summaryrefslogtreecommitdiff
path: root/board/nx823/nx823.c
diff options
context:
space:
mode:
Diffstat (limited to 'board/nx823/nx823.c')
-rw-r--r--board/nx823/nx823.c48
1 files changed, 24 insertions, 24 deletions
diff --git a/board/nx823/nx823.c b/board/nx823/nx823.c
index 18840ff48f2..df9aaab7a7a 100644
--- a/board/nx823/nx823.c
+++ b/board/nx823/nx823.c
@@ -159,7 +159,7 @@ int checkboard (void)
phys_size_t initdram (int board_type)
{
- volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
volatile memctl8xx_t *memctl = &immap->im_memctl;
long int size_b0, size_b1, size8, size9;
@@ -170,22 +170,22 @@ phys_size_t initdram (int board_type)
* Up to 2 Banks of 64Mbit x 2 devices
* Initial builds only have 1
*/
- memctl->memc_mptpr = CFG_MPTPR_1BK_4K;
+ memctl->memc_mptpr = CONFIG_SYS_MPTPR_1BK_4K;
memctl->memc_mar = 0x00000088;
/*
* Map controller SDRAM bank 0
*/
- memctl->memc_or1 = CFG_OR1_PRELIM;
- memctl->memc_br1 = CFG_BR1_PRELIM;
- memctl->memc_mamr = CFG_MAMR_8COL & (~(MAMR_PTAE)); /* no refresh yet */
+ memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM;
+ memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM;
+ memctl->memc_mamr = CONFIG_SYS_MAMR_8COL & (~(MAMR_PTAE)); /* no refresh yet */
udelay (200);
/*
* Map controller SDRAM bank 1
*/
- memctl->memc_or2 = CFG_OR2_PRELIM;
- memctl->memc_br2 = CFG_BR2_PRELIM;
+ memctl->memc_or2 = CONFIG_SYS_OR2_PRELIM;
+ memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM;
/*
* Perform SDRAM initializsation sequence
@@ -209,7 +209,7 @@ phys_size_t initdram (int board_type)
* with two SDRAM banks or four cycles every 31.2 us with one
* bank. It will be adjusted after memory sizing.
*/
- memctl->memc_mptpr = CFG_MPTPR_2BK_8K;
+ memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_8K;
memctl->memc_mar = 0x00000088;
@@ -219,7 +219,7 @@ phys_size_t initdram (int board_type)
*
* try 8 column mode
*/
- size8 = dram_size (CFG_MAMR_8COL, (long *) SDRAM_BASE1_PRELIM,
+ size8 = dram_size (CONFIG_SYS_MAMR_8COL, (long *) SDRAM_BASE1_PRELIM,
SDRAM_MAX_SIZE);
udelay (1000);
@@ -227,7 +227,7 @@ phys_size_t initdram (int board_type)
/*
* try 9 column mode
*/
- size9 = dram_size (CFG_MAMR_9COL, (long *) SDRAM_BASE1_PRELIM,
+ size9 = dram_size (CONFIG_SYS_MAMR_9COL, (long *) SDRAM_BASE1_PRELIM,
SDRAM_MAX_SIZE);
if (size8 < size9) { /* leave configuration at 9 columns */
@@ -235,7 +235,7 @@ phys_size_t initdram (int board_type)
/* debug ("SDRAM Bank 0 in 9 column mode: %ld MB\n", size >> 20); */
} else { /* back to 8 columns */
size_b0 = size8;
- memctl->memc_mamr = CFG_MAMR_8COL;
+ memctl->memc_mamr = CONFIG_SYS_MAMR_8COL;
udelay (500);
/* debug ("SDRAM Bank 0 in 8 column mode: %ld MB\n", size >> 20); */
}
@@ -258,7 +258,7 @@ phys_size_t initdram (int board_type)
*/
if ((size_b0 < 0x02000000) && (size_b1 < 0x02000000)) {
/* reduce to 15.6 us (62.4 us / quad) */
- memctl->memc_mptpr = CFG_MPTPR_2BK_4K;
+ memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_4K;
udelay (1000);
}
@@ -268,9 +268,9 @@ phys_size_t initdram (int board_type)
if (size_b1 > size_b0) { /* SDRAM Bank 1 is bigger - map first */
memctl->memc_or2 =
- ((-size_b1) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
+ ((-size_b1) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM;
memctl->memc_br2 =
- (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
+ (CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
if (size_b0 > 0) {
/*
@@ -278,9 +278,9 @@ phys_size_t initdram (int board_type)
*/
memctl->memc_or1 =
((-size_b0) & 0xFFFF0000) |
- CFG_OR_TIMING_SDRAM;
+ CONFIG_SYS_OR_TIMING_SDRAM;
memctl->memc_br1 =
- ((CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA |
+ ((CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA |
BR_V)
+ size_b1;
} else {
@@ -295,16 +295,16 @@ phys_size_t initdram (int board_type)
/* adjust refresh rate depending on SDRAM type, one bank */
reg = memctl->memc_mptpr;
- reg >>= 1; /* reduce to CFG_MPTPR_1BK_8K / _4K */
+ reg >>= 1; /* reduce to CONFIG_SYS_MPTPR_1BK_8K / _4K */
memctl->memc_mptpr = reg;
}
} else { /* SDRAM Bank 0 is bigger - map first */
memctl->memc_or1 =
- ((-size_b0) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
+ ((-size_b0) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM;
memctl->memc_br1 =
- (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
+ (CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
if (size_b1 > 0) {
/*
@@ -312,9 +312,9 @@ phys_size_t initdram (int board_type)
*/
memctl->memc_or2 =
((-size_b1) & 0xFFFF0000) |
- CFG_OR_TIMING_SDRAM;
+ CONFIG_SYS_OR_TIMING_SDRAM;
memctl->memc_br2 =
- ((CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA |
+ ((CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA |
BR_V)
+ size_b0;
} else {
@@ -329,7 +329,7 @@ phys_size_t initdram (int board_type)
/* adjust refresh rate depending on SDRAM type, one bank */
reg = memctl->memc_mptpr;
- reg >>= 1; /* reduce to CFG_MPTPR_1BK_8K / _4K */
+ reg >>= 1; /* reduce to CONFIG_SYS_MPTPR_1BK_8K / _4K */
memctl->memc_mptpr = reg;
}
}
@@ -352,7 +352,7 @@ phys_size_t initdram (int board_type)
static long int dram_size (long int mamr_value, long int *base,
long int maxsize)
{
- volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
volatile memctl8xx_t *memctl = &immap->im_memctl;
memctl->memc_mamr = mamr_value;
@@ -387,7 +387,7 @@ void load_sernum_ethaddr (void)
bd_t *bd = gd->bd;
for (i = 0; i < 8; i++) {
- bd->bi_sernum[i] = *(u_char *) (CFG_FLASH_SN_BASE + i);
+ bd->bi_sernum[i] = *(u_char *) (CONFIG_SYS_FLASH_SN_BASE + i);
}
bd->bi_enetaddr[0] = 0x10;
bd->bi_enetaddr[1] = 0x20;