diff options
Diffstat (limited to 'board/sixnet')
-rw-r--r-- | board/sixnet/flash.c | 30 | ||||
-rw-r--r-- | board/sixnet/sixnet.c | 22 |
2 files changed, 26 insertions, 26 deletions
diff --git a/board/sixnet/flash.c b/board/sixnet/flash.c index 3f2329966ab..a8dfca82461 100644 --- a/board/sixnet/flash.c +++ b/board/sixnet/flash.c @@ -28,7 +28,7 @@ */ #include <environment.h> -flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ +flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ /* NOTE - CONFIG_FLASH_16BIT means the CPU interface is 16-bit, it * has nothing to do with the flash chip being 8-bit or 16-bit. @@ -56,7 +56,7 @@ static void flash_reset(flash_info_t *info); static int write_word_intel(flash_info_t *info, FPWV *dest, FPW data); static int write_word_amd(flash_info_t *info, FPWV *dest, FPW data); static void flash_get_offsets(ulong base, flash_info_t *info); -#ifdef CFG_FLASH_PROTECTION +#ifdef CONFIG_SYS_FLASH_PROTECTION static void flash_sync_real_protect(flash_info_t *info); #endif @@ -67,17 +67,17 @@ static void flash_sync_real_protect(flash_info_t *info); */ unsigned long flash_init (void) { - volatile immap_t *immap = (immap_t *)CFG_IMMR; + volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; volatile memctl8xx_t *memctl = &immap->im_memctl; unsigned long size_b; int i; /* Init: no FLASHes known */ - for (i=0; i < CFG_MAX_FLASH_BANKS; ++i) { + for (i=0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) { flash_info[i].flash_id = FLASH_UNKNOWN; } - size_b = flash_get_size((FPW *)CFG_FLASH_BASE, &flash_info[0]); + size_b = flash_get_size((FPW *)CONFIG_SYS_FLASH_BASE, &flash_info[0]); flash_info[0].size = size_b; @@ -91,20 +91,20 @@ unsigned long flash_init (void) /* Do this again (was done already in flast_get_size), just * in case we move it when remap the FLASH. */ - flash_get_offsets (CFG_FLASH_BASE, &flash_info[0]); + flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]); -#ifdef CFG_FLASH_PROTECTION +#ifdef CONFIG_SYS_FLASH_PROTECTION /* read the hardware protection status (if any) into the * protection array in flash_info. */ flash_sync_real_protect(&flash_info[0]); #endif -#if CFG_MONITOR_BASE >= CFG_FLASH_BASE +#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE /* monitor protection ON by default */ flash_protect(FLAG_PROTECT_SET, - CFG_MONITOR_BASE, - CFG_MONITOR_BASE+monitor_flash_len-1, + CONFIG_SYS_MONITOR_BASE, + CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1, &flash_info[0]); #endif @@ -405,7 +405,7 @@ ulong flash_get_size (FPWV *addr, flash_info_t *info) return (info->size); } -#ifdef CFG_FLASH_PROTECTION +#ifdef CONFIG_SYS_FLASH_PROTECTION /*----------------------------------------------------------------------- */ @@ -544,7 +544,7 @@ int flash_erase (flash_info_t *info, int s_first, int s_last) udelay (1000); while ((*addr & (FPW)0x00800080) != (FPW)0x00800080) { - if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) { + if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { printf ("Timeout\n"); if (intel) { @@ -663,7 +663,7 @@ static int write_word_amd (flash_info_t *info, FPWV *dest, FPW data) /* data polling for D7 */ while (res == 0 && (*dest & (FPW)0x00800080) != (data & (FPW)0x00800080)) { - if (get_timer(start) > CFG_FLASH_WRITE_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { *dest = (FPW)0x00F000F0; /* reset bank */ res = 1; } @@ -709,7 +709,7 @@ static int write_word_intel (flash_info_t *info, FPWV *dest, FPW data) start = get_timer (0); while (res == 0 && (*dest & (FPW)0x00800080) != (FPW)0x00800080) { - if (get_timer(start) > CFG_FLASH_WRITE_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { *dest = (FPW)0x00B000B0; /* Suspend program */ res = 1; } @@ -724,7 +724,7 @@ static int write_word_intel (flash_info_t *info, FPWV *dest, FPW data) return (res); } -#ifdef CFG_FLASH_PROTECTION +#ifdef CONFIG_SYS_FLASH_PROTECTION /*----------------------------------------------------------------------- */ int flash_real_protect (flash_info_t * info, long sector, int prot) diff --git a/board/sixnet/sixnet.c b/board/sixnet/sixnet.c index dcd34726b00..3ed581ec09e 100644 --- a/board/sixnet/sixnet.c +++ b/board/sixnet/sixnet.c @@ -35,7 +35,7 @@ #if defined(CONFIG_CMD_NAND) #include <linux/mtd/nand_legacy.h> -extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE]; +extern struct nand_chip nand_dev_desc[CONFIG_SYS_MAX_NAND_DEVICE]; #endif DECLARE_GLOBAL_DATA_PTR; @@ -133,7 +133,7 @@ const uint duart_table[] = #define FPGA_DONE 0x0080 /* PA8, input, high when FPGA load complete */ #define FPGA_PROGRAM_L 0x0040 /* PA9, output, low to reset, high to start */ #define FPGA_INIT_L 0x0020 /* PA10, input, low indicates not ready */ -#define fpga (*(volatile unsigned char *)(CFG_FPGA_PROG)) /* FPGA port */ +#define fpga (*(volatile unsigned char *)(CONFIG_SYS_FPGA_PROG)) /* FPGA port */ int board_postclk_init (void) { @@ -143,7 +143,7 @@ int board_postclk_init (void) # include "fpgadata.c" }; - volatile immap_t *immap = (immap_t *)CFG_IMMR; + volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; volatile memctl8xx_t *memctl = &immap->im_memctl; #define porta (immap->im_ioport.iop_padat) const unsigned char* pdata; @@ -247,10 +247,10 @@ int board_postclk_init (void) /* ------------------------------------------------------------------------- */ /* base address for SRAM, assume 32-bit port, valid */ -#define NVRAM_BR_VALUE (CFG_SRAM_BASE | BR_PS_32 | BR_V) +#define NVRAM_BR_VALUE (CONFIG_SYS_SRAM_BASE | BR_PS_32 | BR_V) /* up to 64MB - will be adjusted for actual size */ -#define NVRAM_OR_PRELIM (ORMASK(CFG_SRAM_SIZE) \ +#define NVRAM_OR_PRELIM (ORMASK(CONFIG_SYS_SRAM_SIZE) \ | OR_CSNT_SAM | OR_ACS_DIV4 | OR_BI | OR_SCY_5_CLK | OR_EHTR) /* * Miscellaneous platform dependent initializations after running in RAM. @@ -258,7 +258,7 @@ int board_postclk_init (void) int misc_init_r (void) { - volatile immap_t *immap = (immap_t *)CFG_IMMR; + volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; volatile memctl8xx_t *memctl = &immap->im_memctl; char* s; char* e; @@ -271,7 +271,7 @@ int misc_init_r (void) /* Is there any SRAM? Is it 16 or 32 bits wide? */ /* First look for 32-bit SRAM */ - bd->bi_sramsize = ram_size((ulong*)CFG_SRAM_BASE, CFG_SRAM_SIZE); + bd->bi_sramsize = ram_size((ulong*)CONFIG_SYS_SRAM_BASE, CONFIG_SYS_SRAM_SIZE); if (bd->bi_sramsize == 0) { /* no 32-bit SRAM, but there could be 16-bit SRAM since @@ -279,7 +279,7 @@ int misc_init_r (void) * Try again with a 16-bit bus. */ memctl->memc_br2 |= BR_PS_16; - bd->bi_sramsize = ram_size((ulong*)CFG_SRAM_BASE, CFG_SRAM_SIZE); + bd->bi_sramsize = ram_size((ulong*)CONFIG_SYS_SRAM_BASE, CONFIG_SYS_SRAM_SIZE); } if (bd->bi_sramsize == 0) { @@ -288,7 +288,7 @@ int misc_init_r (void) else { /* adjust or2 for actual size of SRAM */ memctl->memc_or2 |= ORMASK(bd->bi_sramsize); - bd->bi_sramstart = CFG_SRAM_BASE; + bd->bi_sramstart = CONFIG_SYS_SRAM_BASE; printf("SRAM: %lu KB\n", bd->bi_sramsize >> 10); } @@ -330,7 +330,7 @@ int misc_init_r (void) #if defined(CONFIG_CMD_NAND) void nand_init(void) { - unsigned long totlen = nand_probe(CFG_DFLASH_BASE); + unsigned long totlen = nand_probe(CONFIG_SYS_DFLASH_BASE); printf ("%4lu MB\n", totlen >> 20); } @@ -498,7 +498,7 @@ const uint sdram_table[] = phys_size_t initdram(int board_type) { - volatile immap_t *immap = (immap_t *)CFG_IMMR; + volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; volatile memctl8xx_t *memctl = &immap->im_memctl; uint size_sdram = 0; uint size_sdram9 = 0; |