (unsigned char)AMD_ID_LV040B: + default: + *addr2 = 0xf0; /* no or unknown flash */ + return 0; + } + + /* Device ID */ + value = *(addr2 + 1); + switch (value) { + case (unsigned char)AMD_ID_LV040B: case (unsigned char)STM_ID_29W040B: - info->flash_id += FLASH_AM040; - info->sector_count = 8; - info->size = 0x00080000; - break; /* => 512Kb */ - default: - *addr2 = 0xf0; /* => no or unknown flash */ - return 0; - } + info->flash_id += FLASH_AM040; + info->sector_count = 8; + info->size = 0x00080000; + break; /* => 512Kb */ + default: + *addr2 = 0xf0; /* => no or unknown flash */ + return 0; + } } else { /* MAIN Flash */ - unsigned long value; - volatile unsigned long * addr2 = (unsigned long *)addr; - - /* Write auto select command: read Manufacturer ID */ - *addr2 = 0x90909090; - - /* Manufacture ID */ - value = *addr2; - switch (value) { - case (unsigned long)INTEL_MANUFACT: - info->flash_id = FLASH_MAN_INTEL; - break; - default: - *addr2 = 0xff; /* no or unknown flash */ - return 0; - } - - /* Device ID - This shit is interleaved... */ - value = *(addr2 + 1); - switch (value) { - case (unsigned long)INTEL_ID_28F320J3A: - info->flash_id += FLASH_28F320J3A; - info->sector_count = 32; - info->size = 0x00400000 * 2; - break; /* => 2 X 4 MB */ - case (unsigned long)INTEL_ID_28F640J3A: - info->flash_id += FLASH_28F640J3A; - info->sector_count = 64; - info->size = 0x00800000 * 2; - break; /* => 2 X 8 MB */ - case (unsigned long)INTEL_ID_28F128J3A: - info->flash_id += FLASH_28F128J3A; - info->sector_count = 128; - info->size = 0x01000000 * 2; - break; /* => 2 X 16 MB */ - default: - *addr2 = 0xff; /* => no or unknown flash */ - } + unsigned long value; + volatile unsigned long * addr2 = (unsigned long *)addr; + + /* Write auto select command: read Manufacturer ID */ + *addr2 = 0x90909090; + + /* Manufacture ID */ + value = *addr2; + switch (value) { + case (unsigned long)INTEL_MANUFACT: + info->flash_id = FLASH_MAN_INTEL; + break; + default: + *addr2 = 0xff; /* no or unknown flash */ + return 0; + } + + /* Device ID - This shit is interleaved... */ + value = *(addr2 + 1); + switch (value) { + case (unsigned long)INTEL_ID_28F320J3A: + info->flash_id += FLASH_28F320J3A; + info->sector_count = 32; + info->size = 0x00400000 * 2; + break; /* => 2 X 4 MB */ + case (unsigned long)INTEL_ID_28F640J3A: + info->flash_id += FLASH_28F640J3A; + info->sector_count = 64; + info->size = 0x00800000 * 2; + break; /* => 2 X 8 MB */ + case (unsigned long)INTEL_ID_28F128J3A: + info->flash_id += FLASH_28F128J3A; + info->sector_count = 128; + info->size = 0x01000000 * 2; + break; /* => 2 X 16 MB */ + default: + *addr2 = 0xff; /* => no or unknown flash */ + } } /* Make sure we don't exceed CFG_MAX_FLASH_SECT */ if (info->sector_count > CFG_MAX_FLASH_SECT) { - printf ("** ERROR: sector count %d > max (%d) **\n", - info->sector_count, CFG_MAX_FLASH_SECT); - info->sector_count = CFG_MAX_FLASH_SECT; + printf ("** ERROR: sector count %d > max (%d) **\n", + info->sector_count, CFG_MAX_FLASH_SECT); + info->sector_count = CFG_MAX_FLASH_SECT; } /* set up sector start address table */ switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_AM040: - for (i = 0; i < info->sector_count; i++) - info->start[i] = base + (i * 0x00010000); - break; - case FLASH_28F320J3A: - case FLASH_28F640J3A: - case FLASH_28F128J3A: - for (i = 0; i < info->sector_count; i++) - info->start[i] = base + (i * 0x00020000 * 2); /* 2 Banks */ - break; + case FLASH_AM040: + for (i = 0; i < info->sector_count; i++) + info->start[i] = base + (i * 0x00010000); + break; + case FLASH_28F320J3A: + case FLASH_28F640J3A: + case FLASH_28F128J3A: + for (i = 0; i < info->sector_count; i++) + info->start[i] = base + (i * 0x00020000 * 2); /* 2 Banks */ + break; } /* Test for Boot Flash */ if (base == FLASH_BASE0_PRELIM) { - volatile unsigned char *addr2; - /* check for protected sectors */ - for (i = 0; i < info->sector_count; i++) { - /* read sector protection at sector address, (AX .. A0) = 0x02 */ - /* D0 = 1 if protected */ - addr2 = (volatile unsigned char *)(info->start[i]); - info->protect[i] = *(addr2 + 2) & 1; - } - - /* Restore read mode */ - *(unsigned char *)base = 0xF0; /* Reset NORMAL Flash */ + volatile unsigned char *addr2; + /* check for protected sectors */ + for (i = 0; i < info->sector_count; i++) { + /* read sector protection at sector address, (AX .. A0) = 0x02 */ + /* D0 = 1 if protected */ + addr2 = (volatile unsigned char *)(info->start[i]); + info->protect[i] = *(addr2 + 2) & 1; + } + + /* Restore read mode */ + *(unsigned char *)base = 0xF0; /* Reset NORMAL Flash */ } else { /* Main Flash */ - volatile unsigned long *addr2; - /* check for protected sectors */ - for (i = 0; i < info->sector_count; i++) { - /* read sector protection at sector address, (AX .. A0) = 0x02 */ - /* D0 = 1 if protected */ - addr2 = (volatile unsigned long *)(info->start[i]); - info->protect[i] = *(addr2 + 2) & 0x1; - } + volatile unsigned long *addr2; + /* check for protected sectors */ + for (i = 0; i < info->sector_count; i++) { + /* read sector protection at sector address, (AX .. A0) = 0x02 */ + /* D0 = 1 if protected */ + addr2 = (volatile unsigned long *)(info->start[i]); + info->protect[i] = *(addr2 + 2) & 0x1; + } - /* Restore read mode */ - *(unsigned long *)base = 0xFFFFFFFF; /* Reset Flash */ + /* Restore read mode */ + *(unsigned long *)base = 0xFFFFFFFF; /* Reset Flash */ } return (info->size); @@ -357,20 +357,20 @@ static int wait_for_DQ7(ulong addr, uchar cmp_val, ulong tout) /* Loop X times */ for (i = 1; i <= (100 * tout); i++) { /* Wait up to tout ms */ - udelay(10); - /* Pause 10 us */ + udelay(10); + /* Pause 10 us */ - /* Check for completion */ - if ((vaddr[0] & 0x80) == (cmp_val & 0x80)) { - return 0; - } + /* Check for completion */ + if ((vaddr[0] & 0x80) == (cmp_val & 0x80)) { + return 0; + } - /* KEEP THE LUSER HAPPY - Print a dot every 1.1 seconds */ - if (!(i % 110000)) - putc('.'); + /* KEEP THE LUSER HAPPY - Print a dot every 1.1 seconds */ + if (!(i % 110000)) + putc('.'); - /* Kick the dog if needed */ - WATCHDOG_RESET(); + /* Kick the dog if needed */ + WATCHDOG_RESET(); } return 1; @@ -388,70 +388,70 @@ static int flash_erase8(flash_info_t *info, int s_first, int s_last) /* Validate arguments */ if ((s_first < 0) || (s_first > s_last)) { - if (info->flash_id == FLASH_UNKNOWN) - printf ("- missing\n"); - else - printf ("- no sectors to erase\n"); - return 1; + if (info->flash_id == FLASH_UNKNOWN) + printf ("- missing\n"); + else + printf ("- no sectors to erase\n"); + return 1; } /* Check for KNOWN flash type */ if (info->flash_id == FLASH_UNKNOWN) { - printf ("Can't erase unknown flash type - aborted\n"); - return 1; + printf ("Can't erase unknown flash type - aborted\n"); + return 1; } /* Check for protected sectors */ prot = 0; for (sect = s_first; sect <= s_last; ++sect) { - if (info->protect[sect]) - prot++; + if (info->protect[sect]) + prot++; } if (prot) - printf ("- Warning: %d protected sectors will not be erased!\n", prot); + printf ("- Warning: %d protected sectors will not be erased!\n", prot); else - printf ("\n"); + printf ("\n"); /* Start erase on unprotected sectors */ for (sect = s_first; sect <= s_last; sect++) { - if (info->protect[sect] == 0) { /* not protected */ - sector_addr = (uchar *)(info->start[sect]); + if (info->protect[sect] == 0) { /* not protected */ + sector_addr = (uchar *)(info->start[sect]); - if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_STM) + if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_STM) printf("Erasing block %p\n", sector_addr); else printf("Erasing sector %p\n", sector_addr); - /* Disable interrupts which might cause Flash to timeout */ - flag = disable_interrupts(); - - *(addr + 0x555) = (uchar)0xAA; - *(addr + 0x2aa) = (uchar)0x55; - *(addr + 0x555) = (uchar)0x80; - *(addr + 0x555) = (uchar)0xAA; - *(addr + 0x2aa) = (uchar)0x55; - *sector_addr = (uchar)0x30; /* sector erase */ - - /* - * Wait for each sector to complete, it's more - * reliable. According to AMD Spec, you must - * issue all erase commands within a specified - * timeout. This has been seen to fail, especially - * if printf()s are included (for debug)!! - * Takes up to 6 seconds. - */ - tcode = wait_for_DQ7((ulong)sector_addr, 0x80, 6000); - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* Make sure we didn't timeout */ - if (tcode) { - printf ("Timeout\n"); - rcode = 1; - } - } + /* Disable interrupts which might cause Flash to timeout */ + flag = disable_interrupts(); + + *(addr + 0x555) = (uchar)0xAA; + *(addr + 0x2aa) = (uchar)0x55; + *(addr + 0x555) = (uchar)0x80; + *(addr + 0x555) = (uchar)0xAA; + *(addr + 0x2aa) = (uchar)0x55; + *sector_addr = (uchar)0x30; /* sector erase */ + + /* + * Wait for each sector to complete, it's more + * reliable. According to AMD Spec, you must + * issue all erase commands within a specified + * timeout. This has been seen to fail, especially + * if printf()s are included (for debug)!! + * Takes up to 6 seconds. + */ + tcode = wait_for_DQ7((ulong)sector_addr, 0x80, 6000); + + /* re-enable interrupts if necessary */ + if (flag) + enable_interrupts(); + + /* Make sure we didn't timeout */ + if (tcode) { + printf ("Timeout\n"); + rcode = 1; + } + } } /* wait at least 80us - let's wait 1 ms */ @@ -473,68 +473,68 @@ static int flash_erase32(flash_info_t *info, int s_first, int s_last) /* Validate arguments */ if ((s_first < 0) || (s_first > s_last)) { - if (info->flash_id == FLASH_UNKNOWN) - printf ("- missing\n"); - else - printf ("- no sectors to erase\n"); - return 1; + if (info->flash_id == FLASH_UNKNOWN) + printf ("- missing\n"); + else + printf ("- no sectors to erase\n"); + return 1; } /* Check for KNOWN flash type */ if ((info->flash_id & FLASH_VENDMASK) != FLASH_MAN_INTEL) { - printf ("Can erase only Intel flash types - aborted\n"); - return 1; + printf ("Can erase only Intel flash types - aborted\n"); + return 1; } /* Check for protected sectors */ for (sect = s_first; sect <= s_last; ++sect) { - if (info->protect[sect]) - prot++; + if (info->protect[sect]) + prot++; } if (prot) - printf ("- Warning: %d protected sectors will not be erased!\n", prot); + printf ("- Warning: %d protected sectors will not be erased!\n", prot); else - printf ("\n"); + printf ("\n"); start = get_timer (0); last = start; /* Start erase on unprotected sectors */ for (sect = s_first; sect <= s_last; sect++) { - WATCHDOG_RESET(); - if (info->protect[sect] == 0) { /* not protected */ - vu_long *addr = (vu_long *)(info->start[sect]); - unsigned long status; - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - *addr = 0x00500050; /* clear status register */ - *addr = 0x00200020; /* erase setup */ - *addr = 0x00D000D0; /* erase confirm */ - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* Wait at least 80us - let's wait 1 ms */ - udelay (1000); - - while (((status = *addr) & 0x00800080) != 0x00800080) { - if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) { - printf ("Timeout\n"); - *addr = 0x00B000B0; /* suspend erase */ - *addr = 0x00FF00FF; /* reset to read mode */ - return 1; - } - - /* show that we're waiting */ - if ((now - last) > 990) { /* every second */ - putc ('.'); - last = now; - } - } - *addr = 0x00FF00FF; /* reset to read mode */ - } + WATCHDOG_RESET(); + if (info->protect[sect] == 0) { /* not protected */ + vu_long *addr = (vu_long *)(info->start[sect]); + unsigned long status; + + /* Disable interrupts which might cause a timeout here */ + flag = disable_interrupts(); + + *addr = 0x00500050; /* clear status register */ + *addr = 0x00200020; /* erase setup */ + *addr = 0x00D000D0; /* erase confirm */ + + /* re-enable interrupts if necessary */ + if (flag) + enable_interrupts(); + + /* Wait at least 80us - let's wait 1 ms */ + udelay (1000); + + while (((status = *addr) & 0x00800080) != 0x00800080) { + if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) { + printf ("Timeout\n"); + *addr = 0x00B000B0; /* suspend erase */ + *addr = 0x00FF00FF; /* reset to read mode */ + return 1; + } + + /* show that we're waiting */ + if ((now - last) > 990) { /* every second */ + putc ('.'); + last = now; + } + } + *addr = 0x00FF00FF; /* reset to read mode */ + } } printf (" done\n"); return 0; @@ -543,9 +543,9 @@ static int flash_erase32(flash_info_t *info, int s_first, int s_last) int flash_erase(flash_info_t *info, int s_first, int s_last) { if ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM040) - return flash_erase8(info, s_first, s_last); + return flash_erase8(info, s_first, s_last); else - return flash_erase32(info, s_first, s_last); + return flash_erase32(info, s_first, s_last); } /* end flash_erase() */ /*----------------------------------------------------------------------- @@ -563,53 +563,53 @@ static int write_buff8(flash_info_t *info, uchar *src, ulong addr, ulong cnt) start = get_timer (0); wp = (addr & ~3); /* get lower word - aligned address */ + aligned address */ /* * handle unaligned start bytes */ if ((l = addr - wp) != 0) { - data = 0; - for (i=0, cp=wp; i<l; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - for (; i<4 && cnt>0; ++i) { - data = (data << 8) | *src++; - --cnt; - ++cp; - } - for (; cnt==0 && i<4; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - - if ((rc = write_word8(info, wp, data)) != 0) { - return (rc); - } - wp += 4; + data = 0; + for (i=0, cp=wp; i<l; ++i, ++cp) { + data = (data << 8) | (*(uchar *)cp); + } + for (; i<4 && cnt>0; ++i) { + data = (data << 8) | *src++; + --cnt; + ++cp; + } + for (; cnt==0 && i<4; ++i, ++cp) { + data = (data << 8) | (*(uchar *)cp); + } + + if ((rc = write_word8(info, wp, data)) != 0) { + return (rc); + } + wp += 4; } /* * handle word aligned part */ while (cnt >= 4) { - data = 0; - for (i=0; i<4; ++i) { - data = (data << 8) | *src++; - } - if ((rc = write_word8(info, wp, data)) != 0) { - return (rc); - } - wp += 4; - cnt -= 4; - if (get_timer(start) > 1000) { /* every second */ - WATCHDOG_RESET(); - putc ('.'); - start = get_timer(0); - } + data = 0; + for (i=0; i<4; ++i) { + data = (data << 8) | *src++; + } + if ((rc = write_word8(info, wp, data)) != 0) { + return (rc); + } + wp += 4; + cnt -= 4; + if (get_timer(start) > 1000) { /* every second */ + WATCHDOG_RESET(); + putc ('.'); + start = get_timer(0); + } } if (cnt == 0) { - return (0); + return (0); } /* @@ -617,11 +617,11 @@ static int write_buff8(flash_info_t *info, uchar *src, ulong addr, ulong cnt) */ data = 0; for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) { - data = (data << 8) | *src++; - --cnt; + data = (data << 8) | *src++; + --cnt; } for (; i<4; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); + data = (data << 8) | (*(uchar *)cp); } return (write_word8(info, wp, data)); @@ -678,7 +678,7 @@ static int write_buff32 (flash_info_t *info, uchar *src, ulong addr, ulong cnt) } wp += FLASH_WIDTH; cnt -= FLASH_WIDTH; - if (get_timer(start) > 990) { /* every second */ + if (get_timer(start) > 990) { /* every second */ putc ('.'); start = get_timer(0); } @@ -708,9 +708,9 @@ int write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt) int retval; if ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM040) - retval = write_buff8(info, src, addr, cnt); + retval = write_buff8(info, src, addr, cnt); else - retval = write_buff32(info, src, addr, cnt); + retval = write_buff32(info, src, addr, cnt); return retval; } /* end write_buff() */ @@ -732,31 +732,31 @@ static int write_word8(flash_info_t *info, ulong dest, ulong data) /* Check if Flash is (sufficently) erased */ if ((*((volatile uchar *)dest) & - (uchar)data) != (uchar)data) { - return (2); + (uchar)data) != (uchar)data) { + return (2); } for (i=0; i < (4 / sizeof(uchar)); i++) { - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); + /* Disable interrupts which might cause a timeout here */ + flag = disable_interrupts(); - *(addr2 + 0x555) = (uchar)0xAA; - *(addr2 + 0x2aa) = (uchar)0x55; - *(addr2 + 0x555) = (uchar)0xA0; + *(addr2 + 0x555) = (uchar)0xAA; + *(addr2 + 0x2aa) = (uchar)0x55; + *(addr2 + 0x555) = (uchar)0xA0; - dest2[i] = data2[i]; + dest2[i] = data2[i]; - /* Wait for write to complete, up to 1ms */ - tcode = wait_for_DQ7((ulong)&dest2[i], data2[i], 1); + /* Wait for write to complete, up to 1ms */ + tcode = wait_for_DQ7((ulong)&dest2[i], data2[i], 1); - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); + /* re-enable interrupts if necessary */ + if (flag) + enable_interrupts(); - /* Make sure we didn't timeout */ - if (tcode) { - rcode = 1; - } + /* Make sure we didn't timeout */ + if (tcode) { + rcode = 1; + } } return rcode; @@ -771,7 +771,7 @@ static int write_word32(flash_info_t *info, ulong dest, ulong data) /* Check if Flash is (sufficiently) erased */ if ((*addr & data) != data) { - return (2); + return (2); } /* Disable interrupts which might cause a timeout here */ flag = disable_interrupts(); @@ -781,16 +781,16 @@ static int write_word32(flash_info_t *info, ulong dest, ulong data) /* re-enable interrupts if necessary */ if (flag) - enable_interrupts(); + enable_interrupts(); start = get_timer (0); while (((status = *addr) & 0x00800080) != 0x00800080) { - WATCHDOG_RESET(); - if (get_timer(start) > CFG_FLASH_WRITE_TOUT) { - *addr = 0x00FF00FF; /* restore read mode */ - return (1); - } + WATCHDOG_RESET(); + if (get_timer(start) > CFG_FLASH_WRITE_TOUT) { + *addr = 0x00FF00FF; /* restore read mode */ + return (1); + } } *addr = 0x00FF00FF; /* restore read mode */ @@ -808,50 +808,50 @@ static int _flash_protect(flash_info_t *info, long sector) volatile long *addr = (unsigned long *)sector; switch(info->flash_id & FLASH_TYPEMASK) { - case FLASH_28F320J3A: - case FLASH_28F640J3A: - case FLASH_28F128J3A: - /* Disable interrupts which might cause Flash to timeout */ - flag = disable_interrupts(); - - /* Issue command */ - *addr = 0x00500050L; /* Clear the status register */ - *addr = 0x00600060L; /* Set lock bit setup */ - *addr = 0x00010001L; /* Set lock bit confirm */ - - /* Wait for command completion */ - for (i = 0; i < 10; i++) { /* 75us timeout, wait 100us */ - udelay(10); - if ((*addr & 0x00800080L) == 0x00800080L) - break; - } - - /* Not successful? */ - status = *addr; - if (status != 0x00800080L) { - printf("Protect %x sector failed: %x\n", - (uint)sector, (uint)status); - rcode = 1; - } - - /* Restore read mode */ - *addr = 0x00ff00ffL; - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - break; - case FLASH_AM040: /* No soft sector protection */ - break; + case FLASH_28F320J3A: + case FLASH_28F640J3A: + case FLASH_28F128J3A: + /* Disable interrupts which might cause Flash to timeout */ + flag = disable_interrupts(); + + /* Issue command */ + *addr = 0x00500050L; /* Clear the status register */ + *addr = 0x00600060L; /* Set lock bit setup */ + *addr = 0x00010001L; /* Set lock bit confirm */ + + /* Wait for command completion */ + for (i = 0; i < 10; i++) { /* 75us timeout, wait 100us */ + udelay(10); + if ((*addr & 0x00800080L) == 0x00800080L) + break; + } + + /* Not successful? */ + status = *addr; + if (status != 0x00800080L) { + printf("Protect %x sector failed: %x\n", + (uint)sector, (uint)status); + rcode = 1; + } + + /* Restore read mode */ + *addr = 0x00ff00ffL; + + /* re-enable interrupts if necessary */ + if (flag) + enable_interrupts(); + + break; + case FLASH_AM040: /* No soft sector protection */ + break; } /* Turn protection on for this sector */ for (i = 0; i < info->sector_count; i++) { - if (info->start[i] == sector) { - info->protect[i] = 1; - break; - } + if (info->start[i] == sector) { + info->protect[i] = 1; + break; + } } return rcode; @@ -866,42 +866,42 @@ static int _flash_unprotect(flash_info_t *info, long sector) volatile long *addr = (unsigned long *)sector; switch(info->flash_id & FLASH_TYPEMASK) { - case FLASH_28F320J3A: - case FLASH_28F640J3A: - case FLASH_28F128J3A: - /* Disable interrupts which might cause Flash to timeout */ - flag = disable_interrupts(); - - *addr = 0x00500050L; /* Clear the status register */ - *addr = 0x00600060L; /* Clear lock bit setup */ - *addr = 0x00D000D0L; /* Clear lock bit confirm */ - - /* Wait for command completion */ - for (i = 0; i < 80 ; i++) { /* 700ms timeout, wait 800 */ - udelay(10000); /* Delay 10ms */ - if ((*addr & 0x00800080L) == 0x00800080L) - break; - } - - /* Not successful? */ - status = *addr; - if (status != 0x00800080L) { - printf("Un-protect %x sector failed: %x\n", - (uint)sector, (uint)status); - *addr = 0x00ff00ffL; - rcode = 1; - } - - /* restore read mode */ - *addr = 0x00ff00ffL; - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - break; - case FLASH_AM040: /* No soft sector protection */ - break; + case FLASH_28F320J3A: + case FLASH_28F640J3A: + case FLASH_28F128J3A: + /* Disable interrupts which might cause Flash to timeout */ + flag = disable_interrupts(); + + *addr = 0x00500050L; /* Clear the status register */ + *addr = 0x00600060L; /* Clear lock bit setup */ + *addr = 0x00D000D0L; /* Clear lock bit confirm */ + + /* Wait for command completion */ + for (i = 0; i < 80 ; i++) { /* 700ms timeout, wait 800 */ + udelay(10000); /* Delay 10ms */ + if ((*addr & 0x00800080L) == 0x00800080L) + break; + } + + /* Not successful? */ + status = *addr; + if (status != 0x00800080L) { + printf("Un-protect %x sector failed: %x\n", + (uint)sector, (uint)status); + *addr = 0x00ff00ffL; + rcode = 1; + } + + /* restore read mode */ + *addr = 0x00ff00ffL; + + /* re-enable interrupts if necessary */ + if (flag) + enable_interrupts(); + + break; + case FLASH_AM040: /* No soft sector protection */ + break; } /* @@ -910,14 +910,14 @@ static int _flash_unprotect(flash_info_t *info, long sector) * protection on a specific sector. */ for (i = 0; i < info->sector_count; i++) { - if (info->start[i] != sector) { - if (info->protect[i]) { - if (_flash_protect(info, info->start[i])) - rcode = 1; + if (info->start[i] != sector) { + if (info->protect[i]) { + if (_flash_protect(info, info->start[i])) + rcode = 1; } - } - else /* Turn protection off for this sector */ - info->protect[i] = 0; + } + else /* Turn protection off for this sector */ + info->protect[i] = 0; } return rcode; @@ -929,13 +929,12 @@ int flash_real_protect(flash_info_t *info, long sector, int prot) int rcode; if (prot) - rcode = _flash_protect(info, info->start[sector]); + rcode = _flash_protect(info, info->start[sector]); else - rcode = _flash_unprotect(info, info->start[sector]); + rcode = _flash_unprotect(info, info->start[sector]); return rcode; } /* end flash_real_protect() */ /*----------------------------------------------------------------------- */ - diff --git a/board/w7o/fpga.c b/board/w7o/fpga.c index e84123b907e..97af9242946 100644 --- a/board/w7o/fpga.c +++ b/board/w7o/fpga.c @@ -36,11 +36,11 @@ fpga_img_write(unsigned long *src, unsigned long len, unsigned short *daddr) volatile unsigned short *dest = daddr; /* volatile-bypass optimizer */ for (i = 0; i < len; i++, src++) { - val = *src; - *dest = (unsigned short)((val & 0xff000000L) >> 16); - *dest = (unsigned short)((val & 0x00ff0000L) >> 8); - *dest = (unsigned short)(val & 0x0000ff00L); - *dest = (unsigned short)((val & 0x000000ffL) << 8); + val = *src; + *dest = (unsigned short)((val & 0xff000000L) >> 16); + *dest = (unsigned short)((val & 0x00ff0000L) >> 8); + *dest = (unsigned short)(val & 0x0000ff00L); + *dest = (unsigned short)((val & 0x000000ffL) << 8); } /* Terminate programming with 4 C clocks */ @@ -88,14 +88,14 @@ fpgaDownload(unsigned char *saddr, /* Wait for FPGA init line */ while(in32(IBM405GP_GPIO0_IR) & GPIO_XCV_INIT) { /* Wait INIT line low */ - /* Check for timeout - 100us max, so use 3ms */ - if (get_timer(start) > 3) { - printf(" failed to start init.\n"); - log_warn(ERR_XINIT0); /* Don't halt */ - - /* Reset line stays low */ - goto done; /* I like gotos... */ - } + /* Check for timeout - 100us max, so use 3ms */ + if (get_timer(start) > 3) { + printf(" failed to start init.\n"); + log_warn(ERR_XINIT0); /* Don't halt */ + + /* Reset line stays low */ + goto done; /* I like gotos... */ + } } /* Unreset FPGA */ @@ -105,75 +105,75 @@ fpgaDownload(unsigned char *saddr, /* Wait for FPGA end of init period . */ while(!(in32(IBM405GP_GPIO0_IR) & GPIO_XCV_INIT)) { /* Wait for INIT hi */ - /* Check for timeout */ - if (get_timer(start) > 3) { - printf(" failed to exit init.\n"); - log_warn(ERR_XINIT1); + /* Check for timeout */ + if (get_timer(start) > 3) { + printf(" failed to exit init.\n"); + log_warn(ERR_XINIT1); - /* Reset FPGA */ - grego &= ~GPIO_XCV_PROG; /* PROG line low */ - out32(IBM405GP_GPIO0_OR, grego); + /* Reset FPGA */ + grego &= ~GPIO_XCV_PROG; /* PROG line low */ + out32(IBM405GP_GPIO0_OR, grego); - goto done; - } + goto done; + } } /* Now program FPGA ... */ ndest = dest; for (i = 0; i < CONFIG_NUM_FPGAS; i++) { - /* Toggle IRQ/GPIO */ - greg = mfdcr(CPC0_CR0); /* get chip ctrl register */ - greg |= eirq; /* toggle irq/gpio */ - mtdcr(CPC0_CR0, greg); /* ... just do it */ - - /* turn on open drain for CNFG */ - greg = in32(IBM405GP_GPIO0_ODR); /* get open drain register */ - greg |= cnfg; /* CNFG open drain */ - out32(IBM405GP_GPIO0_ODR, greg); /* .. just do it */ - - /* Turn output enable on for CNFG */ - greg = in32(IBM405GP_GPIO0_TCR); /* get tristate register */ - greg |= cnfg; /* CNFG tristate inactive */ - out32(IBM405GP_GPIO0_TCR, greg); /* ... just do it */ - - /* Setup FPGA for programming */ - grego &= ~cnfg; /* CONFIG line low */ - out32(IBM405GP_GPIO0_OR, grego); - - /* - * Program the FPGA - */ - printf("\n destination: 0x%lx ", (unsigned long)ndest); - - fpga_img_write(source, length, (unsigned short *)ndest); - - /* Done programming */ - grego |= cnfg; /* CONFIG line high */ - out32(IBM405GP_GPIO0_OR, grego); - - /* Turn output enable OFF for CNFG */ - greg = in32(IBM405GP_GPIO0_TCR); /* get tristate register */ - greg &= ~cnfg; /* CNFG tristate inactive */ - out32(IBM405GP_GPIO0_TCR, greg); /* ... just do it */ - - /* Toggle IRQ/GPIO */ - greg = mfdcr(CPC0_CR0); /* get chip ctrl register */ - greg &= ~eirq; /* toggle irq/gpio */ - mtdcr(CPC0_CR0, greg); /* ... just do it */ - - ndest = (unsigned short *)((char *)ndest + 0x00100000L); /* XXX - Next FPGA addr */ - cnfg >>= 1; /* XXX - Next */ - eirq >>= 1; + /* Toggle IRQ/GPIO */ + greg = mfdcr(CPC0_CR0); /* get chip ctrl register */ + greg |= eirq; /* toggle irq/gpio */ + mtdcr(CPC0_CR0, greg); /* ... just do it */ + + /* turn on open drain for CNFG */ + greg = in32(IBM405GP_GPIO0_ODR); /* get open drain register */ + greg |= cnfg; /* CNFG open drain */ + out32(IBM405GP_GPIO0_ODR, greg); /* .. just do it */ + + /* Turn output enable on for CNFG */ + greg = in32(IBM405GP_GPIO0_TCR); /* get tristate register */ + greg |= cnfg; /* CNFG tristate inactive */ + out32(IBM405GP_GPIO0_TCR, greg); /* ... just do it */ + + /* Setup FPGA for programming */ + grego &= ~cnfg; /* CONFIG line low */ + out32(IBM405GP_GPIO0_OR, grego); + + /* + * Program the FPGA + */ + printf("\n destination: 0x%lx ", (unsigned long)ndest); + + fpga_img_write(source, length, (unsigned short *)ndest); + + /* Done programming */ + grego |= cnfg; /* CONFIG line high */ + out32(IBM405GP_GPIO0_OR, grego); + + /* Turn output enable OFF for CNFG */ + greg = in32(IBM405GP_GPIO0_TCR); /* get tristate register */ + greg &= ~cnfg; /* CNFG tristate inactive */ + out32(IBM405GP_GPIO0_TCR, greg); /* ... just do it */ + + /* Toggle IRQ/GPIO */ + greg = mfdcr(CPC0_CR0); /* get chip ctrl register */ + greg &= ~eirq; /* toggle irq/gpio */ + mtdcr(CPC0_CR0, greg); /* ... just do it */ + + ndest = (unsigned short *)((char *)ndest + 0x00100000L); /* XXX - Next FPGA addr */ + cnfg >>= 1; /* XXX - Next */ + eirq >>= 1; } /* Terminate programming with 4 C clocks */ ndest = dest; for (i = 0; i < CONFIG_NUM_FPGAS; i++) { - val = *ndest; - val = *ndest; - val = *ndest; - val = *ndest; - ndest = (unsigned short *)((char *)ndest + 0x00100000L); + val = *ndest; + val = *ndest; + val = *ndest; + val = *ndest; + ndest = (unsigned short *)((char *)ndest + 0x00100000L); } /* Setup timer */ @@ -182,17 +182,17 @@ fpgaDownload(unsigned char *saddr, /* Wait for FPGA end of programming period . */ while(!(in32(IBM405GP_GPIO0_IR) & GPIO_XCV_DONE)) { /* Test DONE low */ - /* Check for timeout */ - if (get_timer(start) > 3) { - printf(" done failed to come high.\n"); - log_warn(ERR_XDONE1); + /* Check for timeout */ + if (get_timer(start) > 3) { + printf(" done failed to come high.\n"); + log_warn(ERR_XDONE1); - /* Reset FPGA */ - grego &= ~GPIO_XCV_PROG; /* PROG line low */ - out32(IBM405GP_GPIO0_OR, grego); + /* Reset FPGA */ + grego &= ~GPIO_XCV_PROG; /* PROG line low */ + out32(IBM405GP_GPIO0_OR, grego); - goto done; - } + goto done; + } } printf("\n FPGA load succeeded\n"); @@ -236,7 +236,7 @@ int init_fpga(void) /* Pedantic */ if ((len < 0x133A4) || (len > 0x80000)) - goto bad_image; + goto bad_image; /* * Get the file name pointer and length. @@ -260,16 +260,16 @@ int init_fpga(void) */ calc_crc = crc32(0, xcv_buf, xcv_len); if (crc != calc_crc) { - printf("\nfailed - bad CRC\n"); - goto done; + printf("\nfailed - bad CRC\n"); + goto done; } /* Output the file name */ printf("file name : "); for (i=0;i<fn_len;i++) { - bufchar = fn_buf[+i]; - if (bufchar<' ' || bufchar>'~') bufchar = '.'; - putc(bufchar); + bufchar = fn_buf[+i]; + if (bufchar<' ' || bufchar>'~') bufchar = '.'; + putc(bufchar); } /* @@ -326,7 +326,7 @@ int init_fpga(void) * Program the FPGA. */ retval = fpgaDownload((unsigned char*)xcv_buf, xcv_len, - (unsigned short *)0xfd000000L); + (unsigned short *)0xfd000000L); return retval; bad_image: @@ -377,4 +377,3 @@ void test_fpga(unsigned short *daddr) printf(" FPGA ready\n"); return; } - diff --git a/board/w7o/fsboot.c b/board/w7o/fsboot.c index 800583d4a58..0ef9a61be64 100644 --- a/board/w7o/fsboot.c +++ b/board/w7o/fsboot.c @@ -24,11 +24,12 @@ #include <common.h> #include <config.h> #include <command.h> -#include <cmd_elf.h> /* * FIXME: Add code to test image and it's header. */ +extern int valid_elf_image (unsigned long addr); + static int image_check(ulong addr) { @@ -87,4 +88,3 @@ init_fsboot(void) return; } - diff --git a/board/w7o/init.S b/board/w7o/init.S index 511a1bb52e3..35d7dbceb4b 100644 --- a/board/w7o/init.S +++ b/board/w7o/init.S @@ -262,4 +262,3 @@ sdram_init: blr /* Return to calling function */ .Lfe1: .size sdram_init,.Lfe1-sdram_init /* end sdram_init() */ - diff --git a/board/w7o/post1.S b/board/w7o/post1.S index d510cca1f6c..21d206e7cf6 100644 --- a/board/w7o/post1.S +++ b/board/w7o/post1.S @@ -282,7 +282,7 @@ outside: addi r31, 0, 0x00ff /* r31 = one byte of set bits */ stb r31,0(r28) /* save ff in referance address */ - /* ghost (inner) loop, now check all posible ghosted addresses */ + /* ghost (inner) loop, now check all posible ghosted addresses */ addi r29, 0, 0 /* start ghosted loop counter at 0 */ inside: /* @@ -323,11 +323,11 @@ Casper: /* we found a ghost !! */ addi r3, 0, ERR_ADDF /* get indexed error message */ bl log_err /* log error led error code */ gb_done: /* pack your bags, and go home */ - lmw r25, 8(r1) /* restore r25 - r31 from stack */ - lwz r0, +40(r1) /* Get saved link register */ - addi r1, r1, +36 /* Remove frame from stack */ - mtlr r0 /* Restore link register */ - blr /* Return to calling function */ + lmw r25, 8(r1) /* restore r25 - r31 from stack */ + lwz r0, +40(r1) /* Get saved link register */ + addi r1, r1, +36 /* Remove frame from stack */ + mtlr r0 /* Restore link register */ + blr /* Return to calling function */ /**************************************************** ******** SDRAM data fill tests ********** @@ -373,7 +373,6 @@ Bit_Buster: blr /* Return to calling function */ - /**************************************************** ******** fill test ******** ***************************************************/ @@ -382,12 +381,12 @@ Bit_Buster: /* r4 = Value to write */ /* r3 = Error code */ fill_test: - mflr r0 /* Get link register */ - stwu r1, -32(r1) /* Save back chain and move SP */ - stw r0, +36(r1) /* Save link register */ - stmw r27, 8(r1) /* save r27 - r31 on stack */ - /* r31 - scratch register */ - /* r30 - memory address */ + mflr r0 /* Get link register */ + stwu r1, -32(r1) /* Save back chain and move SP */ + stw r0, +36(r1) /* Save link register */ + stmw r27, 8(r1) /* save r27 - r31 on stack */ + /* r31 - scratch register */ + /* r30 - memory address */ mr r27, r3 mr r28, r4 mr r29, r5 @@ -412,8 +411,8 @@ ft_0a: bdnz ft_0 /* Round and round... */ mtctr r31 /* setup counter */ addi r30, 0, 0 /* Make r30 = addr 0 */ ft_1: lwz r31, 0(r30) /* get value from memory */ - xor. r31, r31, r28 /* Writen = Read ? */ - bne ft_err /* If bad, than halt */ + xor. r31, r31, r28 /* Writen = Read ? */ + bne ft_err /* If bad, than halt */ addi r30, r30, 4 /* Increment to next word */ andi. r31, r30, 0xffff /* check for 2^16 loops*/ bne ft_1a /* if not there, then skip */ @@ -431,11 +430,11 @@ ft_err: addi r29, r27, 0 /* save current led code */ bl log_err /* output led err code, halt CPU */ fill_done: - lmw r27, 8(r1) /* restore r27 - r31 from stack */ - lwz r0, +36(r1) /* Get saved link register */ - addi r1, r1, +32 /* Remove frame from stack */ - mtlr r0 /* Restore link register */ - blr /* Return to calling function */ + lmw r27, 8(r1) /* restore r27 - r31 from stack */ + lwz r0, +36(r1) /* Get saved link register */ + addi r1, r1, +32 /* Remove frame from stack */ + mtlr r0 /* Restore link register */ + blr /* Return to calling function */ /**************************************************** @@ -563,7 +562,7 @@ log_warn: /* output a warning, then continue with operations */ mtctr r3 log_2: WATCHDOG_RESET /* this keeps dog from barking, */ - /* and takes time */ + /* and takes time */ bdnz log_2 /* loop till time expires */ /* restore stack and return */ @@ -585,27 +584,27 @@ temp_uart_init: stwu r1, -8(r1) /* Save back chain and move SP */ stw r0, +12(r1) /* Save link register */ - addis r3, 0, 0xef60 - ori r3, r3, 0x0303 /* r3 = UART0_LCR */ - addi r4, 0, 0x83 /* n81 format, divisor regs enabled */ - stb r4, 0(r3) + addis r3, 0, 0xef60 + ori r3, r3, 0x0303 /* r3 = UART0_LCR */ + addi r4, 0, 0x83 /* n81 format, divisor regs enabled */ + stb r4, 0(r3) /* set baud rate to use internal clock, baud = (200e6/16)/31/42 = 9600 */ - addis r3, 0, 0xef60 /* Address of baud divisor reg */ - ori r3, r3, 0x0300 /* UART0_DLM */ - addi r4, 0, +42 /* uart baud divisor LSB = 93 */ - stb r4, 0(r3) /* baud = (200 /16)/14/93 */ + addis r3, 0, 0xef60 /* Address of baud divisor reg */ + ori r3, r3, 0x0300 /* UART0_DLM */ + addi r4, 0, +42 /* uart baud divisor LSB = 93 */ + stb r4, 0(r3) /* baud = (200 /16)/14/93 */ - addi r3, r3, 0x0001 /* uart baud divisor addr */ - addi r4, 0, 0 - stb r4, 0(r3) /* Divisor Latch MSB = 0 */ + addi r3, r3, 0x0001 /* uart baud divisor addr */ + addi r4, 0, 0 + stb r4, 0(r3) /* Divisor Latch MSB = 0 */ - addis r3, 0, 0xef60 - ori r3, r3, 0x0303 /* r3 = UART0_LCR */ - addi r4, 0, 0x03 /* n81 format, tx/rx regs enabled */ - stb r4, 0(r3) + addis r3, 0, 0xef60 + ori r3, r3, 0x0303 /* r3 = UART0_LCR */ + addi r4, 0, 0x03 /* n81 format, tx/rx regs enabled */ + stb r4, 0(r3) /* output a few line feeds */ addi r3, 0, '\n' /* load line feed */ @@ -613,7 +612,7 @@ temp_uart_init: addi r3, 0, '\n' /* load line feed */ bl post_putc /* output the char */ - /* restore stack and return */ + /* restore stack and return */ lwz r0, +12(r1) /* Get saved link register */ mtlr r0 /* Restore link register */ addi r1, r1, +8 /* Remove frame from stack */ @@ -633,7 +632,7 @@ post_putc: stw r0, +24(r1) /* Save link register */ stmw r29, 8(r1) /* save r29 - r31 on stack r31 - uart base address - r30 - delay counter + r30 - delay counter r29 - scratch reg */ addis r31, 0, 0xef60 /* Point to uart base */ @@ -687,7 +686,7 @@ pputs_err: b pputs_end /* were outa here */ pputs_term: addi r3, 0, 1 /* set success code */ - /* restore stack and return */ + /* restore stack and return */ pputs_end: lwz r31, 8(r1) /* restore r27 - r31 from stack */ lwz r0, +16(r1) /* Get saved link register */ @@ -696,7 +695,6 @@ pputs_end: blr /* Return to calling function */ - /******************************************************************** ***** disp_hex ***** Routine to display a hex value from a register. @@ -736,10 +734,9 @@ pputh_skip: pputh_err: addi r3, 0, -1 /* set error code */ pputh_done: - /* restore stack and return */ + /* restore stack and return */ lmw r30, 8(r1) /* restore r30 - r31 from stack */ lwz r0, +20(r1) /* Get saved link register */ addi r1, r1, +16 /* Remove frame from stack */ mtlr r0 /* Restore link register */ blr /* Return to calling function */ - diff --git a/board/w7o/post2.c b/board/w7o/post2.c index 271c197f06b..e590128244e 100644 --- a/board/w7o/post2.c +++ b/board/w7o/post2.c @@ -106,4 +106,3 @@ void post2(void) if(dtt_test(4) != 0) log_warn(ERR_Ttest1); #endif /* CONFIG_DTT_LM75 */ } /* post2() */ - diff --git a/board/w7o/u-boot.lds b/board/w7o/u-boot.lds index 4c753fc48fc..5576ab9a67a 100644 --- a/board/w7o/u-boot.lds +++ b/board/w7o/u-boot.lds @@ -103,6 +103,11 @@ SECTIONS _edata = .; PROVIDE (edata = .); + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + __start___ex_table = .; __ex_table : { *(__ex_table) } __stop___ex_table = .; diff --git a/board/w7o/u-boot.lds.debug b/board/w7o/u-boot.lds.debug index 6f65aa57d8b..f996db30ad6 100644 --- a/board/w7o/u-boot.lds.debug +++ b/board/w7o/u-boot.lds.debug @@ -106,6 +106,11 @@ SECTIONS _edata = .; PROVIDE (edata = .); + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + __start___ex_table = .; __ex_table : { *(__ex_table) } __stop___ex_table = .; @@ -128,4 +133,3 @@ SECTIONS _end = . ; PROVIDE (end = .); } - diff --git a/board/w7o/vpd.c b/board/w7o/vpd.c index c24b127d3cf..fc2cd983215 100644 --- a/board/w7o/vpd.c +++ b/board/w7o/vpd.c @@ -405,4 +405,3 @@ void vpd_print(VPD *vpdInfo) printf(dsfmt, sp, "WE Data Width", vpdInfo->flashCfg.weDataWidth); } } /* vpd_print() */ - diff --git a/board/w7o/vpd.h b/board/w7o/vpd.h index 35bbe3e62dd..1b71c8d0fa3 100644 --- a/board/w7o/vpd.h +++ b/board/w7o/vpd.h @@ -93,7 +93,7 @@ typedef struct vpd_header { #define VPD_DATA_SIZE (VPD_MAX_EEPROM_SIZE - SDRAM_SPD_DATA_SIZE - \ - sizeof(vpd_header_t)) + sizeof(vpd_header_t)) typedef struct vpd_s { vpd_header_t header; unsigned char packets[VPD_DATA_SIZE]; @@ -132,4 +132,3 @@ extern int vpd_get_data(unsigned char dev_addr, VPD *vpd); extern void vpd_print(VPD *vpdInfo); #endif /* _VPD_H_ */ - diff --git a/board/w7o/w7o.c b/board/w7o/w7o.c index b404d61c1a2..bb52236d69a 100644 --- a/board/w7o/w7o.c +++ b/board/w7o/w7o.c @@ -22,6 +22,7 @@ */ #include <common.h> +#include <command.h> #include "w7o.h" #include <asm/processor.h> @@ -268,4 +269,3 @@ int misc_init_r (void) return (0); } - diff --git a/board/w7o/w7o.h b/board/w7o/w7o.h index f0af2d6fa1b..84581664e81 100644 --- a/board/w7o/w7o.h +++ b/board/w7o/w7o.h @@ -90,4 +90,3 @@ extern int temp_uart_init(void); extern void init_fsboot(void); #endif /* _W7O_H_ */ - diff --git a/board/w7o/watchdog.c b/board/w7o/watchdog.c index 3fca5d3f353..4bbd94f6084 100644 --- a/board/w7o/watchdog.c +++ b/board/w7o/watchdog.c @@ -45,4 +45,3 @@ void hw_watchdog_reset(void) } /* hw_watchdog_reset() */ #endif /* CONFIG_HW_WATCHDOG */ - |