1 files changed, 68 insertions, 0 deletions
diff --git a/board/timll/devkit3250/devkit3250_spl.c b/board/timll/devkit3250/devkit3250_spl.c
new file mode 100644
index 0000000000..bf5269816f
--- /dev/null
+++ b/board/timll/devkit3250/devkit3250_spl.c
@@ -0,0 +1,68 @@
+/*
+ * Timll DevKit3250 board support, SPL board configuration
+ *
+ * (C) Copyright 2015 Vladimir Zapolskiy <vz@mleia.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/emc.h>
+#include <asm/arch-lpc32xx/gpio.h>
+#include <spl.h>
+
+static struct gpio_regs *gpio = (struct gpio_regs *)GPIO_BASE;
+
+/*
+ * SDRAM K4S561632N-LC60 settings are selected in assumption that
+ * SDRAM clock may be set up to 166 MHz, however at the moment
+ * it is 104 MHz. Most delay values are converted to be a multiple of
+ * base clock, and precise pinned values are not needed here.
+ */
+struct emc_dram_settings dram_64mb = {
+	.cmddelay	= 0x0001C000,
+	.config0	= 0x00005682,
+	.rascas0	= 0x00000302,
+	.rdconfig	= 0x00000011,	/* undocumented but crucial value */
+
+	.trp	= 83333333,
+	.tras	= 23809524,
+	.tsrex	= 12500000,
+	.twr	= 83000000,		/* tWR = tRDL = 2 CLK */
+	.trc	= 15384616,
+	.trfc	= 15384616,
+	.txsr	= 12500000,
+	.trrd	= 1,
+	.tmrd	= 1,
+	.tcdlr	= 0,
+
+	.refresh	= 130000,	/* 800 clock cycles */
+
+	.mode	= 0x00018000,
+	.emode	= 0x02000000,
+};
+
+void spl_board_init(void)
+{
+	/* First of all silence buzzer controlled by GPO_20 */
+	writel((1 << 20), &gpio->p3_outp_clr);
+
+	lpc32xx_uart_init(CONFIG_SYS_LPC32XX_UART);
+	preloader_console_init();
+
+	ddr_init(&dram_64mb);
+
+	/*
+	 * NAND initialization is done by nand_init(),
+	 * here just enable NAND SLC clocks
+	 */
+	lpc32xx_slc_nand_init();
+}
+
+u32 spl_boot_device(void)
+{
+	return BOOT_DEVICE_NAND;
+}