summaryrefslogtreecommitdiff
path: root/board/tqc/tqm834x/pci.c
diff options
context:
space:
mode:
Diffstat (limited to 'board/tqc/tqm834x/pci.c')
-rw-r--r--board/tqc/tqm834x/pci.c220
1 files changed, 220 insertions, 0 deletions
diff --git a/board/tqc/tqm834x/pci.c b/board/tqc/tqm834x/pci.c
new file mode 100644
index 0000000000..e3d0309d90
--- /dev/null
+++ b/board/tqc/tqm834x/pci.c
@@ -0,0 +1,220 @@
+/*
+ * (C) Copyright 2005
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <asm/mmu.h>
+#include <common.h>
+#include <pci.h>
+
+#ifdef CONFIG_PCI
+
+/* System RAM mapped to PCI space */
+#define CONFIG_PCI_SYS_MEM_BUS CFG_SDRAM_BASE
+#define CONFIG_PCI_SYS_MEM_PHYS CFG_SDRAM_BASE
+#define CONFIG_PCI_SYS_MEM_SIZE (1024 * 1024 * 1024)
+
+#ifndef CONFIG_PCI_PNP
+static struct pci_config_table pci_tqm834x_config_table[] = {
+ {PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
+ PCI_IDSEL_NUMBER, PCI_ANY_ID,
+ pci_cfgfunc_config_device, {PCI_ENET0_IOADDR,
+ PCI_ENET0_MEMADDR,
+ PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER
+ }
+ },
+ {}
+};
+#endif
+
+static struct pci_controller pci1_hose = {
+#ifndef CONFIG_PCI_PNP
+ config_table:pci_tqm834x_config_table,
+#endif
+};
+
+
+/**************************************************************************
+ * pci_init_board()
+ *
+ * NOTICE: MPC8349 internally has two PCI controllers (PCI1 and PCI2) but since
+ * per TQM834x design physical connections to external devices (PCI sockets)
+ * are routed only to the PCI1 we do not account for the second one - this code
+ * supports PCI1 module only. Should support for the PCI2 be required in the
+ * future it needs a separate pci_controller structure (above) and handling -
+ * please refer to other boards' implementation for dual PCI host controllers,
+ * for example board/Marvell/db64360/pci.c, pci_init_board()
+ *
+ */
+void
+pci_init_board(void)
+{
+ volatile immap_t * immr;
+ volatile clk83xx_t * clk;
+ volatile law83xx_t * pci_law;
+ volatile pot83xx_t * pci_pot;
+ volatile pcictrl83xx_t * pci_ctrl;
+ volatile pciconf83xx_t * pci_conf;
+ u16 reg16;
+ u32 reg32;
+ struct pci_controller * hose;
+
+ immr = (immap_t *)CFG_IMMR;
+ clk = (clk83xx_t *)&immr->clk;
+ pci_law = immr->sysconf.pcilaw;
+ pci_pot = immr->ios.pot;
+ pci_ctrl = immr->pci_ctrl;
+ pci_conf = immr->pci_conf;
+
+ hose = &pci1_hose;
+
+ /*
+ * Configure PCI controller and PCI_CLK_OUTPUT
+ */
+
+ /*
+ * WARNING! only PCI_CLK_OUTPUT1 is enabled here as this is the one
+ * line actually used for clocking all external PCI devices in TQM83xx.
+ * Enabling other PCI_CLK_OUTPUT lines may lead to board's hang for
+ * unknown reasons - particularly PCI_CLK_OUTPUT6 and PCI_CLK_OUTPUT7
+ * are known to hang the board; this issue is under investigation
+ * (13 oct 05)
+ */
+ reg32 = OCCR_PCICOE1;
+#if 0
+ /* enabling all PCI_CLK_OUTPUT lines HANGS the board... */
+ reg32 = 0xff000000;
+#endif
+ if (clk->spmr & SPMR_CKID) {
+ /* PCI Clock is half CONFIG_83XX_CLKIN so need to set up OCCR
+ * fields accordingly */
+ reg32 |= (OCCR_PCI1CR | OCCR_PCI2CR);
+
+ reg32 |= (OCCR_PCICD0 | OCCR_PCICD1 | OCCR_PCICD2 \
+ | OCCR_PCICD3 | OCCR_PCICD4 | OCCR_PCICD5 \
+ | OCCR_PCICD6 | OCCR_PCICD7);
+ }
+
+ clk->occr = reg32;
+ udelay(2000);
+
+ /*
+ * Release PCI RST Output signal
+ */
+ pci_ctrl[0].gcr = 0;
+ udelay(2000);
+ pci_ctrl[0].gcr = 1;
+ udelay(2000);
+
+ /*
+ * Configure PCI Local Access Windows
+ */
+ pci_law[0].bar = CFG_PCI1_MEM_PHYS & LAWBAR_BAR;
+ pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_512M;
+
+ pci_law[1].bar = CFG_PCI1_IO_PHYS & LAWBAR_BAR;
+ pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_16M;
+
+ /*
+ * Configure PCI Outbound Translation Windows
+ */
+
+ /* PCI1 mem space */
+ pci_pot[0].potar = (CFG_PCI1_MEM_BASE >> 12) & POTAR_TA_MASK;
+ pci_pot[0].pobar = (CFG_PCI1_MEM_PHYS >> 12) & POBAR_BA_MASK;
+ pci_pot[0].pocmr = POCMR_EN | (POCMR_CM_512M & POCMR_CM_MASK);
+
+ /* PCI1 IO space */
+ pci_pot[1].potar = (CFG_PCI1_IO_BASE >> 12) & POTAR_TA_MASK;
+ pci_pot[1].pobar = (CFG_PCI1_IO_PHYS >> 12) & POBAR_BA_MASK;
+ pci_pot[1].pocmr = POCMR_EN | POCMR_IO | (POCMR_CM_16M & POCMR_CM_MASK);
+
+ /*
+ * Configure PCI Inbound Translation Windows
+ */
+
+ /* we need RAM mapped to PCI space for the devices to
+ * access main memory */
+ pci_ctrl[0].pitar1 = 0x0;
+ pci_ctrl[0].pibar1 = 0x0;
+ pci_ctrl[0].piebar1 = 0x0;
+ pci_ctrl[0].piwar1 = PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP | PIWAR_IWS_256M;
+
+ hose->first_busno = 0;
+ hose->last_busno = 0xff;
+
+ /* PCI memory space */
+ pci_set_region(hose->regions + 0,
+ CFG_PCI1_MEM_BASE,
+ CFG_PCI1_MEM_PHYS,
+ CFG_PCI1_MEM_SIZE,
+ PCI_REGION_MEM);
+
+ /* PCI IO space */
+ pci_set_region(hose->regions + 1,
+ CFG_PCI1_IO_BASE,
+ CFG_PCI1_IO_PHYS,
+ CFG_PCI1_IO_SIZE,
+ PCI_REGION_IO);
+
+ /* System memory space */
+ pci_set_region(hose->regions + 2,
+ CONFIG_PCI_SYS_MEM_BUS,
+ CONFIG_PCI_SYS_MEM_PHYS,
+ CONFIG_PCI_SYS_MEM_SIZE,
+ PCI_REGION_MEM | PCI_REGION_MEMORY);
+
+ hose->region_count = 3;
+
+ pci_setup_indirect(hose,
+ (CFG_IMMR+0x8300),
+ (CFG_IMMR+0x8304));
+
+ pci_register_hose(hose);
+
+ /*
+ * Write to Command register
+ */
+ reg16 = 0xff;
+ pci_hose_read_config_word (hose, PCI_BDF(0,0,0), PCI_COMMAND,
+ &reg16);
+ reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
+ pci_hose_write_config_word(hose, PCI_BDF(0,0,0), PCI_COMMAND,
+ reg16);
+
+ /*
+ * Clear non-reserved bits in status register.
+ */
+ pci_hose_write_config_word(hose, PCI_BDF(0,0,0), PCI_STATUS,
+ 0xffff);
+ pci_hose_write_config_byte(hose, PCI_BDF(0,0,0), PCI_LATENCY_TIMER,
+ 0x80);
+
+#ifdef CONFIG_PCI_SCAN_SHOW
+ printf("PCI: Bus Dev VenId DevId Class Int\n");
+#endif
+ /*
+ * Hose scan.
+ */
+ hose->last_busno = pci_hose_scan(hose);
+}
+#endif /* CONFIG_PCI */