summaryrefslogtreecommitdiff
path: root/board/sbc8349
diff options
context:
space:
mode:
Diffstat (limited to 'board/sbc8349')
-rw-r--r--board/sbc8349/Makefile49
-rw-r--r--board/sbc8349/config.mk27
-rw-r--r--board/sbc8349/pci.c348
-rw-r--r--board/sbc8349/sbc8349.c585
-rw-r--r--board/sbc8349/u-boot.lds125
5 files changed, 1134 insertions, 0 deletions
diff --git a/board/sbc8349/Makefile b/board/sbc8349/Makefile
new file mode 100644
index 0000000000..02cf569b5b
--- /dev/null
+++ b/board/sbc8349/Makefile
@@ -0,0 +1,49 @@
+#
+# Copyright (c) 2006 Wind River Systems, Inc.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS := $(BOARD).o pci.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/sbc8349/config.mk b/board/sbc8349/config.mk
new file mode 100644
index 0000000000..05fa5a07d5
--- /dev/null
+++ b/board/sbc8349/config.mk
@@ -0,0 +1,27 @@
+#
+# Copyright (c) 2006 Wind River Systems, Inc.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# SBC8349E
+#
+
+TEXT_BASE = 0xFFF00000
diff --git a/board/sbc8349/pci.c b/board/sbc8349/pci.c
new file mode 100644
index 0000000000..eadf230983
--- /dev/null
+++ b/board/sbc8349/pci.c
@@ -0,0 +1,348 @@
+/*
+ * pci.c -- WindRiver SBC8349 PCI board support.
+ * Copyright (c) 2006 Wind River Systems, Inc.
+ *
+ * Based on MPC8349 PCI support but w/o PIB related code.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <asm/mmu.h>
+#include <common.h>
+#include <asm/global_data.h>
+#include <pci.h>
+#include <asm/mpc8349_pci.h>
+#include <i2c.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifdef CONFIG_PCI
+
+/* System RAM mapped to PCI space */
+#define CONFIG_PCI_SYS_MEM_BUS CFG_SDRAM_BASE
+#define CONFIG_PCI_SYS_MEM_PHYS CFG_SDRAM_BASE
+
+#ifndef CONFIG_PCI_PNP
+static struct pci_config_table pci_mpc8349emds_config_table[] = {
+ {PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
+ PCI_IDSEL_NUMBER, PCI_ANY_ID,
+ pci_cfgfunc_config_device, {PCI_ENET0_IOADDR,
+ PCI_ENET0_MEMADDR,
+ PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER
+ }
+ },
+ {}
+};
+#endif
+
+static struct pci_controller pci_hose[] = {
+ {
+#ifndef CONFIG_PCI_PNP
+ config_table:pci_mpc8349emds_config_table,
+#endif
+ },
+ {
+#ifndef CONFIG_PCI_PNP
+ config_table:pci_mpc8349emds_config_table,
+#endif
+ }
+};
+
+/**************************************************************************
+ * pci_init_board()
+ *
+ * NOTICE: PCI2 is not supported. There is only one
+ * physical PCI slot on the board.
+ *
+ */
+void
+pci_init_board(void)
+{
+ volatile immap_t * immr;
+ volatile clk83xx_t * clk;
+ volatile law83xx_t * pci_law;
+ volatile pot83xx_t * pci_pot;
+ volatile pcictrl83xx_t * pci_ctrl;
+ volatile pciconf83xx_t * pci_conf;
+ u16 reg16;
+ u32 reg32;
+ u32 dev;
+ struct pci_controller * hose;
+
+ immr = (immap_t *)CFG_IMMR;
+ clk = (clk83xx_t *)&immr->clk;
+ pci_law = immr->sysconf.pcilaw;
+ pci_pot = immr->ios.pot;
+ pci_ctrl = immr->pci_ctrl;
+ pci_conf = immr->pci_conf;
+
+ hose = &pci_hose[0];
+
+ /*
+ * Configure PCI controller and PCI_CLK_OUTPUT both in 66M mode
+ */
+
+ reg32 = clk->occr;
+ udelay(2000);
+ clk->occr = 0xff000000;
+ udelay(2000);
+
+ /*
+ * Release PCI RST Output signal
+ */
+ pci_ctrl[0].gcr = 0;
+ udelay(2000);
+ pci_ctrl[0].gcr = 1;
+
+#ifdef CONFIG_MPC83XX_PCI2
+ pci_ctrl[1].gcr = 0;
+ udelay(2000);
+ pci_ctrl[1].gcr = 1;
+#endif
+
+ /* We need to wait at least a 1sec based on PCI specs */
+ {
+ int i;
+
+ for (i = 0; i < 1000; ++i)
+ udelay (1000);
+ }
+
+ /*
+ * Configure PCI Local Access Windows
+ */
+ pci_law[0].bar = CFG_PCI1_MEM_PHYS & LAWBAR_BAR;
+ pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_1G;
+
+ pci_law[1].bar = CFG_PCI1_IO_PHYS & LAWBAR_BAR;
+ pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_4M;
+
+ /*
+ * Configure PCI Outbound Translation Windows
+ */
+
+ /* PCI1 mem space - prefetch */
+ pci_pot[0].potar = (CFG_PCI1_MEM_BASE >> 12) & POTAR_TA_MASK;
+ pci_pot[0].pobar = (CFG_PCI1_MEM_PHYS >> 12) & POBAR_BA_MASK;
+ pci_pot[0].pocmr = POCMR_EN | POCMR_PREFETCH_EN | (POCMR_CM_256M & POCMR_CM_MASK);
+
+ /* PCI1 IO space */
+ pci_pot[1].potar = (CFG_PCI1_IO_BASE >> 12) & POTAR_TA_MASK;
+ pci_pot[1].pobar = (CFG_PCI1_IO_PHYS >> 12) & POBAR_BA_MASK;
+ pci_pot[1].pocmr = POCMR_EN | POCMR_IO | (POCMR_CM_1M & POCMR_CM_MASK);
+
+ /* PCI1 mmio - non-prefetch mem space */
+ pci_pot[2].potar = (CFG_PCI1_MMIO_BASE >> 12) & POTAR_TA_MASK;
+ pci_pot[2].pobar = (CFG_PCI1_MMIO_PHYS >> 12) & POBAR_BA_MASK;
+ pci_pot[2].pocmr = POCMR_EN | (POCMR_CM_256M & POCMR_CM_MASK);
+
+ /*
+ * Configure PCI Inbound Translation Windows
+ */
+
+ /* we need RAM mapped to PCI space for the devices to
+ * access main memory */
+ pci_ctrl[0].pitar1 = 0x0;
+ pci_ctrl[0].pibar1 = 0x0;
+ pci_ctrl[0].piebar1 = 0x0;
+ pci_ctrl[0].piwar1 = PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP | (__ilog2(gd->ram_size) - 1);
+
+ hose->first_busno = 0;
+ hose->last_busno = 0xff;
+
+ /* PCI memory prefetch space */
+ pci_set_region(hose->regions + 0,
+ CFG_PCI1_MEM_BASE,
+ CFG_PCI1_MEM_PHYS,
+ CFG_PCI1_MEM_SIZE,
+ PCI_REGION_MEM|PCI_REGION_PREFETCH);
+
+ /* PCI memory space */
+ pci_set_region(hose->regions + 1,
+ CFG_PCI1_MMIO_BASE,
+ CFG_PCI1_MMIO_PHYS,
+ CFG_PCI1_MMIO_SIZE,
+ PCI_REGION_MEM);
+
+ /* PCI IO space */
+ pci_set_region(hose->regions + 2,
+ CFG_PCI1_IO_BASE,
+ CFG_PCI1_IO_PHYS,
+ CFG_PCI1_IO_SIZE,
+ PCI_REGION_IO);
+
+ /* System memory space */
+ pci_set_region(hose->regions + 3,
+ CONFIG_PCI_SYS_MEM_BUS,
+ CONFIG_PCI_SYS_MEM_PHYS,
+ gd->ram_size,
+ PCI_REGION_MEM | PCI_REGION_MEMORY);
+
+ hose->region_count = 4;
+
+ pci_setup_indirect(hose,
+ (CFG_IMMR+0x8300),
+ (CFG_IMMR+0x8304));
+
+ pci_register_hose(hose);
+
+ /*
+ * Write to Command register
+ */
+ reg16 = 0xff;
+ dev = PCI_BDF(hose->first_busno, 0, 0);
+ pci_hose_read_config_word (hose, dev, PCI_COMMAND, &reg16);
+ reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
+ pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16);
+
+ /*
+ * Clear non-reserved bits in status register.
+ */
+ pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff);
+ pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80);
+ pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08);
+
+#ifdef CONFIG_PCI_SCAN_SHOW
+ printf("PCI: Bus Dev VenId DevId Class Int\n");
+#endif
+ /*
+ * Hose scan.
+ */
+ hose->last_busno = pci_hose_scan(hose);
+
+#ifdef CONFIG_MPC83XX_PCI2
+ hose = &pci_hose[1];
+
+ /*
+ * Configure PCI Outbound Translation Windows
+ */
+
+ /* PCI2 mem space - prefetch */
+ pci_pot[3].potar = (CFG_PCI2_MEM_BASE >> 12) & POTAR_TA_MASK;
+ pci_pot[3].pobar = (CFG_PCI2_MEM_PHYS >> 12) & POBAR_BA_MASK;
+ pci_pot[3].pocmr = POCMR_EN | POCMR_PCI2 | POCMR_PREFETCH_EN | (POCMR_CM_256M & POCMR_CM_MASK);
+
+ /* PCI2 IO space */
+ pci_pot[4].potar = (CFG_PCI2_IO_BASE >> 12) & POTAR_TA_MASK;
+ pci_pot[4].pobar = (CFG_PCI2_IO_PHYS >> 12) & POBAR_BA_MASK;
+ pci_pot[4].pocmr = POCMR_EN | POCMR_PCI2 | POCMR_IO | (POCMR_CM_1M & POCMR_CM_MASK);
+
+ /* PCI2 mmio - non-prefetch mem space */
+ pci_pot[5].potar = (CFG_PCI2_MMIO_BASE >> 12) & POTAR_TA_MASK;
+ pci_pot[5].pobar = (CFG_PCI2_MMIO_PHYS >> 12) & POBAR_BA_MASK;
+ pci_pot[5].pocmr = POCMR_EN | POCMR_PCI2 | (POCMR_CM_256M & POCMR_CM_MASK);
+
+ /*
+ * Configure PCI Inbound Translation Windows
+ */
+
+ /* we need RAM mapped to PCI space for the devices to
+ * access main memory */
+ pci_ctrl[1].pitar1 = 0x0;
+ pci_ctrl[1].pibar1 = 0x0;
+ pci_ctrl[1].piebar1 = 0x0;
+ pci_ctrl[1].piwar1 = PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP | (__ilog2(gd->ram_size) - 1);
+
+ hose->first_busno = pci_hose[0].last_busno + 1;
+ hose->last_busno = 0xff;
+
+ /* PCI memory prefetch space */
+ pci_set_region(hose->regions + 0,
+ CFG_PCI2_MEM_BASE,
+ CFG_PCI2_MEM_PHYS,
+ CFG_PCI2_MEM_SIZE,
+ PCI_REGION_MEM|PCI_REGION_PREFETCH);
+
+ /* PCI memory space */
+ pci_set_region(hose->regions + 1,
+ CFG_PCI2_MMIO_BASE,
+ CFG_PCI2_MMIO_PHYS,
+ CFG_PCI2_MMIO_SIZE,
+ PCI_REGION_MEM);
+
+ /* PCI IO space */
+ pci_set_region(hose->regions + 2,
+ CFG_PCI2_IO_BASE,
+ CFG_PCI2_IO_PHYS,
+ CFG_PCI2_IO_SIZE,
+ PCI_REGION_IO);
+
+ /* System memory space */
+ pci_set_region(hose->regions + 3,
+ CONFIG_PCI_SYS_MEM_BUS,
+ CONFIG_PCI_SYS_MEM_PHYS,
+ gd->ram_size,
+ PCI_REGION_MEM | PCI_REGION_MEMORY);
+
+ hose->region_count = 4;
+
+ pci_setup_indirect(hose,
+ (CFG_IMMR+0x8380),
+ (CFG_IMMR+0x8384));
+
+ pci_register_hose(hose);
+
+ /*
+ * Write to Command register
+ */
+ reg16 = 0xff;
+ dev = PCI_BDF(hose->first_busno, 0, 0);
+ pci_hose_read_config_word (hose, dev, PCI_COMMAND, &reg16);
+ reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
+ pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16);
+
+ /*
+ * Clear non-reserved bits in status register.
+ */
+ pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff);
+ pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80);
+ pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08);
+
+ /*
+ * Hose scan.
+ */
+ hose->last_busno = pci_hose_scan(hose);
+#endif
+
+}
+
+#ifdef CONFIG_OF_FLAT_TREE
+void
+ft_pci_setup(void *blob, bd_t *bd)
+{
+ u32 *p;
+ int len;
+
+ p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8500/bus-range", &len);
+ if (p != NULL) {
+ p[0] = pci_hose[0].first_busno;
+ p[1] = pci_hose[0].last_busno;
+ }
+
+#ifdef CONFIG_MPC83XX_PCI2
+ p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8600/bus-range", &len);
+ if (p != NULL) {
+ p[0] = pci_hose[1].first_busno;
+ p[1] = pci_hose[1].last_busno;
+ }
+#endif
+}
+#endif /* CONFIG_OF_FLAT_TREE */
+#endif /* CONFIG_PCI */
diff --git a/board/sbc8349/sbc8349.c b/board/sbc8349/sbc8349.c
new file mode 100644
index 0000000000..4cd447e097
--- /dev/null
+++ b/board/sbc8349/sbc8349.c
@@ -0,0 +1,585 @@
+/*
+ * sbc8349.c -- WindRiver SBC8349 board support.
+ * Copyright (c) 2006-2007 Wind River Systems, Inc.
+ *
+ * Paul Gortmaker <paul.gortmaker@windriver.com>
+ * Based on board/mpc8349emds/mpc8349emds.c (and previous 834x releases.)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <ioports.h>
+#include <mpc83xx.h>
+#include <asm/mpc8349_pci.h>
+#include <i2c.h>
+#include <spd.h>
+#include <miiphy.h>
+#include <command.h>
+#if defined(CONFIG_SPD_EEPROM)
+#include <spd_sdram.h>
+#endif
+#if defined(CONFIG_OF_FLAT_TREE)
+#include <ft_build.h>
+#endif
+
+int fixed_sdram(void);
+void sdram_init(void);
+
+#if defined(CONFIG_DDR_ECC) && defined(CONFIG_MPC83XX)
+void ddr_enable_ecc(unsigned int dram_size);
+#endif
+
+#ifdef CONFIG_BOARD_EARLY_INIT_F
+int board_early_init_f (void)
+{
+ return 0;
+}
+#endif
+
+#define ns2clk(ns) (ns / (1000000000 / CONFIG_8349_CLKIN) + 1)
+
+long int initdram (int board_type)
+{
+ volatile immap_t *im = (immap_t *)CFG_IMMR;
+ u32 msize = 0;
+
+ if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im)
+ return -1;
+
+ puts("Initializing\n");
+
+ /* DDR SDRAM - Main SODIMM */
+ im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR;
+#if defined(CONFIG_SPD_EEPROM)
+ msize = spd_sdram();
+#else
+ msize = fixed_sdram();
+#endif
+ /*
+ * Initialize SDRAM if it is on local bus.
+ */
+ sdram_init();
+
+#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
+ /*
+ * Initialize and enable DDR ECC.
+ */
+ ddr_enable_ecc(msize * 1024 * 1024);
+#endif
+ puts(" DDR RAM: ");
+ /* return total bus SDRAM size(bytes) -- DDR */
+ return (msize * 1024 * 1024);
+}
+
+#if !defined(CONFIG_SPD_EEPROM)
+/*************************************************************************
+ * fixed sdram init -- doesn't use serial presence detect.
+ ************************************************************************/
+int fixed_sdram(void)
+{
+ volatile immap_t *im = (immap_t *)CFG_IMMR;
+ u32 msize = 0;
+ u32 ddr_size;
+ u32 ddr_size_log2;
+
+ msize = CFG_DDR_SIZE;
+ for (ddr_size = msize << 20, ddr_size_log2 = 0;
+ (ddr_size > 1);
+ ddr_size = ddr_size>>1, ddr_size_log2++) {
+ if (ddr_size & 1) {
+ return -1;
+ }
+ }
+ im->sysconf.ddrlaw[0].bar = ((CFG_DDR_SDRAM_BASE>>12) & 0xfffff);
+ im->sysconf.ddrlaw[0].ar = LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE);
+
+#if (CFG_DDR_SIZE != 256)
+#warning Currently any ddr size other than 256 is not supported
+#endif
+ im->ddr.csbnds[2].csbnds = 0x0000000f;
+ im->ddr.cs_config[2] = CFG_DDR_CONFIG;
+
+ /* currently we use only one CS, so disable the other banks */
+ im->ddr.cs_config[0] = 0;
+ im->ddr.cs_config[1] = 0;
+ im->ddr.cs_config[3] = 0;
+
+ im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1;
+ im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2;
+
+ im->ddr.sdram_cfg =
+ SDRAM_CFG_SREN
+#if defined(CONFIG_DDR_2T_TIMING)
+ | SDRAM_CFG_2T_EN
+#endif
+ | 2 << SDRAM_CFG_SDRAM_TYPE_SHIFT;
+#if defined (CONFIG_DDR_32BIT)
+ /* for 32-bit mode burst length is 8 */
+ im->ddr.sdram_cfg |= (SDRAM_CFG_32_BE | SDRAM_CFG_8_BE);
+#endif
+ im->ddr.sdram_mode = CFG_DDR_MODE;
+
+ im->ddr.sdram_interval = CFG_DDR_INTERVAL;
+ udelay(200);
+
+ /* enable DDR controller */
+ im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN;
+ return msize;
+}
+#endif/*!CFG_SPD_EEPROM*/
+
+
+int checkboard (void)
+{
+ puts("Board: Wind River SBC834x\n");
+ return 0;
+}
+
+/*
+ * if board is fitted with SDRAM
+ */
+#if defined(CFG_BR2_PRELIM) \
+ && defined(CFG_OR2_PRELIM) \
+ && defined(CFG_LBLAWBAR2_PRELIM) \
+ && defined(CFG_LBLAWAR2_PRELIM)
+/*
+ * Initialize SDRAM memory on the Local Bus.
+ */
+
+void sdram_init(void)
+{
+ volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile lbus83xx_t *lbc= &immap->lbus;
+ uint *sdram_addr = (uint *)CFG_LBC_SDRAM_BASE;
+
+ puts("\n SDRAM on Local Bus: ");
+ print_size (CFG_LBC_SDRAM_SIZE * 1024 * 1024, "\n");
+
+ /*
+ * Setup SDRAM Base and Option Registers, already done in cpu_init.c
+ */
+
+ /* setup mtrpt, lsrt and lbcr for LB bus */
+ lbc->lbcr = CFG_LBC_LBCR;
+ lbc->mrtpr = CFG_LBC_MRTPR;
+ lbc->lsrt = CFG_LBC_LSRT;
+ asm("sync");
+
+ /*
+ * Configure the SDRAM controller Machine Mode Register.
+ */
+ lbc->lsdmr = CFG_LBC_LSDMR_5; /* 0x40636733; normal operation */
+
+ lbc->lsdmr = CFG_LBC_LSDMR_1; /* 0x68636733; precharge all the banks */
+ asm("sync");
+ *sdram_addr = 0xff;
+ udelay(100);
+
+ lbc->lsdmr = CFG_LBC_LSDMR_2; /* 0x48636733; auto refresh */
+ asm("sync");
+ /*1 times*/
+ *sdram_addr = 0xff;
+ udelay(100);
+ /*2 times*/
+ *sdram_addr = 0xff;
+ udelay(100);
+ /*3 times*/
+ *sdram_addr = 0xff;
+ udelay(100);
+ /*4 times*/
+ *sdram_addr = 0xff;
+ udelay(100);
+ /*5 times*/
+ *sdram_addr = 0xff;
+ udelay(100);
+ /*6 times*/
+ *sdram_addr = 0xff;
+ udelay(100);
+ /*7 times*/
+ *sdram_addr = 0xff;
+ udelay(100);
+ /*8 times*/
+ *sdram_addr = 0xff;
+ udelay(100);
+
+ /* 0x58636733; mode register write operation */
+ lbc->lsdmr = CFG_LBC_LSDMR_4;
+ asm("sync");
+ *sdram_addr = 0xff;
+ udelay(100);
+
+ lbc->lsdmr = CFG_LBC_LSDMR_5; /* 0x40636733; normal operation */
+ asm("sync");
+ *sdram_addr = 0xff;
+ udelay(100);
+}
+#else
+void sdram_init(void)
+{
+ puts(" SDRAM on Local Bus: Disabled in config\n");
+}
+#endif
+
+#if defined(CONFIG_DDR_ECC) && defined(CONFIG_DDR_ECC_CMD)
+/*
+ * ECC user commands
+ */
+void ecc_print_status(void)
+{
+ volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile ddr83xx_t *ddr = &immap->ddr;
+
+ printf("\nECC mode: %s\n\n", (ddr->sdram_cfg & SDRAM_CFG_ECC_EN) ? "ON" : "OFF");
+
+ /* Interrupts */
+ printf("Memory Error Interrupt Enable:\n");
+ printf(" Multiple-Bit Error Interrupt Enable: %d\n",
+ (ddr->err_int_en & ECC_ERR_INT_EN_MBEE) ? 1 : 0);
+ printf(" Single-Bit Error Interrupt Enable: %d\n",
+ (ddr->err_int_en & ECC_ERR_INT_EN_SBEE) ? 1 : 0);
+ printf(" Memory Select Error Interrupt Enable: %d\n\n",
+ (ddr->err_int_en & ECC_ERR_INT_EN_MSEE) ? 1 : 0);
+
+ /* Error disable */
+ printf("Memory Error Disable:\n");
+ printf(" Multiple-Bit Error Disable: %d\n",
+ (ddr->err_disable & ECC_ERROR_DISABLE_MBED) ? 1 : 0);
+ printf(" Sinle-Bit Error Disable: %d\n",
+ (ddr->err_disable & ECC_ERROR_DISABLE_SBED) ? 1 : 0);
+ printf(" Memory Select Error Disable: %d\n\n",
+ (ddr->err_disable & ECC_ERROR_DISABLE_MSED) ? 1 : 0);
+
+ /* Error injection */
+ printf("Memory Data Path Error Injection Mask High/Low: %08lx %08lx\n",
+ ddr->data_err_inject_hi, ddr->data_err_inject_lo);
+
+ printf("Memory Data Path Error Injection Mask ECC:\n");
+ printf(" ECC Mirror Byte: %d\n",
+ (ddr->ecc_err_inject & ECC_ERR_INJECT_EMB) ? 1 : 0);
+ printf(" ECC Injection Enable: %d\n",
+ (ddr->ecc_err_inject & ECC_ERR_INJECT_EIEN) ? 1 : 0);
+ printf(" ECC Error Injection Mask: 0x%02x\n\n",
+ ddr->ecc_err_inject & ECC_ERR_INJECT_EEIM);
+
+ /* SBE counter/threshold */
+ printf("Memory Single-Bit Error Management (0..255):\n");
+ printf(" Single-Bit Error Threshold: %d\n",
+ (ddr->err_sbe & ECC_ERROR_MAN_SBET) >> ECC_ERROR_MAN_SBET_SHIFT);
+ printf(" Single-Bit Error Counter: %d\n\n",
+ (ddr->err_sbe & ECC_ERROR_MAN_SBEC) >> ECC_ERROR_MAN_SBEC_SHIFT);
+
+ /* Error detect */
+ printf("Memory Error Detect:\n");
+ printf(" Multiple Memory Errors: %d\n",
+ (ddr->err_detect & ECC_ERROR_DETECT_MME) ? 1 : 0);
+ printf(" Multiple-Bit Error: %d\n",
+ (ddr->err_detect & ECC_ERROR_DETECT_MBE) ? 1 : 0);
+ printf(" Single-Bit Error: %d\n",
+ (ddr->err_detect & ECC_ERROR_DETECT_SBE) ? 1 : 0);
+ printf(" Memory Select Error: %d\n\n",
+ (ddr->err_detect & ECC_ERROR_DETECT_MSE) ? 1 : 0);
+
+ /* Capture data */
+ printf("Memory Error Address Capture: 0x%08lx\n", ddr->capture_address);
+ printf("Memory Data Path Read Capture High/Low: %08lx %08lx\n",
+ ddr->capture_data_hi, ddr->capture_data_lo);
+ printf("Memory Data Path Read Capture ECC: 0x%02x\n\n",
+ ddr->capture_ecc & CAPTURE_ECC_ECE);
+
+ printf("Memory Error Attributes Capture:\n");
+ printf(" Data Beat Number: %d\n",
+ (ddr->capture_attributes & ECC_CAPT_ATTR_BNUM) >> ECC_CAPT_ATTR_BNUM_SHIFT);
+ printf(" Transaction Size: %d\n",
+ (ddr->capture_attributes & ECC_CAPT_ATTR_TSIZ) >> ECC_CAPT_ATTR_TSIZ_SHIFT);
+ printf(" Transaction Source: %d\n",
+ (ddr->capture_attributes & ECC_CAPT_ATTR_TSRC) >> ECC_CAPT_ATTR_TSRC_SHIFT);
+ printf(" Transaction Type: %d\n",
+ (ddr->capture_attributes & ECC_CAPT_ATTR_TTYP) >> ECC_CAPT_ATTR_TTYP_SHIFT);
+ printf(" Error Information Valid: %d\n\n",
+ ddr->capture_attributes & ECC_CAPT_ATTR_VLD);
+}
+
+int do_ecc ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile ddr83xx_t *ddr = &immap->ddr;
+ volatile u32 val;
+ u64 *addr, count, val64;
+ register u64 *i;
+
+ if (argc > 4) {
+ printf ("Usage:\n%s\n", cmdtp->usage);
+ return 1;
+ }
+
+ if (argc == 2) {
+ if (strcmp(argv[1], "status") == 0) {
+ ecc_print_status();
+ return 0;
+ } else if (strcmp(argv[1], "captureclear") == 0) {
+ ddr->capture_address = 0;
+ ddr->capture_data_hi = 0;
+ ddr->capture_data_lo = 0;
+ ddr->capture_ecc = 0;
+ ddr->capture_attributes = 0;
+ return 0;
+ }
+ }
+
+ if (argc == 3) {
+ if (strcmp(argv[1], "sbecnt") == 0) {
+ val = simple_strtoul(argv[2], NULL, 10);
+ if (val > 255) {
+ printf("Incorrect Counter value, should be 0..255\n");
+ return 1;
+ }
+
+ val = (val << ECC_ERROR_MAN_SBEC_SHIFT);
+ val |= (ddr->err_sbe & ECC_ERROR_MAN_SBET);
+
+ ddr->err_sbe = val;
+ return 0;
+ } else if (strcmp(argv[1], "sbethr") == 0) {
+ val = simple_strtoul(argv[2], NULL, 10);
+ if (val > 255) {
+ printf("Incorrect Counter value, should be 0..255\n");
+ return 1;
+ }
+
+ val = (val << ECC_ERROR_MAN_SBET_SHIFT);
+ val |= (ddr->err_sbe & ECC_ERROR_MAN_SBEC);
+
+ ddr->err_sbe = val;
+ return 0;
+ } else if (strcmp(argv[1], "errdisable") == 0) {
+ val = ddr->err_disable;
+
+ if (strcmp(argv[2], "+sbe") == 0) {
+ val |= ECC_ERROR_DISABLE_SBED;
+ } else if (strcmp(argv[2], "+mbe") == 0) {
+ val |= ECC_ERROR_DISABLE_MBED;
+ } else if (strcmp(argv[2], "+mse") == 0) {
+ val |= ECC_ERROR_DISABLE_MSED;
+ } else if (strcmp(argv[2], "+all") == 0) {
+ val |= (ECC_ERROR_DISABLE_SBED |
+ ECC_ERROR_DISABLE_MBED |
+ ECC_ERROR_DISABLE_MSED);
+ } else if (strcmp(argv[2], "-sbe") == 0) {
+ val &= ~ECC_ERROR_DISABLE_SBED;
+ } else if (strcmp(argv[2], "-mbe") == 0) {
+ val &= ~ECC_ERROR_DISABLE_MBED;
+ } else if (strcmp(argv[2], "-mse") == 0) {
+ val &= ~ECC_ERROR_DISABLE_MSED;
+ } else if (strcmp(argv[2], "-all") == 0) {
+ val &= ~(ECC_ERROR_DISABLE_SBED |
+ ECC_ERROR_DISABLE_MBED |
+ ECC_ERROR_DISABLE_MSED);
+ } else {
+ printf("Incorrect err_disable field\n");
+ return 1;
+ }
+
+ ddr->err_disable = val;
+ __asm__ __volatile__ ("sync");
+ __asm__ __volatile__ ("isync");
+ return 0;
+ } else if (strcmp(argv[1], "errdetectclr") == 0) {
+ val = ddr->err_detect;
+
+ if (strcmp(argv[2], "mme") == 0) {
+ val |= ECC_ERROR_DETECT_MME;
+ } else if (strcmp(argv[2], "sbe") == 0) {
+ val |= ECC_ERROR_DETECT_SBE;
+ } else if (strcmp(argv[2], "mbe") == 0) {
+ val |= ECC_ERROR_DETECT_MBE;
+ } else if (strcmp(argv[2], "mse") == 0) {
+ val |= ECC_ERROR_DETECT_MSE;
+ } else if (strcmp(argv[2], "all") == 0) {
+ val |= (ECC_ERROR_DETECT_MME |
+ ECC_ERROR_DETECT_MBE |
+ ECC_ERROR_DETECT_SBE |
+ ECC_ERROR_DETECT_MSE);
+ } else {
+ printf("Incorrect err_detect field\n");
+ return 1;
+ }
+
+ ddr->err_detect = val;
+ return 0;
+ } else if (strcmp(argv[1], "injectdatahi") == 0) {
+ val = simple_strtoul(argv[2], NULL, 16);
+
+ ddr->data_err_inject_hi = val;
+ return 0;
+ } else if (strcmp(argv[1], "injectdatalo") == 0) {
+ val = simple_strtoul(argv[2], NULL, 16);
+
+ ddr->data_err_inject_lo = val;
+ return 0;
+ } else if (strcmp(argv[1], "injectecc") == 0) {
+ val = simple_strtoul(argv[2], NULL, 16);
+ if (val > 0xff) {
+ printf("Incorrect ECC inject mask, should be 0x00..0xff\n");
+ return 1;
+ }
+ val |= (ddr->ecc_err_inject & ~ECC_ERR_INJECT_EEIM);
+
+ ddr->ecc_err_inject = val;
+ return 0;
+ } else if (strcmp(argv[1], "inject") == 0) {
+ val = ddr->ecc_err_inject;
+
+ if (strcmp(argv[2], "en") == 0)
+ val |= ECC_ERR_INJECT_EIEN;
+ else if (strcmp(argv[2], "dis") == 0)
+ val &= ~ECC_ERR_INJECT_EIEN;
+ else
+ printf("Incorrect command\n");
+
+ ddr->ecc_err_inject = val;
+ __asm__ __volatile__ ("sync");
+ __asm__ __volatile__ ("isync");
+ return 0;
+ } else if (strcmp(argv[1], "mirror") == 0) {
+ val = ddr->ecc_err_inject;
+
+ if (strcmp(argv[2], "en") == 0)
+ val |= ECC_ERR_INJECT_EMB;
+ else if (strcmp(argv[2], "dis") == 0)
+ val &= ~ECC_ERR_INJECT_EMB;
+ else
+ printf("Incorrect command\n");
+
+ ddr->ecc_err_inject = val;
+ return 0;
+ }
+ }
+
+ if (argc == 4) {
+ if (strcmp(argv[1], "test") == 0) {
+ addr = (u64 *)simple_strtoul(argv[2], NULL, 16);
+ count = simple_strtoul(argv[3], NULL, 16);
+
+ if ((u32)addr % 8) {
+ printf("Address not alligned on double word boundary\n");
+ return 1;
+ }
+
+ disable_interrupts();
+ icache_disable();
+
+ for (i = addr; i < addr + count; i++) {
+ /* enable injects */
+ ddr->ecc_err_inject |= ECC_ERR_INJECT_EIEN;
+ __asm__ __volatile__ ("sync");
+ __asm__ __volatile__ ("isync");
+
+ /* write memory location injecting errors */
+ *i = 0x1122334455667788ULL;
+ __asm__ __volatile__ ("sync");
+
+ /* disable injects */
+ ddr->ecc_err_inject &= ~ECC_ERR_INJECT_EIEN;
+ __asm__ __volatile__ ("sync");
+ __asm__ __volatile__ ("isync");
+
+ /* read data, this generates ECC error */
+ val64 = *i;
+ __asm__ __volatile__ ("sync");
+
+ /* disable errors for ECC */
+ ddr->err_disable |= ~ECC_ERROR_ENABLE;
+ __asm__ __volatile__ ("sync");
+ __asm__ __volatile__ ("isync");
+
+ /* re-initialize memory, write the location again
+ * NOT injecting errors this time */
+ *i = 0xcafecafecafecafeULL;
+ __asm__ __volatile__ ("sync");
+
+ /* enable errors for ECC */
+ ddr->err_disable &= ECC_ERROR_ENABLE;
+ __asm__ __volatile__ ("sync");
+ __asm__ __volatile__ ("isync");
+ }
+
+ icache_enable();
+ enable_interrupts();
+
+ return 0;
+ }
+ }
+
+ printf ("Usage:\n%s\n", cmdtp->usage);
+ return 1;
+}
+
+U_BOOT_CMD(
+ ecc, 4, 0, do_ecc,
+ "ecc - support for DDR ECC features\n",
+ "status - print out status info\n"
+ "ecc captureclear - clear capture regs data\n"
+ "ecc sbecnt <val> - set Single-Bit Error counter\n"
+ "ecc sbethr <val> - set Single-Bit Threshold\n"
+ "ecc errdisable <flag> - clear/set disable Memory Error Disable, flag:\n"
+ " [-|+]sbe - Single-Bit Error\n"
+ " [-|+]mbe - Multiple-Bit Error\n"
+ " [-|+]mse - Memory Select Error\n"
+ " [-|+]all - all errors\n"
+ "ecc errdetectclr <flag> - clear Memory Error Detect, flag:\n"
+ " mme - Multiple Memory Errors\n"
+ " sbe - Single-Bit Error\n"
+ " mbe - Multiple-Bit Error\n"
+ " mse - Memory Select Error\n"
+ " all - all errors\n"
+ "ecc injectdatahi <hi> - set Memory Data Path Error Injection Mask High\n"
+ "ecc injectdatalo <lo> - set Memory Data Path Error Injection Mask Low\n"
+ "ecc injectecc <ecc> - set ECC Error Injection Mask\n"
+ "ecc inject <en|dis> - enable/disable error injection\n"
+ "ecc mirror <en|dis> - enable/disable mirror byte\n"
+ "ecc test <addr> <cnt> - test mem region:\n"
+ " - enables injects\n"
+ " - writes pattern injecting errors\n"
+ " - disables injects\n"
+ " - reads pattern back, generates error\n"
+ " - re-inits memory"
+);
+#endif /* if defined(CONFIG_DDR_ECC) && defined(CONFIG_DDR_ECC_CMD) */
+
+#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
+void
+ft_board_setup(void *blob, bd_t *bd)
+{
+ u32 *p;
+ int len;
+
+#ifdef CONFIG_PCI
+ ft_pci_setup(blob, bd);
+#endif
+ ft_cpu_setup(blob, bd);
+
+ p = ft_get_prop(blob, "/memory/reg", &len);
+ if (p != NULL) {
+ *p++ = cpu_to_be32(bd->bi_memstart);
+ *p = cpu_to_be32(bd->bi_memsize);
+ }
+}
+#endif
diff --git a/board/sbc8349/u-boot.lds b/board/sbc8349/u-boot.lds
new file mode 100644
index 0000000000..e32c0754cf
--- /dev/null
+++ b/board/sbc8349/u-boot.lds
@@ -0,0 +1,125 @@
+/*
+ * Copyright (c) 2006 Wind River Systems, Inc.
+ * u-boot.lds for WindRiver SBC8349.
+ *
+ * Based on the MPC8349 u-boot.lds
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ cpu/mpc83xx/start.o (.text)
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ . = ALIGN(16);
+ *(.rodata)
+ *(.rodata1)
+ *(.rodata.str1.4)
+ *(.eh_frame)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x0FFF) & 0xFFFFF000;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
+ __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
+ . = .;
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(4096);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(4096);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
+ENTRY(_start)