summaryrefslogtreecommitdiff
path: root/board/ixdp425
diff options
context:
space:
mode:
Diffstat (limited to 'board/ixdp425')
-rw-r--r--board/ixdp425/flash.c18
-rw-r--r--board/ixdp425/ixdp425.c20
2 files changed, 19 insertions, 19 deletions
diff --git a/board/ixdp425/flash.c b/board/ixdp425/flash.c
index 0bae9e09ee8..f1d9190eac4 100644
--- a/board/ixdp425/flash.c
+++ b/board/ixdp425/flash.c
@@ -28,7 +28,7 @@
#include <linux/byteorder/swab.h>
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
/* Board support for 1 or 2 flash devices */
#undef FLASH_PORT_WIDTH32
@@ -65,7 +65,7 @@ unsigned long flash_init (void)
int i;
ulong size = 0;
- for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+ for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
switch (i) {
case 0:
flash_get_size ((FPW *) PHYS_FLASH_1, &flash_info[i]);
@@ -81,8 +81,8 @@ unsigned long flash_init (void)
/* Protect monitor and environment sectors
*/
flash_protect (FLAG_PROTECT_SET,
- CFG_FLASH_BASE,
- CFG_FLASH_BASE + _bss_start - _armboot_start,
+ CONFIG_SYS_FLASH_BASE,
+ CONFIG_SYS_FLASH_BASE + _bss_start - _armboot_start,
&flash_info[0]);
flash_protect (FLAG_PROTECT_SET,
@@ -198,10 +198,10 @@ static ulong flash_get_size (FPW * addr, flash_info_t * info)
break;
}
- if (info->sector_count > CFG_MAX_FLASH_SECT) {
+ if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
printf ("** ERROR: sector count %d > max (%d) **\n",
- info->sector_count, CFG_MAX_FLASH_SECT);
- info->sector_count = CFG_MAX_FLASH_SECT;
+ info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
+ info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
}
addr[0] = (FPW) 0x00FF00FF; /* restore read mode */
@@ -270,7 +270,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
*addr) & (FPW) 0x00800080) !=
(FPW) 0x00800080) {
if (get_timer_masked () >
- CFG_FLASH_ERASE_TOUT) {
+ CONFIG_SYS_FLASH_ERASE_TOUT) {
printf ("Timeout\n");
*addr = (FPW) 0x00B000B0; /* suspend erase */
*addr = (FPW) 0x00FF00FF; /* reset to read mode */
@@ -406,7 +406,7 @@ static int write_data (flash_info_t * info, ulong dest, FPW data)
/* wait while polling the status register */
while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
- if (get_timer_masked () > CFG_FLASH_WRITE_TOUT) {
+ if (get_timer_masked () > CONFIG_SYS_FLASH_WRITE_TOUT) {
*addr = (FPW) 0x00FF00FF; /* restore read mode */
return (1);
}
diff --git a/board/ixdp425/ixdp425.c b/board/ixdp425/ixdp425.c
index b379c7535f0..43ac8f6a42a 100644
--- a/board/ixdp425/ixdp425.c
+++ b/board/ixdp425/ixdp425.c
@@ -54,25 +54,25 @@ int board_init (void)
/*
* Get realtek RTL8305 switch and SLIC out of reset
*/
- GPIO_OUTPUT_SET(CFG_GPIO_SWITCH_RESET_N);
- GPIO_OUTPUT_ENABLE(CFG_GPIO_SWITCH_RESET_N);
- GPIO_OUTPUT_SET(CFG_GPIO_SLIC_RESET_N);
- GPIO_OUTPUT_ENABLE(CFG_GPIO_SLIC_RESET_N);
+ GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_SWITCH_RESET_N);
+ GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_SWITCH_RESET_N);
+ GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_SLIC_RESET_N);
+ GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_SLIC_RESET_N);
/*
* Setup GPIO's for PCI INTA & INTB
*/
- GPIO_OUTPUT_DISABLE(CFG_GPIO_PCI_INTA_N);
- GPIO_INT_ACT_LOW_SET(CFG_GPIO_PCI_INTA_N);
- GPIO_OUTPUT_DISABLE(CFG_GPIO_PCI_INTB_N);
- GPIO_INT_ACT_LOW_SET(CFG_GPIO_PCI_INTB_N);
+ GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_PCI_INTA_N);
+ GPIO_INT_ACT_LOW_SET(CONFIG_SYS_GPIO_PCI_INTA_N);
+ GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_PCI_INTB_N);
+ GPIO_INT_ACT_LOW_SET(CONFIG_SYS_GPIO_PCI_INTB_N);
/*
* Setup GPIO's for 33MHz clock output
*/
*IXP425_GPIO_GPCLKR = 0x01FF01FF;
- GPIO_OUTPUT_ENABLE(CFG_GPIO_PCI_CLK);
- GPIO_OUTPUT_ENABLE(CFG_GPIO_EXTBUS_CLK);
+ GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_PCI_CLK);
+ GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_EXTBUS_CLK);
#endif
return 0;