summaryrefslogtreecommitdiff
path: root/board/idmr/idmr.c
diff options
context:
space:
mode:
Diffstat (limited to 'board/idmr/idmr.c')
-rw-r--r--board/idmr/idmr.c10
1 files changed, 5 insertions, 5 deletions
diff --git a/board/idmr/idmr.c b/board/idmr/idmr.c
index 4f073fc3190..3771c191e10 100644
--- a/board/idmr/idmr.c
+++ b/board/idmr/idmr.c
@@ -35,7 +35,7 @@ phys_size_t initdram (int board_type) {
/*
* After reset, CS0 is configured to cover entire address space. We
* need to configure it to its proper values, so that writes to
- * CFG_SDRAM_BASE and vicinity during SDRAM controller setup below do
+ * CONFIG_SYS_SDRAM_BASE and vicinity during SDRAM controller setup below do
* now fall under CS0 (see 16.3.1 of the MCF5271 Reference Manual).
*/
@@ -99,7 +99,7 @@ phys_size_t initdram (int board_type) {
* PS: 16 bit
*/
mbar_writeLong(MCF_SDRAMC_DACR0,
- MCF_SDRAMC_DACRn_BA(CFG_SDRAM_BASE>>18) |
+ MCF_SDRAMC_DACRn_BA(CONFIG_SYS_SDRAM_BASE>>18) |
MCF_SDRAMC_DACRn_BA(0x00) |
MCF_SDRAMC_DACRn_CASL(0x03) |
MCF_SDRAMC_DACRn_CBM(0x03) |
@@ -117,7 +117,7 @@ phys_size_t initdram (int board_type) {
MCF_SDRAMC_DACRn_IP);
/* Write to this block to initiate precharge */
- *(volatile u16 *)(CFG_SDRAM_BASE) = 0xa5a5;
+ *(volatile u16 *)(CONFIG_SYS_SDRAM_BASE) = 0xa5a5;
/*
* Wait at least 20ns to allow banks to precharge (t_RP = 20ns). We
@@ -153,9 +153,9 @@ phys_size_t initdram (int board_type) {
* Burst Type = Sequential
* Burst Length = 1
*/
- *(volatile u32 *)(CFG_SDRAM_BASE + 0x1800) = 0xa5a5a5a5;
+ *(volatile u32 *)(CONFIG_SYS_SDRAM_BASE + 0x1800) = 0xa5a5a5a5;
- return CFG_SDRAM_SIZE * 1024 * 1024;
+ return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
};