diff options
Diffstat (limited to 'board/ivm')
-rw-r--r-- | board/ivm/ivm.c | 300 |
1 files changed, 135 insertions, 165 deletions
diff --git a/board/ivm/ivm.c b/board/ivm/ivm.c index 131ab0201de..cb661c9d28d 100644 --- a/board/ivm/ivm.c +++ b/board/ivm/ivm.c @@ -41,14 +41,13 @@ static long int dram_size (long int, long int *, long int); /* * 50 MHz SHARC access using UPM A */ -const uint sharc_table[] = -{ +const uint sharc_table[] = { /* * Single Read. (Offset 0 in UPM RAM) */ 0x0FF3FC04, 0x0FF3EC00, 0x7FFFEC04, 0xFFFFEC04, - 0xFFFFEC05, /* last */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, + 0xFFFFEC05, /* last */ + _NOT_USED_, _NOT_USED_, _NOT_USED_, /* * Burst Read. (Offset 8 in UPM RAM) */ @@ -61,8 +60,8 @@ const uint sharc_table[] = * Single Write. (Offset 18 in UPM RAM) */ 0x0FAFFC04, 0x0FAFEC00, 0x7FFFEC04, 0xFFFFEC04, - 0xFFFFEC05, /* last */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, + 0xFFFFEC05, /* last */ + _NOT_USED_, _NOT_USED_, _NOT_USED_, /* * Burst Write. (Offset 20 in UPM RAM) */ @@ -81,16 +80,15 @@ const uint sharc_table[] = /* * Exception. (Offset 3c in UPM RAM) */ - 0x7FFFFC07, /* last */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, + 0x7FFFFC07, /* last */ + _NOT_USED_, _NOT_USED_, _NOT_USED_, }; /* * 50 MHz SDRAM access using UPM B */ -const uint sdram_table[] = -{ +const uint sdram_table[] = { /* * Single Read. (Offset 0 in UPM RAM) */ @@ -104,40 +102,40 @@ const uint sdram_table[] = * sequence, which is executed by a RUN command. * */ - 0x1FF77C35, 0xEFEABC34, 0x1FB57C35, /* last */ + 0x1FF77C35, 0xEFEABC34, 0x1FB57C35, /* last */ /* * Burst Read. (Offset 8 in UPM RAM) */ 0x0E26FC04, 0x10ADFC04, 0xF0AFFC00, 0xF0AFFC00, - 0xF1AFFC00, 0xEFBBBC00, 0x1FF77C45, /* last */ - _NOT_USED_, + 0xF1AFFC00, 0xEFBBBC00, 0x1FF77C45, /* last */ + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, /* * Single Write. (Offset 18 in UPM RAM) */ - 0x1F27FC04, 0xEEAEBC04, 0x01B93C00, 0x1FF77C45, /* last */ + 0x1F27FC04, 0xEEAEBC04, 0x01B93C00, 0x1FF77C45, /* last */ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, /* * Burst Write. (Offset 20 in UPM RAM) */ 0x0E26BC00, 0x10AD7C00, 0xF0AFFC00, 0xF0AFFC00, - 0xE1BBBC04, 0x1FF77C45, /* last */ - _NOT_USED_, _NOT_USED_, + 0xE1BBBC04, 0x1FF77C45, /* last */ + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, /* * Refresh (Offset 30 in UPM RAM) */ 0x1FF5FC84, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC84, - 0xFFFFFC05, /* last */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, + 0xFFFFFC05, /* last */ + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, /* * Exception. (Offset 3c in UPM RAM) */ - 0x7FFFFC07, /* last */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, + 0x7FFFFC07, /* last */ + _NOT_USED_, _NOT_USED_, _NOT_USED_, }; /* ------------------------------------------------------------------------- */ @@ -161,101 +159,104 @@ int checkboard (void) /* ------------------------------------------------------------------------- */ -long int -initdram (int board_type) +long int initdram (int board_type) { - volatile immap_t *immr = (immap_t *)CFG_IMMR; - volatile memctl8xx_t *memctl = &immr->im_memctl; - long int size_b0; - - /* enable SDRAM clock ("switch on" SDRAM) */ - immr->im_cpm.cp_pbpar &= ~(CFG_PB_SDRAM_CLKE); /* GPIO */ - immr->im_cpm.cp_pbodr &= ~(CFG_PB_SDRAM_CLKE); /* active output */ - immr->im_cpm.cp_pbdir |= CFG_PB_SDRAM_CLKE ; /* output */ - immr->im_cpm.cp_pbdat |= CFG_PB_SDRAM_CLKE ; /* assert SDRAM CLKE */ - udelay(1); - - /* - * Map controller bank 1 for ELIC SACCO - */ - memctl->memc_or1 = CFG_OR1; - memctl->memc_br1 = CFG_BR1; - - /* - * Map controller bank 2 for ELIC EPIC - */ - memctl->memc_or2 = CFG_OR2; - memctl->memc_br2 = CFG_BR2; - - /* - * Configure UPMA for SHARC - */ - upmconfig(UPMA, (uint *)sharc_table, sizeof(sharc_table)/sizeof(uint)); + volatile immap_t *immr = (immap_t *) CFG_IMMR; + volatile memctl8xx_t *memctl = &immr->im_memctl; + long int size_b0; + + /* enable SDRAM clock ("switch on" SDRAM) */ + immr->im_cpm.cp_pbpar &= ~(CFG_PB_SDRAM_CLKE); /* GPIO */ + immr->im_cpm.cp_pbodr &= ~(CFG_PB_SDRAM_CLKE); /* active output */ + immr->im_cpm.cp_pbdir |= CFG_PB_SDRAM_CLKE; /* output */ + immr->im_cpm.cp_pbdat |= CFG_PB_SDRAM_CLKE; /* assert SDRAM CLKE */ + udelay (1); + + /* + * Map controller bank 1 for ELIC SACCO + */ + memctl->memc_or1 = CFG_OR1; + memctl->memc_br1 = CFG_BR1; + + /* + * Map controller bank 2 for ELIC EPIC + */ + memctl->memc_or2 = CFG_OR2; + memctl->memc_br2 = CFG_BR2; + + /* + * Configure UPMA for SHARC + */ + upmconfig (UPMA, (uint *) sharc_table, + sizeof (sharc_table) / sizeof (uint)); #if defined(CONFIG_IVML24) - /* - * Map controller bank 4 for HDLC Address space - */ - memctl->memc_or4 = CFG_OR4; - memctl->memc_br4 = CFG_BR4; + /* + * Map controller bank 4 for HDLC Address space + */ + memctl->memc_or4 = CFG_OR4; + memctl->memc_br4 = CFG_BR4; #endif - /* - * Map controller bank 5 for SHARC - */ - memctl->memc_or5 = CFG_OR5; - memctl->memc_br5 = CFG_BR5; - - memctl->memc_mamr = 0x00001000; - - /* - * Configure UPMB for SDRAM - */ - upmconfig(UPMB, (uint *)sdram_table, sizeof(sdram_table)/sizeof(uint)); - - memctl->memc_mptpr = CFG_MPTPR_1BK_8K; - - memctl->memc_mar = 0x00000088; - - /* - * Map controller bank 3 to the SDRAM bank at preliminary address. - */ - memctl->memc_or3 = CFG_OR3_PRELIM; - memctl->memc_br3 = CFG_BR3_PRELIM; - - memctl->memc_mbmr = CFG_MBMR_8COL; /* refresh not enabled yet */ - - udelay(200); - memctl->memc_mcr = 0x80806105; /* precharge */ - udelay(1); - memctl->memc_mcr = 0x80806106; /* load mode register */ - udelay(1); - memctl->memc_mcr = 0x80806130; /* autorefresh */ - udelay(1); - memctl->memc_mcr = 0x80806130; /* autorefresh */ - udelay(1); - memctl->memc_mcr = 0x80806130; /* autorefresh */ - udelay(1); - memctl->memc_mcr = 0x80806130; /* autorefresh */ - udelay(1); - memctl->memc_mcr = 0x80806130; /* autorefresh */ - udelay(1); - memctl->memc_mcr = 0x80806130; /* autorefresh */ - udelay(1); - memctl->memc_mcr = 0x80806130; /* autorefresh */ - udelay(1); - memctl->memc_mcr = 0x80806130; /* autorefresh */ - - memctl->memc_mbmr |= MBMR_PTBE; /* refresh enabled */ - - /* - * Check Bank 0 Memory Size for re-configuration - */ - size_b0 = dram_size (CFG_MBMR_8COL, (ulong *)SDRAM_BASE3_PRELIM, SDRAM_MAX_SIZE); - - memctl->memc_mbmr = CFG_MBMR_8COL | MBMR_PTBE; - - return (size_b0); + /* + * Map controller bank 5 for SHARC + */ + memctl->memc_or5 = CFG_OR5; + memctl->memc_br5 = CFG_BR5; + + memctl->memc_mamr = 0x00001000; + + /* + * Configure UPMB for SDRAM + */ + upmconfig (UPMB, (uint *) sdram_table, + sizeof (sdram_table) / sizeof (uint)); + + memctl->memc_mptpr = CFG_MPTPR_1BK_8K; + + memctl->memc_mar = 0x00000088; + + /* + * Map controller bank 3 to the SDRAM bank at preliminary address. + */ + memctl->memc_or3 = CFG_OR3_PRELIM; + memctl->memc_br3 = CFG_BR3_PRELIM; + + memctl->memc_mbmr = CFG_MBMR_8COL; /* refresh not enabled yet */ + + udelay (200); + memctl->memc_mcr = 0x80806105; /* precharge */ + udelay (1); + memctl->memc_mcr = 0x80806106; /* load mode register */ + udelay (1); + memctl->memc_mcr = 0x80806130; /* autorefresh */ + udelay (1); + memctl->memc_mcr = 0x80806130; /* autorefresh */ + udelay (1); + memctl->memc_mcr = 0x80806130; /* autorefresh */ + udelay (1); + memctl->memc_mcr = 0x80806130; /* autorefresh */ + udelay (1); + memctl->memc_mcr = 0x80806130; /* autorefresh */ + udelay (1); + memctl->memc_mcr = 0x80806130; /* autorefresh */ + udelay (1); + memctl->memc_mcr = 0x80806130; /* autorefresh */ + udelay (1); + memctl->memc_mcr = 0x80806130; /* autorefresh */ + + memctl->memc_mbmr |= MBMR_PTBE; /* refresh enabled */ + + /* + * Check Bank 0 Memory Size for re-configuration + */ + size_b0 = + dram_size (CFG_MBMR_8COL, (ulong *) SDRAM_BASE3_PRELIM, + SDRAM_MAX_SIZE); + + memctl->memc_mbmr = CFG_MBMR_8COL | MBMR_PTBE; + + return (size_b0); } /* ------------------------------------------------------------------------- */ @@ -268,60 +269,29 @@ initdram (int board_type) * - short between data lines */ -static long int dram_size (long int mamr_value, long int *base, long int maxsize) +static long int dram_size (long int mamr_value, long int *base, + long int maxsize) { - volatile immap_t *immr = (immap_t *)CFG_IMMR; - volatile memctl8xx_t *memctl = &immr->im_memctl; - volatile long int *addr; - ulong cnt, val; - ulong save[32]; /* to make test non-destructive */ - unsigned char i = 0; - - memctl->memc_mbmr = mamr_value; - - for (cnt = maxsize/sizeof(long); cnt > 0; cnt >>= 1) { - addr = base + cnt; /* pointer arith! */ - - save[i++] = *addr; - *addr = ~cnt; - } - - /* write 0 to base address */ - addr = base; - save[i] = *addr; - *addr = 0; - - /* check at base address */ - if ((val = *addr) != 0) { - *addr = save[i]; - return (0); - } + volatile immap_t *immr = (immap_t *) CFG_IMMR; + volatile memctl8xx_t *memctl = &immr->im_memctl; - for (cnt = 1; cnt <= maxsize/sizeof(long); cnt <<= 1) { - addr = base + cnt; /* pointer arith! */ + memctl->memc_mbmr = mamr_value; - val = *addr; - *addr = save[--i]; - - if (val != (~cnt)) { - return (cnt * sizeof(long)); - } - } - return (maxsize); + return (get_ram_size (base, maxsize)); } /* ------------------------------------------------------------------------- */ -void reset_phy(void) +void reset_phy (void) { - immap_t *immr = (immap_t *)CFG_IMMR; + immap_t *immr = (immap_t *) CFG_IMMR; /* De-assert Ethernet Powerdown */ - immr->im_cpm.cp_pbpar &= ~(CFG_PB_ETH_POWERDOWN); /* GPIO */ - immr->im_cpm.cp_pbodr &= ~(CFG_PB_ETH_POWERDOWN); /* active output */ - immr->im_cpm.cp_pbdir |= CFG_PB_ETH_POWERDOWN ; /* output */ - immr->im_cpm.cp_pbdat &= ~(CFG_PB_ETH_POWERDOWN); /* Enable PHY power */ - udelay(1000); + immr->im_cpm.cp_pbpar &= ~(CFG_PB_ETH_POWERDOWN); /* GPIO */ + immr->im_cpm.cp_pbodr &= ~(CFG_PB_ETH_POWERDOWN); /* active output */ + immr->im_cpm.cp_pbdir |= CFG_PB_ETH_POWERDOWN; /* output */ + immr->im_cpm.cp_pbdat &= ~(CFG_PB_ETH_POWERDOWN); /* Enable PHY power */ + udelay (1000); /* * RESET is implemented by a positive pulse of at least 1 us @@ -330,15 +300,15 @@ void reset_phy(void) * Configure RESET pins for NS DP83843 PHY, and RESET chip. * * Note: The RESET pin is high active, but there is an - * inverter on the SPD823TS board... + * inverter on the SPD823TS board... */ immr->im_ioport.iop_pcpar &= ~(CFG_PC_ETH_RESET); - immr->im_ioport.iop_pcdir |= CFG_PC_ETH_RESET; + immr->im_ioport.iop_pcdir |= CFG_PC_ETH_RESET; /* assert RESET signal of PHY */ immr->im_ioport.iop_pcdat &= ~(CFG_PC_ETH_RESET); udelay (10); /* de-assert RESET signal of PHY */ - immr->im_ioport.iop_pcdat |= CFG_PC_ETH_RESET; + immr->im_ioport.iop_pcdat |= CFG_PC_ETH_RESET; udelay (10); } @@ -350,19 +320,19 @@ void show_boot_progress (int status) # if defined(STATUS_LED_YELLOW) status_led_set (STATUS_LED_YELLOW, (status < 0) ? STATUS_LED_ON : STATUS_LED_OFF); -# endif /* STATUS_LED_YELLOW */ +# endif /* STATUS_LED_YELLOW */ # if defined(STATUS_LED_BOOT) if (status == 6) - status_led_set(STATUS_LED_BOOT, STATUS_LED_OFF); -# endif /* STATUS_LED_BOOT */ + status_led_set (STATUS_LED_BOOT, STATUS_LED_OFF); +# endif /* STATUS_LED_BOOT */ #endif /* CONFIG_STATUS_LED */ } /* ------------------------------------------------------------------------- */ -void ide_set_reset(int on) +void ide_set_reset (int on) { - volatile immap_t *immr = (immap_t *)CFG_IMMR; + volatile immap_t *immr = (immap_t *) CFG_IMMR; /* * Configure PC for IDE Reset Pin @@ -370,13 +340,13 @@ void ide_set_reset(int on) if (on) { /* assert RESET */ immr->im_ioport.iop_pcdat &= ~(CFG_PC_IDE_RESET); } else { /* release RESET */ - immr->im_ioport.iop_pcdat |= CFG_PC_IDE_RESET; + immr->im_ioport.iop_pcdat |= CFG_PC_IDE_RESET; } /* program port pin as GPIO output */ immr->im_ioport.iop_pcpar &= ~(CFG_PC_IDE_RESET); - immr->im_ioport.iop_pcso &= ~(CFG_PC_IDE_RESET); - immr->im_ioport.iop_pcdir |= CFG_PC_IDE_RESET; + immr->im_ioport.iop_pcso &= ~(CFG_PC_IDE_RESET); + immr->im_ioport.iop_pcdir |= CFG_PC_IDE_RESET; } /* ------------------------------------------------------------------------- */ |