summaryrefslogtreecommitdiff
path: root/board/hymod/flash.h
diff options
context:
space:
mode:
Diffstat (limited to 'board/hymod/flash.h')
-rw-r--r--board/hymod/flash.h249
1 files changed, 121 insertions, 128 deletions
diff --git a/board/hymod/flash.h b/board/hymod/flash.h
index 3bccbc97aa4..10db7fcacf5 100644
--- a/board/hymod/flash.h
+++ b/board/hymod/flash.h
@@ -1,163 +1,156 @@
-/*************** DEFINES for Intel StrataFlash FLASH chip ********************/
-
/*
- * acceptable chips types are:
+ * (C) Copyright 2000
+ * Murray Jensen, CSIRO-MIT, <Murray.Jensen@csiro.au>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
*
- * 28F320J5, 28F640J5, 28F320J3A, 28F640J3A and 28F128J3A
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
*/
-/* register addresses, valid only following an CHIP_CMD_RD_ID command */
-#define CHIP_ADDR_REG_MAN 0x000000 /* manufacturer's id */
-#define CHIP_ADDR_REG_DEV 0x000001 /* device id */
-#define CHIP_ADDR_REG_CFGM 0x000003 /* master lock config */
-#define CHIP_ADDR_REG_CFG(b) (((b)<<16)|2) /* lock config for block b */
+/*************** DEFINES for Intel StrataFlash FLASH chip ********************/
/* Commands */
-#define CHIP_CMD_RST 0xFF /* reset flash */
-#define CHIP_CMD_RD_ID 0x90 /* read the id and lock bits */
-#define CHIP_CMD_RD_QUERY 0x98 /* read device capabilities */
-#define CHIP_CMD_RD_STAT 0x70 /* read the status register */
-#define CHIP_CMD_CLR_STAT 0x50 /* clear the staus register */
-#define CHIP_CMD_WR_BUF 0xE8 /* clear the staus register */
-#define CHIP_CMD_PROG 0x40 /* program word command */
-#define CHIP_CMD_ERASE1 0x20 /* 1st word for block erase */
-#define CHIP_CMD_ERASE2 0xD0 /* 2nd word for block erase */
-#define CHIP_CMD_ERASE_SUSP 0xB0 /* suspend block erase */
-#define CHIP_CMD_LOCK 0x60 /* 1st word for all lock cmds */
-#define CHIP_CMD_SET_LOCK_BLK 0x01 /* 2nd wrd set block lock bit */
-#define CHIP_CMD_SET_LOCK_MSTR 0xF1 /* 2nd wrd set master lck bit */
-#define CHIP_CMD_CLR_LOCK_BLK 0xD0 /* 2nd wrd clear blk lck bit */
+#define ISF_CMD_RST 0xFF /* reset flash */
+#define ISF_CMD_RD_ID 0x90 /* read the id and lock bits */
+#define ISF_CMD_RD_QUERY 0x98 /* read device capabilities */
+#define ISF_CMD_RD_STAT 0x70 /* read the status register */
+#define ISF_CMD_CLR_STAT 0x50 /* clear the staus register */
+#define ISF_CMD_WR_BUF 0xE8 /* clear the staus register */
+#define ISF_CMD_PROG 0x40 /* program word command */
+#define ISF_CMD_ERASE1 0x20 /* 1st word for block erase */
+#define ISF_CMD_ERASE2 0xD0 /* 2nd word for block erase */
+#define ISF_CMD_ERASE_SUSP 0xB0 /* suspend block erase */
+#define ISF_CMD_LOCK 0x60 /* 1st word for all lock cmds */
+#define ISF_CMD_SET_LOCK_BLK 0x01 /* 2nd wrd set block lock bit */
+#define ISF_CMD_SET_LOCK_MSTR 0xF1 /* 2nd wrd set master lck bit */
+#define ISF_CMD_CLR_LOCK_BLK 0xD0 /* 2nd wrd clear blk lck bit */
/* status register bits */
-#define CHIP_STAT_DPS 0x02 /* Device Protect Status */
-#define CHIP_STAT_VPPS 0x08 /* VPP Status */
-#define CHIP_STAT_PSLBS 0x10 /* Program+Set Lock Bit Stat */
-#define CHIP_STAT_ECLBS 0x20 /* Erase+Clr Lock Bit Stat */
-#define CHIP_STAT_ESS 0x40 /* Erase Suspend Status */
-#define CHIP_STAT_RDY 0x80 /* WSM Mach Status, 1=rdy */
-
-#define CHIP_STAT_ERR (CHIP_STAT_VPPS | CHIP_STAT_DPS | \
- CHIP_STAT_ECLBS | CHIP_STAT_PSLBS)
-
-/* ID and Lock Configuration */
-#define CHIP_RD_ID_LOCK 0x01 /* Bit 0 of each byte */
-#define CHIP_RD_ID_MAN 0x89 /* Manufacturer code = 0x89 */
-#define CHIP_RD_ID_DEV CFG_FLASH_ID
-
-/* dimensions */
-#define CHIP_WIDTH 2 /* chips are in 16 bit mode */
-#define CHIP_WSHIFT 1 /* (log2 of CHIP_WIDTH) */
-#define CHIP_NBLOCKS CFG_FLASH_NBLOCKS
-#define CHIP_BLKSZ (128 * 1024) /* of 128Kbytes each */
-#define CHIP_SIZE (CHIP_BLKSZ * CHIP_NBLOCKS)
+#define ISF_STAT_DPS 0x02 /* Device Protect Status */
+#define ISF_STAT_VPPS 0x08 /* VPP Status */
+#define ISF_STAT_PSLBS 0x10 /* Program+Set Lock Bit Stat */
+#define ISF_STAT_ECLBS 0x20 /* Erase+Clr Lock Bit Stat */
+#define ISF_STAT_ESS 0x40 /* Erase Suspend Status */
+#define ISF_STAT_RDY 0x80 /* WSM Mach Status, 1=rdy */
+
+#define ISF_STAT_ERR (ISF_STAT_VPPS | ISF_STAT_DPS | \
+ ISF_STAT_ECLBS | ISF_STAT_PSLBS)
+
+/* register addresses, valid only following an ISF_CMD_RD_ID command */
+#define ISF_REG_MAN_CODE 0x00 /* manufacturer code */
+#define ISF_REG_DEV_CODE 0x01 /* device code */
+#define ISF_REG_BLK_LCK 0x02 /* block lock configuration */
+#define ISF_REG_MST_LCK 0x03 /* master lock configuration */
/********************** DEFINES for Hymod Flash ******************************/
/*
- * The hymod board has 2 x 28F320J5 chips running in
- * 16 bit mode, for a 32 bit wide bank.
+ * this code requires that the flash on any Hymod board appear as a bank
+ * of two (identical) 16bit Intel StrataFlash chips with 64Kword erase
+ * sectors (or blocks), running in x16 bit mode and connected side-by-side
+ * to make a 32-bit wide bus.
*/
-typedef unsigned long bank_word_t; /* 8/16/32/64bit unsigned int */
-typedef volatile bank_word_t *bank_addr_t;
-typedef unsigned long bank_size_t; /* want this big - >= 32 bit */
+typedef unsigned long bank_word_t;
+typedef bank_word_t bank_blk_t[64 * 1024];
+
+#define BANK_FILL_WORD(b) (((bank_word_t)(b) << 16) | (bank_word_t)(b))
+
+#ifdef EXAMPLE
-#define BANK_CHIP_WIDTH 2 /* each bank is 2 chips wide */
-#define BANK_CHIP_WSHIFT 1 /* (log2 of BANK_CHIP_WIDTH) */
+/* theoretically the following examples should also work */
-#define BANK_WIDTH (CHIP_WIDTH * BANK_CHIP_WIDTH)
-#define BANK_WSHIFT (CHIP_WSHIFT + BANK_CHIP_WSHIFT)
-#define BANK_NBLOCKS CHIP_NBLOCKS
-#define BANK_BLKSZ (CHIP_BLKSZ * BANK_CHIP_WIDTH)
-#define BANK_SIZE (CHIP_SIZE * BANK_CHIP_WIDTH)
+/* one flash chip in x8 mode with 128Kword sectors and 8bit bus */
+typedef unsigned char bank_word_t;
+typedef bank_word_t bank_blk_t[128 * 1024];
+#define BANK_FILL_WORD(b) ((bank_word_t)(b))
-#define MAX_BANKS 1 /* only one bank possible */
+/* four flash chips in x16 mode with 32Kword sectors and 64bit bus */
+typedef unsigned long long bank_word_t;
+typedef bank_word_t bank_blk_t[32 * 1024];
+#define BANK_FILL_WORD(b) ( \
+ ((bank_word_t)(b) << 48) \
+ ((bank_word_t)(b) << 32) \
+ ((bank_word_t)(b) << 16) \
+ ((bank_word_t)(b) << 0) \
+ )
+
+#endif /* EXAMPLE */
+
+/* the sizes of these two types should probably be the same */
+typedef volatile bank_word_t *bank_addr_t;
+typedef unsigned long bank_size_t;
/* align bank addresses and sizes to bank word boundaries */
#define BANK_ADDR_WORD_ALIGN(a) ((bank_addr_t)((bank_size_t)(a) \
- & ~(BANK_WIDTH - 1)))
-#define BANK_SIZE_WORD_ALIGN(s) ((bank_size_t)BANK_ADDR_WORD_ALIGN( \
- (bank_size_t)(s) + (BANK_WIDTH - 1)))
+ & ~(sizeof (bank_word_t) - 1)))
+#define BANK_SIZE_WORD_ALIGN(s) (((bank_size_t)(s) + sizeof (bank_word_t) - 1) \
+ & ~(sizeof (bank_word_t) - 1))
/* align bank addresses and sizes to bank block boundaries */
#define BANK_ADDR_BLK_ALIGN(a) ((bank_addr_t)((bank_size_t)(a) \
- & ~(BANK_BLKSZ - 1)))
-#define BANK_SIZE_BLK_ALIGN(s) ((bank_size_t)BANK_ADDR_BLK_ALIGN( \
- (bank_size_t)(s) + (BANK_BLKSZ - 1)))
-
-/* align bank addresses and sizes to bank boundaries */
-#define BANK_ADDR_BANK_ALIGN(a) ((bank_addr_t)((bank_size_t)(a) \
- & ~(BANK_SIZE - 1)))
-#define BANK_SIZE_BANK_ALIGN(s) ((bank_size_t)BANK_ADDR_BANK_ALIGN( \
- (bank_size_t)(s) + (BANK_SIZE - 1)))
+ & ~(sizeof (bank_blk_t) - 1)))
+#define BANK_SIZE_BLK_ALIGN(s) (((bank_size_t)(s) + sizeof (bank_blk_t) - 1) \
+ & ~(sizeof (bank_blk_t) - 1))
/* add an offset to a bank address */
-#define BANK_ADDR_OFFSET(a, o) (bank_addr_t)((bank_size_t)(a) + \
- (bank_size_t)(o))
-
-/* get base address of bank b, given flash base address a */
-#define BANK_ADDR_BASE(a, b) BANK_ADDR_OFFSET(BANK_ADDR_BANK_ALIGN(a), \
- (bank_size_t)(b) * BANK_SIZE)
+#define BANK_ADDR_OFFSET(a, o) ((bank_addr_t)((bank_size_t)(a) + \
+ (bank_size_t)(o)))
/* adjust a bank address to start of next word, block or bank */
#define BANK_ADDR_NEXT_WORD(a) BANK_ADDR_OFFSET(BANK_ADDR_WORD_ALIGN(a), \
- BANK_WIDTH)
+ sizeof (bank_word_t))
#define BANK_ADDR_NEXT_BLK(a) BANK_ADDR_OFFSET(BANK_ADDR_BLK_ALIGN(a), \
- BANK_BLKSZ)
-#define BANK_ADDR_NEXT_BANK(a) BANK_ADDR_OFFSET(BANK_ADDR_BANK_ALIGN(a), \
- BANK_SIZE)
-
-/* get bank address of chip register r given a bank base address a */
-#define BANK_ADDR_REG(a, r) BANK_ADDR_OFFSET(BANK_ADDR_BANK_ALIGN(a), \
- ((bank_size_t)(r) << BANK_WSHIFT))
-
-/* make a bank address for each chip register address */
-
-#define BANK_ADDR_REG_MAN(a) BANK_ADDR_REG((a), CHIP_ADDR_REG_MAN)
-#define BANK_ADDR_REG_DEV(a) BANK_ADDR_REG((a), CHIP_ADDR_REG_DEV)
-#define BANK_ADDR_REG_CFGM(a) BANK_ADDR_REG((a), CHIP_ADDR_REG_CFGM)
-#define BANK_ADDR_REG_CFG(b,a) BANK_ADDR_REG((a), CHIP_ADDR_REG_CFG(b))
-
-/*
- * replicate a chip cmd/stat/rd value into each byte position within a word
- * so that multiple chips are accessed in a single word i/o operation
- *
- * this must be as wide as the bank_word_t type, and take into account the
- * chip width and bank layout
- */
+ sizeof (bank_blk_t))
-#define BANK_FILL_WORD(o) ((bank_word_t)( \
- ((unsigned long)(o) << 16) | \
- ((unsigned long)(o) << 0) \
- ))
+/* get bank address of register r given a bank base address a and block num b */
+#define BANK_ADDR_REG(a, b, r) BANK_ADDR_OFFSET(BANK_ADDR_OFFSET((a), \
+ (bank_size_t)(b) * sizeof (bank_blk_t)), \
+ (bank_size_t)(r) * sizeof (bank_word_t))
-/* make a bank word value for each chip cmd/stat/rd value */
+/* make a bank word value for each StrataFlash value */
/* Commands */
-#define BANK_CMD_RST BANK_FILL_WORD(CHIP_CMD_RST)
-#define BANK_CMD_RD_ID BANK_FILL_WORD(CHIP_CMD_RD_ID)
-#define BANK_CMD_RD_STAT BANK_FILL_WORD(CHIP_CMD_RD_STAT)
-#define BANK_CMD_CLR_STAT BANK_FILL_WORD(CHIP_CMD_CLR_STAT)
-#define BANK_CMD_ERASE1 BANK_FILL_WORD(CHIP_CMD_ERASE1)
-#define BANK_CMD_ERASE2 BANK_FILL_WORD(CHIP_CMD_ERASE2)
-#define BANK_CMD_PROG BANK_FILL_WORD(CHIP_CMD_PROG)
-#define BANK_CMD_LOCK BANK_FILL_WORD(CHIP_CMD_LOCK)
-#define BANK_CMD_SET_LOCK_BLK BANK_FILL_WORD(CHIP_CMD_SET_LOCK_BLK)
-#define BANK_CMD_SET_LOCK_MSTR BANK_FILL_WORD(CHIP_CMD_SET_LOCK_MSTR)
-#define BANK_CMD_CLR_LOCK_BLK BANK_FILL_WORD(CHIP_CMD_CLR_LOCK_BLK)
+#define BANK_CMD_RST BANK_FILL_WORD(ISF_CMD_RST)
+#define BANK_CMD_RD_ID BANK_FILL_WORD(ISF_CMD_RD_ID)
+#define BANK_CMD_RD_STAT BANK_FILL_WORD(ISF_CMD_RD_STAT)
+#define BANK_CMD_CLR_STAT BANK_FILL_WORD(ISF_CMD_CLR_STAT)
+#define BANK_CMD_ERASE1 BANK_FILL_WORD(ISF_CMD_ERASE1)
+#define BANK_CMD_ERASE2 BANK_FILL_WORD(ISF_CMD_ERASE2)
+#define BANK_CMD_PROG BANK_FILL_WORD(ISF_CMD_PROG)
+#define BANK_CMD_LOCK BANK_FILL_WORD(ISF_CMD_LOCK)
+#define BANK_CMD_SET_LOCK_BLK BANK_FILL_WORD(ISF_CMD_SET_LOCK_BLK)
+#define BANK_CMD_SET_LOCK_MSTR BANK_FILL_WORD(ISF_CMD_SET_LOCK_MSTR)
+#define BANK_CMD_CLR_LOCK_BLK BANK_FILL_WORD(ISF_CMD_CLR_LOCK_BLK)
/* status register bits */
-#define BANK_STAT_DPS BANK_FILL_WORD(CHIP_STAT_DPS)
-#define BANK_STAT_PSS BANK_FILL_WORD(CHIP_STAT_PSS)
-#define BANK_STAT_VPPS BANK_FILL_WORD(CHIP_STAT_VPPS)
-#define BANK_STAT_PSLBS BANK_FILL_WORD(CHIP_STAT_PSLBS)
-#define BANK_STAT_ECLBS BANK_FILL_WORD(CHIP_STAT_ECLBS)
-#define BANK_STAT_ESS BANK_FILL_WORD(CHIP_STAT_ESS)
-#define BANK_STAT_RDY BANK_FILL_WORD(CHIP_STAT_RDY)
-
-#define BANK_STAT_ERR BANK_FILL_WORD(CHIP_STAT_ERR)
-
-/* ID and Lock Configuration */
-#define BANK_RD_ID_LOCK BANK_FILL_WORD(CHIP_RD_ID_LOCK)
-#define BANK_RD_ID_MAN BANK_FILL_WORD(CHIP_RD_ID_MAN)
-#define BANK_RD_ID_DEV BANK_FILL_WORD(CHIP_RD_ID_DEV)
+#define BANK_STAT_DPS BANK_FILL_WORD(ISF_STAT_DPS)
+#define BANK_STAT_PSS BANK_FILL_WORD(ISF_STAT_PSS)
+#define BANK_STAT_VPPS BANK_FILL_WORD(ISF_STAT_VPPS)
+#define BANK_STAT_PSLBS BANK_FILL_WORD(ISF_STAT_PSLBS)
+#define BANK_STAT_ECLBS BANK_FILL_WORD(ISF_STAT_ECLBS)
+#define BANK_STAT_ESS BANK_FILL_WORD(ISF_STAT_ESS)
+#define BANK_STAT_RDY BANK_FILL_WORD(ISF_STAT_RDY)
+
+#define BANK_STAT_ERR BANK_FILL_WORD(ISF_STAT_ERR)
+
+/* make a bank register address for each StrataFlash register address */
+
+#define BANK_REG_MAN_CODE(a) BANK_ADDR_REG((a), 0, ISF_REG_MAN_CODE)
+#define BANK_REG_DEV_CODE(a) BANK_ADDR_REG((a), 0, ISF_REG_DEV_CODE)
+#define BANK_REG_BLK_LCK(a, b) BANK_ADDR_REG((a), (b), ISF_REG_BLK_LCK)
+#define BANK_REG_MST_LCK(a) BANK_ADDR_REG((a), 0, ISF_REG_MST_LCK)