diff options
Diffstat (limited to 'board/ti')
-rw-r--r-- | board/ti/beagle/beagle.c | 53 | ||||
-rw-r--r-- | board/ti/evm/evm.c | 19 |
2 files changed, 35 insertions, 37 deletions
diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c index 6175e1d1ac0..4adf9827c5f 100644 --- a/board/ti/beagle/beagle.c +++ b/board/ti/beagle/beagle.c @@ -139,8 +139,7 @@ static int get_board_revision(void) * Description: If we use SPL then there is no x-loader nor config header * so we have to setup the DDR timings ourself on both banks. */ -void get_board_mem_timings(u32 *mcfg, u32 *ctrla, u32 *ctrlb, u32 *rfr_ctrl, - u32 *mr) +void get_board_mem_timings(struct board_sdrc_timings *timings) { int pop_mfr, pop_id; @@ -151,29 +150,29 @@ void get_board_mem_timings(u32 *mcfg, u32 *ctrla, u32 *ctrlb, u32 *rfr_ctrl, */ identify_nand_chip(&pop_mfr, &pop_id); - *mr = MICRON_V_MR_165; + timings->mr = MICRON_V_MR_165; switch (get_board_revision()) { case REVISION_C4: if (pop_mfr == NAND_MFR_STMICRO && pop_id == 0xba) { /* 512MB DDR */ - *mcfg = NUMONYX_V_MCFG_165(512 << 20); - *ctrla = NUMONYX_V_ACTIMA_165; - *ctrlb = NUMONYX_V_ACTIMB_165; - *rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz; + timings->mcfg = NUMONYX_V_MCFG_165(512 << 20); + timings->ctrla = NUMONYX_V_ACTIMA_165; + timings->ctrlb = NUMONYX_V_ACTIMB_165; + timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz; break; } else if (pop_mfr == NAND_MFR_MICRON && pop_id == 0xba) { /* Beagleboard Rev C4, 512MB Nand/256MB DDR*/ - *mcfg = MICRON_V_MCFG_165(128 << 20); - *ctrla = MICRON_V_ACTIMA_165; - *ctrlb = MICRON_V_ACTIMB_165; - *rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz; + timings->mcfg = MICRON_V_MCFG_165(128 << 20); + timings->ctrla = MICRON_V_ACTIMA_165; + timings->ctrlb = MICRON_V_ACTIMB_165; + timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz; break; } else if (pop_mfr == NAND_MFR_MICRON && pop_id == 0xbc) { /* Beagleboard Rev C5, 256MB DDR */ - *mcfg = MICRON_V_MCFG_200(256 << 20); - *ctrla = MICRON_V_ACTIMA_200; - *ctrlb = MICRON_V_ACTIMB_200; - *rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz; + timings->mcfg = MICRON_V_MCFG_200(256 << 20); + timings->ctrla = MICRON_V_ACTIMA_200; + timings->ctrlb = MICRON_V_ACTIMB_200; + timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz; break; } case REVISION_XM_A: @@ -181,24 +180,24 @@ void get_board_mem_timings(u32 *mcfg, u32 *ctrla, u32 *ctrlb, u32 *rfr_ctrl, case REVISION_XM_C: if (pop_mfr == 0) { /* 256MB DDR */ - *mcfg = MICRON_V_MCFG_200(256 << 20); - *ctrla = MICRON_V_ACTIMA_200; - *ctrlb = MICRON_V_ACTIMB_200; - *rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz; + timings->mcfg = MICRON_V_MCFG_200(256 << 20); + timings->ctrla = MICRON_V_ACTIMA_200; + timings->ctrlb = MICRON_V_ACTIMB_200; + timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz; } else { /* 512MB DDR */ - *mcfg = NUMONYX_V_MCFG_165(512 << 20); - *ctrla = NUMONYX_V_ACTIMA_165; - *ctrlb = NUMONYX_V_ACTIMB_165; - *rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz; + timings->mcfg = NUMONYX_V_MCFG_165(512 << 20); + timings->ctrla = NUMONYX_V_ACTIMA_165; + timings->ctrlb = NUMONYX_V_ACTIMB_165; + timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz; } break; default: /* Assume 128MB and Micron/165MHz timings to be safe */ - *mcfg = MICRON_V_MCFG_165(128 << 20); - *ctrla = MICRON_V_ACTIMA_165; - *ctrlb = MICRON_V_ACTIMB_165; - *rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz; + timings->mcfg = MICRON_V_MCFG_165(128 << 20); + timings->ctrla = MICRON_V_ACTIMA_165; + timings->ctrlb = MICRON_V_ACTIMB_165; + timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz; } } #endif diff --git a/board/ti/evm/evm.c b/board/ti/evm/evm.c index 61fc7b55310..8a3aa0c5bfd 100644 --- a/board/ti/evm/evm.c +++ b/board/ti/evm/evm.c @@ -128,8 +128,7 @@ int board_init(void) * provides the timing values back to the function that configures * the memory. */ -void get_board_mem_timings(u32 *mcfg, u32 *ctrla, u32 *ctrlb, u32 *rfr_ctrl, - u32 *mr) +void get_board_mem_timings(struct board_sdrc_timings *timings) { int pop_mfr, pop_id; @@ -142,17 +141,17 @@ void get_board_mem_timings(u32 *mcfg, u32 *ctrla, u32 *ctrlb, u32 *rfr_ctrl, if (pop_mfr == NAND_MFR_HYNIX && pop_id == 0xbc) { /* 256MB DDR */ - *mcfg = HYNIX_V_MCFG_200(256 << 20); - *ctrla = HYNIX_V_ACTIMA_200; - *ctrlb = HYNIX_V_ACTIMB_200; + timings->mcfg = HYNIX_V_MCFG_200(256 << 20); + timings->ctrla = HYNIX_V_ACTIMA_200; + timings->ctrlb = HYNIX_V_ACTIMB_200; } else { /* 128MB DDR */ - *mcfg = MICRON_V_MCFG_165(128 << 20); - *ctrla = MICRON_V_ACTIMA_165; - *ctrlb = MICRON_V_ACTIMB_165; + timings->mcfg = MICRON_V_MCFG_165(128 << 20); + timings->ctrla = MICRON_V_ACTIMA_165; + timings->ctrlb = MICRON_V_ACTIMB_165; } - *rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz; - *mr = MICRON_V_MR_165; + timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz; + timings->mr = MICRON_V_MR_165; } #endif |