summaryrefslogtreecommitdiff
path: root/board/ns9750dev/platform.S
diff options
context:
space:
mode:
Diffstat (limited to 'board/ns9750dev/platform.S')
-rw-r--r--board/ns9750dev/platform.S298
1 files changed, 298 insertions, 0 deletions
diff --git a/board/ns9750dev/platform.S b/board/ns9750dev/platform.S
new file mode 100644
index 00000000000..11f9aef8011
--- /dev/null
+++ b/board/ns9750dev/platform.S
@@ -0,0 +1,298 @@
+/*
+ * Board specific setup info
+ *
+ * (C) Copyright 2003
+ * Texas Instruments, <www.ti.com>
+ * Kshitij Gupta <Kshitij@ti.com>
+ *
+ * Modified for the NS9750 DevBoard by
+ * (C) Copyright 2004 by FS Forth-Systeme GmbH.
+ * Markus Pietrek <mpietrek@fsforth.de>
+ * @References: [1] NS9750 Hardware Reference/December 2003
+ * [2] ns9750_a.cmd from MAJIC configuration
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+
+#if defined(CONFIG_NS9750DEV)
+# ifdef CONFIG_INIT_CRITICAL
+# include <./ns9750_sys.h>
+# include <./ns9750_mem.h>
+# endif
+#endif
+
+/***********************************************************************
+ * @Function: write_register_block
+ * @Return: nothing
+ * @Descr: Copies the register block of register_offset:register value to
+ * the registers at base r0. The block is assumed to start in RAM at r1
+ * and end at r2. The linked RAM base address of U-Boot is assumed to be
+ * in r5 while the ROM base address we are running from is r6
+ * Uses r3 and r4 as tempory registers
+ ***********************************************************************/
+
+.macro write_register_block
+ @@ map the addresses to high memory
+ sub r1, r1, r5
+ add r1, r1, r6
+ sub r2, r2, r5
+ add r2, r2, r6
+
+ @@ copy all
+1:
+ @@ Write register/value pair starting at [r1] to register base r0
+ ldr r3, [r1], #4
+ ldr r4, [r1], #4
+ str r4, [r0,r3]
+ cmp r1, r2
+ blt 1b
+.endm
+
+_TEXT_BASE:
+ .word TEXT_BASE @ sdram load addr from config.mk
+_PHYS_FLASH:
+ .word PHYS_FLASH_1 @ real flash address (without mirroring)
+_CAS_LATENCY:
+ .word 0x00022000 @ for CAS2 latency
+
+#ifdef CONFIG_INIT_CRITICAL
+.globl platformsetup
+platformsetup:
+
+ /* U-Boot may be linked to RAM at 0x780000. But this code will run in
+ flash from 0x0. But in order to enable RAM we have to disable the
+ mirror bit, therefore we have to jump to our real flash address
+ beginning at PHYS_FLASH_1 (CS4 Base). Therefore,
+ _run_at_real_flash_address may be 0x500003b0 while be linked to
+ 0x7803b0. So we must modify our linked addresses */
+
+ @@ branch to high memory address, away from 0x0
+ ldr r5, _TEXT_BASE
+ ldr r6, _PHYS_FLASH
+ ldr r0, =_run_at_real_flash_address
+ sub r0, r0, r5
+ add r0, r0, r6
+ mov pc, r0
+ nop @ for pipelining
+
+_run_at_real_flash_address:
+ @@ now we are running > PHYS_FLASH_1, safe to enable memory controller
+
+ @@ Write Memory Configuration Registers
+
+ ldr r0, _NS9750_MEM_MODULE_BASE
+ ldr r1, =_MEM_CONFIG_START
+ ldr r2, =_MEM_CONFIG_END
+
+ write_register_block
+
+ @@ Give SDRAM some time to settle
+ @@ @TODO. According to [2] it should be 2 AHB cycles. Check
+
+ ldr r1, =0x50
+_sdram_settle:
+ subs r1, r1, #1
+ bne _sdram_settle
+
+_enable_mappings:
+ @@ Enable SDRAM Mode
+
+ ldr r1, =_MEM_MODE_START
+ ldr r2, =_MEM_MODE_END
+
+ write_register_block
+
+ ldr r3, _CAS_LATENCY @ perform one read from SDRAM
+ ldr r3, [r3]
+
+ @@ Enable SDRAM and memory mappings
+
+ ldr r1, =_MEM_ENABLE_START
+ ldr r2, =_MEM_ENABLE_END
+
+ write_register_block
+
+ @@ Activate AHB monitor
+
+ ldr r0, =NS9750_SYS_MODULE_BASE
+ ldr r1, =_AHB_MONITOR_START
+ ldr r2, =_AHB_MONITOR_END
+
+ write_register_block
+_relocate_lr:
+ /* lr and ip (from cpu_init_crit) are still based on 0x0, relocate it to
+ PHYS_FLASH. */
+ mov r1, ip
+ add r1, r1, r6
+ mov ip, r1
+
+ mov r1, lr
+ add r1, r1, r6
+ mov lr, r1
+
+ @@ back to arch calling code
+ mov pc, lr
+
+ .ltorg
+
+_NS9750_MEM_MODULE_BASE:
+ .word NS9750_MEM_MODULE_BASE
+
+_MEM_CONFIG_START:
+ /* Table of 2 32bit entries. First word is register address offset
+ relative to NS9750_MEM_MODULE_BASE, second one is value. They are
+ written in order of appearance */
+
+ @@ Register values taken from [2]
+ .word NS9750_MEM_CTRL
+ .word NS9750_MEM_CTRL_E
+
+ .word NS9750_MEM_DYN_REFRESH
+ .word (0x6 & NS9750_MEM_DYN_REFRESH_MA)
+
+ .word NS9750_MEM_DYN_READ_CFG
+ .word (0x1 & NS9750_MEM_DYN_READ_CFG_MA)
+
+ .word NS9750_MEM_DYN_TRP
+ .word (0x1 & NS9750_MEM_DYN_TRP_MA)
+
+ .word NS9750_MEM_DYN_TRAS
+ .word (0x4 & NS9750_MEM_DYN_TRAS_MA)
+
+ .word NS9750_MEM_DYN_TAPR
+ .word (0x1 & NS9750_MEM_DYN_TRAS_MA)
+
+ .word NS9750_MEM_DYN_TDAL
+ .word (0x5 & NS9750_MEM_DYN_TDAL_MA)
+
+ .word NS9750_MEM_DYN_TWR
+ .word (0x1 & NS9750_MEM_DYN_TWR_MA)
+
+ .word NS9750_MEM_DYN_TRC
+ .word (0x6 & NS9750_MEM_DYN_TRC_MA)
+
+ .word NS9750_MEM_DYN_TRFC
+ .word (0x6 & NS9750_MEM_DYN_TRFC_MA)
+
+ .word NS9750_MEM_DYN_TRRD
+ .word (0x1 & NS9750_MEM_DYN_TRRD_MA)
+
+ .word NS9750_MEM_DYN_TMRD
+ .word (0x1 & NS9750_MEM_DYN_TMRD_MA)
+
+ @@ CS 4
+ .word NS9750_MEM_DYN_CFG(0)
+ .word (NS9750_MEM_DYN_CFG_AM | \
+ (0x280 & NS9750_MEM_DYN_CFG_AM_MA))
+
+ .word NS9750_MEM_DYN_RAS_CAS(0)
+ .word ((0x200 & NS9750_MEM_DYN_RAS_CAS_CAS_MA) | \
+ (0x03 & NS9750_MEM_DYN_RAS_CAS_RAS_MA))
+
+ @@ CS 5
+ .word NS9750_MEM_DYN_CFG(1)
+ .word (NS9750_MEM_DYN_CFG_AM | \
+ (0x280 & NS9750_MEM_DYN_CFG_AM_MA))
+
+ .word NS9750_MEM_DYN_RAS_CAS(1)
+ .word ((0x200 & NS9750_MEM_DYN_RAS_CAS_CAS_MA) | \
+ (0x03 & NS9750_MEM_DYN_RAS_CAS_RAS_MA))
+
+ @@ CS 6
+ .word NS9750_MEM_DYN_CFG(2)
+ .word (NS9750_MEM_DYN_CFG_AM | \
+ (0x280 & NS9750_MEM_DYN_CFG_AM_MA))
+
+ .word NS9750_MEM_DYN_RAS_CAS(2)
+ .word ((0x200 & NS9750_MEM_DYN_RAS_CAS_CAS_MA) | \
+ (0x03 & NS9750_MEM_DYN_RAS_CAS_RAS_MA))
+
+ @@ CS 7
+ .word NS9750_MEM_DYN_CFG(3)
+ .word (NS9750_MEM_DYN_CFG_AM | \
+ (0x280 & NS9750_MEM_DYN_CFG_AM_MA))
+
+ .word NS9750_MEM_DYN_RAS_CAS(3)
+ .word ((0x200 & NS9750_MEM_DYN_RAS_CAS_CAS_MA) | \
+ (0x03 & NS9750_MEM_DYN_RAS_CAS_RAS_MA))
+
+ .word NS9750_MEM_DYN_CTRL
+ .word (NS9750_MEM_DYN_CTRL_I_PALL | \
+ NS9750_MEM_DYN_CTRL_SR | \
+ NS9750_MEM_DYN_CTRL_CE )
+
+ .word NS9750_MEM_DYN_REFRESH
+ .word (0x1 & NS9750_MEM_DYN_REFRESH_MA)
+ @@ No further register settings after refresh
+_MEM_CONFIG_END:
+
+_MEM_MODE_START:
+ .word NS9750_MEM_DYN_REFRESH
+ .word (0x30 & NS9750_MEM_DYN_REFRESH_MA)
+
+ .word NS9750_MEM_DYN_CTRL
+ .word (NS9750_MEM_DYN_CTRL_I_MODE | \
+ NS9750_MEM_DYN_CTRL_SR | \
+ NS9750_MEM_DYN_CTRL_CE )
+_MEM_MODE_END:
+
+_MEM_ENABLE_START:
+ .word NS9750_MEM_DYN_CTRL
+ .word (NS9750_MEM_DYN_CTRL_I_NORMAL | \
+ NS9750_MEM_DYN_CTRL_SR | \
+ NS9750_MEM_DYN_CTRL_CE )
+
+ @@ CS 4
+ .word NS9750_MEM_DYN_CFG(0)
+ .word (NS9750_MEM_DYN_CFG_BDMC | \
+ NS9750_MEM_DYN_CFG_AM | \
+ (0x280 & NS9750_MEM_DYN_CFG_AM_MA))
+
+ @@ CS 5
+ .word NS9750_MEM_DYN_CFG(1)
+ .word (NS9750_MEM_DYN_CFG_BDMC | \
+ NS9750_MEM_DYN_CFG_AM | \
+ (0x280 & NS9750_MEM_DYN_CFG_AM_MA))
+
+ @@ CS 6
+ .word NS9750_MEM_DYN_CFG(2)
+ .word (NS9750_MEM_DYN_CFG_BDMC | \
+ NS9750_MEM_DYN_CFG_AM | \
+ (0x280 & NS9750_MEM_DYN_CFG_AM_MA))
+
+ @@ CS 7
+ .word NS9750_MEM_DYN_CFG(3)
+ .word (NS9750_MEM_DYN_CFG_BDMC | \
+ NS9750_MEM_DYN_CFG_AM | \
+ (0x280 & NS9750_MEM_DYN_CFG_AM_MA))
+_MEM_ENABLE_END:
+
+_AHB_MONITOR_START:
+ .word NS9750_SYS_AHB_TIMEOUT
+ .word 0x01000100 @ @TODO not calculated yet
+
+ .word NS9750_SYS_AHB_MON
+ .word (NS9750_SYS_AHB_MON_BMTC_GEN_IRQ | \
+ NS9750_SYS_AHB_MON_BATC_GEN_IRQ)
+_AHB_MONITOR_END:
+
+#endif /* CONFIG_INIT_CRITICAL */