summaryrefslogtreecommitdiff
path: root/board/toradex
diff options
context:
space:
mode:
Diffstat (limited to 'board/toradex')
-rw-r--r--board/toradex/colibri-imx6ull/colibri-imx6ull.c225
-rw-r--r--board/toradex/colibri_vf/MAINTAINERS2
-rw-r--r--board/toradex/common/tdx-cfg-block.c89
-rw-r--r--board/toradex/common/tdx-cfg-block.h32
4 files changed, 117 insertions, 231 deletions
diff --git a/board/toradex/colibri-imx6ull/colibri-imx6ull.c b/board/toradex/colibri-imx6ull/colibri-imx6ull.c
index fcb49a0718..21addaf6ed 100644
--- a/board/toradex/colibri-imx6ull/colibri-imx6ull.c
+++ b/board/toradex/colibri-imx6ull/colibri-imx6ull.c
@@ -1,8 +1,9 @@
// SPDX-License-Identifier: GPL-2.0+
/*
- * Copyright (C) 2018 Toradex AG
+ * Copyright (C) 2018-2019 Toradex AG
*/
#include <common.h>
+
#include <asm/arch/clock.h>
#include <asm/arch/crm_regs.h>
#include <asm/arch/imx-regs.h>
@@ -14,47 +15,30 @@
#include <asm/mach-imx/boot_mode.h>
#include <asm/mach-imx/iomux-v3.h>
#include <asm/io.h>
-#include <common.h>
#include <dm.h>
#include <dm/platform_data/serial_mxc.h>
#include <fdt_support.h>
-#include <fsl_esdhc.h>
#include <imx_thermal.h>
#include <jffs2/load_kernel.h>
#include <linux/sizes.h>
-#include <mmc.h>
#include <miiphy.h>
#include <mtd_node.h>
#include <netdev.h>
-#include <usb.h>
-#include <usb/ehci-ci.h>
+
#include "../common/tdx-common.h"
+#include "../common/tdx-cfg-block.h"
DECLARE_GLOBAL_DATA_PTR;
-#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
- PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \
- PAD_CTL_SRE_FAST | PAD_CTL_HYS)
-
-#define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP | \
- PAD_CTL_SPEED_LOW | PAD_CTL_DSE_40ohm | \
- PAD_CTL_SRE_FAST | PAD_CTL_HYS)
-
-#define ENET_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
- PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
-#define ENET_PAD_CTRL_MII (PAD_CTL_DSE_40ohm)
-
-#define ENET_RX_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_DSE_48ohm)
-
#define LCD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_100K_UP | \
PAD_CTL_DSE_48ohm)
+#define MX6_PAD_SNVS_PMIC_STBY_REQ_ADDR 0x2290040
+
#define NAND_PAD_CTRL (PAD_CTL_DSE_48ohm | PAD_CTL_SRE_SLOW | PAD_CTL_HYS)
#define NAND_PAD_READY0_CTRL (PAD_CTL_DSE_48ohm | PAD_CTL_PUS_22K_UP)
-#define USB_CDET_GPIO IMX_GPIO_NR(7, 14)
-
int dram_init(void)
{
gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE);
@@ -62,56 +46,13 @@ int dram_init(void)
return 0;
}
-static iomux_v3_cfg_t const uart1_pads[] = {
- MX6_PAD_UART1_TX_DATA__UART1_DTE_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
- MX6_PAD_UART1_RX_DATA__UART1_DTE_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
- MX6_PAD_UART1_RTS_B__UART1_DTE_CTS | MUX_PAD_CTRL(UART_PAD_CTRL),
- MX6_PAD_UART1_CTS_B__UART1_DTE_RTS | MUX_PAD_CTRL(UART_PAD_CTRL),
-};
-
-#ifdef CONFIG_FSL_ESDHC
-static iomux_v3_cfg_t const usdhc1_pads[] = {
- MX6_PAD_SD1_CLK__USDHC1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD1_CMD__USDHC1_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD1_DATA0__USDHC1_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD1_DATA1__USDHC1_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD1_DATA2__USDHC1_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD1_DATA3__USDHC1_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-
- MX6_PAD_SNVS_TAMPER0__GPIO5_IO00 | MUX_PAD_CTRL(NO_PAD_CTRL),
-};
-#endif
-
-static iomux_v3_cfg_t const usb_cdet_pads[] = {
- MX6_PAD_SNVS_TAMPER2__GPIO5_IO02 | MUX_PAD_CTRL(NO_PAD_CTRL),
-};
-
#ifdef CONFIG_NAND_MXS
-static iomux_v3_cfg_t const gpmi_pads[] = {
- MX6_PAD_NAND_DATA00__RAWNAND_DATA00 | MUX_PAD_CTRL(NAND_PAD_CTRL),
- MX6_PAD_NAND_DATA01__RAWNAND_DATA01 | MUX_PAD_CTRL(NAND_PAD_CTRL),
- MX6_PAD_NAND_DATA02__RAWNAND_DATA02 | MUX_PAD_CTRL(NAND_PAD_CTRL),
- MX6_PAD_NAND_DATA03__RAWNAND_DATA03 | MUX_PAD_CTRL(NAND_PAD_CTRL),
- MX6_PAD_NAND_DATA04__RAWNAND_DATA04 | MUX_PAD_CTRL(NAND_PAD_CTRL),
- MX6_PAD_NAND_DATA05__RAWNAND_DATA05 | MUX_PAD_CTRL(NAND_PAD_CTRL),
- MX6_PAD_NAND_DATA06__RAWNAND_DATA06 | MUX_PAD_CTRL(NAND_PAD_CTRL),
- MX6_PAD_NAND_DATA07__RAWNAND_DATA07 | MUX_PAD_CTRL(NAND_PAD_CTRL),
- MX6_PAD_NAND_CLE__RAWNAND_CLE | MUX_PAD_CTRL(NAND_PAD_CTRL),
- MX6_PAD_NAND_ALE__RAWNAND_ALE | MUX_PAD_CTRL(NAND_PAD_CTRL),
- MX6_PAD_NAND_RE_B__RAWNAND_RE_B | MUX_PAD_CTRL(NAND_PAD_CTRL),
- MX6_PAD_NAND_WE_B__RAWNAND_WE_B | MUX_PAD_CTRL(NAND_PAD_CTRL),
- MX6_PAD_NAND_CE0_B__RAWNAND_CE0_B | MUX_PAD_CTRL(NAND_PAD_CTRL),
- MX6_PAD_NAND_READY_B__RAWNAND_READY_B | MUX_PAD_CTRL(NAND_PAD_READY0_CTRL),
-};
-
static void setup_gpmi_nand(void)
{
- imx_iomux_v3_setup_multiple_pads(gpmi_pads, ARRAY_SIZE(gpmi_pads));
-
setup_gpmi_io_clk((3 << MXC_CCM_CSCDR1_BCH_PODF_OFFSET) |
(3 << MXC_CCM_CSCDR1_GPMI_PODF_OFFSET));
}
-#endif
+#endif /* CONFIG_NAND_MXS */
#ifdef CONFIG_VIDEO_MXS
static iomux_v3_cfg_t const lcd_pads[] = {
@@ -168,100 +109,24 @@ static int setup_lcd(void)
#endif
#ifdef CONFIG_FEC_MXC
-static iomux_v3_cfg_t const fec2_pads[] = {
- MX6_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 | MUX_PAD_CTRL(ENET_PAD_CTRL) | MUX_MODE_SION,
- MX6_PAD_GPIO1_IO06__ENET2_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL_MII),
- MX6_PAD_GPIO1_IO07__ENET2_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL_MII),
- MX6_PAD_ENET2_RX_DATA0__ENET2_RDATA00 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL),
- MX6_PAD_ENET2_RX_DATA1__ENET2_RDATA01 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL),
- MX6_PAD_ENET2_RX_ER__ENET2_RX_ER | MUX_PAD_CTRL(ENET_RX_PAD_CTRL),
- MX6_PAD_ENET2_RX_EN__ENET2_RX_EN | MUX_PAD_CTRL(ENET_RX_PAD_CTRL),
- MX6_PAD_ENET2_TX_DATA0__ENET2_TDATA00 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_ENET2_TX_DATA1__ENET2_TDATA01 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_ENET2_TX_EN__ENET2_TX_EN | MUX_PAD_CTRL(ENET_PAD_CTRL),
-};
-
-static void setup_iomux_fec(void)
-{
- imx_iomux_v3_setup_multiple_pads(fec2_pads, ARRAY_SIZE(fec2_pads));
-}
-#endif
-
-static void setup_iomux_uart(void)
-{
- imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
-}
-
-#ifdef CONFIG_FSL_ESDHC
-
-#define USDHC1_CD_GPIO IMX_GPIO_NR(5, 0)
-
-static struct fsl_esdhc_cfg usdhc_cfg[] = {
- {USDHC1_BASE_ADDR, 0, 4},
-};
-
-int board_mmc_getcd(struct mmc *mmc)
-{
- struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
- int ret = 0;
-
- switch (cfg->esdhc_base) {
- case USDHC1_BASE_ADDR:
- ret = !gpio_get_value(USDHC1_CD_GPIO);
- break;
- }
-
- return ret;
-}
-
-int board_mmc_init(bd_t *bis)
-{
- int i, ret;
-
- /* USDHC1 is mmc0 */
- for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) {
- switch (i) {
- case 0:
- imx_iomux_v3_setup_multiple_pads(usdhc1_pads,
- ARRAY_SIZE(usdhc1_pads));
- gpio_request(USDHC1_CD_GPIO, "usdhc1_cd");
- gpio_direction_input(USDHC1_CD_GPIO);
- usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
- break;
- default:
- printf("Warning: you configured more USDHC controllers"
- "(%d) than supported by the board\n", i + 1);
- return -EINVAL;
- }
-
- ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]);
- if (ret)
- return ret;
- }
-
- return 0;
-}
-#endif
-
-#ifdef CONFIG_FEC_MXC
-
static int setup_fec(void)
{
struct iomuxc *iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR;
int ret;
- setup_iomux_fec();
-
/* provide the PHY clock from the i.MX 6 */
ret = enable_fec_anatop_clock(1, ENET_50MHZ);
if (ret)
return ret;
- /* Use 50M anatop REF_CLK and output it on the ENET2_TX_CLK */
+ /* Use 50M anatop REF_CLK and output it on ENET2_TX_CLK */
clrsetbits_le32(&iomuxc_regs->gpr[1],
IOMUX_GPR1_FEC2_CLOCK_MUX2_SEL_MASK,
IOMUX_GPR1_FEC2_CLOCK_MUX1_SEL_MASK);
+ /* give new Ethernet PHY power save mode circuitry time to settle */
+ mdelay(300);
+
return 0;
}
@@ -271,14 +136,7 @@ int board_phy_config(struct phy_device *phydev)
phydev->drv->config(phydev);
return 0;
}
-#endif
-
-int board_early_init_f(void)
-{
- setup_iomux_uart();
-
- return 0;
-}
+#endif /* CONFIG_FEC_MXC */
int board_init(void)
{
@@ -297,11 +155,6 @@ int board_init(void)
setup_lcd();
#endif
-#ifdef CONFIG_USB_EHCI_MX6
- imx_iomux_v3_setup_multiple_pads(usb_cdet_pads, ARRAY_SIZE(usb_cdet_pads));
- gpio_request(USB_CDET_GPIO, "usb-cdet-gpio");
-#endif
-
return 0;
}
@@ -317,10 +170,23 @@ static const struct boot_mode board_boot_modes[] = {
int board_late_init(void)
{
- int minc, maxc;
-
- if (get_cpu_temp_grade(&minc, &maxc) != TEMP_COMMERCIAL)
+#ifdef CONFIG_TDX_CFG_BLOCK
+ /*
+ * If we have a valid config block and it says we are a module with
+ * Wi-Fi/Bluetooth make sure we use the -wifi device tree.
+ */
+ if (tdx_hw_tag.prodid == COLIBRI_IMX6ULL_WIFI_BT_IT ||
+ tdx_hw_tag.prodid == COLIBRI_IMX6ULL_WIFI_BT)
env_set("variant", "-wifi");
+#endif
+
+ /*
+ * Disable output driver of PAD CCM_PMIC_STBY_REQ. This prevents the
+ * SOC to request for a lower voltage during sleep. This is necessary
+ * because the voltage is changing too slow for the SOC to wake up
+ * properly.
+ */
+ __raw_writel(0x8080, MX6_PAD_SNVS_PMIC_STBY_REQ_ADDR);
#ifdef CONFIG_CMD_BMODE
add_board_boot_modes(board_boot_modes);
@@ -362,41 +228,6 @@ int ft_board_setup(void *blob, bd_t *bd)
}
#endif
-#ifdef CONFIG_USB_EHCI_MX6
-static iomux_v3_cfg_t const usb_otg2_pads[] = {
- MX6_PAD_GPIO1_IO02__GPIO1_IO02 | MUX_PAD_CTRL(NO_PAD_CTRL),
-};
-
-int board_ehci_hcd_init(int port)
-{
- switch (port) {
- case 0:
- break;
- case 1:
- imx_iomux_v3_setup_multiple_pads(usb_otg2_pads,
- ARRAY_SIZE(usb_otg2_pads));
- break;
- default:
- return -EINVAL;
- }
- return 0;
-}
-
-int board_usb_phy_mode(int port)
-{
- switch (port) {
- case 0:
- if (gpio_get_value(USB_CDET_GPIO))
- return USB_INIT_DEVICE;
- else
- return USB_INIT_HOST;
- case 1:
- default:
- return USB_INIT_HOST;
- }
-}
-#endif
-
static struct mxc_serial_platdata mxc_serial_plat = {
.reg = (struct mxc_uart *)UART1_BASE,
.use_dte = 1,
diff --git a/board/toradex/colibri_vf/MAINTAINERS b/board/toradex/colibri_vf/MAINTAINERS
index 3ee2b33152..66b2150986 100644
--- a/board/toradex/colibri_vf/MAINTAINERS
+++ b/board/toradex/colibri_vf/MAINTAINERS
@@ -1,7 +1,7 @@
Colibri VFxx
M: Stefan Agner <stefan.agner@toradex.com>
W: http://developer.toradex.com/software/linux/linux-software
-W: https://www.toradex.com/community
+W: https://www.toradex.com/community
S: Maintained
F: board/toradex/colibri_vf/
F: include/configs/colibri_vf.h
diff --git a/board/toradex/common/tdx-cfg-block.c b/board/toradex/common/tdx-cfg-block.c
index b90077bedc..f69c4433b2 100644
--- a/board/toradex/common/tdx-cfg-block.c
+++ b/board/toradex/common/tdx-cfg-block.c
@@ -1,12 +1,14 @@
// SPDX-License-Identifier: GPL-2.0+
/*
- * Copyright (c) 2016 Toradex, Inc.
+ * Copyright (c) 2016-2019 Toradex, Inc.
*/
#include <common.h>
#include "tdx-cfg-block.h"
-#if defined(CONFIG_TARGET_APALIS_IMX6) || defined(CONFIG_TARGET_COLIBRI_IMX6)
+#if defined(CONFIG_TARGET_APALIS_IMX6) || \
+ defined(CONFIG_TARGET_COLIBRI_IMX6) || \
+ defined(CONFIG_TARGET_COLIBRI_IMX8QXP)
#include <asm/arch/sys_proto.h>
#else
#define is_cpu_type(cpu) (0)
@@ -92,12 +94,22 @@ const char * const toradex_modules[] = {
[34] = "Apalis TK1 2GB",
[35] = "Apalis iMX6 Dual 1GB IT",
[36] = "Colibri iMX6ULL 256MB",
- [37] = "Apalis iMX8 QuadMax 4GB Wi-Fi / Bluetooth",
- [38] = "Colibri iMX8X",
+ [37] = "Apalis iMX8 QuadMax 4GB Wi-Fi / BT IT",
+ [38] = "Colibri iMX8 QuadXPlus 2GB Wi-Fi / BT IT",
[39] = "Colibri iMX7 Dual 1GB (eMMC)",
- [40] = "Colibri iMX6ULL 512MB Wi-Fi / Bluetooth IT",
+ [40] = "Colibri iMX6ULL 512MB Wi-Fi / BT IT",
[41] = "Colibri iMX7 Dual 512MB EPDC",
[42] = "Apalis TK1 4GB",
+ [43] = "Colibri T20 512MB IT SETEK",
+ [44] = "Colibri iMX6ULL 512MB IT",
+ [45] = "Colibri iMX6ULL 512MB Wi-Fi / Bluetooth",
+ [46] = "Apalis iMX8 QuadXPlus 2GB Wi-Fi / BT IT",
+ [47] = "Apalis iMX8 QuadMax 4GB IT",
+ [48] = "Apalis iMX8 QuadPlus 2GB Wi-Fi / BT",
+ [49] = "Apalis iMX8 QuadPlus 2GB",
+ [50] = "Colibri iMX8 QuadXPlus 2GB IT",
+ [51] = "Colibri iMX8 DualX 1GB Wi-Fi / Bluetooth",
+ [52] = "Colibri iMX8 DualX 1GB",
};
#ifdef CONFIG_TDX_CFG_BLOCK_IS_IN_MMC
@@ -277,6 +289,9 @@ static int get_cfgblock_interactive(void)
char it = 'n';
int len;
+ /* Unknown module by default */
+ tdx_hw_tag.prodid = 0;
+
if (cpu_is_pxa27x())
sprintf(message, "Is the module the 312 MHz version? [y/N] ");
else
@@ -287,34 +302,56 @@ static int get_cfgblock_interactive(void)
soc = env_get("soc");
if (!strcmp("mx6", soc)) {
-#ifdef CONFIG_MACH_TYPE
- if (it == 'y' || it == 'Y')
+#ifdef CONFIG_TARGET_APALIS_IMX6
+ if (it == 'y' || it == 'Y') {
if (is_cpu_type(MXC_CPU_MX6Q))
tdx_hw_tag.prodid = APALIS_IMX6Q_IT;
else
tdx_hw_tag.prodid = APALIS_IMX6D_IT;
- else
+ } else {
if (is_cpu_type(MXC_CPU_MX6Q))
tdx_hw_tag.prodid = APALIS_IMX6Q;
else
tdx_hw_tag.prodid = APALIS_IMX6D;
-#else
- if (it == 'y' || it == 'Y')
+ }
+#elif CONFIG_TARGET_COLIBRI_IMX6
+ if (it == 'y' || it == 'Y') {
if (is_cpu_type(MXC_CPU_MX6DL))
tdx_hw_tag.prodid = COLIBRI_IMX6DL_IT;
- else
+ else if (is_cpu_type(MXC_CPU_MX6SOLO))
tdx_hw_tag.prodid = COLIBRI_IMX6S_IT;
- else
+ } else {
if (is_cpu_type(MXC_CPU_MX6DL))
tdx_hw_tag.prodid = COLIBRI_IMX6DL;
- else
+ else if (is_cpu_type(MXC_CPU_MX6SOLO))
tdx_hw_tag.prodid = COLIBRI_IMX6S;
-#endif /* CONFIG_MACH_TYPE */
- } else if (!strcmp("imx7d", soc)) {
+ }
+#elif CONFIG_TARGET_COLIBRI_IMX6ULL
+ char wb = 'n';
+
+ sprintf(message, "Does the module have Wi-Fi / Bluetooth? " \
+ "[y/N] ");
+ len = cli_readline(message);
+ wb = console_buffer[0];
+ if (it == 'y' || it == 'Y') {
+ if (wb == 'y' || wb == 'Y')
+ tdx_hw_tag.prodid = COLIBRI_IMX6ULL_WIFI_BT_IT;
+ else
+ tdx_hw_tag.prodid = COLIBRI_IMX6ULL_IT;
+ } else {
+ if (wb == 'y' || wb == 'Y')
+ tdx_hw_tag.prodid = COLIBRI_IMX6ULL_WIFI_BT;
+ else
+ tdx_hw_tag.prodid = COLIBRI_IMX6ULL;
+ }
+#endif
+ } else if (!strcmp("imx7d", soc))
tdx_hw_tag.prodid = COLIBRI_IMX7D;
- } else if (!strcmp("imx7s", soc)) {
+ else if (!strcmp("imx7s", soc))
tdx_hw_tag.prodid = COLIBRI_IMX7S;
- } else if (!strcmp("tegra20", soc)) {
+ else if (is_cpu_type(MXC_CPU_IMX8QXP))
+ tdx_hw_tag.prodid = COLIBRI_IMX8QXP_WIFI_BT_IT;
+ else if (!strcmp("tegra20", soc)) {
if (it == 'y' || it == 'Y')
if (gd->ram_size == 0x10000000)
tdx_hw_tag.prodid = COLIBRI_T20_256MB_IT;
@@ -330,8 +367,9 @@ static int get_cfgblock_interactive(void)
tdx_hw_tag.prodid = COLIBRI_PXA270_312MHZ;
else
tdx_hw_tag.prodid = COLIBRI_PXA270_520MHZ;
+ }
#ifdef CONFIG_MACH_TYPE
- } else if (!strcmp("tegra30", soc)) {
+ else if (!strcmp("tegra30", soc)) {
if (CONFIG_MACH_TYPE == MACH_TYPE_APALIS_T30) {
if (it == 'y' || it == 'Y')
tdx_hw_tag.prodid = APALIS_T30_IT;
@@ -346,8 +384,9 @@ static int get_cfgblock_interactive(void)
else
tdx_hw_tag.prodid = COLIBRI_T30;
}
+ }
#endif /* CONFIG_MACH_TYPE */
- } else if (!strcmp("tegra124", soc)) {
+ else if (!strcmp("tegra124", soc)) {
tdx_hw_tag.prodid = APALIS_TK1_2GB;
} else if (!strcmp("vf500", soc)) {
if (it == 'y' || it == 'Y')
@@ -359,7 +398,9 @@ static int get_cfgblock_interactive(void)
tdx_hw_tag.prodid = COLIBRI_VF61_IT;
else
tdx_hw_tag.prodid = COLIBRI_VF61;
- } else {
+ }
+
+ if (!tdx_hw_tag.prodid) {
printf("Module type not detectable due to unknown SoC\n");
return -1;
}
@@ -373,7 +414,7 @@ static int get_cfgblock_interactive(void)
tdx_hw_tag.ver_minor = console_buffer[2] - '0';
tdx_hw_tag.ver_assembly = console_buffer[3] - 'A';
- if (cpu_is_pxa27x() && (tdx_hw_tag.ver_major == 1))
+ if (cpu_is_pxa27x() && tdx_hw_tag.ver_major == 1)
tdx_hw_tag.prodid -= (COLIBRI_PXA270_312MHZ -
COLIBRI_PXA270_V1_312MHZ);
@@ -441,7 +482,8 @@ static int do_cfgblock_create(cmd_tbl_t *cmdtp, int flag, int argc,
* On NAND devices, recreation is only allowed if the page is
* empty (config block invalid...)
*/
- printf("NAND erase block %d need to be erased before creating a Toradex config block\n",
+ printf("NAND erase block %d need to be erased before creating" \
+ " a Toradex config block\n",
CONFIG_TDX_CFG_BLOCK_OFFSET /
get_nand_dev_by_index(0)->erasesize);
goto out;
@@ -450,7 +492,8 @@ static int do_cfgblock_create(cmd_tbl_t *cmdtp, int flag, int argc,
* On NOR devices, recreation is only allowed if the sector is
* empty and write protection is off (config block invalid...)
*/
- printf("NOR sector at offset 0x%02x need to be erased and unprotected before creating a Toradex config block\n",
+ printf("NOR sector at offset 0x%02x need to be erased and " \
+ "unprotected before creating a Toradex config block\n",
CONFIG_TDX_CFG_BLOCK_OFFSET);
goto out;
#else
diff --git a/board/toradex/common/tdx-cfg-block.h b/board/toradex/common/tdx-cfg-block.h
index da60e789a7..bfdc8b7f70 100644
--- a/board/toradex/common/tdx-cfg-block.h
+++ b/board/toradex/common/tdx-cfg-block.h
@@ -25,42 +25,54 @@ enum {
COLIBRI_PXA270_V1_520MHZ,
COLIBRI_PXA320,
COLIBRI_PXA300,
- COLIBRI_PXA310,
+ COLIBRI_PXA310, /* 5 */
COLIBRI_PXA320_IT,
COLIBRI_PXA300_XT,
COLIBRI_PXA270_312MHZ,
COLIBRI_PXA270_520MHZ,
- COLIBRI_VF50, /* not currently on sale */
- COLIBRI_VF61,
+ COLIBRI_VF50, /* 10 */
+ COLIBRI_VF61, /* not currently on sale */
COLIBRI_VF61_IT,
COLIBRI_VF50_IT,
COLIBRI_IMX6S,
- COLIBRI_IMX6DL,
+ COLIBRI_IMX6DL, /* 15 */
COLIBRI_IMX6S_IT,
COLIBRI_IMX6DL_IT,
+ /* 18 */
+ /* 19 */
COLIBRI_T20_256MB = 20,
COLIBRI_T20_512MB,
COLIBRI_T20_512MB_IT,
COLIBRI_T30,
COLIBRI_T20_256MB_IT,
- APALIS_T30_2GB,
+ APALIS_T30_2GB, /* 25 */
APALIS_T30_1GB,
APALIS_IMX6Q,
APALIS_IMX6Q_IT,
APALIS_IMX6D,
- COLIBRI_T30_IT,
+ COLIBRI_T30_IT, /* 30 */
APALIS_T30_IT,
COLIBRI_IMX7S,
COLIBRI_IMX7D,
APALIS_TK1_2GB,
- APALIS_IMX6D_IT,
+ APALIS_IMX6D_IT, /* 35 */
COLIBRI_IMX6ULL,
- APALIS_IMX8QM, /* 37 */
- COLIBRI_IMX8X,
+ APALIS_IMX8QM_WIFI_BT_IT,
+ COLIBRI_IMX8QXP_WIFI_BT_IT,
COLIBRI_IMX7D_EMMC,
COLIBRI_IMX6ULL_WIFI_BT_IT, /* 40 */
COLIBRI_IMX7D_EPDC,
- APALIS_TK1_4GB,
+ APALIS_TK1_4GB, /* not currently on sale */
+ COLIBRI_T20_512MB_IT_SETEK,
+ COLIBRI_IMX6ULL_IT,
+ COLIBRI_IMX6ULL_WIFI_BT, /* 45 */
+ APALIS_IMX8QXP_WIFI_BT_IT,
+ APALIS_IMX8QM_IT,
+ APALIS_IMX8QP_WIFI_BT,
+ APALIS_IMX8QP,
+ COLIBRI_IMX8QXP_IT, /* 50 */
+ COLIBRI_IMX8DX_WIFI_BT,
+ COLIBRI_IMX8DX,
};
extern const char * const toradex_modules[];
generated by cgit v1.2.3 (git 2.0.4) at 2024-07-06 14:50:04 +0000