summaryrefslogtreecommitdiff
path: root/board/openrisc
diff options
context:
space:
mode:
Diffstat (limited to 'board/openrisc')
-rw-r--r--board/openrisc/openrisc-generic/Kconfig12
-rw-r--r--board/openrisc/openrisc-generic/MAINTAINERS6
-rw-r--r--board/openrisc/openrisc-generic/Makefile8
-rw-r--r--board/openrisc/openrisc-generic/config.mk11
-rw-r--r--board/openrisc/openrisc-generic/openrisc-generic.c39
-rw-r--r--board/openrisc/openrisc-generic/or1ksim.cfg871
6 files changed, 0 insertions, 947 deletions
diff --git a/board/openrisc/openrisc-generic/Kconfig b/board/openrisc/openrisc-generic/Kconfig
deleted file mode 100644
index cd2a94f025..0000000000
--- a/board/openrisc/openrisc-generic/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_OPENRISC_GENERIC
-
-config SYS_BOARD
- default "openrisc-generic"
-
-config SYS_VENDOR
- default "openrisc"
-
-config SYS_CONFIG_NAME
- default "openrisc-generic"
-
-endif
diff --git a/board/openrisc/openrisc-generic/MAINTAINERS b/board/openrisc/openrisc-generic/MAINTAINERS
deleted file mode 100644
index c8dbc742e2..0000000000
--- a/board/openrisc/openrisc-generic/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-OPENRISC-GENERIC BOARD
-M: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
-S: Maintained
-F: board/openrisc/openrisc-generic/
-F: include/configs/openrisc-generic.h
-F: configs/openrisc-generic_defconfig
diff --git a/board/openrisc/openrisc-generic/Makefile b/board/openrisc/openrisc-generic/Makefile
deleted file mode 100644
index 342bc80450..0000000000
--- a/board/openrisc/openrisc-generic/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y := openrisc-generic.o
diff --git a/board/openrisc/openrisc-generic/config.mk b/board/openrisc/openrisc-generic/config.mk
deleted file mode 100644
index dd6595f757..0000000000
--- a/board/openrisc/openrisc-generic/config.mk
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# (C) Copyright 2011, Julius Baxter <julius@opencores.org>
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-PLATFORM_CPPFLAGS += -mhard-mul -mhard-div
-
-ifeq ($(debug),1)
-PLATFORM_CPPFLAGS += -DDEBUG
-endif
diff --git a/board/openrisc/openrisc-generic/openrisc-generic.c b/board/openrisc/openrisc-generic/openrisc-generic.c
deleted file mode 100644
index 4f82600bbb..0000000000
--- a/board/openrisc/openrisc-generic/openrisc-generic.c
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * Based on nios2-generic.c:
- * (C) Copyright 2005, Psyent Corporation <www.psyent.com>
- * Scott McNutt <smcnutt@psyent.com>
- * (C) Copyright 2010, Thomas Chou <thomas@wytron.com.tw>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <netdev.h>
-
-int board_early_init_f(void)
-{
- return 0;
-}
-
-int checkboard(void)
-{
- printf("BOARD: %s\n", CONFIG_BOARD_NAME);
- return 0;
-}
-
-phys_size_t initdram(int board_type)
-{
- return 0;
-}
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
-
-#ifdef CONFIG_ETHOC
- rc += ethoc_initialize(0, CONFIG_SYS_ETHOC_BASE);
-#endif
- return rc;
-}
-#endif
diff --git a/board/openrisc/openrisc-generic/or1ksim.cfg b/board/openrisc/openrisc-generic/or1ksim.cfg
deleted file mode 100644
index 2bd8642932..0000000000
--- a/board/openrisc/openrisc-generic/or1ksim.cfg
+++ /dev/null
@@ -1,871 +0,0 @@
-/* sim.cfg -- Simulator configuration script file
- Copyright (C) 2001-2002, Marko Mlinar, markom@opencores.org
-
-This file is part of OpenRISC 1000 Architectural Simulator.
-It contains the default configuration and help about configuring
-the simulator.
-
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-
-/* INTRODUCTION
-
- The ork1sim has various parameters, that are set in configuration files
- like this one. The user can switch between configurations at startup by
- specifying the required configuration file with the -f <filename.cfg> option.
- If no configuration file is specified or1ksim searches for the default
- configuration file sim.cfg. First it searches for './sim.cfg'. If this
- file is not found, it searches for '~/or1k/sim.cfg'. If this file is
- not found too, it reverts to the built-in default configuration.
-
- NOTE: Users should not rely on the built-in configuration, since the
- default configuration may differ between version.
- Rather create a configuration file that sets all critical values.
-
- This file may contain (standard C) comments only - no // support.
-
- Configure files may be be included, using:
- include "file_name_to_include"
-
- Like normal configuration files, the included file is divided into
- sections. Each section is described in detail also.
-
- Some section have subsections. One example of such a subsection is:
-
- device <index>
- instance specific parameters...
- enddevice
-
- which creates a device instance.
-*/
-
-
-/* MEMORY SECTION
-
- This section specifies how the memory is generated and the blocks
- it consists of.
-
- type = random/unknown/pattern
- Specifies the initial memory values.
- 'random' generates random memory using seed 'random_seed'.
- 'pattern' fills memory with 'pattern'.
- 'unknown' does not specify how memory should be generated,
- leaving the memory in a undefined state. This is the fastest
- option.
-
- random_seed = <value>
- random seed for randomizer, used if type = 'random'.
-
- pattern = <value>
- pattern to fill memory, used if type = 'pattern'.
-
- nmemories = <value>
- number of memory instances connected
-
- baseaddr = <hex_value>
- memory start address
-
- size = <hex_value>
- memory size
-
- name = "<string>"
- memory block name
-
- ce = <value>
- chip enable index of the memory instance
-
- mc = <value>
- memory controller this memory is connected to
-
- delayr = <value>
- cycles, required for read access, -1 if instance does not support reading
-
- delayw = <value>
- cycles, required for write access, -1 if instance does not support writing
-
- log = "<filename>"
- filename, where to log memory accesses to, no log, if log command is not specified
-*/
-
-
-section memory
- pattern = 0x00
- type = unknown /* Fastest */
-
- name = "FLASH"
- ce = 0
- mc = 0
- baseaddr = 0xf0000000
- size = 0x01000000
- delayr = 1
- delayw = -1
-end
-
-section memory
- pattern = 0x00
- type = unknown /* Fastest */
-
- name = "RAM"
- ce = 1
- mc = 0
- baseaddr = 0x00000000
- size = 0x02000000
- delayr = 1
- delayw = 1
-end
-
-section memory
- pattern = 0x00
- type = unknown /* Fastest */
-
- name = "SRAM"
- mc = 0
- ce = 2
- baseaddr = 0xa4000000
- size = 0x00100000
- delayr = 1
- delayw = 2
-end
-
-
-/* IMMU SECTION
-
- This section configures the Instruction Memory Manangement Unit
-
- enabled = 0/1
- '0': disabled
- '1': enabled
- (NOTE: UPR bit is set)
-
- nsets = <value>
- number of ITLB sets; must be power of two
-
- nways = <value>
- number of ITLB ways
-
- pagesize = <value>
- instruction page size; must be power of two
-
- entrysize = <value>
- instruction entry size in bytes
-
- ustates = <value>
- number of ITLB usage states (2, 3, 4 etc., max is 4)
-
- hitdelay = <value>
- number of cycles immu hit costs
-
- missdelay = <value>
- number of cycles immu miss costs
-*/
-
-section immu
- enabled = 1
- nsets = 64
- nways = 1
- pagesize = 8192
- hitdelay = 0
- missdelay = 0
-end
-
-
-/* DMMU SECTION
-
- This section configures the Data Memory Manangement Unit
-
- enabled = 0/1
- '0': disabled
- '1': enabled
- (NOTE: UPR bit is set)
-
- nsets = <value>
- number of DTLB sets; must be power of two
-
- nways = <value>
- number of DTLB ways
-
- pagesize = <value>
- data page size; must be power of two
-
- entrysize = <value>
- data entry size in bytes
-
- ustates = <value>
- number of DTLB usage states (2, 3, 4 etc., max is 4)
-
- hitdelay = <value>
- number of cycles dmmu hit costs
-
- missdelay = <value>
- number of cycles dmmu miss costs
-*/
-
-section dmmu
- enabled = 1
- nsets = 64
- nways = 1
- pagesize = 8192
- hitdelay = 0
- missdelay = 0
-end
-
-
-/* IC SECTION
-
- This section configures the Instruction Cache
-
- enabled = 0/1
- '0': disabled
- '1': enabled
- (NOTE: UPR bit is set)
-
- nsets = <value>
- number of IC sets; must be power of two
-
- nways = <value>
- number of IC ways
-
- blocksize = <value>
- IC block size in bytes; must be power of two
-
- ustates = <value>
- number of IC usage states (2, 3, 4 etc., max is 4)
-
- hitdelay = <value>
- number of cycles ic hit costs
-
- missdelay = <value>
- number of cycles ic miss costs
-*/
-
-section ic
- enabled = 1
- nsets = 512
- nways = 1
- blocksize = 16
- hitdelay = 1
- missdelay = 1
-end
-
-
-/* DC SECTION
-
- This section configures the Data Cache
-
- enabled = 0/1
- '0': disabled
- '1': enabled
- (NOTE: UPR bit is set)
-
- nsets = <value>
- number of DC sets; must be power of two
-
- nways = <value>
- number of DC ways
-
- blocksize = <value>
- DC block size in bytes; must be power of two
-
- ustates = <value>
- number of DC usage states (2, 3, 4 etc., max is 4)
-
- load_hitdelay = <value>
- number of cycles dc load hit costs
-
- load_missdelay = <value>
- number of cycles dc load miss costs
-
- store_hitdelay = <value>
- number of cycles dc load hit costs
-
- store_missdelay = <value>
- number of cycles dc load miss costs
-*/
-
-section dc
- enabled = 1
- nsets = 512
- nways = 1
- blocksize = 16
- load_hitdelay = 1
- load_missdelay = 1
- store_hitdelay = 1
- store_missdelay = 1
-end
-
-
-/* SIM SECTION
-
- This section specifies how or1ksim should behave.
-
- verbose = 0/1
- '0': don't print extra messages
- '1': print extra messages
-
- debug = 0-9
- 0 : no debug messages
- 1-9: debug message level.
- higher numbers produce more messages
-
- profile = 0/1
- '0': don't generate profiling file 'sim.profile'
- '1': don't generate profiling file 'sim.profile'
-
- prof_fn = "<filename>"
- optional filename for the profiling file.
- valid only if 'profile' is set
-
- mprofile = 0/1
- '0': don't generate memory profiling file 'sim.mprofile'
- '1': generate memory profiling file 'sim.mprofile'
-
- mprof_fn = "<filename>"
- optional filename for the memory profiling file.
- valid only if 'mprofile' is set
-
- history = 0/1
- '0': don't track execution flow
- '1': track execution flow
- Execution flow can be tracked for the simulator's
- 'hist' command. Useful for back-trace debugging.
-
- iprompt = 0/1
- '0': start in <not interactive prompt> (so what do we start in ???)
- '1': start in interactive prompt.
-
- exe_log = 0/1
- '0': don't generate execution log.
- '1': generate execution log.
-
- exe_log = default/hardware/simple/software
- type of execution log, default is used when not specified
-
- exe_log_start = <value>
- index of first instruction to start logging, default = 0
-
- exe_log_end = <value>
- index of last instruction to end logging; not limited, if omitted
-
- exe_log_marker = <value>
- <value> specifies number of instructions before horizontal marker is
- printed; if zero, markers are disabled (default)
-
- exe_log_fn = "<filename>"
- filename for the exection log file.
- valid only if 'exe_log' is set
-
- clkcycle = <value>[ps|ns|us|ms]
- specifies time measurement for one cycle
-*/
-
-section sim
- verbose = 1
- debug = 0
- profile = 0
- history = 0
-
- clkcycle = 10ns
-end
-
-
-/* SECTION VAPI
-
- This section configures the Verification API, used for Advanced
- Core Verification.
-
- enabled = 0/1
- '0': disbable VAPI server
- '1': enable/start VAPI server
-
- server_port = <value>
- TCP/IP port to start VAPI server on
-
- log_enabled = 0/1
- '0': disable VAPI requests logging
- '1': enable VAPI requests logging
-
- hide_device_id = 0/1
- '0': don't log device id (for compatability with old version)
- '1': log device id
-
-
- vapi_fn = <filename>
- filename for the log file.
- valid only if log_enabled is set
-*/
-
-section VAPI
- enabled = 0
- server_port = 9998
- log_enabled = 0
- vapi_log_fn = "vapi.log"
-end
-
-
-/* CPU SECTION
-
- This section specifies various CPU parameters.
-
- ver = <value>
- rev = <value>
- specifies version and revision of the CPU used
-
- upr = <value>
- changes the upr register
-
- sr = <value>
- sets the initial Supervision Register value
- supervisor mode (SM) and fixed one (FO) set = 0x8001
- exception prefix high (EPH, vectors@0xf0000000) = 0x4000
- together, (SM | FO | EPH) = 0xc001
- superscalar = 0/1
- '0': CPU is scalar
- '1': CPU is superscalar
- (modify cpu/or32/execute.c to tune superscalar model)
-
- hazards = 0/1
- '0': don't track data hazards in superscalar CPU
- '1': track data hazards in superscalar CPU
- If tracked, data hazards can be displayed using the
- simulator's 'r' command.
-
- dependstats = 0/1
- '0': don't calculate inter-instruction dependencies.
- '1': calculate inter-instruction dependencies.
- If calculated, inter-instruction dependencies can be
- displayed using the simulator's 'stat' command.
-
- sbuf_len = <value>
- length of store buffer (<= 256), 0 = disabled
-*/
-
-section cpu
- ver = 0x12
- cfg = 0x00
- rev = 0x01
- sr = 0x8001 /*SPR_SR_FO | SPR_SR_SM | SPR_SR_EPH */
- /* upr = */
- superscalar = 0
- hazards = 0
- dependstats = 0
- sbuf_len = 0
-end
-
-
-/* PM SECTION
-
- This section specifies Power Management parameters
-
- enabled = 0/1
- '0': disable power management
- '1': enable power management
-*/
-
-section pm
- enabled = 0
-end
-
-
-/* BPB SECTION
-
- This section specifies how branch prediction should behave.
-
- enabled = 0/1
- '0': disable branch prediction
- '1': enable branch prediction
-
- btic = 0/1
- '0': disable branch target instruction cache model
- '1': enable branch target instruction cache model
-
- sbp_bf_fwd = 0/1
- Static branch prediction for 'l.bf'
- '0': don't use forward prediction
- '1': use forward prediction
-
- sbp_bnf_fwd = 0/1
- Static branch prediction for 'l.bnf'
- '0': don't use forward prediction
- '1': use forward prediction
-
- hitdelay = <value>
- number of cycles bpb hit costs
-
- missdelay = <value>
- number of cycles bpb miss costs
-*/
-
-section bpb
- enabled = 0
- btic = 0
- sbp_bf_fwd = 0
- sbp_bnf_fwd = 0
- hitdelay = 0
- missdelay = 0
-end
-
-
-/* DEBUG SECTION
-
- This sections specifies how the debug unit should behave.
-
- enabled = 0/1
- '0': disable debug unit
- '1': enable debug unit
-
- gdb_enabled = 0/1
- '0': don't start gdb server
- '1': start gdb server at port 'server_port'
-
- server_port = <value>
- TCP/IP port to start gdb server on
- valid only if gdb_enabled is set
-
- vapi_id = <hex_value>
- Used to create "fake" vapi log file containing the JTAG proxy messages.
-*/
-section debug
- enabled = 0
-/* gdb_enabled = 0 */
-/* server_port = 9999*/
- rsp_enabled = 1
- rsp_port = 50001
-end
-
-
-/* MC SECTION
-
- This section configures the memory controller
-
- enabled = 0/1
- '0': disable memory controller
- '1': enable memory controller
-
- baseaddr = <hex_value>
- address of first MC register
-
- POC = <hex_value>
- Power On Configuration register
-
- index = <value>
- Index of this memory controller amongst all the memory controllers
-*/
-
-section mc
- enabled = 0
- baseaddr = 0x93000000
- POC = 0x00000008 /* Power on configuration register */
- index = 0
-end
-
-
-/* UART SECTION
-
- This section configures the UARTs
-
- enabled = <0|1>
- Enable/disable the peripheral. By default if it is enabled.
-
- baseaddr = <hex_value>
- address of first UART register for this device
-
-
- channel = <channeltype>:<args>
-
- The channel parameter indicates the source of received UART characters
- and the sink for transmitted UART characters.
-
- The <channeltype> can be either "file", "xterm", "tcp", "fd", or "tty"
- (without quotes).
-
- A) To send/receive characters from a pair of files, use a file
- channel:
-
- channel=file:<rxfile>,<txfile>
-
- B) To create an interactive terminal window, use an xterm channel:
-
- channel=xterm:[<xterm_arg>]*
-
- C) To create a bidirectional tcp socket which one could, for example,
- access via telnet, use a tcp channel:
-
- channel=tcp:<port number>
-
- D) To cause the UART to read/write from existing numeric file
- descriptors, use an fd channel:
-
- channel=fd:<rx file descriptor num>,<tx file descriptor num>
-
- E) To connect the UART to a physical serial port, create a tty
- channel:
-
- channel=tty:device=/dev/ttyS0,baud=9600
-
- irq = <value>
- irq number for this device
-
- 16550 = 0/1
- '0': this device is a UART16450
- '1': this device is a UART16550
-
- jitter = <value>
- in msecs... time to block, -1 to disable it
-
- vapi_id = <hex_value>
- VAPI id of this instance
-*/
-
-section uart
- enabled = 1
- baseaddr = 0x90000000
- irq = 2
- /* channel = "file:uart0.rx,uart0.tx" */
- /* channel = "tcp:10084" */
- channel = "xterm:"
- jitter = -1 /* async behaviour */
- 16550 = 1
-end
-
-
-/* DMA SECTION
-
- This section configures the DMAs
-
- enabled = <0|1>
- Enable/disable the peripheral. By default if it is enabled.
-
- baseaddr = <hex_value>
- address of first DMA register for this device
-
- irq = <value>
- irq number for this device
-
- vapi_id = <hex_value>
- VAPI id of this instance
-*/
-
-section dma
- enabled = 1
- baseaddr = 0x9a000000
- irq = 11
-end
-
-
-/* ETHERNET SECTION
-
- This section configures the ETHERNETs
-
- enabled = <0|1>
- Enable/disable the peripheral. By default if it is enabled.
-
- baseaddr = <hex_value>
- address of first ethernet register for this device
-
- dma = <value>
- which controller is this ethernet "connected" to
-
- irq = <value>
- ethernet mac IRQ level
-
- rtx_type = <value>
- use 0 - file interface, 1 - socket interface
-
- rx_channel = <value>
- DMA channel used for RX
-
- tx_channel = <value>
- DMA channel used for TX
-
- rxfile = "<filename>"
- filename, where to read data from
-
- txfile = "<filename>"
- filename, where to write data to
-
- sockif = "<ifacename>"
- interface name of ethernet socket
-
- vapi_id = <hex_value>
- VAPI id of this instance
-*/
-
-section ethernet
- enabled = 1
- baseaddr = 0x92000000
- /* dma = 0 */
- irq = 4
- rtx_type = "tap"
- tap_dev = "tap0"
- /* tx_channel = 0 */
- /* rx_channel = 1 */
- rxfile = "eth0.rx"
- txfile = "eth0.tx"
- sockif = "eth0"
-end
-
-
-/* GPIO SECTION
-
- This section configures the GPIOs
-
- enabled = <0|1>
- Enable/disable the peripheral. By default if it is enabled.
-
- baseaddr = <hex_value>
- address of first GPIO register for this device
-
- irq = <value>
- irq number for this device
-
- base_vapi_id = <hex_value>
- first VAPI id of this instance
- GPIO uses 8 consecutive VAPI IDs
-*/
-
-section gpio
- enabled = 0
- baseaddr = 0x91000000
- irq = 3
- base_vapi_id = 0x0200
-end
-
-/* VGA SECTION
-
- This section configures the VGA/LCD controller
-
- enabled = <0|1>
- Enable/disable the peripheral. By default if it is enabled.
-
- baseaddr = <hex_value>
- address of first VGA register
-
- irq = <value>
- irq number for this device
-
- refresh_rate = <value>
- number of cycles between screen dumps
-
- filename = "<filename>"
- template name for generated names (e.g. "primary" produces "primary0023.bmp")
-*/
-
-section vga
- enabled = 0
- baseaddr = 0x97100000
- irq = 8
- refresh_rate = 100000
- filename = "primary"
-end
-
-
-/* TICK TIMER SECTION
-
- This section configures tick timer
-
- enabled = 0/1
- whether tick timer is enabled
-*/
-
-section pic
- enabled = 1
- edge_trigger = 1
-end
-
-/* FB SECTION
-
- This section configures the frame buffer
-
- enabled = <0|1>
- Enable/disable the peripheral. By default if it is enabled.
-
- baseaddr = <hex_value>
- base address of frame buffer
-
- paladdr = <hex_value>
- base address of first palette entry
-
- refresh_rate = <value>
- number of cycles between screen dumps
-
- filename = "<filename>"
- template name for generated names (e.g. "primary" produces "primary0023.bmp")
-*/
-
-section fb
- enabled = 0
- baseaddr = 0x97000000
- refresh_rate = 1000000
- filename = "primary"
-end
-
-
-/* KBD SECTION
-
- This section configures the PS/2 compatible keyboard
-
- baseaddr = <hex_value>
- base address of the keyboard device
-
- rxfile = "<filename>"
- filename, where to read data from
-*/
-
-section kbd
- enabled = 0
- irq = 5
- baseaddr = 0x94000000
- rxfile = "kbd.rx"
-end
-
-
-/* ATA SECTION
-
- This section configures the ATA/ATAPI host controller
-
- baseaddr = <hex_value>
- address of first ATA register
-
- enabled = <0|1>
- Enable/disable the peripheral. By default if it is enabled.
-
- irq = <value>
- irq number for this device
-
- debug = <value>
- debug level for ata models.
- 0: no debug messages
- 1: verbose messages
- 3: normal messages (more messages than verbose)
- 5: debug messages (normal debug messages)
- 7: flow control messages (debug statemachine flows)
- 9: low priority message (display everything the code does)
-
- dev_type0/1 = <value>
- ata device 0 type
- 0: NO_CONNeCT: none (not connected)
- 1: FILE : simulated harddisk
- 2: LOCAL : local system harddisk
-
- dev_file0/1 = "<filename>"
- filename for simulated ATA device
- valid only if dev_type0 == 1
-
- dev_size0/1 = <value>
- size of simulated hard-disk (in MBytes)
- valid only if dev_type0 == 1
-
- dev_packet0/1 = <value>
- 0: simulated ATA device does NOT implement PACKET command feature set
- 1: simulated ATA device does implement PACKET command feature set
-
- FIXME: irq number
-*/
-
-section ata
- enabled = 0
- baseaddr = 0x9e000000
- irq = 15
-
-end