summaryrefslogtreecommitdiff
path: root/board/gdsys/405ex/io64.c
diff options
context:
space:
mode:
Diffstat (limited to 'board/gdsys/405ex/io64.c')
-rw-r--r--board/gdsys/405ex/io64.c407
1 files changed, 0 insertions, 407 deletions
diff --git a/board/gdsys/405ex/io64.c b/board/gdsys/405ex/io64.c
deleted file mode 100644
index 9ef965bbfa..0000000000
--- a/board/gdsys/405ex/io64.c
+++ /dev/null
@@ -1,407 +0,0 @@
-/*
- * (C) Copyright 2010
- * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de
- *
- * based on kilauea.c
- * by Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/ppc4xx.h>
-#include <asm/ppc405.h>
-#include <libfdt.h>
-#include <fdt_support.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <linux/errno.h>
-#include <asm/ppc4xx-gpio.h>
-#include <flash.h>
-
-#include <pca9698.h>
-
-#include "405ex.h"
-#include <gdsys_fpga.h>
-
-#include <miiphy.h>
-#include <i2c.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define PHYREG_CONTROL 0
-#define PHYREG_PAGE_ADDRESS 22
-#define PHYREG_PG0_COPPER_SPECIFIC_CONTROL_1 16
-#define PHYREG_PG2_COPPER_SPECIFIC_CONTROL_2 26
-#define PHYREG_PG2_MAC_SPECIFIC_STATUS_1 17
-#define PHYREG_PG2_MAC_SPECIFIC_CONTROL 21
-
-#define LATCH0_BASE (CONFIG_SYS_LATCH_BASE)
-#define LATCH1_BASE (CONFIG_SYS_LATCH_BASE + 0x100)
-#define LATCH2_BASE (CONFIG_SYS_LATCH_BASE + 0x200)
-#define LATCH3_BASE (CONFIG_SYS_LATCH_BASE + 0x300)
-
-enum {
- UNITTYPE_CCD_SWITCH = 1,
-};
-
-enum {
- HWVER_100 = 0,
- HWVER_110 = 1,
-};
-
-struct ihs_fpga *fpga_ptr[] = CONFIG_SYS_FPGA_PTR;
-
-static inline void blank_string(int size)
-{
- int i;
-
- for (i = 0; i < size; i++)
- putc('\b');
- for (i = 0; i < size; i++)
- putc(' ');
- for (i = 0; i < size; i++)
- putc('\b');
-}
-
-/*
- * Board early initialization function
- */
-int misc_init_r(void)
-{
- /*
- * Note: DTT has been removed. Please use UCLASS_THERMAL.
- *
- * startup fans
- *
- * dtt_init();
- */
-
-#ifdef CONFIG_ENV_IS_IN_FLASH
- /* Monitor protection ON by default */
- flash_protect(FLAG_PROTECT_SET,
- -CONFIG_SYS_MONITOR_LEN,
- 0xffffffff,
- &flash_info[0]);
-#endif
-
- return 0;
-}
-
-static void print_fpga_info(unsigned dev)
-{
- u16 versions;
- u16 fpga_version;
- u16 fpga_features;
- int fpga_state = get_fpga_state(dev);
-
- unsigned unit_type;
- unsigned hardware_version;
- unsigned feature_channels;
- unsigned feature_expansion;
-
- FPGA_GET_REG(dev, versions, &versions);
- FPGA_GET_REG(dev, fpga_version, &fpga_version);
- FPGA_GET_REG(dev, fpga_features, &fpga_features);
-
- printf("FPGA%d: ", dev);
- if (fpga_state & FPGA_STATE_PLATFORM)
- printf("(legacy) ");
-
- if (fpga_state & FPGA_STATE_DONE_FAILED) {
- printf(" done timed out\n");
- return;
- }
-
- if (fpga_state & FPGA_STATE_REFLECTION_FAILED) {
- printf(" refelectione test failed\n");
- return;
- }
-
- unit_type = (versions & 0xf000) >> 12;
- hardware_version = versions & 0x000f;
- feature_channels = fpga_features & 0x007f;
- feature_expansion = fpga_features & (1<<15);
-
- switch (unit_type) {
- case UNITTYPE_CCD_SWITCH:
- printf("CCD-Switch");
- break;
-
- default:
- printf("UnitType %d(not supported)", unit_type);
- break;
- }
-
- switch (hardware_version) {
- case HWVER_100:
- printf(" HW-Ver 1.00\n");
- break;
-
- case HWVER_110:
- printf(" HW-Ver 1.10\n");
- break;
-
- default:
- printf(" HW-Ver %d(not supported)\n",
- hardware_version);
- break;
- }
-
- printf(" FPGA V %d.%02d, features:",
- fpga_version / 100, fpga_version % 100);
-
- printf(" %d channel(s)", feature_channels);
-
- printf(", expansion %ssupported\n", feature_expansion ? "" : "un");
-}
-
-int checkboard(void)
-{
- char *s = getenv("serial#");
-
- printf("Board: CATCenter Io64\n");
-
- if (s != NULL) {
- puts(", serial# ");
- puts(s);
- }
-
- return 0;
-}
-
-int configure_gbit_phy(char *bus, unsigned char addr)
-{
- unsigned short value;
-
- /* select page 0 */
- if (miiphy_write(bus, addr, PHYREG_PAGE_ADDRESS, 0x0000))
- goto err_out;
- /* switch to powerdown */
- if (miiphy_read(bus, addr, PHYREG_PG0_COPPER_SPECIFIC_CONTROL_1,
- &value))
- goto err_out;
- if (miiphy_write(bus, addr, PHYREG_PG0_COPPER_SPECIFIC_CONTROL_1,
- value | 0x0004))
- goto err_out;
- /* select page 2 */
- if (miiphy_write(bus, addr, PHYREG_PAGE_ADDRESS, 0x0002))
- goto err_out;
- /* disable SGMII autonegotiation */
- if (miiphy_write(bus, addr, PHYREG_PG2_MAC_SPECIFIC_CONTROL, 48))
- goto err_out;
- /* select page 0 */
- if (miiphy_write(bus, addr, PHYREG_PAGE_ADDRESS, 0x0000))
- goto err_out;
- /* switch from powerdown to normal operation */
- if (miiphy_read(bus, addr, PHYREG_PG0_COPPER_SPECIFIC_CONTROL_1,
- &value))
- goto err_out;
- if (miiphy_write(bus, addr, PHYREG_PG0_COPPER_SPECIFIC_CONTROL_1,
- value & ~0x0004))
- goto err_out;
- /* reset phy so settings take effect */
- if (miiphy_write(bus, addr, PHYREG_CONTROL, 0x9140))
- goto err_out;
-
- return 0;
-
-err_out:
- printf("Error writing to the PHY addr=%02x\n", addr);
- return -1;
-}
-
-int verify_gbit_phy(char *bus, unsigned char addr)
-{
- unsigned short value;
-
- /* select page 2 */
- if (miiphy_write(bus, addr, PHYREG_PAGE_ADDRESS, 0x0002))
- goto err_out;
- /* verify SGMII link status */
- if (miiphy_read(bus, addr, PHYREG_PG2_MAC_SPECIFIC_STATUS_1, &value))
- goto err_out;
- if (!(value & (1 << 10)))
- return -2;
-
- return 0;
-
-err_out:
- printf("Error writing to the PHY addr=%02x\n", addr);
- return -1;
-}
-
-int last_stage_init(void)
-{
- unsigned int k;
- unsigned int fpga;
- int failed = 0;
- char str_phys[] = "Setup PHYs -";
- char str_serdes[] = "Start SERDES blocks";
- char str_channels[] = "Start FPGA channels";
- char str_locks[] = "Verify SERDES locks";
- char str_hicb[] = "Verify HICB status";
- char str_status[] = "Verify PHY status -";
- char slash[] = "\\|/-\\|/-";
-
- print_fpga_info(0);
- print_fpga_info(1);
-
- /* setup Gbit PHYs */
- puts("TRANS: ");
- puts(str_phys);
- int retval;
- struct mii_dev *mdiodev = mdio_alloc();
- if (!mdiodev)
- return -ENOMEM;
- strncpy(mdiodev->name, CONFIG_SYS_GBIT_MII_BUSNAME, MDIO_NAME_LEN);
- mdiodev->read = bb_miiphy_read;
- mdiodev->write = bb_miiphy_write;
-
- retval = mdio_register(mdiodev);
- if (retval < 0)
- return retval;
-
- for (k = 0; k < 32; ++k) {
- configure_gbit_phy(CONFIG_SYS_GBIT_MII_BUSNAME, k);
- putc('\b');
- putc(slash[k % 8]);
- }
-
- mdiodev = mdio_alloc();
- if (!mdiodev)
- return -ENOMEM;
- strncpy(mdiodev->name, CONFIG_SYS_GBIT_MII1_BUSNAME, MDIO_NAME_LEN);
- mdiodev->read = bb_miiphy_read;
- mdiodev->write = bb_miiphy_write;
-
- retval = mdio_register(mdiodev);
- if (retval < 0)
- return retval;
-
- for (k = 0; k < 32; ++k) {
- configure_gbit_phy(CONFIG_SYS_GBIT_MII1_BUSNAME, k);
- putc('\b');
- putc(slash[k % 8]);
- }
- blank_string(strlen(str_phys));
-
- /* take fpga serdes blocks out of reset */
- puts(str_serdes);
- udelay(500000);
- FPGA_SET_REG(0, quad_serdes_reset, 0);
- FPGA_SET_REG(1, quad_serdes_reset, 0);
- blank_string(strlen(str_serdes));
-
- /* take channels out of reset */
- puts(str_channels);
- udelay(500000);
- for (fpga = 0; fpga < 2; ++fpga) {
- for (k = 0; k < 32; ++k)
- FPGA_SET_REG(fpga, ch[k].config_int, 0);
- }
- blank_string(strlen(str_channels));
-
- /* verify channels serdes lock */
- puts(str_locks);
- udelay(500000);
- for (fpga = 0; fpga < 2; ++fpga) {
- for (k = 0; k < 32; ++k) {
- u16 status;
- FPGA_GET_REG(fpga, ch[k].status_int, &status);
- if (!(status & (1 << 4))) {
- failed = 1;
- printf("fpga %d channel %d: no serdes lock\n",
- fpga, k);
- }
- /* reset events */
- FPGA_SET_REG(fpga, ch[k].status_int, 0);
- }
- }
- blank_string(strlen(str_locks));
-
- /* verify hicb_status */
- puts(str_hicb);
- for (fpga = 0; fpga < 2; ++fpga) {
- for (k = 0; k < 32; ++k) {
- u16 status;
- FPGA_GET_REG(fpga, hicb_ch[k].status_int, &status);
- if (status)
- printf("fpga %d hicb %d: hicb status %04x\n",
- fpga, k, status);
- /* reset events */
- FPGA_SET_REG(fpga, hicb_ch[k].status_int, 0);
- }
- }
- blank_string(strlen(str_hicb));
-
- /* verify phy status */
- puts(str_status);
- for (k = 0; k < 32; ++k) {
- if (verify_gbit_phy(CONFIG_SYS_GBIT_MII_BUSNAME, k)) {
- printf("verify baseboard phy %d failed\n", k);
- failed = 1;
- }
- putc('\b');
- putc(slash[k % 8]);
- }
- for (k = 0; k < 32; ++k) {
- if (verify_gbit_phy(CONFIG_SYS_GBIT_MII1_BUSNAME, k)) {
- printf("verify extensionboard phy %d failed\n", k);
- failed = 1;
- }
- putc('\b');
- putc(slash[k % 8]);
- }
- blank_string(strlen(str_status));
-
- printf("Starting 64 channels %s\n", failed ? "failed" : "ok");
-
- return 0;
-}
-
-void gd405ex_init(void)
-{
- unsigned int k;
-
- if (i2c_probe(0x22)) { /* i2c_probe returns 0 on success */
- for (k = 0; k < CONFIG_SYS_FPGA_COUNT; ++k)
- gd->arch.fpga_state[k] |= FPGA_STATE_PLATFORM;
- } else {
- pca9698_direction_output(0x22, 39, 1);
- }
-}
-
-void gd405ex_set_fpga_reset(unsigned state)
-{
- int legacy = get_fpga_state(0) & FPGA_STATE_PLATFORM;
-
- if (legacy) {
- if (state) {
- out_le16((void *)LATCH0_BASE, CONFIG_SYS_LATCH0_RESET);
- out_le16((void *)LATCH1_BASE, CONFIG_SYS_LATCH1_RESET);
- } else {
- out_le16((void *)LATCH0_BASE, CONFIG_SYS_LATCH0_BOOT);
- out_le16((void *)LATCH1_BASE, CONFIG_SYS_LATCH1_BOOT);
- }
- } else {
- pca9698_set_value(0x22, 39, state ? 0 : 1);
- }
-}
-
-void gd405ex_setup_hw(void)
-{
- gpio_write_bit(CONFIG_SYS_GPIO_STARTUP_FINISHED_N, 0);
- gpio_write_bit(CONFIG_SYS_GPIO_STARTUP_FINISHED, 1);
-}
-
-int gd405ex_get_fpga_done(unsigned fpga)
-{
- int legacy = get_fpga_state(0) & FPGA_STATE_PLATFORM;
-
- if (legacy)
- return in_le16((void *)LATCH3_BASE)
- & CONFIG_SYS_FPGA_DONE(fpga);
- else
- return pca9698_get_value(0x22, fpga ? 9 : 8);
-}