summaryrefslogtreecommitdiff
path: root/board/omap2420h4/omap2420h4.c
diff options
context:
space:
mode:
Diffstat (limited to 'board/omap2420h4/omap2420h4.c')
-rw-r--r--board/omap2420h4/omap2420h4.c18
1 files changed, 9 insertions, 9 deletions
diff --git a/board/omap2420h4/omap2420h4.c b/board/omap2420h4/omap2420h4.c
index 09b070dc1a9..0fe9380cc9e 100644
--- a/board/omap2420h4/omap2420h4.c
+++ b/board/omap2420h4/omap2420h4.c
@@ -33,7 +33,7 @@
#include <asm/mach-types.h>
#if defined(CONFIG_CMD_NAND)
#include <linux/mtd/nand_legacy.h>
-extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE];
+extern struct nand_chip nand_dev_desc[CONFIG_SYS_MAX_NAND_DEVICE];
#endif
DECLARE_GLOBAL_DATA_PTR;
@@ -201,7 +201,7 @@ int dram_init (void)
u8 vmode_on = 0x8C;
#define NOT_EARLY 0
- i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE); /* need this a bit early */
+ i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); /* need this a bit early */
btype = get_board_type();
mtype = get_mem_type();
@@ -267,7 +267,7 @@ void peripheral_enable(void)
__raw_writel(v, CM_CLKSEL2_CORE);
__raw_writel(0x1, CM_CLKSEL_WKUP);
-#ifdef CFG_NS16550
+#ifdef CONFIG_SYS_NS16550
/* Enable UART1 clock */
func_clks |= BIT21;
if_clks |= BIT21;
@@ -852,16 +852,16 @@ void nand_init(void)
{
extern flash_info_t flash_info[];
- nand_probe(CFG_NAND_ADDR);
+ nand_probe(CONFIG_SYS_NAND_ADDR);
if (nand_dev_desc[0].ChipID != NAND_ChipID_UNKNOWN) {
print_size(nand_dev_desc[0].totlen, "\n");
}
-#ifdef CFG_JFFS2_MEM_NAND
- flash_info[CFG_JFFS2_FIRST_BANK].flash_id = nand_dev_desc[0].id;
- flash_info[CFG_JFFS2_FIRST_BANK].size = 1024*1024*2; /* only read kernel single meg partition */
- flash_info[CFG_JFFS2_FIRST_BANK].sector_count = 1024; /* 1024 blocks in 16meg chip (use less for raw/copied partition) */
- flash_info[CFG_JFFS2_FIRST_BANK].start[0] = 0x80200000; /* ?, ram for now, open question, copy to RAM or adapt for NAND */
+#ifdef CONFIG_SYS_JFFS2_MEM_NAND
+ flash_info[CONFIG_SYS_JFFS2_FIRST_BANK].flash_id = nand_dev_desc[0].id;
+ flash_info[CONFIG_SYS_JFFS2_FIRST_BANK].size = 1024*1024*2; /* only read kernel single meg partition */
+ flash_info[CONFIG_SYS_JFFS2_FIRST_BANK].sector_count = 1024; /* 1024 blocks in 16meg chip (use less for raw/copied partition) */
+ flash_info[CONFIG_SYS_JFFS2_FIRST_BANK].start[0] = 0x80200000; /* ?, ram for now, open question, copy to RAM or adapt for NAND */
#endif
}
#endif