diff options
Diffstat (limited to 'board/samtec/vining_2000/imximage.cfg')
| -rw-r--r-- | board/samtec/vining_2000/imximage.cfg | 132 |
1 files changed, 132 insertions, 0 deletions
diff --git a/board/samtec/vining_2000/imximage.cfg b/board/samtec/vining_2000/imximage.cfg new file mode 100644 index 0000000000..4133ddad2e --- /dev/null +++ b/board/samtec/vining_2000/imximage.cfg @@ -0,0 +1,132 @@ +/* + * Copyright (C) 2016 samtec automotive software & electronics gmbh + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#define __ASSEMBLY__ +#include <config.h> + +/* image version */ + +IMAGE_VERSION 2 + +/* + * Boot Device : one of + * spi/sd/nand/onenand, qspi/nor + */ + +BOOT_FROM sd + +/* + * Device Configuration Data (DCD) + * + * Each entry must have the format: + * Addr-type Address Value + * + * where: + * Addr-type register length (1,2 or 4 bytes) + * Address absolute address of the register + * value value to be stored in the register + */ + +/* Enable all clocks */ +DATA 4 0x020c4068 0xffffffff +DATA 4 0x020c406c 0xffffffff +DATA 4 0x020c4070 0xffffffff +DATA 4 0x020c4074 0xffffffff +DATA 4 0x020c4078 0xffffffff +DATA 4 0x020c407c 0xffffffff +DATA 4 0x020c4080 0xffffffff +DATA 4 0x020c4084 0xffffffff + +/* IOMUX - DDR IO Type */ +DATA 4 0x020e0618 0x000c0000 +DATA 4 0x020e05fc 0x00000000 + +/* Clock */ +DATA 4 0x020e032c 0x00000030 + +/* Address */ +DATA 4 0x020e0300 0x00000028 +DATA 4 0x020e02fc 0x00000028 +DATA 4 0x020e05f4 0x00000028 + +/* Control */ +DATA 4 0x020e0340 0x00000028 + +DATA 4 0x020e0320 0x00000000 +DATA 4 0x020e0310 0x00000028 +DATA 4 0x020e0314 0x00000028 +DATA 4 0x020e0614 0x00000028 + +/* Data Strobe */ +DATA 4 0x020e05f8 0x00020000 +DATA 4 0x020e0330 0x00000028 +DATA 4 0x020e0334 0x00000028 +DATA 4 0x020e0338 0x00000028 +DATA 4 0x020e033c 0x00000028 + +/* Data */ +DATA 4 0x020e0608 0x00020000 +DATA 4 0x020e060c 0x00000028 +DATA 4 0x020e0610 0x00000028 +DATA 4 0x020e061c 0x00000028 +DATA 4 0x020e0620 0x00000028 +DATA 4 0x020e02ec 0x00000028 +DATA 4 0x020e02f0 0x00000028 +DATA 4 0x020e02f4 0x00000028 +DATA 4 0x020e02f8 0x00000028 + +/* Calibrations - ZQ */ +DATA 4 0x021b0800 0xa1390003 + +/* Write leveling */ +DATA 4 0x021b080c 0x00290025 +DATA 4 0x021b0810 0x00210022 + +/* DQS Read Gate */ +DATA 4 0x021b083c 0x4142013a +DATA 4 0x021b0840 0x012e0123 + +/* Read/Write Delay */ +DATA 4 0x021b0848 0x43474949 +DATA 4 0x021b0850 0x38383c38 + +/* Read data bit delay */ +DATA 4 0x021b081c 0x33333333 +DATA 4 0x021b0820 0x33333333 +DATA 4 0x021b0824 0x33333333 +DATA 4 0x021b0828 0x33333333 + +/* Complete calibration by forced measurement */ +DATA 4 0x021b08b8 0x00000800 + +/* MMDC init - DDR3, 64-bit mode, only MMDC0 is initiated */ +DATA 4 0x021b0004 0x0002002d +DATA 4 0x021b0008 0x00333040 +DATA 4 0x021b000c 0x676b52f2 +DATA 4 0x021b0010 0x926e8b63 +DATA 4 0x021b0014 0x01ff00db +DATA 4 0x021b0018 0x00011740 +DATA 4 0x021b001c 0x00008000 +DATA 4 0x021b002c 0x000026d2 +DATA 4 0x021b0030 0x006b1023 +DATA 4 0x021b0040 0x0000005f +DATA 4 0x021b0000 0x84190000 + +/* Initialize MT41K256M16HA-125 - MR2 */ +DATA 4 0x021b001c 0x02008032 +/* MR3 */ +DATA 4 0x021b001c 0x00008033 +/* MR1 */ +DATA 4 0x021b001c 0x00048031 +/* MR0 */ +DATA 4 0x021b001c 0x15108030 +/* DDR device ZQ calibration */ +DATA 4 0x021b001c 0x04008040 + +/* Final DDR setup, before operation start */ +DATA 4 0x021b0020 0x00007800 +DATA 4 0x021b0818 0x00022227 +DATA 4 0x021b001c 0x00000000 |