diff options
Diffstat (limited to 'board/gdsys/intip/intip.c')
| -rw-r--r-- | board/gdsys/intip/intip.c | 221 |
1 files changed, 0 insertions, 221 deletions
diff --git a/board/gdsys/intip/intip.c b/board/gdsys/intip/intip.c deleted file mode 100644 index 2d7d789b23b..00000000000 --- a/board/gdsys/intip/intip.c +++ /dev/null @@ -1,221 +0,0 @@ -/* - * (C) Copyright 2009 - * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de - * - * Based on board/amcc/canyonlands/canyonlands.c - * (C) Copyright 2008 - * Stefan Roese, DENX Software Engineering, sr@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/ppc440.h> -#include <libfdt.h> -#include <fdt_support.h> -#include <i2c.h> -#include <asm/processor.h> -#include <asm/io.h> -#include <asm/mmu.h> -#include <asm/4xx_pcie.h> -#include <asm/ppc4xx-gpio.h> - -extern flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; - -DECLARE_GLOBAL_DATA_PTR; - -#define CONFIG_SYS_BCSR3_PCIE 0x10 - -int board_early_init_f(void) -{ - /* - * Setup the interrupt controller polarities, triggers, etc. - */ - mtdcr(UIC0SR, 0xffffffff); /* clear all */ - mtdcr(UIC0ER, 0x00000000); /* disable all */ - mtdcr(UIC0CR, 0x00000005); /* ATI & UIC1 crit are critical */ - mtdcr(UIC0PR, 0xffffffff); /* per ref-board manual */ - mtdcr(UIC0TR, 0x00000000); /* per ref-board manual */ - mtdcr(UIC0VR, 0x00000000); /* int31 highest, base=0x000 */ - mtdcr(UIC0SR, 0xffffffff); /* clear all */ - - mtdcr(UIC1SR, 0xffffffff); /* clear all */ - mtdcr(UIC1ER, 0x00000000); /* disable all */ - mtdcr(UIC1CR, 0x00000000); /* all non-critical */ - mtdcr(UIC1PR, 0xffffffff); /* per ref-board manual */ - mtdcr(UIC1TR, 0x00000000); /* per ref-board manual */ - mtdcr(UIC1VR, 0x00000000); /* int31 highest, base=0x000 */ - mtdcr(UIC1SR, 0xffffffff); /* clear all */ - - mtdcr(UIC2SR, 0xffffffff); /* clear all */ - mtdcr(UIC2ER, 0x00000000); /* disable all */ - mtdcr(UIC2CR, 0x00000000); /* all non-critical */ - mtdcr(UIC2PR, 0xffffffff); /* per ref-board manual */ - mtdcr(UIC2TR, 0x00000000); /* per ref-board manual */ - mtdcr(UIC2VR, 0x00000000); /* int31 highest, base=0x000 */ - mtdcr(UIC2SR, 0xffffffff); /* clear all */ - - mtdcr(UIC3SR, 0xffffffff); /* clear all */ - mtdcr(UIC3ER, 0x00000000); /* disable all */ - mtdcr(UIC3CR, 0x00000000); /* all non-critical */ - mtdcr(UIC3PR, 0xffffffff); /* per ref-board manual */ - mtdcr(UIC3TR, 0x00000000); /* per ref-board manual */ - mtdcr(UIC3VR, 0x00000000); /* int31 highest, base=0x000 */ - mtdcr(UIC3SR, 0xffffffff); /* clear all */ - - /* - * Configure PFC (Pin Function Control) registers - * enable GPIO 49-63 - * UART0: 4 pins - */ - mtsdr(SDR0_PFC0, 0x00007fff); - mtsdr(SDR0_PFC1, 0x00040000); - - /* Enable PCI host functionality in SDR0_PCI0 */ - mtsdr(SDR0_PCI0, 0xe0000000); - - mtsdr(SDR0_SRST1, 0); /* Pull AHB out of reset default=1 */ - - /* Setup PLB4-AHB bridge based on the system address map */ - mtdcr(AHB_TOP, 0x8000004B); - mtdcr(AHB_BOT, 0x8000004B); - - /* - * Configure USB-STP pins as alternate and not GPIO - * It seems to be neccessary to configure the STP pins as GPIO - * input at powerup (perhaps while USB reset is asserted). So - * we configure those pins to their "real" function now. - */ - gpio_config(16, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1); - gpio_config(19, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1); - - /* Trigger board component reset */ - out_le16((void *)CONFIG_SYS_IO_BASE, 0xffff); - out_le16((void *)CONFIG_SYS_IO_BASE + 0x100, 0xffff); - udelay(50); - out_le16((void *)CONFIG_SYS_IO_BASE, 0xffbf); - out_le16((void *)CONFIG_SYS_IO_BASE + 0x100, 0xffbf); - udelay(50); - out_le16((void *)CONFIG_SYS_IO_BASE, 0xffff); - out_le16((void *)CONFIG_SYS_IO_BASE + 0x100, 0xffff); - - return 0; -} - -int get_cpu_num(void) -{ - int cpu = NA_OR_UNKNOWN_CPU; - - return cpu; -} - -int checkboard(void) -{ - char buf[64]; - int i = getenv_f("serial#", buf, sizeof(buf)); - -#ifdef CONFIG_DEVCONCENTER - printf("Board: DevCon-Center"); -#else - printf("Board: Intip"); -#endif - - if (i > 0) { - puts(", serial# "); - puts(buf); - } - putc('\n'); - - return 0; -} - -int board_early_init_r(void) -{ - /* - * CompactCenter has 64MBytes, DevCon-Center 128MBytes of NOR FLASH - * (Spansion 29GL512), but the boot EBC mapping only supports a maximum - * of 16MBytes (4.ff00.0000 - 4.ffff.ffff). - * To solve this problem, the FLASH has to get remapped to another - * EBC address which accepts bigger regions: - * - * 0xfn00.0000 -> 4.cn00.0000 - */ - - u32 bxcr_bw = (CONFIG_SYS_FLASH_SIZE == 128 << 20) ? - EBC_BXCR_BS_128MB : EBC_BXCR_BS_64MB; - - /* Remap the NOR FLASH to 0xcn00.0000 ... 0xcfff.ffff */ - mtebc(PB0CR, CONFIG_SYS_FLASH_BASE_PHYS_L - | bxcr_bw - | EBC_BXCR_BU_RW - | EBC_BXCR_BW_16BIT); - - /* Remove TLB entry of boot EBC mapping */ - remove_tlb(CONFIG_SYS_BOOT_BASE_ADDR, 16 << 20); - - /* Add TLB entry for 0xfn00.0000 -> 0x4.cn00.0000 */ - program_tlb(CONFIG_SYS_FLASH_BASE_PHYS, CONFIG_SYS_FLASH_BASE, - CONFIG_SYS_FLASH_SIZE, TLB_WORD2_I_ENABLE); - - /* - * Now accessing of the whole 64Mbytes of NOR FLASH at virtual address - * 0xfc00.0000 is possible - */ - - /* - * Clear potential errors resulting from auto-calibration. - * If not done, then we could get an interrupt later on when - * exceptions are enabled. - */ - set_mcsr(get_mcsr()); - - return 0; -} - -int misc_init_r(void) -{ - u32 sdr0_srst1 = 0; - u32 eth_cfg; - - /* - * Set EMAC mode/configuration (GMII, SGMII, RGMII...). - * This is board specific, so let's do it here. - */ - mfsdr(SDR0_ETH_CFG, eth_cfg); - /* disable SGMII mode */ - eth_cfg &= ~(SDR0_ETH_CFG_SGMII2_ENABLE | - SDR0_ETH_CFG_SGMII1_ENABLE | - SDR0_ETH_CFG_SGMII0_ENABLE); - /* Set the for 2 RGMII mode */ - /* GMC0 EMAC4_0, GMC0 EMAC4_1, RGMII Bridge 0 */ - eth_cfg &= ~SDR0_ETH_CFG_GMC0_BRIDGE_SEL; - eth_cfg |= SDR0_ETH_CFG_GMC1_BRIDGE_SEL; - mtsdr(SDR0_ETH_CFG, eth_cfg); - - /* - * The AHB Bridge core is held in reset after power-on or reset - * so enable it now - */ - mfsdr(SDR0_SRST1, sdr0_srst1); - sdr0_srst1 &= ~SDR0_SRST1_AHB; - mtsdr(SDR0_SRST1, sdr0_srst1); - - return 0; -} - -#ifdef CONFIG_OF_BOARD_SETUP -extern void __ft_board_setup(void *blob, bd_t *bd); - -int ft_board_setup(void *blob, bd_t *bd) -{ - __ft_board_setup(blob, bd); - - fdt_find_and_setprop(blob, "/plb/pciex@d00000000", "status", - "disabled", sizeof("disabled"), 1); - - fdt_find_and_setprop(blob, "/plb/sata@bffd1000", "status", - "disabled", sizeof("disabled"), 1); - - return 0; -} -#endif /* CONFIG_OF_BOARD_SETUP */ |