summaryrefslogtreecommitdiff
path: root/board/nx823
diff options
context:
space:
mode:
Diffstat (limited to 'board/nx823')
-rw-r--r--board/nx823/nx823.c485
1 files changed, 485 insertions, 0 deletions
diff --git a/board/nx823/nx823.c b/board/nx823/nx823.c
new file mode 100644
index 00000000000..35cc9b07f1b
--- /dev/null
+++ b/board/nx823/nx823.c
@@ -0,0 +1,485 @@
+/*
+ * (C) Copyright 2001
+ * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
+ *
+ * (C) Copyright 2001-2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <mpc8xx.h>
+
+/* ------------------------------------------------------------------------- */
+
+static long int dram_size (long int, long int *, long int);
+
+/* ------------------------------------------------------------------------- */
+
+#define _NOT_USED_ 0xFFFFFFFF
+
+const uint sdram_table[] =
+{
+#if (MPC8XX_SPEED <= 50000000L)
+ /*
+ * Single Read. (Offset 0 in UPMA RAM)
+ */
+ 0x0F07EC04,
+ 0x01BBD804,
+ 0x1FF7F440,
+ 0xFFFFFC07,
+ 0xFFFFFFFF,
+
+ /*
+ * SDRAM Initialization (offset 5 in UPMA RAM)
+ *
+ * This is no UPM entry point. The following definition uses
+ * the remaining space to establish an initialization
+ * sequence, which is executed by a RUN command.
+ *
+ */
+ 0x1FE7F434,
+ 0xEFABE834,
+ 0x1FA7D435,
+
+ /*
+ * Burst Read. (Offset 8 in UPMA RAM)
+ */
+ 0x0F07EC04,
+ 0x10EFDC04,
+ 0xF0AFFC00,
+ 0xF0AFFC00,
+ 0xF1AFFC00,
+ 0xFFAFFC40,
+ 0xFFAFFC07,
+ 0xFFFFFFFF,
+ 0xFFFFFFFF,
+ 0xFFFFFFFF,
+ 0xFFFFFFFF,
+ 0xFFFFFFFF,
+ 0xFFFFFFFF,
+ 0xFFFFFFFF,
+ 0xFFFFFFFF,
+ 0xFFFFFFFF,
+
+ /*
+ * Single Write. (Offset 18 in UPMA RAM)
+ */
+ 0x0E07E804,
+ 0x01BBD000,
+ 0x1FF7F447,
+ 0xFFFFFFFF,
+ 0xFFFFFFFF,
+ 0xFFFFFFFF,
+ 0xFFFFFFFF,
+ 0xFFFFFFFF,
+
+ /*
+ * Burst Write. (Offset 20 in UPMA RAM)
+ */
+ 0x0E07E800,
+ 0x10EFD400,
+ 0xF0AFFC00,
+ 0xF0AFFC00,
+ 0xF1AFFC47,
+ 0xFFFFFFFF,
+ 0xFFFFFFFF,
+ 0xFFFFFFFF,
+ 0xFFFFFFFF,
+ 0xFFFFFFFF,
+ 0xFFFFFFFF,
+ 0xFFFFFFFF,
+ 0xFFFFFFFF,
+ 0xFFFFFFFF,
+ 0xFFFFFFFF,
+ 0xFFFFFFFF,
+
+ /*
+ * Refresh (Offset 30 in UPMA RAM)
+ */
+ 0x1FF7DC84,
+ 0xFFFFFC04,
+ 0xFFFFFC84,
+ 0xFFFFFC07,
+ 0xFFFFFFFF,
+ 0xFFFFFFFF,
+ 0xFFFFFFFF,
+ 0xFFFFFFFF,
+ 0xFFFFFFFF,
+ 0xFFFFFFFF,
+ 0xFFFFFFFF,
+ 0xFFFFFFFF,
+
+ /*
+ * Exception. (Offset 3c in UPMA RAM)
+ */
+ 0x7FFFFC07,
+ 0xFFFFFFFF,
+ 0xFFFFFFFF,
+ 0xFFFFFFFF
+
+#else
+
+ /*
+ * Single Read. (Offset 0 in UPMA RAM)
+ */
+ 0x1F07FC04,
+ 0xEEAFEC04,
+ 0x11AFDC04,
+ 0xEFBBF800,
+ 0x1FF7F447,
+
+ /*
+ * SDRAM Initialization (offset 5 in UPMA RAM)
+ *
+ * This is no UPM entry point. The following definition uses
+ * the remaining space to establish an initialization
+ * sequence, which is executed by a RUN command.
+ *
+ */
+ 0x1FF7F434,
+ 0xEFEBE834,
+ 0x1FB7D435,
+
+ /*
+ * Burst Read. (Offset 8 in UPMA RAM)
+ */
+ 0x1F07FC04,
+ 0xEEAFEC04,
+ 0x10AFDC04,
+ 0xF0AFFC00,
+ 0xF0AFFC00,
+ 0xF1AFFC00,
+ 0xEFBBF800,
+ 0x1FF7F447,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+
+ /*
+ * Single Write. (Offset 18 in UPMA RAM)
+ */
+ 0x1F07FC04,
+ 0xEEAFE800,
+ 0x01BBD004,
+ 0x1FF7F447,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+
+ /*
+ * Burst Write. (Offset 20 in UPMA RAM)
+ */
+ 0x1F07FC04,
+ 0xEEAFE800,
+ 0x10AFD400,
+ 0xF0AFFC00,
+ 0xF0AFFC00,
+ 0xE1BBF804,
+ 0x1FF7F447,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+
+ /*
+ * Refresh (Offset 30 in UPMA RAM)
+ */
+ 0x1FF7DC84,
+ 0xFFFFFC04,
+ 0xFFFFFC04,
+ 0xFFFFFC04,
+ 0xFFFFFC84,
+ 0xFFFFFC07,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_,
+
+ /*
+ * Exception. (Offset 3c in UPMA RAM)
+ */
+ 0x7FFFFC07, /* last */
+ _NOT_USED_, _NOT_USED_, _NOT_USED_,
+#endif
+};
+
+/* ------------------------------------------------------------------------- */
+
+
+/*
+ * Check Board Identity:
+ *
+ */
+
+int checkboard (void)
+{
+ printf ("Board: Nexus NX823");
+ return (0);
+}
+
+/* ------------------------------------------------------------------------- */
+
+long int initdram (int board_type)
+{
+ volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile memctl8xx_t *memctl = &immap->im_memctl;
+ long int size_b0, size_b1, size8, size9;
+
+ upmconfig(UPMA, (uint *)sdram_table, sizeof(sdram_table)/sizeof(uint));
+
+ /*
+ * Up to 2 Banks of 64Mbit x 2 devices
+ * Initial builds only have 1
+ */
+ memctl->memc_mptpr = CFG_MPTPR_1BK_4K;
+ memctl->memc_mar = 0x00000088;
+
+ /*
+ * Map controller SDRAM bank 0
+ */
+ memctl->memc_or1 = CFG_OR1_PRELIM;
+ memctl->memc_br1 = CFG_BR1_PRELIM;
+ memctl->memc_mamr = CFG_MAMR_8COL & (~(MAMR_PTAE)); /* no refresh yet */
+ udelay(200);
+
+ /*
+ * Map controller SDRAM bank 1
+ */
+ memctl->memc_or2 = CFG_OR2_PRELIM;
+ memctl->memc_br2 = CFG_BR2_PRELIM;
+
+ /*
+ * Perform SDRAM initializsation sequence
+ */
+ memctl->memc_mcr = 0x80002105; /* SDRAM bank 0 */
+ udelay(1);
+ memctl->memc_mcr = 0x80002230; /* SDRAM bank 0 - execute twice */
+ udelay(1);
+
+ memctl->memc_mcr = 0x80004105; /* SDRAM bank 1 */
+ udelay(1);
+ memctl->memc_mcr = 0x80004230; /* SDRAM bank 1 - execute twice */
+ udelay(1);
+
+ memctl->memc_mamr |= MAMR_PTAE; /* enable refresh */
+ udelay (1000);
+
+ /*
+ * Preliminary prescaler for refresh (depends on number of
+ * banks): This value is selected for four cycles every 62.4 us
+ * with two SDRAM banks or four cycles every 31.2 us with one
+ * bank. It will be adjusted after memory sizing.
+ */
+ memctl->memc_mptpr = CFG_MPTPR_2BK_8K;
+
+ memctl->memc_mar = 0x00000088;
+
+
+ /*
+ * Check Bank 0 Memory Size for re-configuration
+ *
+ * try 8 column mode
+ */
+ size8 = dram_size (CFG_MAMR_8COL, (ulong *)SDRAM_BASE1_PRELIM, SDRAM_MAX_SIZE);
+
+ udelay (1000);
+
+ /*
+ * try 9 column mode
+ */
+ size9 = dram_size (CFG_MAMR_9COL, (ulong *)SDRAM_BASE1_PRELIM, SDRAM_MAX_SIZE);
+
+ if (size8 < size9) { /* leave configuration at 9 columns */
+ size_b0 = size9;
+/* debug ("SDRAM Bank 0 in 9 column mode: %ld MB\n", size >> 20); */
+ } else { /* back to 8 columns */
+ size_b0 = size8;
+ memctl->memc_mamr = CFG_MAMR_8COL;
+ udelay(500);
+/* debug ("SDRAM Bank 0 in 8 column mode: %ld MB\n", size >> 20); */
+ }
+
+ /*
+ * Check Bank 1 Memory Size
+ * use current column settings
+ * [9 column SDRAM may also be used in 8 column mode,
+ * but then only half the real size will be used.]
+ */
+ size_b1 = dram_size (memctl->memc_mamr, (ulong *)SDRAM_BASE2_PRELIM,
+ SDRAM_MAX_SIZE);
+/* debug ("SDRAM Bank 1: %ld MB\n", size8 >> 20); */
+
+ udelay (1000);
+
+ /*
+ * Adjust refresh rate depending on SDRAM type, both banks
+ * For types > 128 MBit leave it at the current (fast) rate
+ */
+ if ((size_b0 < 0x02000000) && (size_b1 < 0x02000000)) {
+ /* reduce to 15.6 us (62.4 us / quad) */
+ memctl->memc_mptpr = CFG_MPTPR_2BK_4K;
+ udelay(1000);
+ }
+
+ /*
+ * Final mapping: map bigger bank first
+ */
+ if (size_b1 > size_b0) { /* SDRAM Bank 1 is bigger - map first */
+
+ memctl->memc_or2 = ((-size_b1) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
+ memctl->memc_br2 = (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
+
+ if (size_b0 > 0) {
+ /*
+ * Position Bank 0 immediately above Bank 1
+ */
+ memctl->memc_or1 = ((-size_b0) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
+ memctl->memc_br1 = ((CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V)
+ + size_b1;
+ } else {
+ unsigned long reg;
+ /*
+ * No bank 0
+ *
+ * invalidate bank
+ */
+ memctl->memc_br1 = 0;
+
+ /* adjust refresh rate depending on SDRAM type, one bank */
+ reg = memctl->memc_mptpr;
+ reg >>= 1; /* reduce to CFG_MPTPR_1BK_8K / _4K */
+ memctl->memc_mptpr = reg;
+ }
+
+ } else { /* SDRAM Bank 0 is bigger - map first */
+
+ memctl->memc_or1 = ((-size_b0) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
+ memctl->memc_br1 = (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
+
+ if (size_b1 > 0) {
+ /*
+ * Position Bank 1 immediately above Bank 0
+ */
+ memctl->memc_or2 = ((-size_b1) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
+ memctl->memc_br2 = ((CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V)
+ + size_b0;
+ } else {
+ unsigned long reg;
+ /*
+ * No bank 1
+ *
+ * invalidate bank
+ */
+ memctl->memc_br2 = 0;
+
+ /* adjust refresh rate depending on SDRAM type, one bank */
+ reg = memctl->memc_mptpr;
+ reg >>= 1; /* reduce to CFG_MPTPR_1BK_8K / _4K */
+ memctl->memc_mptpr = reg;
+ }
+ }
+
+ udelay(10000);
+
+ return (size_b0 + size_b1);
+}
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * Check memory range for valid RAM. A simple memory test determines
+ * the actually available RAM size between addresses `base' and
+ * `base + maxsize'. Some (not all) hardware errors are detected:
+ * - short between address lines
+ * - short between data lines
+ */
+
+static long int dram_size (long int mamr_value, long int *base, long int maxsize)
+{
+ volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile memctl8xx_t *memctl = &immap->im_memctl;
+ volatile long int *addr;
+ long int cnt, val;
+
+ memctl->memc_mamr = mamr_value;
+
+ for (cnt = maxsize/sizeof(long); cnt > 0; cnt >>= 1) {
+ addr = base + cnt; /* pointer arith! */
+
+ *addr = ~cnt;
+ }
+
+ /* write 0 to base address */
+ addr = base;
+ *addr = 0;
+
+ /* check at base address */
+ if ((val = *addr) != 0) {
+ return (0);
+ }
+
+ for (cnt = 1; ; cnt <<= 1) {
+ addr = base + cnt; /* pointer arith! */
+
+ val = *addr;
+
+ if (val != (~cnt)) {
+ return (cnt * sizeof(long));
+ }
+ }
+ /* NOTREACHED */
+}
+
+u_long *my_sernum;
+
+int misc_init_r (void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ char tmp[50];
+ u_char *e = gd->bd->bi_enetaddr;
+
+ /* save serial numbre from flash (uniquely programmed) */
+ my_sernum = malloc(8);
+ memcpy(my_sernum,gd->bd->bi_sernum,8);
+
+ /* save env variables according to sernum */
+ sprintf(tmp,"%08lx%08lx",my_sernum[0],my_sernum[1]);
+ setenv("serial#",tmp);
+
+ sprintf(tmp,"%02x:%02x:%02x:%02x:%02x:%02x"
+ ,e[0],e[1],e[2],e[3],e[4],e[5]);
+ setenv("ethaddr",tmp);
+ return (0);
+}
+
+void load_sernum_ethaddr (void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ int i;
+ bd_t * bd = gd->bd;
+
+ for (i = 0; i < 8; i++) {
+ bd->bi_sernum[i] = *(u_char *) (CFG_FLASH_SN_BASE + i);
+ }
+ bd->bi_enetaddr[0] = 0x10;
+ bd->bi_enetaddr[1] = 0x20;
+ bd->bi_enetaddr[2] = 0x30;
+ bd->bi_enetaddr[3] = bd->bi_sernum[1] << 4 | bd->bi_sernum[2];
+ bd->bi_enetaddr[4] = bd->bi_sernum[5];
+ bd->bi_enetaddr[5] = bd->bi_sernum[6];
+}
+